Effect of Sb additions on the creep behaviour of low temperature lead-free Sn–8Zn–3Bi solder alloy

IF 1.7 4区 材料科学 Q3 ENGINEERING, ELECTRICAL & ELECTRONIC Soldering & Surface Mount Technology Pub Date : 2021-05-17 DOI:10.1108/ssmt-05-2020-0023
Guangyuan Ren, M. Collins
{"title":"Effect of Sb additions on the creep behaviour of low temperature lead-free Sn–8Zn–3Bi solder alloy","authors":"Guangyuan Ren, M. Collins","doi":"10.1108/ssmt-05-2020-0023","DOIUrl":null,"url":null,"abstract":"This paper aims to investigate the creep behaviour of the recently developed Sn–8Zn–3Bi–xSb (x = 0, 0.5, 1.0 and 1.5) low temperature lead-free solder alloys.,An in-house compressive test rig was developed to perform creep tests under stresses of 20–40 MPa and temperature range 25°C–75 °C. Dorn power law and Garofalo hyperbolic sine law were used to model the secondary creep rate.,High coefficient of determination R2 of 0.99 is achieved for both the models. It was found that the activation energy of Sn–8Zn–3Bi solder alloy can be significantly increased with addition of Sb, by 60% to 90 kJ/mol approximately, whereas the secondary creep exponent falls in the range 3–7. Improved creep resistance is attributed to solid solution strengthening introduced by micro-alloying. Creep mechanisms that govern the deformation of these newly developed lead-free solder alloys have also been proposed.,The findings are expected to fill the gap of knowledge on creep behaviour of these newly developed solder alloys, which are possible alternatives as lead-free interconnecting material in low temperature electronic assembly.","PeriodicalId":49499,"journal":{"name":"Soldering & Surface Mount Technology","volume":"33 1","pages":"159-169"},"PeriodicalIF":1.7000,"publicationDate":"2021-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1108/ssmt-05-2020-0023","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Soldering & Surface Mount Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1108/ssmt-05-2020-0023","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 2

Abstract

This paper aims to investigate the creep behaviour of the recently developed Sn–8Zn–3Bi–xSb (x = 0, 0.5, 1.0 and 1.5) low temperature lead-free solder alloys.,An in-house compressive test rig was developed to perform creep tests under stresses of 20–40 MPa and temperature range 25°C–75 °C. Dorn power law and Garofalo hyperbolic sine law were used to model the secondary creep rate.,High coefficient of determination R2 of 0.99 is achieved for both the models. It was found that the activation energy of Sn–8Zn–3Bi solder alloy can be significantly increased with addition of Sb, by 60% to 90 kJ/mol approximately, whereas the secondary creep exponent falls in the range 3–7. Improved creep resistance is attributed to solid solution strengthening introduced by micro-alloying. Creep mechanisms that govern the deformation of these newly developed lead-free solder alloys have also been proposed.,The findings are expected to fill the gap of knowledge on creep behaviour of these newly developed solder alloys, which are possible alternatives as lead-free interconnecting material in low temperature electronic assembly.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Sb添加对低温无铅Sn–8Zn–3Bi焊料合金蠕变行为的影响
本文旨在研究最近开发的Sn–8Zn–3Bi–xSb(x=0、0.5、1.0和1.5)低温无铅焊料合金的蠕变行为。,开发了一个内部压缩试验台,用于在20–40的应力下进行蠕变试验 MPa,温度范围25°C–75 °C。采用Dorn幂律和Garofaro双曲正弦律对二次蠕变率进行了建模。,两个模型的测定系数R2均达到0.99。研究发现,添加Sb可以显著提高Sn–8Zn–3Bi焊料合金的活化能,提高60%至90% kJ/mol,而二次蠕变指数在3-7范围内。抗蠕变性能的提高归因于微合金化引入的固溶强化。还提出了控制这些新开发的无铅焊料合金的变形的蠕变机制。,这些发现有望填补这些新开发的焊料合金蠕变行为的知识空白,这些合金是低温电子组件中无铅互连材料的可能替代品。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Soldering & Surface Mount Technology
Soldering & Surface Mount Technology 工程技术-材料科学:综合
CiteScore
4.10
自引率
15.00%
发文量
30
审稿时长
>12 weeks
期刊介绍: Soldering & Surface Mount Technology seeks to make an important contribution to the advancement of research and application within the technical body of knowledge and expertise in this vital area. Soldering & Surface Mount Technology compliments its sister publications; Circuit World and Microelectronics International. The journal covers all aspects of SMT from alloys, pastes and fluxes, to reliability and environmental effects, and is currently providing an important dissemination route for new knowledge on lead-free solders and processes. The journal comprises a multidisciplinary study of the key materials and technologies used to assemble state of the art functional electronic devices. The key focus is on assembling devices and interconnecting components via soldering, whilst also embracing a broad range of related approaches.
期刊最新文献
Formation and growth mechanism of thin Cu6Sn5 films in Sn/Cu and Sn-0.1AlN/Cu structures using laser heating Influence of annealing temperature on 3D surface stereometric analysis in C-Ni films Effect of different beam distances in laser soldering process: a numerical and experimental study Interfacial IMC growth behavior of Sn-3Ag-3Sb-xIn solder on Cu substrate Effects of Ni addition on wettability and interfacial microstructure of Sn-0.7Cu-xNi solder alloy
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1