Life Cycle Assessment of Immobilised and Slurry Photocatalytic Systems for Removal of Natural Organic Matter in Water

This study investigates the environmental impacts caused by the scaling up of the photocatalytic purification of drinking water using ultraviolet light-emitting diode technology. The life cycle assessment methodology was utilised to estimate the environmental impacts of two different reactor setups commonly used in lab-scale studies: an immobilised and a suspended TiO2 catalytic system. The functional unit adopted was the treatment of 1 L of water with an initial 7.8 mg/L concentration of natural organic matter, achieving a final 1 mg/L concentration. The use of a suspended photocatalyst was found to have an environmental footprint that was 87% lower than that of the immobilised one. From the sensitivity analysis, the environmental hotspots of the treatment process were the electricity usage and immobilised catalyst production. Therefore, alternative scenarios investigating the use of a renewable electricity mix and recyclable materials were explored to enhance the environmental performance of the photocatalytic treatment process. Using a renewable electricity mix, a decrease of 55% and 15% for the suspended and immobilised catalyst, respectively, was observed. Additionally, the process of recycling the glass used to support the immobilised catalyst achieved a maximum reduction of 22% in the environmental impact from the original scenario, with 100 glass reuses appearing to provide diminishing returns on the environmental impact savings.