A new radial basis function active learning method based on distance constraint for structural reliability analysis

IF 2.7 3区 材料科学 Q2 ENGINEERING, MECHANICAL International Journal of Mechanics and Materials in Design Pub Date : 2023-03-09 DOI:10.1007/s10999-023-09644-x
Yuming Zhang, Juan Ma, Wenyi Du
{"title":"A new radial basis function active learning method based on distance constraint for structural reliability analysis","authors":"Yuming Zhang,&nbsp;Juan Ma,&nbsp;Wenyi Du","doi":"10.1007/s10999-023-09644-x","DOIUrl":null,"url":null,"abstract":"<div><p>Strongly nonlinear structural systems exhibit high computational errors when dependability is calculated using conventional approaches such as the primary second-order method of moments and the secondary second-order method of moments. The combination of the proxy model and Monte Carlo simulation is an effective method to solve the structural failure probability problem. However, existing studies on the active learning methods of proxy models for reliability calculation mainly focus on the kriging model, while for radial basis interpolation, the existing research results are relatively few. Based on the above analysis, this paper proposes to combine the cross-validation method with multiple kernel functions to evaluate the uncertainty at the prediction points. The mathematical expression of the active learning function considering three factors is proposed: the linear combination of the distance from the surface of limit state and the uncertainty of the predicted value of the proxy model as the optimization objective function, and the distance between the sample to be selected and the initial sample point as the constraint condition. Meanwhile, using the idea of the penalty function, the constrained problem is transformed into the unconstrained problem to get the final active learning function PLF. Finally, the efficiency, accuracy, and robustness of the PRBFM method are verified by classical cases and compared with other methods. It provides a new method and a new idea for the reliability analysis of complex structures.</p></div>","PeriodicalId":593,"journal":{"name":"International Journal of Mechanics and Materials in Design","volume":"19 3","pages":"567 - 581"},"PeriodicalIF":2.7000,"publicationDate":"2023-03-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanics and Materials in Design","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s10999-023-09644-x","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 1

Abstract

Strongly nonlinear structural systems exhibit high computational errors when dependability is calculated using conventional approaches such as the primary second-order method of moments and the secondary second-order method of moments. The combination of the proxy model and Monte Carlo simulation is an effective method to solve the structural failure probability problem. However, existing studies on the active learning methods of proxy models for reliability calculation mainly focus on the kriging model, while for radial basis interpolation, the existing research results are relatively few. Based on the above analysis, this paper proposes to combine the cross-validation method with multiple kernel functions to evaluate the uncertainty at the prediction points. The mathematical expression of the active learning function considering three factors is proposed: the linear combination of the distance from the surface of limit state and the uncertainty of the predicted value of the proxy model as the optimization objective function, and the distance between the sample to be selected and the initial sample point as the constraint condition. Meanwhile, using the idea of the penalty function, the constrained problem is transformed into the unconstrained problem to get the final active learning function PLF. Finally, the efficiency, accuracy, and robustness of the PRBFM method are verified by classical cases and compared with other methods. It provides a new method and a new idea for the reliability analysis of complex structures.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于距离约束的径向基函数主动学习方法在结构可靠性分析中的应用
强非线性结构系统的可靠性计算采用传统的二阶矩法和二阶矩法计算时存在较大的计算误差。代理模型与蒙特卡罗模拟相结合是求解结构失效概率问题的有效方法。然而,现有的可靠性计算代理模型主动学习方法的研究主要集中在kriging模型上,而对于径向基插值的研究成果相对较少。基于以上分析,本文提出将交叉验证法与多核函数相结合,对预测点的不确定性进行评估。提出了考虑三个因素的主动学习函数的数学表达式:以到极限状态表面的距离与代理模型预测值的不确定性的线性组合作为优化目标函数,以待选样本与初始样本点之间的距离作为约束条件。同时,利用罚函数的思想,将约束问题转化为无约束问题,得到最终的主动学习函数PLF。最后,通过经典实例验证了PRBFM方法的有效性、准确性和鲁棒性,并与其他方法进行了比较。为复杂结构的可靠性分析提供了一种新方法和新思路。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Journal of Mechanics and Materials in Design
International Journal of Mechanics and Materials in Design ENGINEERING, MECHANICAL-MATERIALS SCIENCE, MULTIDISCIPLINARY
CiteScore
6.00
自引率
5.40%
发文量
41
审稿时长
>12 weeks
期刊介绍: It is the objective of this journal to provide an effective medium for the dissemination of recent advances and original works in mechanics and materials'' engineering and their impact on the design process in an integrated, highly focused and coherent format. The goal is to enable mechanical, aeronautical, civil, automotive, biomedical, chemical and nuclear engineers, researchers and scientists to keep abreast of recent developments and exchange ideas on a number of topics relating to the use of mechanics and materials in design. Analytical synopsis of contents: The following non-exhaustive list is considered to be within the scope of the International Journal of Mechanics and Materials in Design: Intelligent Design: Nano-engineering and Nano-science in Design; Smart Materials and Adaptive Structures in Design; Mechanism(s) Design; Design against Failure; Design for Manufacturing; Design of Ultralight Structures; Design for a Clean Environment; Impact and Crashworthiness; Microelectronic Packaging Systems. Advanced Materials in Design: Newly Engineered Materials; Smart Materials and Adaptive Structures; Micromechanical Modelling of Composites; Damage Characterisation of Advanced/Traditional Materials; Alternative Use of Traditional Materials in Design; Functionally Graded Materials; Failure Analysis: Fatigue and Fracture; Multiscale Modelling Concepts and Methodology; Interfaces, interfacial properties and characterisation. Design Analysis and Optimisation: Shape and Topology Optimisation; Structural Optimisation; Optimisation Algorithms in Design; Nonlinear Mechanics in Design; Novel Numerical Tools in Design; Geometric Modelling and CAD Tools in Design; FEM, BEM and Hybrid Methods; Integrated Computer Aided Design; Computational Failure Analysis; Coupled Thermo-Electro-Mechanical Designs.
期刊最新文献
Strength and stability analysis of composite inverted conical structure Multi-objective topology optimization for materials with negative Poisson’s ratio and thermal insulation An efficient approximation algorithm for variance global sensitivity by Bayesian updating Theoretical prediction and experimental verification of thermomechanical deflection responses of geometrically nonlinear porous graded curved structure Voxel-based evolutionary topological optimization of connected structures for natural frequency optimization
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1