A W-Band x12 Frequency Multiplier MMIC in Waveguide Package Using Quartz and Ceramic Transitions

R. Weber, A. Tessmann, M. Zink, M. Kuri, I. Kallfass, H. Stulz, M. Riessle, H. Massler, T. Maier, A. Leuther, M. Schlechtweg
{"title":"A W-Band x12 Frequency Multiplier MMIC in Waveguide Package Using Quartz and Ceramic Transitions","authors":"R. Weber, A. Tessmann, M. Zink, M. Kuri, I. Kallfass, H. Stulz, M. Riessle, H. Massler, T. Maier, A. Leuther, M. Schlechtweg","doi":"10.1109/CSICS.2011.6062475","DOIUrl":null,"url":null,"abstract":"This paper describes a single-chip W-band frequency multiplier MMIC in a waveguide package. The multiplication factor by 12 has been obtained with a doubler, tripler and doubler chain. The MMIC has been realized in a 100 nm metamorphic HEMT technology. It has been packaged in a split-block module using a high precision 50 µm thick quartz transition for the W-band output and a low cost ceramic transition on the input. A power supply board, embedded in the module, provides six different voltages to the MMIC. The packaged frequency multiplier achieves an output power of -0.8 dBm, a conversion gain of 0.2 dB and a 3-dB bandwidth of 16 GHz from 86 to 102 GHz with a suppression of the unwanted harmonics of more than 25.5 dBc. The phase-noise of the output signal is not affected by the multiplier circuit.","PeriodicalId":275064,"journal":{"name":"2011 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS)","volume":"126 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2011-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"21","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2011 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CSICS.2011.6062475","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 21

Abstract

This paper describes a single-chip W-band frequency multiplier MMIC in a waveguide package. The multiplication factor by 12 has been obtained with a doubler, tripler and doubler chain. The MMIC has been realized in a 100 nm metamorphic HEMT technology. It has been packaged in a split-block module using a high precision 50 µm thick quartz transition for the W-band output and a low cost ceramic transition on the input. A power supply board, embedded in the module, provides six different voltages to the MMIC. The packaged frequency multiplier achieves an output power of -0.8 dBm, a conversion gain of 0.2 dB and a 3-dB bandwidth of 16 GHz from 86 to 102 GHz with a suppression of the unwanted harmonics of more than 25.5 dBc. The phase-noise of the output signal is not affected by the multiplier circuit.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
使用石英和陶瓷转换的波导封装中的w波段x12倍频MMIC
本文介绍了一种波导封装的单片w波段倍频器MMIC。用倍、三倍、三倍链得到了乘以12的倍数。MMIC已在100 nm的变质HEMT技术上实现。它被封装在分块模块中,使用高精度50 μ m厚的石英转换用于w波段输出,并在输入端使用低成本的陶瓷转换。电源板嵌入在模块中,为MMIC提供6种不同的电压。封装的倍频器输出功率为-0.8 dBm,转换增益为0.2 dB, 3db带宽为16ghz(从86 GHz到102 GHz),抑制不需要的谐波超过25.5 dBc。输出信号的相位噪声不受乘法器电路的影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
A Q-Band Amplifier Implemented with Stacked 45-nm CMOS FETs Degradation of AlGaN/GaN High Electron Mobility Transistors from X-Band Operation Applications of SOI Technologies to Communication A 42 GHz Amplifier Designed Using Common-Gate Load Pull A 75 mW 210 GHz Power Amplifier Module
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1