{"title":"Solder paramater sensitivity for Package-on-Package (POP) on fatigue life prediction","authors":"Li Bin, Ong Kang Eu, I. Azid","doi":"10.1109/IEMT.2012.6521831","DOIUrl":null,"url":null,"abstract":"Due to requirements of cost-saving and miniaturization, Package-on-Package (PoP) has recently gained popularity in many applications. However, its board level solder joint reliability during the thermal cycling test is not as well-studied as common single die BGA.. In this research, solder joint fatigue life of PoP is analyzed in detail. 3D model is established for PoP by using ABAQUS design software with consideration of detailed design, realistic shape of solder ball and non-linear material properties. The fatigue model is based on the Hyperbolic Sine Creep Model and it is taken from the works of Park,Hong and Lau. [1] The critical solder ball is observed located at the inner ring of bottom solder balls which is in between SPBGA and test board. The results show that in general, solder ball diameter has no much effect on its fatigue life..","PeriodicalId":315408,"journal":{"name":"2012 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT)","volume":"41 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2012-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2012 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IEMT.2012.6521831","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
Due to requirements of cost-saving and miniaturization, Package-on-Package (PoP) has recently gained popularity in many applications. However, its board level solder joint reliability during the thermal cycling test is not as well-studied as common single die BGA.. In this research, solder joint fatigue life of PoP is analyzed in detail. 3D model is established for PoP by using ABAQUS design software with consideration of detailed design, realistic shape of solder ball and non-linear material properties. The fatigue model is based on the Hyperbolic Sine Creep Model and it is taken from the works of Park,Hong and Lau. [1] The critical solder ball is observed located at the inner ring of bottom solder balls which is in between SPBGA and test board. The results show that in general, solder ball diameter has no much effect on its fatigue life..
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
