Laboratory appraisal of geomechanical and mineralogical factors controlling landslide potential of soil-shales matrix

IF 3.7 2区 工程技术 Q3 ENGINEERING, ENVIRONMENTAL Bulletin of Engineering Geology and the Environment Pub Date : 2024-12-24 DOI:10.1007/s10064-024-04043-8
Jahanzaib Israr, Gang Zhang, Mohsin Waheed Qureshi
{"title":"Laboratory appraisal of geomechanical and mineralogical factors controlling landslide potential of soil-shales matrix","authors":"Jahanzaib Israr,&nbsp;Gang Zhang,&nbsp;Mohsin Waheed Qureshi","doi":"10.1007/s10064-024-04043-8","DOIUrl":null,"url":null,"abstract":"<div><p>This study reports on results from a series of geohydraulic, geomechanical, and mineralogical tests conducted on 12 different landslide samples consisting of broadly graded and potential internally unstable soils. The test samples contained almost 50% coarser or rock (cobbles-gravels) fraction and 50% finer or soil (sand-silt) fraction. The current test results characterized the landslide samples as highly erodible, while their regraded rock and soil fractions showed non-erodibility with good strength and drainage characteristics. For instance, the landslide samples suffer from a classical suffusion failure at critical hydraulic gradients below 0.38 with up to 20% erosion, while their regraded sand-silt fraction remains internally stable even at <span>\\({i}_{cr}\\)</span> up to 0.80 with less than 4% erosion. Subsequently, the results of pinhole erosion testing revealed that the silt component exhibited a high dispersion index D1. Similarly, the coarser fraction showed more than 95% slake durability, while the point load testing both parallel and perpendicular to the planes of weaknesses yielded a shale rating of nearly 8 reflecting high durability against abrasion. Results of both XRD and SEM analyses revealed that the intact landslide samples contained up to 50% Quartz and 42% Calcites with traces of Halite, Bornite, Silicon, and Fluorite minerals. However, the Calcite content of the displaced samples reduced to as low as 11% with subtle variations in other minerals that would result in lower inter-particle cementation and enhanced erodibility, thus making the entire soil matrix a highly erodible material. In essence, the Calcite provides sufficient cementation to the finer fraction that enables the particles to stick together and stay intact inside the constriction network of coarser fraction to ensure stability. However, the loss of Calcite and hence the cementation would trigger the internal erosion of soil fraction to eventually develop a landslide on steeper slopes.</p></div>","PeriodicalId":500,"journal":{"name":"Bulletin of Engineering Geology and the Environment","volume":"84 1","pages":""},"PeriodicalIF":3.7000,"publicationDate":"2024-12-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of Engineering Geology and the Environment","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s10064-024-04043-8","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ENVIRONMENTAL","Score":null,"Total":0}
引用次数: 0

Abstract

This study reports on results from a series of geohydraulic, geomechanical, and mineralogical tests conducted on 12 different landslide samples consisting of broadly graded and potential internally unstable soils. The test samples contained almost 50% coarser or rock (cobbles-gravels) fraction and 50% finer or soil (sand-silt) fraction. The current test results characterized the landslide samples as highly erodible, while their regraded rock and soil fractions showed non-erodibility with good strength and drainage characteristics. For instance, the landslide samples suffer from a classical suffusion failure at critical hydraulic gradients below 0.38 with up to 20% erosion, while their regraded sand-silt fraction remains internally stable even at \({i}_{cr}\) up to 0.80 with less than 4% erosion. Subsequently, the results of pinhole erosion testing revealed that the silt component exhibited a high dispersion index D1. Similarly, the coarser fraction showed more than 95% slake durability, while the point load testing both parallel and perpendicular to the planes of weaknesses yielded a shale rating of nearly 8 reflecting high durability against abrasion. Results of both XRD and SEM analyses revealed that the intact landslide samples contained up to 50% Quartz and 42% Calcites with traces of Halite, Bornite, Silicon, and Fluorite minerals. However, the Calcite content of the displaced samples reduced to as low as 11% with subtle variations in other minerals that would result in lower inter-particle cementation and enhanced erodibility, thus making the entire soil matrix a highly erodible material. In essence, the Calcite provides sufficient cementation to the finer fraction that enables the particles to stick together and stay intact inside the constriction network of coarser fraction to ensure stability. However, the loss of Calcite and hence the cementation would trigger the internal erosion of soil fraction to eventually develop a landslide on steeper slopes.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
求助全文
约1分钟内获得全文 去求助
来源期刊
Bulletin of Engineering Geology and the Environment
Bulletin of Engineering Geology and the Environment 工程技术-地球科学综合
CiteScore
7.10
自引率
11.90%
发文量
445
审稿时长
4.1 months
期刊介绍: Engineering geology is defined in the statutes of the IAEG as the science devoted to the investigation, study and solution of engineering and environmental problems which may arise as the result of the interaction between geology and the works or activities of man, as well as of the prediction of and development of measures for the prevention or remediation of geological hazards. Engineering geology embraces: • the applications/implications of the geomorphology, structural geology, and hydrogeological conditions of geological formations; • the characterisation of the mineralogical, physico-geomechanical, chemical and hydraulic properties of all earth materials involved in construction, resource recovery and environmental change; • the assessment of the mechanical and hydrological behaviour of soil and rock masses; • the prediction of changes to the above properties with time; • the determination of the parameters to be considered in the stability analysis of engineering works and earth masses.
期刊最新文献
Numerical study of breaching at upper parts of homogenous earthen dams Laboratory appraisal of geomechanical and mineralogical factors controlling landslide potential of soil-shales matrix Damage evolution characteristics of freeze–thaw rock combined with CT image and deep learning technology Explicit analysis of the anisotropic characteristics and prediction of the failure behavior of complicated jointed rock masses under triaxial stress Research on the spatiotemporal evolution of deformation and seismic dynamic response characteristics of high-steep loess slope on the northeast edge of the Qinghai-Tibet Plateau
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1