马赫-曾德尔电光调制器特性研究

Zhixiong Li, Fengman Liu, Yu Sun, Huimin He, H. Xue, Juan Wei
{"title":"马赫-曾德尔电光调制器特性研究","authors":"Zhixiong Li, Fengman Liu, Yu Sun, Huimin He, H. Xue, Juan Wei","doi":"10.1109/ICEPT47577.2019.245157","DOIUrl":null,"url":null,"abstract":"This paper propose electric-optical modulator model and establish a simulation link. Combined with the simulation link at 25 Gbps transmission rate, the extinction ratio(ER), optical modulation amplitude(OMA) and bit error rate(BER) of the modulator are studied when the arm length of the modulator is between 1mm and 3mm, and the peak-to-peak voltage (VPP) of the input electrical signal is 2-3v, and the input optical power varies from 5 to10mw. The result are as follow : In order to obtain a larger extinction ratio, it tends to increase the length of both arms of the modulator or the VPP of the input electrical signal when other condition are the same, but the ER is insensitive to changes in input optical intensity; When the length of the modulation arm is changed from 1 to 3mm, the OMA increases first and then decreases, and the BER changes inversely. Therefore, the maximum OMA and the lowest BER can be obtained by optimizing the arm length of the modulator; the BER of the modulator decreases as the input optical intensity and the VPP increases.","PeriodicalId":6676,"journal":{"name":"2019 20th International Conference on Electronic Packaging Technology(ICEPT)","volume":"19 1","pages":"1-4"},"PeriodicalIF":0.0000,"publicationDate":"2019-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study on Characteristics of Mach-Zehnder Electro-Optical Modulator\",\"authors\":\"Zhixiong Li, Fengman Liu, Yu Sun, Huimin He, H. Xue, Juan Wei\",\"doi\":\"10.1109/ICEPT47577.2019.245157\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper propose electric-optical modulator model and establish a simulation link. Combined with the simulation link at 25 Gbps transmission rate, the extinction ratio(ER), optical modulation amplitude(OMA) and bit error rate(BER) of the modulator are studied when the arm length of the modulator is between 1mm and 3mm, and the peak-to-peak voltage (VPP) of the input electrical signal is 2-3v, and the input optical power varies from 5 to10mw. The result are as follow : In order to obtain a larger extinction ratio, it tends to increase the length of both arms of the modulator or the VPP of the input electrical signal when other condition are the same, but the ER is insensitive to changes in input optical intensity; When the length of the modulation arm is changed from 1 to 3mm, the OMA increases first and then decreases, and the BER changes inversely. Therefore, the maximum OMA and the lowest BER can be obtained by optimizing the arm length of the modulator; the BER of the modulator decreases as the input optical intensity and the VPP increases.\",\"PeriodicalId\":6676,\"journal\":{\"name\":\"2019 20th International Conference on Electronic Packaging Technology(ICEPT)\",\"volume\":\"19 1\",\"pages\":\"1-4\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2019 20th International Conference on Electronic Packaging Technology(ICEPT)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICEPT47577.2019.245157\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2019 20th International Conference on Electronic Packaging Technology(ICEPT)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICEPT47577.2019.245157","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

本文提出了电光调制器模型,并建立了仿真环节。结合25 Gbps传输速率下的仿真链路,研究了调制器臂长在1mm ~ 3mm之间,输入电信号的峰峰电压(VPP)为2 ~ 3v,输入光功率为5 ~ 10mw时调制器的消光比(ER)、光调制幅度(OMA)和误码率(BER)。结果表明:在其他条件相同的情况下,为了获得更大的消光比,往往会增加调制器双臂的长度或输入电信号的VPP,但ER对输入光强的变化不敏感;当调制臂长度从1 ~ 3mm变化时,OMA先增大后减小,误码率呈反比变化。因此,通过优化调制器臂长可以获得最大的OMA和最低的BER;调制器的误码率随输入光强和VPP的增加而减小。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Study on Characteristics of Mach-Zehnder Electro-Optical Modulator
This paper propose electric-optical modulator model and establish a simulation link. Combined with the simulation link at 25 Gbps transmission rate, the extinction ratio(ER), optical modulation amplitude(OMA) and bit error rate(BER) of the modulator are studied when the arm length of the modulator is between 1mm and 3mm, and the peak-to-peak voltage (VPP) of the input electrical signal is 2-3v, and the input optical power varies from 5 to10mw. The result are as follow : In order to obtain a larger extinction ratio, it tends to increase the length of both arms of the modulator or the VPP of the input electrical signal when other condition are the same, but the ER is insensitive to changes in input optical intensity; When the length of the modulation arm is changed from 1 to 3mm, the OMA increases first and then decreases, and the BER changes inversely. Therefore, the maximum OMA and the lowest BER can be obtained by optimizing the arm length of the modulator; the BER of the modulator decreases as the input optical intensity and the VPP increases.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Laser-assisted Glass Frit Bonding Combined With Blue Light-shielding Dynamic resistance monitoring of aging process of pressureless sintered nano-silver joints Warpage simulation method development considering moiré inhomogeneous temperature field Size effects on segregated growth kinetics of interfacial IMC between Sn solder and Cu substrate Ultrasound-assisted soldering process performance of Sn-Ag-Ti(Ce, Ga) active solders on thin film ZnO substrate
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1