Simulation of blood flow in a stenosed and bifurcating artery using Finite Volume Methods and OpenFOAM

IF 2.7 2区 工程技术 Q2 MECHANICS Journal of Non-Newtonian Fluid Mechanics Pub Date : 2023-11-23 DOI:10.1016/j.jnnfm.2023.105157
Sunitha Nagarathnam, Tiri Chinyoka
{"title":"Simulation of blood flow in a stenosed and bifurcating artery using Finite Volume Methods and OpenFOAM","authors":"Sunitha Nagarathnam,&nbsp;Tiri Chinyoka","doi":"10.1016/j.jnnfm.2023.105157","DOIUrl":null,"url":null,"abstract":"<div><p><span>The article focuses on the shear-thinning and viscoelastic constitutive modelling and numerical simulation of blood flow in a stenosed and bifurcating artery. Specifically, the shear-thinning and viscoelastic behaviour of blood are modelled and implemented via the Oldroyd-B and Generalized Oldroyd-B constitutive models. A robust and efficient general purpose numerical (and computational) methodology for the simulation of blood flow in a stenosed and bifurcating artery is also developed and implemented. The numerical algorithm is developed more generally to resolve the mathematical model equations arising out of the all-encompassing Generalized Giesekus constitutive model. This model reduces to the Generalized Oldroyd-B model and subsequently also to the standard Oldroyd-B model simply by switching off certain material parameters. The inclusion of the Generalized Giesekus model must therefore be viewed in this context, to facilitate the development of an all encompassing general purpose numerical code. The blood flow modelling is otherwise done via the Oldroyd-B and Generalized Oldroyd-B constitutive models. The shear-thinning effects are implemented via the Cross model for shear-viscosity. The Generalized Oldroyd-B model results all illustrate that the velocity is directly proportional to the constriction caused by the stenosis. The higher the blockage from the constriction, the higher would the velocity spurt through the constriction. This velocity behaviour correspondingly enhances the wall shear-stresses as the constriction increases, caused by the presence of the stenosis. High wall shear-stresses greatly increase the possibility of rupture of the stenosis. This can lead to </span>catastrophic consequences in the usual case where the stenosis is caused, say, by tumor growth. As demonstrated near the contraction of a standard 4:1 contraction flow geometry, dramatic fluid flow effects, which are attributable to the polymeric-stresses, specifically to the first normal stress difference, are observed in the vicinity of the constrictions resulting from the presence of the stenosis. Such effects, include, flow recirculation and reversal, vortex formation, and spurt phenomena.</p></div>","PeriodicalId":54782,"journal":{"name":"Journal of Non-Newtonian Fluid Mechanics","volume":"322 ","pages":"Article 105157"},"PeriodicalIF":2.7000,"publicationDate":"2023-11-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Non-Newtonian Fluid Mechanics","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0377025723001702","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

The article focuses on the shear-thinning and viscoelastic constitutive modelling and numerical simulation of blood flow in a stenosed and bifurcating artery. Specifically, the shear-thinning and viscoelastic behaviour of blood are modelled and implemented via the Oldroyd-B and Generalized Oldroyd-B constitutive models. A robust and efficient general purpose numerical (and computational) methodology for the simulation of blood flow in a stenosed and bifurcating artery is also developed and implemented. The numerical algorithm is developed more generally to resolve the mathematical model equations arising out of the all-encompassing Generalized Giesekus constitutive model. This model reduces to the Generalized Oldroyd-B model and subsequently also to the standard Oldroyd-B model simply by switching off certain material parameters. The inclusion of the Generalized Giesekus model must therefore be viewed in this context, to facilitate the development of an all encompassing general purpose numerical code. The blood flow modelling is otherwise done via the Oldroyd-B and Generalized Oldroyd-B constitutive models. The shear-thinning effects are implemented via the Cross model for shear-viscosity. The Generalized Oldroyd-B model results all illustrate that the velocity is directly proportional to the constriction caused by the stenosis. The higher the blockage from the constriction, the higher would the velocity spurt through the constriction. This velocity behaviour correspondingly enhances the wall shear-stresses as the constriction increases, caused by the presence of the stenosis. High wall shear-stresses greatly increase the possibility of rupture of the stenosis. This can lead to catastrophic consequences in the usual case where the stenosis is caused, say, by tumor growth. As demonstrated near the contraction of a standard 4:1 contraction flow geometry, dramatic fluid flow effects, which are attributable to the polymeric-stresses, specifically to the first normal stress difference, are observed in the vicinity of the constrictions resulting from the presence of the stenosis. Such effects, include, flow recirculation and reversal, vortex formation, and spurt phenomena.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
用有限体积法和OpenFOAM模拟狭窄和分叉动脉的血流
本文主要研究了狭窄和分叉动脉血流的剪切减薄和粘弹性本构模型和数值模拟。具体来说,通过Oldroyd-B和广义Oldroyd-B本构模型模拟和实现了血液的剪切变薄和粘弹性行为。一种鲁棒和高效的通用数值(和计算)方法,用于模拟狭窄和分叉动脉的血流,也被开发和实现。数值算法更广泛地用于求解由包罗万象的广义Giesekus本构模型引起的数学模型方程。这个模型可以简化为广义的Oldroyd-B模型,然后通过简单地关闭某些材料参数也可以简化为标准的Oldroyd-B模型。因此,必须在这种背景下看待广义Giesekus模型的包含,以便于开发一个包罗万象的通用数字代码。血流模型是通过Oldroyd-B和广义Oldroyd-B本构模型来完成的。剪切减薄效应通过剪切黏度的Cross模型实现。广义oldyd - b模型的结果都表明,速度与狭窄引起的收缩成正比。收缩处的阻塞越高,通过收缩处喷出的速度就越高。由于狭窄的存在,随着收缩的增加,这种速度行为相应地增强了壁面的剪切应力。高壁剪应力大大增加了狭窄破裂的可能性。在通常情况下,如果狭窄是由肿瘤生长引起的,这可能会导致灾难性的后果。正如在标准4:1收缩流动几何形状的收缩附近所显示的那样,在狭窄造成的收缩附近观察到剧烈的流体流动效应,这是由于聚合物应力,特别是第一个正常应力差造成的。这些影响包括流动再循环和反转、漩涡形成和喷射现象。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
5.00
自引率
19.40%
发文量
109
审稿时长
61 days
期刊介绍: The Journal of Non-Newtonian Fluid Mechanics publishes research on flowing soft matter systems. Submissions in all areas of flowing complex fluids are welcomed, including polymer melts and solutions, suspensions, colloids, surfactant solutions, biological fluids, gels, liquid crystals and granular materials. Flow problems relevant to microfluidics, lab-on-a-chip, nanofluidics, biological flows, geophysical flows, industrial processes and other applications are of interest. Subjects considered suitable for the journal include the following (not necessarily in order of importance): Theoretical, computational and experimental studies of naturally or technologically relevant flow problems where the non-Newtonian nature of the fluid is important in determining the character of the flow. We seek in particular studies that lend mechanistic insight into flow behavior in complex fluids or highlight flow phenomena unique to complex fluids. Examples include Instabilities, unsteady and turbulent or chaotic flow characteristics in non-Newtonian fluids, Multiphase flows involving complex fluids, Problems involving transport phenomena such as heat and mass transfer and mixing, to the extent that the non-Newtonian flow behavior is central to the transport phenomena, Novel flow situations that suggest the need for further theoretical study, Practical situations of flow that are in need of systematic theoretical and experimental research. Such issues and developments commonly arise, for example, in the polymer processing, petroleum, pharmaceutical, biomedical and consumer product industries.
期刊最新文献
A lattice Boltzmann flux solver with log-conformation representation for the simulations of viscoelastic flows at high Weissenberg numbers Analysis of the shear thickening behavior of a fumed silica suspension using QL-LAOS approach Suppression and augmentation in vortex shedding frequency due to fluid elasticity The influence of thixotropy on bubble growth in thixotropic yield stress fluids: Insights from numerical simulations Viscoelastic model hierarchy for fiber melt spinning of semi-crystalline polymers
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1