INFLUENCE OF MICROENCAPSULATION PARAMETERS ON THE SIZE AND MORPHOLOGY OF MICROCAPSULES BY ECO-FRIENDLY SOLVENT EVAPORATION METHOD ORIENTED TO MEDICAL TEXTILES

Application of microcapsules in medical textile has been studied and commercially developed widely in recent years. The aim of this work was to propose an eco-friendly microencapsulation by solvent evaporation method that can contribute to the manufacture of medical textile products using microcapsules. Quillaja saponin was used as bio-sourced surfactant and ethyl acetate was used as the less toxic, non-halogenated organic solvent. The influences of saponin concentration, stirring speed during emulsification step and the volume of ethyl acetate used to saturate the aqueous phase before emulsification on the microcapsule size and morphology were investigated. The results showed that eudragit microcapsules of ibuprofen with diameter in range from 17 to 34 µm, which were suitable for medical textile applications, were successfully elaborated. The saponin concentration varied from 0.025 to 0.1 wt%. The stirring speed was changed from 700 to 600 rpm. The volume of ethyl acetate used in saturation step was 0, 8 and 12 ml. In the scope of investigation, the saponin concentration and the volume of ethyl acetate used in saturation step did affect the microcapsule size and morphology while the stirring speed did not. The saturation step really helped to reduce the formation of irregular microparticles and to narrow the size distribution, but the microcapsules became more porous, weaker and were deformed significantly by drying in the fabric treatment process.