INFLUENCE OF ANALYSIS RESULTS OF ANALYTICAL COAL SAMPLES ON THE PREDICTION ACCURACY OF HAZARDOUS PROPERTIES OF COAL SEAMS

Abstract

Purpose: to establish possible quantitative errors in determining the values of some indicators of the degree of metamorphism without attracting the content of total moisture and mineral impurities to predict the hazardous properties of coal mine layers during mining. Methodology: based on the use of initial data on the quality indicators and properties of coals for specific coal seams, given in the reference sources, with the subsequent recalculation of the state of samples from their dry ashless or ashless state to the raw state. Comparison of the samples of indicators were determined, respectively, using analytical samples and based on the results of recalculation to the initial state (close to the production state), conclusions were drawn about possible errors in the case of using the analysis results of the analytical samples to predict hazardous properties of mines. Results: The analytical state of the samples for dry ashless state (daf) or wet ashless state (af) does not correspond to the state of coal in the working area of mining operations (r), which most accurately characterizes the manifestation of mine hazardous properties. The indicators of the release of volatile substances during thermal decomposition of coals, which are used to predict the hazardous properties of mine coal seams, do not directly reflect changes in the elemental composition of coals during metamorphic transformations. Methods for preparing analytical samples provide for grinding to small fractions, removing external moisture and enriching to ash content less than 10%, which does not correspond to the state of coal (r) in the mining area. The use of indicators set for dry ashless combustible (organic) mass excludes the possibility of analyzing the influence of moisture and mineral impurities on the manifestation of the hazardous properties of coal seams. The use of such indicators to predict the hazardous properties of mine coal seams can lead to errors in their determination of 45 ÷ 50%. The hazardous properties of coal seams can be adequately characterized only by the combined composition and properties of organic matter and mineral impurities in a state close to the presence of coal in the mining area. Using the example of possible significant errors in the calorific value, in the case of its use to characterize the hazardous properties of coal mine seams, the expediency of scientific substantiation of a set of indicators for a reliable forecast of a specific hazardous property for a specific seam formation was proved. Scientific novelty: hazardous properties of coal seams are reliably predicted on the basis of the composition and properties of organic and mineral components, reduced to conditions close to the state during mining operations. Practical value: the results obtained give grounds to scientifically substantiate the selection of the necessary indicators for predicting a specific hazardous property of coal seams and make proposals for improving the regulatory framework for the safe conduct of mining operations.