{"title":"Study on performance regulation of electro-mechanical properties 3D printed BaTiO3/HA porous structure composite ceramic","authors":"Xin Zhao , Jimin Chen , Yong Zeng","doi":"10.1016/j.ceramint.2024.09.243","DOIUrl":null,"url":null,"abstract":"<div><div>BaTiO<sub>3</sub>/Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> composite ceramic is an outstanding representative of piezoelectric biomaterials, with excellent biocompatibility and piezoelectric effect, and has potential applications in the field of bone tissue repair. In this work, vat photopolymerization 3D printing technology was used to fabricate triply periodic minimal surface structure BaTiO<sub>3</sub>/Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> composite ceramic bone tissue scaffolds with different pore sizes and porosity, and their mechanical and electrical properties were studied. First, the ceramic slurry configuration process was optimized to obtain a ceramic slurry with high solid content (45 vol%) and excellent rheological properties. Then the effect of sintering temperature on microstructure, relative density, mechanical properties, and electrical properties is discussed. The results show that when sintering at 1300 °C, the BaTiO<sub>3</sub>/Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> composite ceramic has the highest relative density (99.18 %), the highest compressive strength (44 MPa), large relative dielectric constant (379–389), and low dielectric loss. The polarization electric field strength of the BaTiO<sub>3</sub>/Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> composite ceramic was set to 15 kV/cm through the test of the hysteresis loop. Finally, based on multi-physics coupled finite element simulation, the effects of different porosity and different pore sizes on stress distribution and piezoelectric potential were analyzed, and the relationship between them was explored through experiments. The results show that as the porosity increases and the pore size decreases, the mechanical properties of the scaffold decrease significantly, and its compressive strength ranges between 1.67 and 4.26 MPa; as the porosity increases and the pore size increases, the piezoelectric coefficient (<em>d</em><sub><strong><em>33</em></strong></sub>) of the scaffold showed a decreasing trend, and its <em>d</em><sub><strong><em>33</em></strong></sub> ranged between 2 and 9 pC/N. The mechanical and electrical properties of the scaffold meet the performance requirements of cancellous bone. In summary, this work provides a strategy for the application of customized BaTiO<sub>3</sub>/Ca<sub>10</sub>(PO<sub>4</sub>)<sub>6</sub>(OH)<sub>2</sub> composite ceramic scaffolds in new-generation orthopedic implants.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 23","pages":"Pages 49021-49032"},"PeriodicalIF":5.1000,"publicationDate":"2024-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224042500","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
BaTiO3/Ca10(PO4)6(OH)2 composite ceramic is an outstanding representative of piezoelectric biomaterials, with excellent biocompatibility and piezoelectric effect, and has potential applications in the field of bone tissue repair. In this work, vat photopolymerization 3D printing technology was used to fabricate triply periodic minimal surface structure BaTiO3/Ca10(PO4)6(OH)2 composite ceramic bone tissue scaffolds with different pore sizes and porosity, and their mechanical and electrical properties were studied. First, the ceramic slurry configuration process was optimized to obtain a ceramic slurry with high solid content (45 vol%) and excellent rheological properties. Then the effect of sintering temperature on microstructure, relative density, mechanical properties, and electrical properties is discussed. The results show that when sintering at 1300 °C, the BaTiO3/Ca10(PO4)6(OH)2 composite ceramic has the highest relative density (99.18 %), the highest compressive strength (44 MPa), large relative dielectric constant (379–389), and low dielectric loss. The polarization electric field strength of the BaTiO3/Ca10(PO4)6(OH)2 composite ceramic was set to 15 kV/cm through the test of the hysteresis loop. Finally, based on multi-physics coupled finite element simulation, the effects of different porosity and different pore sizes on stress distribution and piezoelectric potential were analyzed, and the relationship between them was explored through experiments. The results show that as the porosity increases and the pore size decreases, the mechanical properties of the scaffold decrease significantly, and its compressive strength ranges between 1.67 and 4.26 MPa; as the porosity increases and the pore size increases, the piezoelectric coefficient (d33) of the scaffold showed a decreasing trend, and its d33 ranged between 2 and 9 pC/N. The mechanical and electrical properties of the scaffold meet the performance requirements of cancellous bone. In summary, this work provides a strategy for the application of customized BaTiO3/Ca10(PO4)6(OH)2 composite ceramic scaffolds in new-generation orthopedic implants.
期刊介绍：
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
