钴和/或铁离子作为掺杂剂加入中温 SOFC 的 Ba(Zr, Y)O3-δ 基包晶石阴极的比较效应

IF 5.1 2区 材料科学 Q1 MATERIALS SCIENCE, CERAMICS Ceramics International Pub Date : 2024-09-25 DOI:10.1016/j.ceramint.2024.09.260
Baofeng Tu, Aokai Sun, Xiaojing Wang, Huiying Qi, Tonghuan Zhang, Peng Qiu, Di Liu
{"title":"钴和/或铁离子作为掺杂剂加入中温 SOFC 的 Ba(Zr, Y)O3-δ 基包晶石阴极的比较效应","authors":"Baofeng Tu,&nbsp;Aokai Sun,&nbsp;Xiaojing Wang,&nbsp;Huiying Qi,&nbsp;Tonghuan Zhang,&nbsp;Peng Qiu,&nbsp;Di Liu","doi":"10.1016/j.ceramint.2024.09.260","DOIUrl":null,"url":null,"abstract":"<div><div>The development of highly active cathode is crucial to promote the electrochemical performance of intermediate-temperature solid oxide fuel cells (IT-SOFCs). Here, it is reported the cobalt and/or iron ions as dopants into Ba(Zr, Y)O<sub>3-δ</sub> with the nominal chemical formulae of BaCo<sub>0.4</sub>Fe<sub>0.4</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BCFZY), BaCo<sub>0.8</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BCZY), and BaFe<sub>0.8</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BFZY), which all form the main cubic perovskites in addition to a small amount of co-assembled hexagonal D-Ba(Co, Fe)O<sub>3-δ</sub>, D-BaCoO<sub>3-δ</sub>, and D-BaFeO<sub>3-δ</sub> under the same preparing condition. Among three samples, BCZY composite shows the highest capacity of O<sub>2</sub> adsorption, lower thermal expansion coefficient (19.1 × 10<sup>−6</sup> K<sup>−1</sup>), and highest electrical conductivity of 2.73 S cm<sup>−1</sup> (750 °C). The symmetric cell with BCZY composite cathode exhibits excellent ORR activity with the lowest area specific resistance of 0.10 Ω cm<sup>2</sup> at 700 °C, which is 0.71 and 0.67 times those of BCFZY composite and BFZY composite cathodes. Accordingly, the single cell with BCZY composite cathode shows the lowest R<sub>P</sub> of 0.16 Ω cm<sup>2</sup> and the highest peak power density of 2.24 W cm<sup>2</sup> at 700 °C. The distribution of relaxation times (DRT) analysis reveals that BCZY composite cathode shows the superior surficial oxygen exchange and charge transfer activity.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 23","pages":"Pages 49185-49193"},"PeriodicalIF":5.1000,"publicationDate":"2024-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The comparative effects of cobalt and/or iron ions as dopants into Ba(Zr, Y)O3-δ-based perovskite cathodes for intermediate-temperature SOFCs\",\"authors\":\"Baofeng Tu,&nbsp;Aokai Sun,&nbsp;Xiaojing Wang,&nbsp;Huiying Qi,&nbsp;Tonghuan Zhang,&nbsp;Peng Qiu,&nbsp;Di Liu\",\"doi\":\"10.1016/j.ceramint.2024.09.260\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>The development of highly active cathode is crucial to promote the electrochemical performance of intermediate-temperature solid oxide fuel cells (IT-SOFCs). Here, it is reported the cobalt and/or iron ions as dopants into Ba(Zr, Y)O<sub>3-δ</sub> with the nominal chemical formulae of BaCo<sub>0.4</sub>Fe<sub>0.4</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BCFZY), BaCo<sub>0.8</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BCZY), and BaFe<sub>0.8</sub>Zr<sub>0.1</sub>Y<sub>0.1</sub>O<sub>3-δ</sub> (BFZY), which all form the main cubic perovskites in addition to a small amount of co-assembled hexagonal D-Ba(Co, Fe)O<sub>3-δ</sub>, D-BaCoO<sub>3-δ</sub>, and D-BaFeO<sub>3-δ</sub> under the same preparing condition. Among three samples, BCZY composite shows the highest capacity of O<sub>2</sub> adsorption, lower thermal expansion coefficient (19.1 × 10<sup>−6</sup> K<sup>−1</sup>), and highest electrical conductivity of 2.73 S cm<sup>−1</sup> (750 °C). The symmetric cell with BCZY composite cathode exhibits excellent ORR activity with the lowest area specific resistance of 0.10 Ω cm<sup>2</sup> at 700 °C, which is 0.71 and 0.67 times those of BCFZY composite and BFZY composite cathodes. Accordingly, the single cell with BCZY composite cathode shows the lowest R<sub>P</sub> of 0.16 Ω cm<sup>2</sup> and the highest peak power density of 2.24 W cm<sup>2</sup> at 700 °C. The distribution of relaxation times (DRT) analysis reveals that BCZY composite cathode shows the superior surficial oxygen exchange and charge transfer activity.</div></div>\",\"PeriodicalId\":267,\"journal\":{\"name\":\"Ceramics International\",\"volume\":\"50 23\",\"pages\":\"Pages 49185-49193\"},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-09-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ceramics International\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0272884224042688\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224042688","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

摘要

开发高活性阴极对于提高中温固体氧化物燃料电池(IT-SOFC)的电化学性能至关重要。在此,报告了钴和/或铁离子作为掺杂剂加入 Ba(Zr,Y)O3-δ 的情况,其化学式分别为 BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY)、BaCo0.8Zr0.1Y0.1O3-δ (BCZY) 和 BaFe0.8Zr0.1Y0.1O3-δ(BFZY),在相同的制备条件下,它们除了形成主要的立方包晶外,还形成了少量共组装六方的 D-Ba(Co,Fe)O3-δ、D-BaCoO3-δ 和 D-BaFeO3-δ。在这三种样品中,BCZY 复合材料吸附 O2 的能力最强,热膨胀系数较低(19.1 × 10-6 K-1),电导率最高,为 2.73 S cm-1(750 °C)。采用 BCZY 复合阴极的对称电池具有优异的 ORR 活性,在 700 ℃ 时的面积比电阻最低,为 0.10 Ω cm2,分别是 BCFZY 复合阴极和 BFZY 复合阴极的 0.71 倍和 0.67 倍。因此,采用 BCZY 复合阴极的单电池在 700 ℃ 时的 RP 最低,为 0.16 Ω cm2,峰值功率密度最高,为 2.24 W cm2。弛豫时间分布(DRT)分析表明,BCZY 复合阴极显示出卓越的表面氧交换和电荷转移活性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
The comparative effects of cobalt and/or iron ions as dopants into Ba(Zr, Y)O3-δ-based perovskite cathodes for intermediate-temperature SOFCs
The development of highly active cathode is crucial to promote the electrochemical performance of intermediate-temperature solid oxide fuel cells (IT-SOFCs). Here, it is reported the cobalt and/or iron ions as dopants into Ba(Zr, Y)O3-δ with the nominal chemical formulae of BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY), BaCo0.8Zr0.1Y0.1O3-δ (BCZY), and BaFe0.8Zr0.1Y0.1O3-δ (BFZY), which all form the main cubic perovskites in addition to a small amount of co-assembled hexagonal D-Ba(Co, Fe)O3-δ, D-BaCoO3-δ, and D-BaFeO3-δ under the same preparing condition. Among three samples, BCZY composite shows the highest capacity of O2 adsorption, lower thermal expansion coefficient (19.1 × 10−6 K−1), and highest electrical conductivity of 2.73 S cm−1 (750 °C). The symmetric cell with BCZY composite cathode exhibits excellent ORR activity with the lowest area specific resistance of 0.10 Ω cm2 at 700 °C, which is 0.71 and 0.67 times those of BCFZY composite and BFZY composite cathodes. Accordingly, the single cell with BCZY composite cathode shows the lowest RP of 0.16 Ω cm2 and the highest peak power density of 2.24 W cm2 at 700 °C. The distribution of relaxation times (DRT) analysis reveals that BCZY composite cathode shows the superior surficial oxygen exchange and charge transfer activity.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Ceramics International
Ceramics International 工程技术-材料科学:硅酸盐
CiteScore
9.40
自引率
15.40%
发文量
4558
审稿时长
25 days
期刊介绍: Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties. Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour. Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.
期刊最新文献
Polyetherimide copolymer film with room-temperature self-healing properties and high breakdown field strength Effect of epoxy resin addition on the acoustic impedance, microstructure, dielectric and piezoelectric properties of 1–3 connectivity lead-free barium zirconate titanate ceramic cement-based composites High-efficiency 1.6 μm-band fiber laser based on single Er3+-doped tungsten tellurite glass with high mechanical strength through tailored glass network Improvement of energy storage properties of BNT-based ceramics via compositional modification Effects of mechanical alloying methods on structural phase stability, chemical state, optical, electrical and ferroelectric properties in Sc-doped α-Fe2O3 system
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1