Quasi-dynamic approximation of unsteady pressure distribution for transonic airfoils in flutter

Abstract

A lack of reliable experimental data on transonic blade flutter in real turbomachines hampers further improvement of computational design predictions for off-design operation regimes of newly built machines. Acquiring unsteady pressure distributions on blades in real turbomachines is practically impossible. The goal of this work is to explore if an approximate unsteady pressure distributions can be created experimentally in a simple aerodynamic tunnel by composing a sequence of blade surface steady pressures acquired for gradually varying blade incidence angle offsets. An essential condition for such an approximation is that the dynamic pressure component induced by the blade motion is substantially smaller than the flow pattern changes caused by the varying interblade channel geometry. A dedicated test facility, called the Blade Flutter Module (BFM), has been built and used for this purpose. The BFM is a linear cascade consisting of five transonic airfoils that can be operated either in a static or a dynamic regime. For the dynamic operation, any of the blades can be oscillated at frequencies of up to 400 Hz with the maximum angular amplitude of three degrees. The obtained results confirm that within the range of the test conditions, the proposed compounded quasi-dynamic approach exhibits similar characteristics to dynamically acquired unsteady blade pressures. This is true for a test range of a maximum inlet Mach number of 1.09, maximum blade oscillating frequency of 100 Hz, and measurement of unsteady pressure distributions on a blade suction surface. The corresponding blade reduced frequency is 0.21.