Sang-Doc Han, Phil Heo, Han-Joong Kim, Hyunwoo Song, Donghyuk Kim, Jeung-Hoon Seo, Yeunchul Ryu, Young Noh, Kyoung-Nam Kim
{"title":"采用频率可选pin二极管控制的7-T MRI双层双调谐射频线圈","authors":"Sang-Doc Han, Phil Heo, Han-Joong Kim, Hyunwoo Song, Donghyuk Kim, Jeung-Hoon Seo, Yeunchul Ryu, Young Noh, Kyoung-Nam Kim","doi":"10.1002/cmr.b.21363","DOIUrl":null,"url":null,"abstract":"<p>This article presents a dual-tuned (DT) radiofrequency (RF) coil for signal acquisition of 2 nuclei, namely, hydrogen (<sup>1</sup>H) and sodium (<sup>23</sup>Na), in the ultra-high magnetic field of a 7-T magnetic resonance imaging (MRI) system. The double-layered dual-tuned (DLDT) coil comprises a 2-loop coil configuration per single-pair geometry, with the <sup>1</sup>H and <sup>23</sup>Na coils being located on the outside and inside, respectively. The <sup>1</sup>H and <sup>23</sup>Na single-pair elements are tuned to resonance frequencies of 297.20 and 78.61 MHz, respectively. The single-pair geometry of the DLDT coil is extended to an 8-pair configuration to cover the human head, and the operation mode is transmission/reception (Tx/Rx). The 8-pair DLDT Tx/Rx coil array is designed with a non-overlapped single pair between the <sup>1</sup>H coil elements for geometric decoupling, and capacitive decoupling is implemented to minimize the mutual inductance coupling. The 2 resonance frequencies are fed through a single RF port to a common matching board, and each frequency is selected using the voltages at both ends of a PIN diode. Through use of the PIN diode in the DLDT coil configuration, with a voltage drop at both ends, different resonance frequencies can be selected for each coil element in accordance with the diode ON/OFF state. The experiments conducted showed that the proposed DLDT coil is effective in acquiring signals of <sup>1</sup>H and <sup>23</sup>Na in the MRI system.</p>","PeriodicalId":50623,"journal":{"name":"Concepts in Magnetic Resonance Part B-Magnetic Resonance Engineering","volume":"47B 4","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2018-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1002/cmr.b.21363","citationCount":"13","resultStr":"{\"title\":\"Double-layered dual-tuned RF coil using frequency-selectable PIN-diode control at 7-T MRI\",\"authors\":\"Sang-Doc Han, Phil Heo, Han-Joong Kim, Hyunwoo Song, Donghyuk Kim, Jeung-Hoon Seo, Yeunchul Ryu, Young Noh, Kyoung-Nam Kim\",\"doi\":\"10.1002/cmr.b.21363\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>This article presents a dual-tuned (DT) radiofrequency (RF) coil for signal acquisition of 2 nuclei, namely, hydrogen (<sup>1</sup>H) and sodium (<sup>23</sup>Na), in the ultra-high magnetic field of a 7-T magnetic resonance imaging (MRI) system. The double-layered dual-tuned (DLDT) coil comprises a 2-loop coil configuration per single-pair geometry, with the <sup>1</sup>H and <sup>23</sup>Na coils being located on the outside and inside, respectively. The <sup>1</sup>H and <sup>23</sup>Na single-pair elements are tuned to resonance frequencies of 297.20 and 78.61 MHz, respectively. The single-pair geometry of the DLDT coil is extended to an 8-pair configuration to cover the human head, and the operation mode is transmission/reception (Tx/Rx). The 8-pair DLDT Tx/Rx coil array is designed with a non-overlapped single pair between the <sup>1</sup>H coil elements for geometric decoupling, and capacitive decoupling is implemented to minimize the mutual inductance coupling. The 2 resonance frequencies are fed through a single RF port to a common matching board, and each frequency is selected using the voltages at both ends of a PIN diode. Through use of the PIN diode in the DLDT coil configuration, with a voltage drop at both ends, different resonance frequencies can be selected for each coil element in accordance with the diode ON/OFF state. The experiments conducted showed that the proposed DLDT coil is effective in acquiring signals of <sup>1</sup>H and <sup>23</sup>Na in the MRI system.</p>\",\"PeriodicalId\":50623,\"journal\":{\"name\":\"Concepts in Magnetic Resonance Part B-Magnetic Resonance Engineering\",\"volume\":\"47B 4\",\"pages\":\"\"},\"PeriodicalIF\":0.9000,\"publicationDate\":\"2018-05-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1002/cmr.b.21363\",\"citationCount\":\"13\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Concepts in Magnetic Resonance Part B-Magnetic Resonance Engineering\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1002/cmr.b.21363\",\"RegionNum\":4,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Concepts in Magnetic Resonance Part B-Magnetic Resonance Engineering","FirstCategoryId":"3","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/cmr.b.21363","RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
Double-layered dual-tuned RF coil using frequency-selectable PIN-diode control at 7-T MRI
This article presents a dual-tuned (DT) radiofrequency (RF) coil for signal acquisition of 2 nuclei, namely, hydrogen (1H) and sodium (23Na), in the ultra-high magnetic field of a 7-T magnetic resonance imaging (MRI) system. The double-layered dual-tuned (DLDT) coil comprises a 2-loop coil configuration per single-pair geometry, with the 1H and 23Na coils being located on the outside and inside, respectively. The 1H and 23Na single-pair elements are tuned to resonance frequencies of 297.20 and 78.61 MHz, respectively. The single-pair geometry of the DLDT coil is extended to an 8-pair configuration to cover the human head, and the operation mode is transmission/reception (Tx/Rx). The 8-pair DLDT Tx/Rx coil array is designed with a non-overlapped single pair between the 1H coil elements for geometric decoupling, and capacitive decoupling is implemented to minimize the mutual inductance coupling. The 2 resonance frequencies are fed through a single RF port to a common matching board, and each frequency is selected using the voltages at both ends of a PIN diode. Through use of the PIN diode in the DLDT coil configuration, with a voltage drop at both ends, different resonance frequencies can be selected for each coil element in accordance with the diode ON/OFF state. The experiments conducted showed that the proposed DLDT coil is effective in acquiring signals of 1H and 23Na in the MRI system.
期刊介绍:
Concepts in Magnetic Resonance Part B brings together engineers and physicists involved in the design and development of hardware and software employed in magnetic resonance techniques. The journal welcomes contributions predominantly from the fields of magnetic resonance imaging (MRI), nuclear magnetic resonance (NMR), and electron paramagnetic resonance (EPR), but also encourages submissions relating to less common magnetic resonance imaging and analytical methods.
Contributors come from both academia and industry, to report the latest advancements in the development of instrumentation and computer programming to underpin medical, non-medical, and analytical magnetic resonance techniques.