Pub Date : 2021-12-26DOI: 10.34010/injiiscom.v2i2.6668
Faez M. Hassan, Hussein Abdelwahab Mossa
Regional surveys will have a high demand for coverage. To adequately cover a large area while retaining high resolution, mosaics of the area from a variety of scenes can be created. This paper describes a mosaicking procedure that consists of a series of processing steps used to combine multiple aerial images. These images were taken from CropCam unmanned aerial platform flight missions over the desired area to quickly map a large geographical region. The results of periodic processing can be compared and analyzed to monitor a large area for future research or during an emergency situation in the covered area. Digital imagery captured from the air has proven to be a valuable resource for studying land cover and land use. For this study, airborne digital camera images were chosen because they provide data with a higher spatial resolution for trying to map a small research area. On board the UAV autopilot, images were captured from an elevation of 320 meters using a standard digital camera. When compared to other airborne studies, this technique was less expensive and more cost effective. According to this study, onboard a UAV autopilot, a digital camera serves as a sensor, which can be helpful in planning and developing a limited coverage area after mosaicking
{"title":"Image Mosaicking Using Low-Distance High-Resolution Images Captured by an Unmanned Aerial Vehicle","authors":"Faez M. Hassan, Hussein Abdelwahab Mossa","doi":"10.34010/injiiscom.v2i2.6668","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i2.6668","url":null,"abstract":"Regional surveys will have a high demand for coverage. To adequately cover a large area while retaining high resolution, mosaics of the area from a variety of scenes can be created. This paper describes a mosaicking procedure that consists of a series of processing steps used to combine multiple aerial images. These images were taken from CropCam unmanned aerial platform flight missions over the desired area to quickly map a large geographical region. The results of periodic processing can be compared and analyzed to monitor a large area for future research or during an emergency situation in the covered area. Digital imagery captured from the air has proven to be a valuable resource for studying land cover and land use. For this study, airborne digital camera images were chosen because they provide data with a higher spatial resolution for trying to map a small research area. On board the UAV autopilot, images were captured from an elevation of 320 meters using a standard digital camera. When compared to other airborne studies, this technique was less expensive and more cost effective. According to this study, onboard a UAV autopilot, a digital camera serves as a sensor, which can be helpful in planning and developing a limited coverage area after mosaicking","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115105730","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-26DOI: 10.34010/injiiscom.v2i2.6041
Yonathan Andri Hermawan, L. Warlina, M. Mohd
Fires in residential areas are one of the threats out of 13 disasters in Indonesia. Fires are disasters based on their causes, classified as disasters caused by human negligence. This research aims to identify residential fire incidents, assess fire risk levels, and map the risk level. We used the geographic information system (GIS) analysis approach and direct observation of the study area. The research location was in the Tamansari sub-district in Bandung City. The subdistrict of Tamansari consists of 20 neighborhood units (rukun warga/ RW) with 22,995 people and 6,598 households. We conducted a field survey from December 2019 to March 2020. We used a spatial approach to analyze fire risk in this residential area by using GIS to map urban-village regional fire incidents and assess the risk level. There were four fire hazard variables: population density, building density, building quality, road class. On the other hand, vulnerability variables are based on the community's social parameters: population density, percentage of old age and children under five, people with disabilities, and the population's sex ratio. The hazard and vulnerability maps overlay showed three neighborhood units (rukun warga/ RW) with a high risk of fire, eight RWs with a moderate risk of residential fires, and nine RWs with a low risk of residential fires. The areas with low-risk categories must remain vigilant because the width of the roads in these areas is relatively narrow.
{"title":"GIS-based urban village regional fire risk assessment and mapping","authors":"Yonathan Andri Hermawan, L. Warlina, M. Mohd","doi":"10.34010/injiiscom.v2i2.6041","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i2.6041","url":null,"abstract":"Fires in residential areas are one of the threats out of 13 disasters in Indonesia. Fires are disasters based on their causes, classified as disasters caused by human negligence. This research aims to identify residential fire incidents, assess fire risk levels, and map the risk level. We used the geographic information system (GIS) analysis approach and direct observation of the study area. The research location was in the Tamansari sub-district in Bandung City. The subdistrict of Tamansari consists of 20 neighborhood units (rukun warga/ RW) with 22,995 people and 6,598 households. We conducted a field survey from December 2019 to March 2020. We used a spatial approach to analyze fire risk in this residential area by using GIS to map urban-village regional fire incidents and assess the risk level. There were four fire hazard variables: population density, building density, building quality, road class. On the other hand, vulnerability variables are based on the community's social parameters: population density, percentage of old age and children under five, people with disabilities, and the population's sex ratio. The hazard and vulnerability maps overlay showed three neighborhood units (rukun warga/ RW) with a high risk of fire, eight RWs with a moderate risk of residential fires, and nine RWs with a low risk of residential fires. The areas with low-risk categories must remain vigilant because the width of the roads in these areas is relatively narrow.","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"44 2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132746717","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.5415
Yusrianti Sabrina Kurniadianti, Adzra Zahra Ziva, Yuni Kartika Suryana, R. Ragadhita, A. Nandiyanto, T. Kurniawan
This study aims to demonstrate computation in the techno-economic analysis of the production of aluminum oxide (Al2O3) using the precipitation method on an industrial scale. This evaluation is based on the perspective of technical and economic evaluation. Several economic evaluation parameters were analyzed to obtain potential information from the manufacture of Al2O3 nanoparticles based on gross profit margin, payback period, and cumulative net present value. The results of this study identified that the manufacture of Al2O3 nanoparticles using the precipitation method could be done industrially. Based on the engineering perspective, Al2O3 nanoparticles can be produced as much as 6.9 tons and earn an annual profit of 144,635.69 USD with a period of 20 years. To ensure that this project can be carried out, an economic evaluation is made based on estimates of ideal and non-ideal conditions, including tax increases, sales changes, raw material prices, utility prices, and labor’s salary. This study is expected to provide information for the manufacture of Al2O3 nanoparticles using the precipitation method on an industrial scale.
{"title":"Computation in the Analysis of Techno-Economic of the Production of Al2O3 (Aluminum Oxide) Nanoparticles through Precipitation Method","authors":"Yusrianti Sabrina Kurniadianti, Adzra Zahra Ziva, Yuni Kartika Suryana, R. Ragadhita, A. Nandiyanto, T. Kurniawan","doi":"10.34010/injiiscom.v2i1.5415","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.5415","url":null,"abstract":"This study aims to demonstrate computation in the techno-economic analysis of the production of aluminum oxide (Al2O3) using the precipitation method on an industrial scale. This evaluation is based on the perspective of technical and economic evaluation. Several economic evaluation parameters were analyzed to obtain potential information from the manufacture of Al2O3 nanoparticles based on gross profit margin, payback period, and cumulative net present value. The results of this study identified that the manufacture of Al2O3 nanoparticles using the precipitation method could be done industrially. Based on the engineering perspective, Al2O3 nanoparticles can be produced as much as 6.9 tons and earn an annual profit of 144,635.69 USD with a period of 20 years. To ensure that this project can be carried out, an economic evaluation is made based on estimates of ideal and non-ideal conditions, including tax increases, sales changes, raw material prices, utility prices, and labor’s salary. This study is expected to provide information for the manufacture of Al2O3 nanoparticles using the precipitation method on an industrial scale.","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130945466","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.5457
Hanhan Maulana, S. L. B. Ginting, Pramanda Aryan, Muhamad Restu Fadillah, Rubi Nurajmi Kamal
This study aims to analyze the use of the Internet of Things (IoT) in supporting the management of food supply chains (FSCs) in the food industry. This research used qualitative research methods. The results obtained from this study are increasing the effectiveness and efficiency of the existing food supply chain in the food industry by applying the IoT concept to food supply chain management. These results can be obtained because the IoT concept is supported by various systems and technologies that can be implemented and developed so that IoT can help identify and deal with existing problems more quickly while being able to assist in the decision-making process with information obtained through IoT technology so that it will support development food supply chain management in the food industry. This study was conducted to see how much influence the internet of things (IoT) has on food supply chain management in the food industry.
{"title":"Utilization of Internet of Things on Food Supply Chains in Food Industry","authors":"Hanhan Maulana, S. L. B. Ginting, Pramanda Aryan, Muhamad Restu Fadillah, Rubi Nurajmi Kamal","doi":"10.34010/injiiscom.v2i1.5457","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.5457","url":null,"abstract":"This study aims to analyze the use of the Internet of Things (IoT) in supporting the management of food supply chains (FSCs) in the food industry. This research used qualitative research methods. The results obtained from this study are increasing the effectiveness and efficiency of the existing food supply chain in the food industry by applying the IoT concept to food supply chain management. These results can be obtained because the IoT concept is supported by various systems and technologies that can be implemented and developed so that IoT can help identify and deal with existing problems more quickly while being able to assist in the decision-making process with information obtained through IoT technology so that it will support development food supply chain management in the food industry. This study was conducted to see how much influence the internet of things (IoT) has on food supply chain management in the food industry.","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"462 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124198585","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.4881
A. Supriyadi, Tao Wang, Melda Ria Juwita, Rayhan Gunaningrat, Susi Safitri, G. Cirella
In response to governance shift in Indonesia, a heavy burden of responsibility is placed on local authorities to act in the best interest of its citizenry. This study examined evidence of local government policy, economic structure, and economic growth in the new autonomous city of Banjar Municipality, West Java Province, Indonesia and assessed determinants of regional transformation. The methodology used location quotient, analysis, shift-share analysis, and ordinary least square regression analysis. The findings revealed in the ten-year period of the study on agriculture, business trade, accommodation, other sectors and public service dominated the structure of the economy. In terms of the authority, the Municipality’s policy of sustainability is aimed at protecting the traditional market and developing local road infrastructure—contributing to its economic growth. Sustainability-oriented policies are designed to stress order, control, and accelerate economic activities which regional authorities sometimes considering them as challenging due to transitional requirements and demands
{"title":"Sustainability Policy in Indonesia: Case Study Economic Structure and Determinants in Banjar Municipality","authors":"A. Supriyadi, Tao Wang, Melda Ria Juwita, Rayhan Gunaningrat, Susi Safitri, G. Cirella","doi":"10.34010/injiiscom.v2i1.4881","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.4881","url":null,"abstract":"In response to governance shift in Indonesia, a heavy burden of responsibility is placed on local authorities to act in the best interest of its citizenry. This study examined evidence of local government policy, economic structure, and economic growth in the new autonomous city of Banjar Municipality, West Java Province, Indonesia and assessed determinants of regional transformation. The methodology used location quotient, analysis, shift-share analysis, and ordinary least square regression analysis. The findings revealed in the ten-year period of the study on agriculture, business trade, accommodation, other sectors and public service dominated the structure of the economy. In terms of the authority, the Municipality’s policy of sustainability is aimed at protecting the traditional market and developing local road infrastructure—contributing to its economic growth. Sustainability-oriented policies are designed to stress order, control, and accelerate economic activities which regional authorities sometimes considering them as challenging due to transitional requirements and demands","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130077881","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.4862
H. Kanai, Akinori Kumazawa
Currently, Japan is rapidly aging. Japanese government agencies report that the percentage of elderly people whose ages are at least 65 years will increase by up to about 30 percent in 2025. As one of the measures towards this situation, the community-based integrated healthcare system will be introduced in Japan. The system aims to provide elderly people living at home with appropriate health, medical, and welfare services. We focus on the burden of sharing information on the situation of the elderly at home among health, medical, welfare staffs, and neighbors. We have been developing a supporting system for sharing information on the situation of the elderly at home and conducted a field test around one year. We consider that various stakeholders involved in the community comprehensive health care system could recognize the importance of information sharing and collaboration with them through this kind of social implementation
{"title":"An Information Sharing System for Multi-Professional Collaboration in the community-based integrated healthcare system","authors":"H. Kanai, Akinori Kumazawa","doi":"10.34010/injiiscom.v2i1.4862","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.4862","url":null,"abstract":"Currently, Japan is rapidly aging. Japanese government agencies report that the percentage of elderly people whose ages are at least 65 years will increase by up to about 30 percent in 2025. As one of the measures towards this situation, the community-based integrated healthcare system will be introduced in Japan. The system aims to provide elderly people living at home with appropriate health, medical, and welfare services. We focus on the burden of sharing information on the situation of the elderly at home among health, medical, welfare staffs, and neighbors. We have been developing a supporting system for sharing information on the situation of the elderly at home and conducted a field test around one year. We consider that various stakeholders involved in the community comprehensive health care system could recognize the importance of information sharing and collaboration with them through this kind of social implementation","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126360467","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.5347
S. Malik, Shivendra V. Singh, Narendra Mohan Singh, Naman Panwar
Covid-19 is also a wide spreading infective agent disease that infects humans. A clinical study of COVID-19 infected patients has shown that these kinds of patients are square measure principally infected from a respiratory organ infection when come in contact with this disease. Chest xray (i.e., radiography) a less complicated imaging technique for identification respiratory organ connected issues. Deep learning is that the foremost undefeated technique of machine learning, that provides helpful analysis to review an oversize quantity of chest x-ray pictures which may critically impact on screening of Covid-19. Throughout this work, we have taken the PA read of chest x-ray scans for covid-19 affected patients conjointly as healthy patients. We have used deep learning-based CNN models and compared their performance. We have equate ResNeXt models and inspect their precision to investigate the model presentation, 6432 chest x-ray scans samples square measure collected from the Kaggle repository. This work solely core on potential ways of cluster covid-19 infected patients.
{"title":"Diagnosis of COVID-19 Using Chest X-ray","authors":"S. Malik, Shivendra V. Singh, Narendra Mohan Singh, Naman Panwar","doi":"10.34010/injiiscom.v2i1.5347","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.5347","url":null,"abstract":"Covid-19 is also a wide spreading infective agent disease that infects humans. A clinical study of COVID-19 infected patients has shown that these kinds of patients are square measure principally infected from a respiratory organ infection when come in contact with this disease. Chest xray (i.e., radiography) a less complicated imaging technique for identification respiratory organ connected issues. Deep learning is that the foremost undefeated technique of machine learning, that provides helpful analysis to review an oversize quantity of chest x-ray pictures which may critically impact on screening of Covid-19. Throughout this work, we have taken the PA read of chest x-ray scans for covid-19 affected patients conjointly as healthy patients. We have used deep learning-based CNN models and compared their performance. We have equate ResNeXt models and inspect their precision to investigate the model presentation, 6432 chest x-ray scans samples square measure collected from the Kaggle repository. This work solely core on potential ways of cluster covid-19 infected patients.","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127040098","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.4863
H. Purnomo, F. R. Fitrah, R. Maulana, M. M. Pratadina
This study aims to apply the information system to every business owner who can inform businesses beverage container business through information technology. The function of this information system's application is for business owners and customers interested in buying products business. This study is an application of information systems in the Indonesian Traditional Beverage Business. This study's method was conducted using qualitative descriptive writing method of collecting data through literature study and observation to the growing beverage business owners. Information system development is conducted using the waterfall method. The results of this study show an overview of how the information system is expected by the business owner as well as the beverage business impact that can provide the quality of the business product beverage business is being run. The conclusion is that there is a large information container such as a website application applied to the Indonesian traditional beverage business so that website visitors can see, buy, or provide suggestions or comments regarding the already available products
{"title":"Implementation of Information System in Indonesian Traditional Beverage Businesses","authors":"H. Purnomo, F. R. Fitrah, R. Maulana, M. M. Pratadina","doi":"10.34010/injiiscom.v2i1.4863","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.4863","url":null,"abstract":"This study aims to apply the information system to every business owner who can inform businesses beverage container business through information technology. The function of this information system's application is for business owners and customers interested in buying products business. This study is an application of information systems in the Indonesian Traditional Beverage Business. This study's method was conducted using qualitative descriptive writing method of collecting data through literature study and observation to the growing beverage business owners. Information system development is conducted using the waterfall method. The results of this study show an overview of how the information system is expected by the business owner as well as the beverage business impact that can provide the quality of the business product beverage business is being run. The conclusion is that there is a large information container such as a website application applied to the Indonesian traditional beverage business so that website visitors can see, buy, or provide suggestions or comments regarding the already available products","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130364831","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-06-25DOI: 10.34010/injiiscom.v2i1.4864
L. Puspitawati, A. Nurhasanah, A. Khaerunnisa
Advances in technology, computers, and telecommunications support the development of internet technology. Currently, the IT function in society has begun to change. Initially, the IT function as a means of exchanging electronic information to an application that is used to implement corporate business strategies such as marketing, sales, and customer service activities. The purpose of this study is to get empirical evidence of the benefits of using communication technology for business people. This research used a descriptive method by conducting a survey in the form of a questionnaire and conducting several further interviews. The results showed that using communication technology such as the Digital Platform can make it easier for sellers to market products and make it easier to interact with buyers. This research discusses that using communication technology such as the Digital Platform is one of the best business strategies. The conclusion obtained in this study is that the Digital Platform is the best solution to expand business networks and make it easier for sellers and buyers to make transactions. The benefit of doing this research is to find out the meaning and purpose of developing business communication by involving digital technology in marketing products or services.
{"title":"Utilization of Communication Technology for Business","authors":"L. Puspitawati, A. Nurhasanah, A. Khaerunnisa","doi":"10.34010/injiiscom.v2i1.4864","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.4864","url":null,"abstract":"Advances in technology, computers, and telecommunications support the development of internet technology. Currently, the IT function in society has begun to change. Initially, the IT function as a means of exchanging electronic information to an application that is used to implement corporate business strategies such as marketing, sales, and customer service activities. The purpose of this study is to get empirical evidence of the benefits of using communication technology for business people. This research used a descriptive method by conducting a survey in the form of a questionnaire and conducting several further interviews. The results showed that using communication technology such as the Digital Platform can make it easier for sellers to market products and make it easier to interact with buyers. This research discusses that using communication technology such as the Digital Platform is one of the best business strategies. The conclusion obtained in this study is that the Digital Platform is the best solution to expand business networks and make it easier for sellers and buyers to make transactions. The benefit of doing this research is to find out the meaning and purpose of developing business communication by involving digital technology in marketing products or services.","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122102284","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
India's voting system plays an important role in Indian Democracy. The existing system is offline and has certain weaknesses. In recent years, the spread of covid19, inefficient rural voters, people far from their place of birth, paper waste affecting nature, budgets that should be used for development, invisible fraud, waste of human labor, have been recorded and can be avoided by the virtual voting system. The research aims to supply an easy and secure electoral system in India. The method used descriptive qualitative. The results indicate that a virtual voting system is environmentally friendly and is considered a resource-saving way for the election. It is because minimizes errors and increases voter participation through convenient virtual voting. In conclusion, a virtual voting system can develop an Aadhar based advanced Electronic Voting Machine (EVM), which helps in a free and fair way of conducting elections
{"title":"Virtual Voting System","authors":"Gaurav Kumar, Smriti Gupta, Divya Agarwal, Astha Tiwari","doi":"10.34010/injiiscom.v2i1.5416","DOIUrl":"https://doi.org/10.34010/injiiscom.v2i1.5416","url":null,"abstract":"India's voting system plays an important role in Indian Democracy. The existing system is offline and has certain weaknesses. In recent years, the spread of covid19, inefficient rural voters, people far from their place of birth, paper waste affecting nature, budgets that should be used for development, invisible fraud, waste of human labor, have been recorded and can be avoided by the virtual voting system. The research aims to supply an easy and secure electoral system in India. The method used descriptive qualitative. The results indicate that a virtual voting system is environmentally friendly and is considered a resource-saving way for the election. It is because minimizes errors and increases voter participation through convenient virtual voting. In conclusion, a virtual voting system can develop an Aadhar based advanced Electronic Voting Machine (EVM), which helps in a free and fair way of conducting elections","PeriodicalId":196635,"journal":{"name":"International Journal of Informatics, Information System and Computer Engineering (INJIISCOM)","volume":"8 5","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120931679","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：