Fang-Li Yuan, Yi-Hsien Lin, Chih-Feng Wu, M. Shiue, Chorng-Kuang Wang
{"title":"A 256-point dataflow scheduling 2×2 MIMO FFT/IFFT processor for IEEE 802.16 WMAN","authors":"Fang-Li Yuan, Yi-Hsien Lin, Chih-Feng Wu, M. Shiue, Chorng-Kuang Wang","doi":"10.1109/ASSCC.2008.4708789","DOIUrl":null,"url":null,"abstract":"In this paper, an efficient solution of MIMO FFT/IFFT processor for IEEE 802.16 WMAN is presented. By applying the proposed mixed-radix dataflow scheduling (MRDS) technique, the effective hardware utilization can be raised to 100%. Therefore, a single butterfly unit within each pipeline stage is sufficient to deal with the two data sequences, and the hardware complexity is significantly reduced. The proposed FFT/IFFT processor has been emulated on the FPGA board. The signal-to-quantization noise ratio (SQNR) is over 44 dB for QPSK and 16/64-QAM signals. Furthermore, a test chip has been designed using standard 0.18-mum CMOS technology with a core area of 887 times 842 mum2. According to the post-layout simulation results, the design consumes 46 mW at 64 MHz operating frequency, which meets the maximum throughput requirements of IEEE 802.16 WMAN.","PeriodicalId":143173,"journal":{"name":"2008 IEEE Asian Solid-State Circuits Conference","volume":"96 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-12-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"14","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 IEEE Asian Solid-State Circuits Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ASSCC.2008.4708789","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 14
Abstract
In this paper, an efficient solution of MIMO FFT/IFFT processor for IEEE 802.16 WMAN is presented. By applying the proposed mixed-radix dataflow scheduling (MRDS) technique, the effective hardware utilization can be raised to 100%. Therefore, a single butterfly unit within each pipeline stage is sufficient to deal with the two data sequences, and the hardware complexity is significantly reduced. The proposed FFT/IFFT processor has been emulated on the FPGA board. The signal-to-quantization noise ratio (SQNR) is over 44 dB for QPSK and 16/64-QAM signals. Furthermore, a test chip has been designed using standard 0.18-mum CMOS technology with a core area of 887 times 842 mum2. According to the post-layout simulation results, the design consumes 46 mW at 64 MHz operating frequency, which meets the maximum throughput requirements of IEEE 802.16 WMAN.