The advent of digital image and volume correlation has attracted wide use in fracture mechanics. The full‐field nature of digital image and volume correlation allows for the integration of computational fracture mechanics to analyse cracked samples quantitatively. This review provides a comprehensive overview of current methods used to extract fracture properties from full‐field displacement data. The term full‐field fracture mechanics is introduced to highlight the uniqueness of using inherently noisy experiential data to extract fracture properties. The review focuses on post‐processing‐based approaches rather than integrated approaches, as these have less limitations and are more commonly employed. There are four approaches that are discussed in extracting fracture properties from experimentally computed displacement data: field‐fitting, integral, crack‐opening and cohesive zone modelling approaches. This is further developed to discuss problems associated with using digital image and volume correlation to extract properties, including application examples.
{"title":"Extracting fracture properties from digital image and volume correlation displacement data: A review","authors":"T. H. Becker","doi":"10.1111/str.12469","DOIUrl":"https://doi.org/10.1111/str.12469","url":null,"abstract":"The advent of digital image and volume correlation has attracted wide use in fracture mechanics. The full‐field nature of digital image and volume correlation allows for the integration of computational fracture mechanics to analyse cracked samples quantitatively. This review provides a comprehensive overview of current methods used to extract fracture properties from full‐field displacement data. The term full‐field fracture mechanics is introduced to highlight the uniqueness of using inherently noisy experiential data to extract fracture properties. The review focuses on post‐processing‐based approaches rather than integrated approaches, as these have less limitations and are more commonly employed. There are four approaches that are discussed in extracting fracture properties from experimentally computed displacement data: field‐fitting, integral, crack‐opening and cohesive zone modelling approaches. This is further developed to discuss problems associated with using digital image and volume correlation to extract properties, including application examples.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"26 1","pages":""},"PeriodicalIF":2.1,"publicationDate":"2023-11-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139231477","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pankaj R. Jaiswal, Rahul Iyer Kumar, Franz Bormann, Thibault Juwet, Geert Luyckx, Luc Mouton, Cedric Verhaeghe, Wim De Waele
Abstract This work reports a study of the fatigue behaviour and quasi‐static strength of full‐scale adhesively bonded steel‐composite joints. Three joints with an approximately 10‐mm‐thick layer of methyl methacrylate adhesive were manufactured in dockyard conditions. One specimen was tensile tested till failure, while two specimens were subjected to ~3.5 million fatigue cycles, followed by a residual tensile test supported with digital image correlation. The shear, longitudinal and peel strain values within the adhesive bondlines are significantly higher at the gripped sides due to the asymmetrical design of the steel brackets. All specimens showed a significantly higher shear strength than the design values defined by the shipbuilder. Fibre Bragg sensors monitored strains at steel and composite constituents and allowed to detect damage onset and evolution in tensile tested specimens. A finite element model of the joint was developed with material and interface properties based on dedicated small‐scale experiments. The simulation results of strains during a static load test corresponded closely to the DIC measurements. All specimens failed near the composite‐adhesive interface due to delamination of the composite panel.
{"title":"Experimental and numerical analysis of strength and deformation of large‐scale steel‐composite adhesive joints subjected to fatigue followed by static loading","authors":"Pankaj R. Jaiswal, Rahul Iyer Kumar, Franz Bormann, Thibault Juwet, Geert Luyckx, Luc Mouton, Cedric Verhaeghe, Wim De Waele","doi":"10.1111/str.12468","DOIUrl":"https://doi.org/10.1111/str.12468","url":null,"abstract":"Abstract This work reports a study of the fatigue behaviour and quasi‐static strength of full‐scale adhesively bonded steel‐composite joints. Three joints with an approximately 10‐mm‐thick layer of methyl methacrylate adhesive were manufactured in dockyard conditions. One specimen was tensile tested till failure, while two specimens were subjected to ~3.5 million fatigue cycles, followed by a residual tensile test supported with digital image correlation. The shear, longitudinal and peel strain values within the adhesive bondlines are significantly higher at the gripped sides due to the asymmetrical design of the steel brackets. All specimens showed a significantly higher shear strength than the design values defined by the shipbuilder. Fibre Bragg sensors monitored strains at steel and composite constituents and allowed to detect damage onset and evolution in tensile tested specimens. A finite element model of the joint was developed with material and interface properties based on dedicated small‐scale experiments. The simulation results of strains during a static load test corresponded closely to the DIC measurements. All specimens failed near the composite‐adhesive interface due to delamination of the composite panel.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"27 21","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135973699","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract ISO 23228:2011 proposed a testing method in which the plastic material, experimental resins or compounds for pipes and fittings, can be exposed to stress conditions that mimic internally pressurised end‐capped pipes. The stress conditions are mimicked by the use of a plaque specimen having a grooved reduced section called plane–strain grooved tensile (PSGT) specimens producing a biaxial state of stress under uniaxial loading. In this study, PSGT specimens were cut out from high‐density polyethylene (HDPE) pipes. Two shape ratios, ratio between the width and the groove thickness, were used. Both the axial and transverse displacements and strain fields were followed by a digital image correlation (DIC) camera during tensile and creep loading, both at room and high temperature; furthermore, DIC images were used to estimate the notch opening displacement. The increasing effect of the temperature in both the axial and transverse displacement and strain was highlighted. No significant effect of the width was noticed. The results have evidenced that, as the plane–strain condition in the width is assured during the tests, PSGT specimens can be used to mimic internally pressurised pipes under monotonic increasing or constant‐in‐time loading at both room and high temperature, but it must be better to use specimens with a higher shape ratio, that is, higher width. The results contribute to the 9th Sustainable Development Goal: Industry, Innovation and Infrastructure by promoting a sustainable industrialisation and fostering innovation.
ISO 23228:2011提出了一种测试方法，其中用于管道和配件的塑料材料，实验树脂或化合物可以暴露在模拟内部加压端盖管道的应力条件下。应力条件是通过使用具有凹槽减少部分的斑块试样来模拟的，称为平面应变凹槽拉伸(PSGT)试样，在单轴载荷下产生双轴应力状态。在这项研究中，PSGT样品是从高密度聚乙烯(HDPE)管中切割出来的。采用了两种形状比，即沟槽宽度与沟槽厚度之比。在室温和高温拉伸和蠕变加载过程中，用数字图像相关(DIC)相机记录了轴向和横向位移和应变场;此外，DIC图像用于估计缺口开口位移。温度对轴向和横向位移应变均有显著的增加作用。没有注意到宽度的显著影响。结果表明，在保证宽度平面应变条件的情况下，PSGT试样可以模拟室内和高温下单调递增或恒时加载下的内压管道，但必须采用更高的形比，即更高的宽度。其成果通过促进可持续工业化和促进创新，为第九项可持续发展目标:工业、创新和基础设施做出贡献。
{"title":"Plane–strain condition in plane–strain grooved tensile (PSGT) specimens during traction and creep loading at room and high temperature","authors":"C. Ovalle, M. Broudin, L. Laiarinandrasana","doi":"10.1111/str.12467","DOIUrl":"https://doi.org/10.1111/str.12467","url":null,"abstract":"Abstract ISO 23228:2011 proposed a testing method in which the plastic material, experimental resins or compounds for pipes and fittings, can be exposed to stress conditions that mimic internally pressurised end‐capped pipes. The stress conditions are mimicked by the use of a plaque specimen having a grooved reduced section called plane–strain grooved tensile (PSGT) specimens producing a biaxial state of stress under uniaxial loading. In this study, PSGT specimens were cut out from high‐density polyethylene (HDPE) pipes. Two shape ratios, ratio between the width and the groove thickness, were used. Both the axial and transverse displacements and strain fields were followed by a digital image correlation (DIC) camera during tensile and creep loading, both at room and high temperature; furthermore, DIC images were used to estimate the notch opening displacement. The increasing effect of the temperature in both the axial and transverse displacement and strain was highlighted. No significant effect of the width was noticed. The results have evidenced that, as the plane–strain condition in the width is assured during the tests, PSGT specimens can be used to mimic internally pressurised pipes under monotonic increasing or constant‐in‐time loading at both room and high temperature, but it must be better to use specimens with a higher shape ratio, that is, higher width. The results contribute to the 9th Sustainable Development Goal: Industry, Innovation and Infrastructure by promoting a sustainable industrialisation and fostering innovation.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"843 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136069063","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Carotid pulse signal (CPS) is one of the most important biomarkers for evaluating cardiovascular risk. To realize easy‐to‐operate and accurate CPS detection, a single‐camera telecentric imaging stereo‐digital image correlation (stereo‐DIC) system is established. The system uses a specially designed colour separation device and a single colour camera attached with a telecentric lens to record images of blue and red colours from different optical paths. By processing the recorded two sub‐channel colour images using regular stereo‐DIC algorithm, full‐field 3D displacements of the skin on the neck directly over the carotid artery are obtained. The maximum fluctuations in the out‐of‐plane displacement direction are extracted as CPS, based on which velocity, acceleration and frequency can be further extracted. The performance of the established system was demonstrated by detecting the pulse signal of a volunteer before and after exercise.
{"title":"A single‐camera telecentric imaging stereo‐digital image correlation system and its application to carotid pulse signal detection","authors":"Chao Chen, Xiaojun Tang, Bing Pan","doi":"10.1111/str.12466","DOIUrl":"https://doi.org/10.1111/str.12466","url":null,"abstract":"Abstract Carotid pulse signal (CPS) is one of the most important biomarkers for evaluating cardiovascular risk. To realize easy‐to‐operate and accurate CPS detection, a single‐camera telecentric imaging stereo‐digital image correlation (stereo‐DIC) system is established. The system uses a specially designed colour separation device and a single colour camera attached with a telecentric lens to record images of blue and red colours from different optical paths. By processing the recorded two sub‐channel colour images using regular stereo‐DIC algorithm, full‐field 3D displacements of the skin on the neck directly over the carotid artery are obtained. The maximum fluctuations in the out‐of‐plane displacement direction are extracted as CPS, based on which velocity, acceleration and frequency can be further extracted. The performance of the established system was demonstrated by detecting the pulse signal of a volunteer before and after exercise.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"86 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135536930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Hanson‐Lee Harjono, Saranya Ravva, Mahavir Singh, Henry Huang, Vikas Tomar
Abstract In this work, the response of an ammonium perchlorate (AP)‐hydroxyl‐terminated polybutadiene (HTPB) composite material under impact loading is presented, utilizing computational cohesive finite element method (CFEM) simulations that are validated with drop hammer experiments. This study examined the impact behaviour of AP crystal sizes between 200 and 400 μm by varying impact velocities between 3 and 10 m/s. Based on the outcome of CFEM simulations, analysis of variance (ANOVA) tests and a response surface method (RSM) were utilized to construct a mathematical model approximating the relationships between simulation inputs and outcomes. Both computational and experimental results show that the local strain rate has a considerable positive correlation with crystal size, and the rate of temperature change has positive correlations with both crystal size and impact velocity. Further, it was observed that stiffness and compression energy are the primary factors to variances in local strain rate and rate of change of temperature. RSM has been found to be an effective tool for modelling impact responses of materials under varying experimental conditions.
{"title":"Data science assisted cohesive finite element modelling of impact behaviour of AP‐HTPB crystal binder composite","authors":"Hanson‐Lee Harjono, Saranya Ravva, Mahavir Singh, Henry Huang, Vikas Tomar","doi":"10.1111/str.12465","DOIUrl":"https://doi.org/10.1111/str.12465","url":null,"abstract":"Abstract In this work, the response of an ammonium perchlorate (AP)‐hydroxyl‐terminated polybutadiene (HTPB) composite material under impact loading is presented, utilizing computational cohesive finite element method (CFEM) simulations that are validated with drop hammer experiments. This study examined the impact behaviour of AP crystal sizes between 200 and 400 μm by varying impact velocities between 3 and 10 m/s. Based on the outcome of CFEM simulations, analysis of variance (ANOVA) tests and a response surface method (RSM) were utilized to construct a mathematical model approximating the relationships between simulation inputs and outcomes. Both computational and experimental results show that the local strain rate has a considerable positive correlation with crystal size, and the rate of temperature change has positive correlations with both crystal size and impact velocity. Further, it was observed that stiffness and compression energy are the primary factors to variances in local strain rate and rate of change of temperature. RSM has been found to be an effective tool for modelling impact responses of materials under varying experimental conditions.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"2018 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135718955","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jörg Lienhard, Tin Barisin, Hannes Grimm‐Strele, Matthias Kabel, Katja Schladitz, Timo Schweiger
Abstract The mechanical properties of fibre‐reinforced thermoplastics and their dependencies on the manufacturing process, fibre properties, fibre concentration and strain rate have been researched intensively for years in order to predict their macroscopic behaviour by numerical simulations as precisely as possible. Including the microstructure in both real and virtual experiments has improved prediction precision for injection‐moulded glass fibre‐reinforced thermoplastics significantly. In this work, we apply three established methods for characterisation and modelling to an injection‐moulded and to a 3D printed material. The geometric properties of the fibre component as fibre orientation, fibre length and fibre diameter distributions are identified by analysing reconstructed tomographic images. For comparing the fibre lengths, a recently suggested new method is applied. Based on segmentations of the tomographic images, we calculate the elastic stiffness of both composites numerically on the microscale. Finally, the mechanical behaviour of both materials is experimentally characterised by micro tensile tests. The simulation results agree well with the measured stiffness in case of the injection‐moulded material. However, for the 3D printed material, measurement and simulation differ strongly. The prediction from the simulation agrees with the values expected from the image analytic findings on the microstructure. Therefore, the differences in the measured behaviour have to be contributed to the matrix material. This proves demand for further research for 3D printed materials for predictable prototypes, preproduction series and possible serial application.
{"title":"Microstructural characterisation of 3D printed and injection‐moulded glass fibre‐reinforced polypropylene by image analysis, simulation and experimental methods","authors":"Jörg Lienhard, Tin Barisin, Hannes Grimm‐Strele, Matthias Kabel, Katja Schladitz, Timo Schweiger","doi":"10.1111/str.12463","DOIUrl":"https://doi.org/10.1111/str.12463","url":null,"abstract":"Abstract The mechanical properties of fibre‐reinforced thermoplastics and their dependencies on the manufacturing process, fibre properties, fibre concentration and strain rate have been researched intensively for years in order to predict their macroscopic behaviour by numerical simulations as precisely as possible. Including the microstructure in both real and virtual experiments has improved prediction precision for injection‐moulded glass fibre‐reinforced thermoplastics significantly. In this work, we apply three established methods for characterisation and modelling to an injection‐moulded and to a 3D printed material. The geometric properties of the fibre component as fibre orientation, fibre length and fibre diameter distributions are identified by analysing reconstructed tomographic images. For comparing the fibre lengths, a recently suggested new method is applied. Based on segmentations of the tomographic images, we calculate the elastic stiffness of both composites numerically on the microscale. Finally, the mechanical behaviour of both materials is experimentally characterised by micro tensile tests. The simulation results agree well with the measured stiffness in case of the injection‐moulded material. However, for the 3D printed material, measurement and simulation differ strongly. The prediction from the simulation agrees with the values expected from the image analytic findings on the microstructure. Therefore, the differences in the measured behaviour have to be contributed to the matrix material. This proves demand for further research for 3D printed materials for predictable prototypes, preproduction series and possible serial application.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"72 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136060412","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Fibre woven thermoplastic composites (FWTC) are widely used in aerospace and other fields because of their excellent performance. During service, FWTC structures are inevitably subjected to low‐velocity impact (LVI), which can cause invisible damage and eventual failure of the material. At the moment, studies on FWTC mostly focused on the orthogonal woven yarns while there's few reports about the effect of the yarn angle changing on the woven material's LVI damage response. This study aims at the effect of yarn angle changing on the damage behaviour of FWTC. A method for preparation of nonorthogonal prepregs was proposed, by which FWTC laminates with different yarn angles (60°, 75°, and 90°) were prepared for LVI tests. The results show that the maximum impact displacement and the impact duration of the impactor decrease with the decrease of the yarn angle when the FWTC laminate is subjected to LVI, while the maximum impact force shows an increasing trend. This indicates that the smaller yarn angle causes the better load‐bearing capacity of the FWTC laminate under LVI conditions, while the orthogonal FWTC laminate is more ductile. The damage morphology indicated by the impact of the FWTC laminate are matrix cracks and yarn breaks, and the damage area increases with the decrease of yarn angle, where the damage of orthogonal laminate is more serious more concentrated. The results found in this paper can provide useful guidance for engineering applications and failure analysis of FWTC.
{"title":"Effect of woven yarn angle on the low‐velocity impact damage response of fibre woven thermoplastic composites","authors":"Sasa Gao, Yunjie Zhang, Zeyu Wang, Zuwang Yu","doi":"10.1111/str.12464","DOIUrl":"https://doi.org/10.1111/str.12464","url":null,"abstract":"Abstract Fibre woven thermoplastic composites (FWTC) are widely used in aerospace and other fields because of their excellent performance. During service, FWTC structures are inevitably subjected to low‐velocity impact (LVI), which can cause invisible damage and eventual failure of the material. At the moment, studies on FWTC mostly focused on the orthogonal woven yarns while there's few reports about the effect of the yarn angle changing on the woven material's LVI damage response. This study aims at the effect of yarn angle changing on the damage behaviour of FWTC. A method for preparation of nonorthogonal prepregs was proposed, by which FWTC laminates with different yarn angles (60°, 75°, and 90°) were prepared for LVI tests. The results show that the maximum impact displacement and the impact duration of the impactor decrease with the decrease of the yarn angle when the FWTC laminate is subjected to LVI, while the maximum impact force shows an increasing trend. This indicates that the smaller yarn angle causes the better load‐bearing capacity of the FWTC laminate under LVI conditions, while the orthogonal FWTC laminate is more ductile. The damage morphology indicated by the impact of the FWTC laminate are matrix cracks and yarn breaks, and the damage area increases with the decrease of yarn angle, where the damage of orthogonal laminate is more serious more concentrated. The results found in this paper can provide useful guidance for engineering applications and failure analysis of FWTC.","PeriodicalId":21972,"journal":{"name":"Strain","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134970543","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2009-06-01DOI: 10.1111/j.1475-1305.2008.00490.x
C Furlong, J J Rosowski, N Hulli, M E Ravicz
Computer-aided, personal computer (PC) based, optoelectronic holography (OEH) was used to obtain preliminary measurements of the sound-induced displacement of the tympanic membrane (TM) of cadaver cats and chinchillas. Real-time time-averaged holograms, processed at video rates, were used to characterise the frequency dependence of TM displacements as tone frequency was swept from 400 Hz to 20 kHz. Stroboscopic holography was used at selected frequencies to measure, in full-field-of-view, displacements of the TM surface with nanometer resolution. These measurements enable the determination and the characterisation of inward and outward displacements of the TM. The time-averaged holographic data suggest standing wave patterns on the cat's TM surface, which move from simple uni-modal or bi-modal patterns at low frequencies, through complicated multimodal patterns above 3 kHz, to highly ordered arrangements of displacement waves with tone frequencies above 15 kHz. The frequency boundaries of the different wave patterns are lower in chinchilla (simple patterns below 600 Hz, ordered patterns above 4 kHz) than cat. The stroboscopic holography measurements indicate wave-like motion patterns on the TM surface, where the number of wavelengths captured along sections of the TM increased with stimulus frequency with as many as 11 wavelengths visible on the chinchilla TM at 16 kHz. Counts of the visible number of wavelengths on TM sections with different sound stimulus frequency provided estimates of wave velocity along the TM surface that ranged from 5 m s(-1) at frequencies below 8 kHz and increased to 25 m s(-1) by 20 kHz.
采用计算机辅助、基于个人计算机(PC)的光电全息技术(OEH)对猫尸和龙猫的鼓膜声源位移进行了初步测量。以视频速率处理的实时时间平均全息图用于表征音调频率从400 Hz扫至20 kHz时TM位移的频率依赖性。频闪全息术在选定的频率下，以纳米分辨率测量TM表面的全视场位移。这些测量使TM向内和向外位移的测定和表征成为可能。时间平均全息数据表明，猫TM表面的驻波模式，从简单的低频单峰或双峰模式，通过复杂的3千赫以上的多峰模式，到音调频率高于15千赫的高度有序的位移波排列。栗鼠不同波型的频率边界(600赫兹以下的简单波型，4千赫以上的有序波型)比猫低。频闪全息测量显示了TM表面的波状运动模式，其中沿TM部分捕获的波长数量随着刺激频率的增加而增加，在16 kHz时，在栗鼠TM上可以看到多达11个波长。对不同声刺激频率TM切片上可见波长数的计数提供了沿TM表面波速的估计，在频率低于8 kHz时从5 m s(-1)到20 kHz时增加到25 m s(-1)。
{"title":"Preliminary Analyses of Tympanic-Membrane Motion from Holographic Measurements.","authors":"C Furlong, J J Rosowski, N Hulli, M E Ravicz","doi":"10.1111/j.1475-1305.2008.00490.x","DOIUrl":"https://doi.org/10.1111/j.1475-1305.2008.00490.x","url":null,"abstract":"<p><p>Computer-aided, personal computer (PC) based, optoelectronic holography (OEH) was used to obtain preliminary measurements of the sound-induced displacement of the tympanic membrane (TM) of cadaver cats and chinchillas. Real-time time-averaged holograms, processed at video rates, were used to characterise the frequency dependence of TM displacements as tone frequency was swept from 400 Hz to 20 kHz. Stroboscopic holography was used at selected frequencies to measure, in full-field-of-view, displacements of the TM surface with nanometer resolution. These measurements enable the determination and the characterisation of inward and outward displacements of the TM. The time-averaged holographic data suggest standing wave patterns on the cat's TM surface, which move from simple uni-modal or bi-modal patterns at low frequencies, through complicated multimodal patterns above 3 kHz, to highly ordered arrangements of displacement waves with tone frequencies above 15 kHz. The frequency boundaries of the different wave patterns are lower in chinchilla (simple patterns below 600 Hz, ordered patterns above 4 kHz) than cat. The stroboscopic holography measurements indicate wave-like motion patterns on the TM surface, where the number of wavelengths captured along sections of the TM increased with stimulus frequency with as many as 11 wavelengths visible on the chinchilla TM at 16 kHz. Counts of the visible number of wavelengths on TM sections with different sound stimulus frequency provided estimates of wave velocity along the TM surface that ranged from 5 m s(-1) at frequencies below 8 kHz and increased to 25 m s(-1) by 20 kHz.</p>","PeriodicalId":21972,"journal":{"name":"Strain","volume":"45 3","pages":"301-309"},"PeriodicalIF":2.1,"publicationDate":"2009-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1111/j.1475-1305.2008.00490.x","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"28757565","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"OA","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：