Journal of Dentistry of Tehran University of Medical Sciences最新文献

Objectives: The aim of this study was to evaluate the clinical performance of a packable and a low shrinkage methacrylate-based composite after one year.

Materials and methods: In this clinical trial, 50 class I or II restorations were placed in 25 patients. Each patient received two restorations. The tested materials were: (I) Filtek P60 + Single Bond 2 and (II) Kalore GC + Single Bond 2. The restorations were evaluated by two independent examiners after one week (baseline), six months and one year according to the modified United States Public Health Service (USPHS) criteria. The evaluated parameters included color match, marginal adaptation, anatomical form, retention, surface texture, postoperative sensitivity, marginal staining and secondary caries. Data were then analyzed using Friedman and conditional (matched) logistic regression tests at P<0.05 level of significance.

Results: P60 and Kalore performed similarly at six months and one year (P>0.05). When each composite resin was evaluated independently at baseline and after one year, no statistically significant differences were found except for marginal adaptation (P60) where four restorations were rated Bravo (clinically acceptable). In 8% of restorations, patients expressed postoperative sensitivity.

Conclusions: Kalore GC and Filtek P60 showed acceptance clinical performance after one year of service.

Objectives: This study sought to compare the one-year clinical success of a hydrophilic and a hydrophobic fissure sealant in permanent first molars.

Materials and methods: This split-mouth clinical trial was conducted on 23 six to nine year olds who had four fully erupted sound first molars. Helioseal-F and Embrace sealants were randomly applied on the first molars, and follow-ups were scheduled at three, six and 12 months to examine the teeth according to USPHS criteria (retention, marginal adaptation, color match, surface smoothness and caries recurrence). The Wilcoxon signed rank test, the Friedman test and the Mann Whitney test were applied for statistical analyses (P<0.05).

Results: No significant differences were noted between Embrace and Helioseal-F in retention, smoothness of surface, marginal adaptation, color match or caries at three, six or 12 months (all P>0.05). In addition, the retention of sealants between the maxilla and mandible was not significantly different (P>0.05). Friedman test revealed no significant difference in any of the five parameters at different time points in any sealant group (P>0.05).

Conclusions: Embrace hydrophilic and Helioseal-F hydrophobic sealants have the same one-year clinical success rate.

Objectives: This study aimed to assess the effect of wet and dry finishing and polishing on microhardness and roughness of microhybrid and nanohybrid composites.

Materials and methods: Thirty samples were fabricated of each of the Polofil Supra and Aelite Aesthetic All-Purpose Body microhybrid and Grandio and Aelite Aesthetic Enamel nanohybrid composite resins. Each group (n=30) was divided into three subgroups of D, W and C (n=10). Finishing and polishing were performed dry in group D and under water coolant in group W. Group C served as the control group and did not receive finishing and polishing. Surface roughness of samples was measured by a profilometer and their hardness was measured by a Vickers hardness tester. Data were analyzed using two-way ANOVA (P<0.05).

Results: The smoothest surfaces with the lowest microhardness were obtained under Mylar strip without finishing/polishing for all composites (P<0.0001). The highest surface roughness was recorded for dry finishing/polishing for all composites (P<0.0001). Dry finishing/polishing increased the microhardness of all composites (P<0.0001).

Conclusions: Dry finishing and polishing increases the microhardness and surface roughness of microhybrid and nanohybrid composite resins.

The significance of clinician's knowledge about root canal anatomy and its possible variations cannot be overlooked. In some cases, taking advantage of complementary imaging techniques can help achieve a perfect flawless endodontic treatment. This article reports endodontic management of a second maxillary molar that had an uncommon anatomy of the chamber floor. After obtaining a cone-beam computed tomography (CBCT) image, the presence of a second palatal root was confirmed. All four roots were treated and patient's symptoms were resolved.

Lichen planus is a mucocutaneous disease, predominantly affecting the middle-aged individuals and may be associated with a plethora of signs and symptoms related to the skin, scalp, nails and mucous membranes. The definitive etiology of lichen planus is not yet known and no therapeutic modality has yet been universally accepted. Lichen planus in pediatric patients is a rare phenomenon and its presence in the oral mucosa is even rarer. The aim of this article is to present a rare case of a symptomatic oral lichen planus (OLP) occurring in a 12-year old child that was managed successfully with a novel sequential modality of topical retinoids followed by aloe vera gel application.

Objectives: Many advantages have been attributed to dental zirconia ceramics in terms of mechanical and physical properties; however, the bonding ability of this material to dental structure and/or veneering ceramics has always been a matter of concern. On the other hand, hydroxyapatite (HA) shows excellent biocompatibility and good bonding ability to tooth structure, with mechanically unstable and brittle characteristics, that make it clinically unacceptable for use in high stress bearing areas. The main purpose of this study was to introduce two simple yet practical methods to deposit the crystalline HA nanoparticles on zirconia ceramics.

Materials and methods: zirconia blocks were treated with HA via two different deposition methods namely thermal coating and air abrasion. Specimens were analyzed by scanning electron microscopy, energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD).

Results: In both groups, the deposition techniques used were successfully accomplished, while the substrate showed no structural change. However, thermal coating group showed a uniform deposition of crystalline HA but in air abrasion method, there were dispersed thin islands of HA.

Conclusions: Thermal coating method has the potential to significantly alter the surface characteristics of zirconia. The simple yet practical nature of the proposed method may be able to shift the bonding paradigm of dental zirconia ceramics. This latter subject needs to be addressed in future investigations.

Objectives: The aim of this study was to evaluate the effect of dentin remineralization using proanthocyanidin (PA), fluoride varnish and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) paste and their various combinations on microhardness of demineralized root dentin.

Materials and methods: One-hundred and twenty freshly extracted sound human premolars were selected and randomly divided into eight groups for dentin treatment as follows. C: Deionized water (control); PA: 6.5% PA solution; F: fluoride varnish (5% NaF, 22600 ppm fluoride); CP: CCP-ACP; PAF: 6.5% PA + fluoride varnish; PACP: 6.5% PA + CCP-ACP; FCP: fluoride varnish + CCP-ACP and PAFCP: 6.5% PA + fluoride varnish + CCP-ACP. All specimens were subjected to Vickers microhardness test (500 g, 10 seconds, 3 points). Data were analyzed using one-way ANOVA and Tukey's post hoc test. The significance level was set at 0.05.

Results: The mean and standard deviation (SD) values of Vickers hardness number (VHN) in groups C, PA, F, CP, PAF, PACP, FCP and PAFCP were 37.39±4.97, 38.68±4.62, 48.28±2.68, 41.91±3.32, 48.59±2.55, 53.34±2.57, 48.413±4.00 and 55.20±1.82, respectively. Pairwise comparisons of the groups revealed that there was no significant difference between groups C and PA, PA and CP, F and PAF, F and FCP, PAF and FCP, and PACP and FPACP (P>0.05); but significant differences were observed between other groups (P<0.05).

Conclusions: The results of this study showed that the tested dentin treatments increased the microhardness of demineralized root dentin except for PA application.

In completely edentulous patients, limited interarch distance can compromise conventional prosthetic fabrication. Bone reduction through various surgical procedures has been recommended to restore an acceptable interarch distance. In such circumstances, a surgical guide built on a mounted cast can be used to minimize and control the amount of bone reduction performed. In the present report, an innovative method of fabrication of surgical guide has been described.

Objectives: Mineral trioxide aggregate (MTA) is extensively used in endodontics. However, MTA is difficult to handle because of its granular consistency, low mechanical properties and initial looseness. The objective of this study was to assess the compressive strength (CS), diametral tensile strength (DTS), and pH of set MTA using methyl cellulose as liquid.

Materials and methods: White ProRoot MTA was used as the control group; modified MTA cement was prepared by mixing Portland cement, bismuth oxide and calcium sulfate (75%, 20% and 5%, respectively) as the experiment group. Methyl cellulose was used as hydrating liquid and compared with distilled water. The data were analyzed by two-way ANOVA.

Results: The pH values of modified MTA cement set using deionized water and methyl cellulose were slightly, but not significantly, different (P>0.05). The DTS and CS tests for modified MTA cement hydrated with methyl cellulose showed a significant difference at one day and one week (P<0.05).

Conclusions: The results suggest that using methyl cellulose as the hydrating liquid enhances some mechanical properties but does not compromise pH of white ProRoot MTA.

Objectives: This study aimed to assess the diagnostic value of conventional and digital radiography for detection of cavitated and non-cavitated proximal caries.

Materials and methods: Fifty extracted human premolars and molars were mounted in a silicone block. Charge-coupled device (CCD) and photostimulable phosphor plate (PSP) receptors and intra-oral films were exposed with 60 and 70 kVp with parallel technique. Two observers interpreted the radiographs twice with a two-week interval using a 5-point scale. Teeth were then serially sectioned in mesiodistal direction and evaluated under a stereomicroscope (gold standard). Sensitivity, specificity, positive predictive value, negative predictive value and accuracy were calculated.

Results: Sensitivity of all three receptors for detection of enamel lesions was low (5.5-44.4%) but it was higher for dentin lesions (42.8-62.8%); PSP with 70 kVp and 0.03s exposure time had the highest sensitivity for enamel lesions, but the difference among receptors was not statistically significant (P>0.05). Sensitivity of all three receptors for detection of non-cavitated lesions was lower than that for cavitated lesions; PSP with 60 kVp and 0.07s exposure time had higher sensitivity and lower patient radiation dose for detection of cavitated and non-cavitated lesions, but the difference was not significant (P>0.05).

Conclusions: Digital radiography using PSP receptor with 70 kVp is recommended to detect initial enamel caries. For detection of non-cavitated and cavitated dentin caries, PSP with 60 kVp is more appropriate. Change in kVp did not affect the diagnostic accuracy for detection of caries, and type of receptor was a more important factor.