A Microfabricated Direct Methanol Fuel Cell with Integrated Electroosmotic Pump

19th IEEE International Conference on Micro Electro Mechanical Systems Pub Date : 2006-05-08 DOI:10.1109/MEMSYS.2006.1627955

C. Buie, Y. Banin, C. Tang, J. Santiago, F. Prinz, B. Pruitt

引用次数: 5

Abstract

This paper reports a novel design, and subsequent performance results, for a direct methanol fuel cell (DMFC) with a planar silicon electroosmotic (EO) pump for methanol fuel delivery. EO pumps possess no moving parts, produce flow rates on the order of several ml/min, and can be microfabricated from silicon substrates. Maximum flow rates from the EO pumps ranged from 0.25 ml/min to 10 ml/min at applied voltages ranging from 40 V – 100 V with deionized water as the working fluid. The maximum power density of the DMFC is 17.8 mW/cm2at room temperature.

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

集成电渗透泵的微型直接甲醇燃料电池

本文报道了一种具有平面硅电渗透(EO)泵的直接甲醇燃料电池(DMFC)的新设计和随后的性能结果。EO泵没有运动部件，产生几毫升/分钟的流量，并且可以从硅衬底微制造。以去离子水为工作流体，施加电压为40 V - 100 V时，EO泵的最大流量范围为0.25 ml/min至10 ml/min。室温下DMFC的最大功率密度为17.8 mW/cm2。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文去求助

来源期刊

19th IEEE International Conference on Micro Electro Mechanical Systems

自引率

0.00%

发文量

期刊最新文献

High Resolution and S/N Ratio Nano Probing System Development of Methanol Steam Reforming System Integrated with Catalytic Combustor Using Carbon Nanotubes as Catalyst Supports Density Control of Carbon Nanotubes Using Ethanol Vapor Flow Muscle Proteins as High Speed Nano Transporters on Micro Patterns Insertion Force Sensor by Sidewall-Doping with Rapid Thermal Diffusion