Medical Science Monitor Basic Research最新文献

BACKGROUND Adult intussusception (AI) is a rare condition with diverse clinical presentations and management challenges. Despite its rarity, understanding its epidemiology, clinical features, and predictive factors distinguishing benign and malignant lead points is crucial for effective management. This study aimed to assess the demographic and clinical characteristics of patients with pathological AI and examine factors associated with malignant lead points. MATERIAL AND METHODS Medical records of patients aged >18 years with diagnosis of AI between January 1, 2014, and January 1, 2024 were retrospectively analyzed. Patients were classified based on location and etiology of intussusception. Predictive factors for malignant lead points were assessed, including age, sex, presenting symptoms, location, and size of intussusception. Computed tomography (CT) scan images were reviewed for diagnosis confirmation. Transient small bowel intussusceptions and intussusceptions related to feeding tubes were excluded. RESULTS Twenty-six cases of pathological AI were identified over 10 years, with a male predominance (69.2%) and a mean age of 53.3 years. Abdominal pain was the most common presenting symptom (65.4%), with bowel obstruction diagnosed in 23.1% of cases. CT scans were the primary diagnostic modality (92.3%). Colocolic intussusceptions were most prevalent (53.8%), and surgical management was common (69.2%). Histopathological examination revealed benign lead points in the majority (57.7%) of cases, with lipomas and polyps being the most common. Bleeding per rectum was significantly associated with malignant lead points (P=0.011). CONCLUSIONS AI presents with diverse clinical features. It predominantly affects the colon. Bleeding per rectum indicates a higher likelihood of malignant lead points. A multidisciplinary approach is essential for optimal case-based management.

BACKGROUND The development and progression of prostate cancer are multistep processes involving several growth factors, hormones, and cytokines. This study aimed to measure the serum concentrations of different cytokines and determine their correlation with prostate-specific antigen (PSA) levels and disease grade in patients with prostate adenocarcinoma. MATERIAL AND METHODS This cross-sectional study was conducted from March 2023 to March 2024 at the Clinic of Oncology of the University Hospital Center in Mostar, Bosnia and Herzegovina. Altogether, 50 male patients with prostate adenocarcinoma were included, of whom 28 had no proven metastases (PC group) and 22 had metastatic disease (MPC group). Serum concentrations of total (tPSA), free (fPSA), and complexed (cPSA) PSA were determined using a chemiluminescent microparticle immunoassay, whereas serum concentrations of cytokines were measured using a flow cytometry bead-based assay. RESULTS The MPC group had higher serum tPSA, fPSA, and cPSA levels than the PC group. The PC group had significantly higher serum levels of monocyte chemotactic protein (MCP)-1 than the MPC group (P=0.008). In the PC group, serum levels of interleukin (IL)-10 significantly correlated with cPSA. In the MPC group, serum concentrations of IL-1ß, tumor necrosis factor (TNF)-alpha, and IL-23 significantly correlated with disease grade. CONCLUSIONS Our study emphasizes the importance of MCP-1 in the development of prostate cancer, while IL-10 was the only cytokine whose serum level significantly correlated with cPSA. Serum concentrations of IL-1ß, TNF-alpha, and IL-23 may serve as potential biomarkers for disease grade.

BACKGROUND Intravenous ciprofol is a short-acting sedative with minimal respiratory and circulatory suppression and limited analgesia. Intravenous lidocaine provides analgesia during surgical procedures. This study included 70 patients who underwent gastroscopy with analgesia and aimed to evaluate the effects of intravenous lidocaine on the dose of ciprofol required to produce 50% of the maximal effect (ED50). MATERIAL AND METHODS Seventy patients scheduled for elective painless gastroscopy were randomly assigned into 2 groups: group L (n=35, received ciprofol and 1.5 mg/kg lidocaine) and group S (n=35, received ciprofol and normal saline). The primary outcomes measured were the ED50 and the 95% effective dose (ED95) of ciprofol, determined using the modified up-down sequential method and Probit analysis. Secondary outcomes included induction, operation, and recovery times; monitoring of vital signs such as mean arterial pressure, heart rate, and oxygen saturation; and evaluation of postoperative adverse reactions, including sore throat, nausea, vomiting, abdominal pain, and satisfaction scores from endoscopists and anesthesiologists. RESULTS The ED50 of ciprofol in group L was 0.315 mg/kg (95% CI, 0.291-0.342 mg/kg), which was significantly lower than that in group S, 0.42 mg/kg (95% CI, 0.371-0.491 mg/kg). Additionally, group L exhibited shorter induction and recovery times, a lower incidence of postoperative sore throat, and a temporary drop in blood pressure following induction. CONCLUSIONS Intravenous lidocaine during painless gastroscopy reduces the required ciprofol dose, shortens induction and recovery times, and lowers the incidence of postoperative complications, such as sore throat. These findings support its effective role in improving sedation quality and patient outcomes during gastroscopy.

BACKGROUND Modern prosthetic technologies make it possible to fabricate prosthetic restorations without material loss and to make prosthetic restorations with complex geometric shapes in a relatively simple way. One such technology is selective laser melting (SLM), or additive manufacturing of metal materials, better known as 3D printing from metal or selective laser melting, but currently the most commonly used method is casting. The present study investigated use of dental chromium-cobalt alloys for prosthetic bridges and compared methods of processing dental chromium-cobalt alloys to obtain the best mechanical properties. MATERIAL AND METHODS We used dental chromium-cobalt alloy (SCHEFTNER GMBH) for laser melting StarbondCoSEeasy Powder with grain size of 10-30 µm and StarbondCoS alloy casting, made in accordance with the European standard EN ISO 22674. SLM-made specimens and induction melted alloy castings were prepared for the study. A centrifugal casting system with induction current melting of the metal alloy was used to produce the samples. The melting and casting process is automatic and limits changes in chemical composition. RESULTS The results show that none of the samples changed their chemical composition, while the samples made by SLM had better mechanical properties. CONCLUSIONS The SLM technique makes it possible to produce restorations faster and cheaper without any loss of quality compared to restorations made with the casting technique. Casting technology reduces mechanical properties, but still provides good mechanical properties.

BACKGROUND Urogenital bacterial infections have a high incidence in humans. The most frequent cause of infections of the urogenital tract is gram-negative bacteria. Antibiotics are very effective in curing infectious diseases but they are accompanied by health complications. Probiotics are live microorganisms that are believed to confer a beneficial effect on human health when consumed in adequate amounts. This study aimed to compare outcomes from antibiotic treatment with and without the use of probiotics in 897 patients with lower urogenital tract infections, including cystitis, urethritis, prostatitis, and vulvovaginitis. MATERIAL AND METHODS A total of 897 patients aged 18 to 55 years were included in this research. Patients were divided into an intervention group including 460 patients (254 women, 206 men) and a comparison group including 437 patients (240 women, 197 men). The probiotics received by patients were capsules of ProBalans®. The diagnosis of cystitis, urethritis, prostatitis, vulvovaginitis, and sexually transmitted infection was done using several tests, and antibiotics were used for treatment. Qualitative data were analyzed using the chi-square or Fisher exact test. RESULTS We found a significant difference regarding patients' impressions of improvement after therapy between patients in the intervention group and the comparison group. CONCLUSIONS Use of probiotics together with antibiotics in the treatment of urogenital tract infection can help to reduce the adverse effects of antibiotics, increase the efficiency of antibiotic therapy, and reduce bacterial resistance to antibiotics. However, further research is needed to confirm these potential health benefits.

BACKGROUND Cosmetics are applied topically to enhance appearance and are commonly used by women of all ages. Cosmetics contain many chemical agents, but the incidence of adverse reactions is low, possibly due to underreporting. This questionnaire-based study included 392 women to evaluate information on the types of cosmetics purchased between December 2018 and March 2019, their use by the women surveyed, and their associated adverse events. MATERIAL AND METHODS A cross-sectional study was conducted among 392 women in Abbottabad, Pakistan, using a pre-structured and validated questionnaire to evaluate information on the types of cosmetics, their use, and their associated adverse events. Part 1 of the study collected information about demographics. Part 2 contained a total of 11 items, and collected the frequency of use of cosmetic on skin and hair care products. Part 3 consisted of 4 items and collected information about problems encountered due to the use of cosmetics. RESULTS In the winter season, 47.7% (n=187) of women preferred chemical-based cosmetic products, while 30.9% (n=121) preferred Ayurvedic products. Among commonly used cosmetic products, 26.9% (n=106) of women used foundations. The most frequently used skin care product was face wash 39.5% (n=155). The most prevalent adverse events related to cosmetics were pimples (19.9%, n=78), redness (17.6%, n=69), and eye discomfort (15.8%, n=62). Furthermore, 51.3% (n=201) strongly agreed that cosmetics aid in getting a whiter complexion. CONCLUSIONS The survey concluded that most women preferred cosmetics with a chemical base, which are associated with rashes, redness, and acne. It is important to encourage cosmetovigilance and awareness campaigns among cosmetic product sellers and users.

BACKGROUND Healthcare providers, particularly in dentistry and medicine, experience high stress levels, exacerbated by factors like patient anxiety, clinical work, and continuous training. The COVID-19 pandemic has further increased these risks. This study aimed to assess depression, anxiety, and stress (DAS) among dental and medical practitioners in Saudi Arabia, investigating influential factors on their psychological behavior. MATERIAL AND METHODS In this cross-sectional study conducted in July and August 2021, the depression, anxiety, and stress scale (DASS-21) was administered through a Google questionnaire. Data analysis involved stepwise mode modeling and bivariate analysis, with a significant P value <0.05, using the Statistical Package for the Social Sciences. RESULTS The study included 376 dentists and 201 medical practitioners. Most worked more than four days a week, slept under six hours nightly, and were non-smokers. DAS scores indicated depression (51.7-57.4%), anxiety (50.7-58.2%), and stress (54.2-60.1%). Significant differences (P<0.05) were observed among younger, single, female, and lower-income participants. Higher DAS scores correlated with less sleep, extensive social media use, and smoking history. Socio-demographic factors were mostly non-significant for medical practitioners, except social media use. Sleep duration significantly impacted stress levels, while specialty, income, and marital status influenced depression CONCLUSIONS DAS levels were notably higher in dentists compared to medical practitioners, particularly regarding anxiety. The impact of socioeconomic factors varied, being more statistically significant for dentists.

BACKGROUND Replicating the 3-dimensional (3D) color of natural teeth in artificial substitutes is challenging. Fixed dental prosthodontics require aesthetic, color-stable provisional restorations. Recent milling and 3D printing digital manufacturing techniques offer improved outcomes. This study assesses color stability in various digital manufacturing methods, tapers, and aging effects on anterior provisional resin restorations. MATERIAL AND METHODS Two all-ceramic tooth preparations on typodont teeth with 10° and 20° tapers were converted into experimental dies. Forty temporary crowns were manufactured using 3D printing and computer-aided design/computer-aided manufacturing (milling). Within these 2 groups, 10 crowns were cemented using a regular and clear provisional cement. All samples were thermocycled to simulate clinical use of 6 months. Color difference formula (CIEDE2000) indicated changes between before and after cementation (ΔE00) and between after cementation and after thermocycling (ΔE00[II]). The color change was considered significant in terms of clinically perceptible (ΔE00 ≤0.62) and acceptable (ΔE00 ≤2.62) changes. One-way ANOVA (P value of less than 0.05) calculated overall differences, which were established using a Fisher post hoc test. RESULTS Crowns cemented with clear cement showed fewer color changes irrespective of the manufacturing technique or taper. Notably, only the 10° 3D-printed crown with clear cement had an imperceptible color change at the pre-/post-cementation phase. Meanwhile, the 10° and 20° milled crowns with regular cement exhibited unacceptable color changes after thermocycling. CONCLUSIONS For long‑term temporization in the aesthetic zone, properly optimized 3D-printed provisional restorations cemented with clear cement had better color stability.

BACKGROUND The COVID-19 pandemic has brought changes and challenges to nursing students. However, little is known about the prevalence of academic burnout among nursing students in this challenging circumstance. This study aimed to assess nursing student academic burnout and its influencing factors. MATERIAL AND METHODS We conducted a sample survey of a 4-year undergraduate nursing university in Wuhu, Anhui Province, China. The social-demographic information questionnaire, Academic Burnout Scale, Connor-Davidson Resilience Scale, Impact of Event Scale-6, Patient Health Questionnaire-2, and Professional Identity Scale were used. Stepwise multiple linear regression was used to clarify the relationship among sociodemographic characteristics, resilience, and academic burnout. RESULTS Of all the study participants, 51.30% had a certain degree of academic burnout. Academic year, satisfaction with specialty, satisfaction with online learning, professional identity, and psychological resilience were negatively correlated with academic burnout among nursing students. Depression was positively correlated with academic burnout. CONCLUSIONS Nursing students had a high degree of academic burnout. Academic year, satisfaction with specialty, satisfaction with online learning, professional identity, and psychological resilience were protective factors that reduced nursing students' academic burnout.