Bhaskar Paul, Shubham Kumar, J. Kishor, Sanjib Majumdar
{"title":"微观结构对电弧固结钼-钛-硅（B）合金的氧化和微观力学行为的影响","authors":"Bhaskar Paul, Shubham Kumar, J. Kishor, Sanjib Majumdar","doi":"10.1007/s11665-024-09792-x","DOIUrl":null,"url":null,"abstract":"<div><p>The present study deals with the development and characterization of Mo-35Ti-10Si and Mo-35Ti-10Si-2B (wt.%) alloy for ultra-high temperature applications beyond the temperature limit of existing super alloys. The microstructural characterization using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), electron back scattered diffraction (EBSD), x-ray diffraction (XRD) revealed that the Mo-35Ti-10Si-2B alloy was consisted of three phases, namely, (Mo, Ti)<sub>ss</sub>, (Mo, Ti)<sub>5</sub>SiB<sub>2</sub> and (Ti, Mo)<sub>5</sub>Si<sub>3</sub>; whereas, Mo-35Ti-10Si alloy was found to be consisting of (Mo, Ti)ss, and (Mo,Ti)<sub>3</sub>Si phases. Since quantification of boron is difficult by EDS, Particle Induced Gamma-ray Emission (PIGE), a nuclear reaction analysis technique was used for chemical composition analysis of boron. The oxidation behavior of the Mo-35Ti-10Si-2B alloy in the temperature regime of 825-1250 °C was studied in detail and compared with boron-free Mo-35Ti-10Si alloy. Mo-35Ti-10Si-2B alloy exhibited superior oxidation behavior at intermediate temperatures of 825 °C, and excellent oxidation resistance at higher temperatures between 1000 and 1250 °C due to the formation of the protective borosilica and double oxide layers (TiO<sub>2</sub> and duplex borosilica-TiO<sub>2</sub>), respectively. High-temperature oxidation mechanisms were discussed using detailed microstructural cross section analysis of the oxidized alloy samples. The micro-mechanical behavior of constitutive phases of the Mo-35Ti-10Si-2B alloy were studied by microhardness, nano-indentation and micropillar compression testing. The micropillar compression of (Mo, Ti)<sub>ss</sub> phase showed fairly ductile behavior with the evidence of activation of dislocation in the form of slip lines revealed through the post-deformation fractography. Deformation studies of (Mo, Ti)<sub>5</sub>SiB<sub>2</sub> and (Ti, Mo)<sub>5</sub>Si<sub>3</sub> phases were also carried out which showed large strain bursts indicating possibility of activation of dislocation activities even at room temperatures imparting low level of ductility.</p></div>","PeriodicalId":644,"journal":{"name":"Journal of Materials Engineering and Performance","volume":"33 21","pages":"11695 - 11707"},"PeriodicalIF":2.2000,"publicationDate":"2024-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11665-024-09792-x.pdf","citationCount":"0","resultStr":"{\"title\":\"Effect of Microstructure on Oxidation and Micro-mechanical Behavior of Arc Consolidated Mo-Ti-Si-(B) Alloys\",\"authors\":\"Bhaskar Paul, Shubham Kumar, J. Kishor, Sanjib Majumdar\",\"doi\":\"10.1007/s11665-024-09792-x\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The present study deals with the development and characterization of Mo-35Ti-10Si and Mo-35Ti-10Si-2B (wt.%) alloy for ultra-high temperature applications beyond the temperature limit of existing super alloys. The microstructural characterization using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), electron back scattered diffraction (EBSD), x-ray diffraction (XRD) revealed that the Mo-35Ti-10Si-2B alloy was consisted of three phases, namely, (Mo, Ti)<sub>ss</sub>, (Mo, Ti)<sub>5</sub>SiB<sub>2</sub> and (Ti, Mo)<sub>5</sub>Si<sub>3</sub>; whereas, Mo-35Ti-10Si alloy was found to be consisting of (Mo, Ti)ss, and (Mo,Ti)<sub>3</sub>Si phases. Since quantification of boron is difficult by EDS, Particle Induced Gamma-ray Emission (PIGE), a nuclear reaction analysis technique was used for chemical composition analysis of boron. The oxidation behavior of the Mo-35Ti-10Si-2B alloy in the temperature regime of 825-1250 °C was studied in detail and compared with boron-free Mo-35Ti-10Si alloy. Mo-35Ti-10Si-2B alloy exhibited superior oxidation behavior at intermediate temperatures of 825 °C, and excellent oxidation resistance at higher temperatures between 1000 and 1250 °C due to the formation of the protective borosilica and double oxide layers (TiO<sub>2</sub> and duplex borosilica-TiO<sub>2</sub>), respectively. High-temperature oxidation mechanisms were discussed using detailed microstructural cross section analysis of the oxidized alloy samples. The micro-mechanical behavior of constitutive phases of the Mo-35Ti-10Si-2B alloy were studied by microhardness, nano-indentation and micropillar compression testing. The micropillar compression of (Mo, Ti)<sub>ss</sub> phase showed fairly ductile behavior with the evidence of activation of dislocation in the form of slip lines revealed through the post-deformation fractography. Deformation studies of (Mo, Ti)<sub>5</sub>SiB<sub>2</sub> and (Ti, Mo)<sub>5</sub>Si<sub>3</sub> phases were also carried out which showed large strain bursts indicating possibility of activation of dislocation activities even at room temperatures imparting low level of ductility.</p></div>\",\"PeriodicalId\":644,\"journal\":{\"name\":\"Journal of Materials Engineering and Performance\",\"volume\":\"33 21\",\"pages\":\"11695 - 11707\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-07-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s11665-024-09792-x.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Materials Engineering and Performance\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11665-024-09792-x\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Engineering and Performance","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11665-024-09792-x","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Effect of Microstructure on Oxidation and Micro-mechanical Behavior of Arc Consolidated Mo-Ti-Si-(B) Alloys
The present study deals with the development and characterization of Mo-35Ti-10Si and Mo-35Ti-10Si-2B (wt.%) alloy for ultra-high temperature applications beyond the temperature limit of existing super alloys. The microstructural characterization using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), electron back scattered diffraction (EBSD), x-ray diffraction (XRD) revealed that the Mo-35Ti-10Si-2B alloy was consisted of three phases, namely, (Mo, Ti)ss, (Mo, Ti)5SiB2 and (Ti, Mo)5Si3; whereas, Mo-35Ti-10Si alloy was found to be consisting of (Mo, Ti)ss, and (Mo,Ti)3Si phases. Since quantification of boron is difficult by EDS, Particle Induced Gamma-ray Emission (PIGE), a nuclear reaction analysis technique was used for chemical composition analysis of boron. The oxidation behavior of the Mo-35Ti-10Si-2B alloy in the temperature regime of 825-1250 °C was studied in detail and compared with boron-free Mo-35Ti-10Si alloy. Mo-35Ti-10Si-2B alloy exhibited superior oxidation behavior at intermediate temperatures of 825 °C, and excellent oxidation resistance at higher temperatures between 1000 and 1250 °C due to the formation of the protective borosilica and double oxide layers (TiO2 and duplex borosilica-TiO2), respectively. High-temperature oxidation mechanisms were discussed using detailed microstructural cross section analysis of the oxidized alloy samples. The micro-mechanical behavior of constitutive phases of the Mo-35Ti-10Si-2B alloy were studied by microhardness, nano-indentation and micropillar compression testing. The micropillar compression of (Mo, Ti)ss phase showed fairly ductile behavior with the evidence of activation of dislocation in the form of slip lines revealed through the post-deformation fractography. Deformation studies of (Mo, Ti)5SiB2 and (Ti, Mo)5Si3 phases were also carried out which showed large strain bursts indicating possibility of activation of dislocation activities even at room temperatures imparting low level of ductility.
期刊介绍：
ASM International''s Journal of Materials Engineering and Performance focuses on solving day-to-day engineering challenges, particularly those involving components for larger systems. The journal presents a clear understanding of relationships between materials selection, processing, applications and performance.
The Journal of Materials Engineering covers all aspects of materials selection, design, processing, characterization and evaluation, including how to improve materials properties through processes and process control of casting, forming, heat treating, surface modification and coating, and fabrication.
Testing and characterization (including mechanical and physical tests, NDE, metallography, failure analysis, corrosion resistance, chemical analysis, surface characterization, and microanalysis of surfaces, features and fractures), and industrial performance measurement are also covered
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
