Aerodynamics of a High-Speed Low-Pressure Turbine Cascade With Cavity Purge and Unsteady Wakes

IF 1.9 3区 工程技术 Q3 ENGINEERING, MECHANICAL Journal of Turbomachinery-Transactions of the Asme Pub Date : 2023-11-13 DOI:10.1115/1.4063878
Gustavo Lopes, Loris Simonasis, Sergio Lavagnoli
{"title":"Aerodynamics of a High-Speed Low-Pressure Turbine Cascade With Cavity Purge and Unsteady Wakes","authors":"Gustavo Lopes, Loris Simonasis, Sergio Lavagnoli","doi":"10.1115/1.4063878","DOIUrl":null,"url":null,"abstract":"Abstract The time-averaged aerodynamics of a high-speed low-pressure turbine (LPT) cascade were investigated under the impact of unsteady wakes and purge flows. The tests were performed at an outlet Mach (M) and Reynolds numbers (Re) of 0.90 and 70 k, respectively. Unsteady wakes were simulated by means of a spoked-wheel type wake generator (WG), and a reduced frequency of 0.95 was achieved. The development of a purge flow system to operate at low-pressure levels is presented alongside guidelines for the operation of the circuit. The new purge system was commissioned in terms of its long-term stability and flow uniformity at the cascade inlet. The impact of varying purge flows from a cavity versus a flat endwall was assessed by means of static pressure measurements on the blade pressure side (PS) and suction side (SS) and traverses performed downstream with a miniaturized multi-hole probe. Differences in the secondary flow structures resultant from injecting purge flow into the flowfield are observed, namely, the intensification of the trailing shed vortex (TSV) and passage vortex (PV) that is also displaced away from the endwall. An increase of the endwall losses occurs as the flat endwall was replaced with a cavity geometry and the cavity purge flowrate increases.","PeriodicalId":49966,"journal":{"name":"Journal of Turbomachinery-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2023-11-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Turbomachinery-Transactions of the Asme","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/1.4063878","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Abstract The time-averaged aerodynamics of a high-speed low-pressure turbine (LPT) cascade were investigated under the impact of unsteady wakes and purge flows. The tests were performed at an outlet Mach (M) and Reynolds numbers (Re) of 0.90 and 70 k, respectively. Unsteady wakes were simulated by means of a spoked-wheel type wake generator (WG), and a reduced frequency of 0.95 was achieved. The development of a purge flow system to operate at low-pressure levels is presented alongside guidelines for the operation of the circuit. The new purge system was commissioned in terms of its long-term stability and flow uniformity at the cascade inlet. The impact of varying purge flows from a cavity versus a flat endwall was assessed by means of static pressure measurements on the blade pressure side (PS) and suction side (SS) and traverses performed downstream with a miniaturized multi-hole probe. Differences in the secondary flow structures resultant from injecting purge flow into the flowfield are observed, namely, the intensification of the trailing shed vortex (TSV) and passage vortex (PV) that is also displaced away from the endwall. An increase of the endwall losses occurs as the flat endwall was replaced with a cavity geometry and the cavity purge flowrate increases.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
具有空腔吹扫和非定常尾迹的高速低压涡轮叶栅空气动力学
摘要研究了高速低压涡轮叶栅在非定常尾迹和吹扫流影响下的时均气动特性。在出口马赫数(M)和雷诺数(Re)分别为0.90和70 k的条件下进行试验。采用辐条轮式尾迹发生器(WG)模拟非定常尾迹,得到了0.95的降频。在低压水平下运行的吹扫流系统的开发与电路操作指南一起提出。新的吹扫系统在叶栅进口的长期稳定性和流动均匀性方面进行了调试。通过对叶片压力侧(PS)和吸力侧(SS)进行静压测量,并使用小型多孔探头对下游进行遍行,评估了不同吹扫流量对空腔和平端壁的影响。观察到在流场中注入吹扫流所导致的二次流结构的不同,即尾棚涡(TSV)和通道涡(PV)的增强,它们也被移离了端壁。当平面端壁被空腔取代时,端壁损失增加,空腔吹扫流量增加。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
4.70
自引率
11.80%
发文量
168
审稿时长
9 months
期刊介绍: The Journal of Turbomachinery publishes archival-quality, peer-reviewed technical papers that advance the state-of-the-art of turbomachinery technology related to gas turbine engines. The broad scope of the subject matter includes the fluid dynamics, heat transfer, and aeromechanics technology associated with the design, analysis, modeling, testing, and performance of turbomachinery. Emphasis is placed on gas-path technologies associated with axial compressors, centrifugal compressors, and turbines. Topics: Aerodynamic design, analysis, and test of compressor and turbine blading; Compressor stall, surge, and operability issues; Heat transfer phenomena and film cooling design, analysis, and testing in turbines; Aeromechanical instabilities; Computational fluid dynamics (CFD) applied to turbomachinery, boundary layer development, measurement techniques, and cavity and leaking flows.
期刊最新文献
A Numerical Test Rig for Turbomachinery Flows Based on Large Eddy Simulations With a High-Order Discontinuous Galerkin Scheme - Part 3: Secondary Flow Effects UNDERSTANDING THERMAL UNSTEADINESS IN ENGINE REPRESENTATIVE FLOWS AND IMPROVED METHODOLOGIES FOR DERIVED HEAT TRANSFER CALCULATIONS USING THIN-FILM GAUGES A Numerical Test Rig for Turbomachinery Flows Based on Large Eddy Simulations With a High-Order Discontinuous Galerkin Scheme - Part 1: Sliding Interfaces and Unsteady Row Interactions Aerodynamics of a High-Speed Low-Pressure Turbine Cascade With Cavity Purge and Unsteady Wakes A Numerical Test Rig for Turbomachinery Flows Based on Large Eddy Simulations With a High-Order Discontinuous Galerkin Scheme - Part 2: Shock-Capturing and Transonic Flows
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1