Pub Date : 2024-03-10DOI: 10.20396/bjos.v23i00.8670338
Rinnu Mathew, Anuradha Bhatsange
Demineralized freeze-dried bone allograft (DFDBA) contains bone morphogenetic proteins (BMPs), hence is osteoinductive. Autologous platelet concentrates exhibit a higher quantity of growth factors. Both these biomaterials aid in bone regeneration when placed in three-wall intrabony defects. However, their efficacy when used alone and in conjugation is not clear. Aim: To assess clinical and radiographic efficacy of injectable platelet-rich fibrin (i-PRF) with microsurgical access flap in the treatment of three-wall intrabony defects in chronic periodontitis patients. Methods: Thirty sites with three-wall intrabony defects were randomly assigned to control and test group by computer generated method. The test group obtained i-PRF mixed with DFDBA while the control group received only DFDBA. Clinical parameters such as site-specific Plaque index (PI), Radiographic intrabony defect depth (IBDD), modified- Sulcular bleeding index (mSBI), Clinical attachment level (CAL), and Probing pocket depth (PPD) were measured at baseline, three and six months. Results: Intragroup comparison within the control group and test group exhibited statistically highly significant variation of mean PI, mSBI, PPD, CAL, and IBDD score from baseline to 3 months and from 3-6 months (p<0.001). However, intergroup comparison demonstrated no statistically significant variation of mean IBDD at all 3 intervals (p>0.05). Conclusion: i-PRF combined with DFDBA enhanced the radiographic and clinical parameters as opposed to DFDBA alone. The role of i-PRF is promising in its capacity for easy obtainability and increased potential to aid in regeneration.
{"title":"Demineralized freeze-dried bone allograft with/without i-Platelet-rich fibrin in 3 wall intrabony defects","authors":"Rinnu Mathew, Anuradha Bhatsange","doi":"10.20396/bjos.v23i00.8670338","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8670338","url":null,"abstract":"Demineralized freeze-dried bone allograft (DFDBA) contains bone morphogenetic proteins (BMPs), hence is osteoinductive. Autologous platelet concentrates exhibit a higher quantity of growth factors. Both these biomaterials aid in bone regeneration when placed in three-wall intrabony defects. However, their efficacy when used alone and in conjugation is not clear. Aim: To assess clinical and radiographic efficacy of injectable platelet-rich fibrin (i-PRF) with microsurgical access flap in the treatment of three-wall intrabony defects in chronic periodontitis patients. Methods: Thirty sites with three-wall intrabony defects were randomly assigned to control and test group by computer generated method. The test group obtained i-PRF mixed with DFDBA while the control group received only DFDBA. Clinical parameters such as site-specific Plaque index (PI), Radiographic intrabony defect depth (IBDD), modified- Sulcular bleeding index (mSBI), Clinical attachment level (CAL), and Probing pocket depth (PPD) were measured at baseline, three and six months. Results: Intragroup comparison within the control group and test group exhibited statistically highly significant variation of mean PI, mSBI, PPD, CAL, and IBDD score from baseline to 3 months and from 3-6 months (p<0.001). However, intergroup comparison demonstrated no statistically significant variation of mean IBDD at all 3 intervals (p>0.05). Conclusion: i-PRF combined with DFDBA enhanced the radiographic and clinical parameters as opposed to DFDBA alone. The role of i-PRF is promising in its capacity for easy obtainability and increased potential to aid in regeneration.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"12 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140255057","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-10DOI: 10.20396/bjos.v23i00.8670401
A. C. Kovalik, Alessandra Carla Sousa Girardi, Naiara Vendrami, Fabio André dos Santos
Aim: This study aimed to evaluate the millimeter distances and active tip diameters of different periodontal probes. Methods: Two types of periodontal probes were analyzed (North Carolina (15-UNC) and PCP-12). Two manufacturers were selected for each probe type. Digital images of the probes were obtained and the distances were measured using a software program. The diameter of the active tip was measured using a digital caliper. Both variables were measured by two trained and calibrated examiners. The data were analyzed using the Bland-Altman method and two-way ANOVA with Tukey’s post-hoc test. Statistical significance was set at p<0.05. Results: A comparison of measurements between the 15UNC and PCP-12 probes showed a significant difference in all millimeter markings. The 15-UNC probe showed differences between the 3 and 12 mm markings. The PCP-12 probe only showed differences between the marks at the 12 mm mark. The 15-UNC probe had a similar active tip diameter between the two manufacturers. The PCP-12 probe showed a significant difference between the two manufacturers. Both types of probes had similar active tip diameters when compared by the two manufacturers. Conclusion: There was no standardization in relation to millimeter marks and tip diameters of the two types of periodontal probes produced by the two different manufacturers. The probe types exhibited little variability.
{"title":"Evaluation of characteristics of periodontal probes","authors":"A. C. Kovalik, Alessandra Carla Sousa Girardi, Naiara Vendrami, Fabio André dos Santos","doi":"10.20396/bjos.v23i00.8670401","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8670401","url":null,"abstract":"Aim: This study aimed to evaluate the millimeter distances and active tip diameters of different periodontal probes. Methods: Two types of periodontal probes were analyzed (North Carolina (15-UNC) and PCP-12). Two manufacturers were selected for each probe type. Digital images of the probes were obtained and the distances were measured using a software program. The diameter of the active tip was measured using a digital caliper. Both variables were measured by two trained and calibrated examiners. The data were analyzed using the Bland-Altman method and two-way ANOVA with Tukey’s post-hoc test. Statistical significance was set at p<0.05. Results: A comparison of measurements between the 15UNC and PCP-12 probes showed a significant difference in all millimeter markings. The 15-UNC probe showed differences between the 3 and 12 mm markings. The PCP-12 probe only showed differences between the marks at the 12 mm mark. The 15-UNC probe had a similar active tip diameter between the two manufacturers. The PCP-12 probe showed a significant difference between the two manufacturers. Both types of probes had similar active tip diameters when compared by the two manufacturers. Conclusion: There was no standardization in relation to millimeter marks and tip diameters of the two types of periodontal probes produced by the two different manufacturers. The probe types exhibited little variability.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"68 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140254862","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-10DOI: 10.20396/bjos.v23i00.8670869
João Vitor Andrade Denadai, R. Zimmer, E. Reston, G. Arossi
Aim: The aim of this study was to verify the color variation between different composite resins and the Vita Classical Shade Guide. Methods: Two-millimeter thickness samples were made (n = 6) from eight commercial brands of composite resin (shade A2): Charisma (Kulzer), Forma (Ultradent), Harmonize (Kerr), Luna (SDI), Opallis (FGM), Oppus Bulk Fill (FGM), Vittra (FGM) and Filtek Z250 XT (3M ESPE). Specimens were stored in distilled water for 7 days and then polished. Color measurements of samples and A2 shade of the Vita Classical Shade Guide were performed using the Vita Easy Shade Advance 4.0 spectrophotometer on a black background. Color variations were calculated using the CIEDE2000 formula, considering values ≥0.81 being noticeable by the human eye and ≥1.77 being clinically unacceptable. Results were statistically analyzed with a 5% significance level. Results: Color variation (ΔE) of composite (E1 ) compared to the Vita Classical Shade Guide (E0 ) was greater than clinically acceptable for all the materials evaluated in this study. Forma (ΔE=2.08 ± sd=0.47) and Filtek Z250 XT (2.50 ± 0.20) had the smallest amount of color variation values found in the results. Harmonize (3.32 ± 0.63) presented values similar to Filtek Z250 XT, but it was worse than Forma. Vittra (3.51 ± 0.28), Charisma (3.80 ± 0.20), Opallis (4.24 ± 0.30) and Luna (5.67 ± 0.20) did not differ among each other and presented higher color variation than Forma, Filtek Z350XT and Harmonize. Oppus Bulk Fill (13.94 ± 1.12) was the composite with the greatest color variation. Conclusions: The findings in this study show that attention should be taken when using the Vita Color Shade Guide for composite shade selection.
{"title":"Color variation of composite resins in relation to the Vita Classical shade guide","authors":"João Vitor Andrade Denadai, R. Zimmer, E. Reston, G. Arossi","doi":"10.20396/bjos.v23i00.8670869","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8670869","url":null,"abstract":"Aim: The aim of this study was to verify the color variation between different composite resins and the Vita Classical Shade Guide. Methods: Two-millimeter thickness samples were made (n = 6) from eight commercial brands of composite resin (shade A2): Charisma (Kulzer), Forma (Ultradent), Harmonize (Kerr), Luna (SDI), Opallis (FGM), Oppus Bulk Fill (FGM), Vittra (FGM) and Filtek Z250 XT (3M ESPE). Specimens were stored in distilled water for 7 days and then polished. Color measurements of samples and A2 shade of the Vita Classical Shade Guide were performed using the Vita Easy Shade Advance 4.0 spectrophotometer on a black background. Color variations were calculated using the CIEDE2000 formula, considering values ≥0.81 being noticeable by the human eye and ≥1.77 being clinically unacceptable. Results were statistically analyzed with a 5% significance level. Results: Color variation (ΔE) of composite (E1 ) compared to the Vita Classical Shade Guide (E0 ) was greater than clinically acceptable for all the materials evaluated in this study. Forma (ΔE=2.08 ± sd=0.47) and Filtek Z250 XT (2.50 ± 0.20) had the smallest amount of color variation values found in the results. Harmonize (3.32 ± 0.63) presented values similar to Filtek Z250 XT, but it was worse than Forma. Vittra (3.51 ± 0.28), Charisma (3.80 ± 0.20), Opallis (4.24 ± 0.30) and Luna (5.67 ± 0.20) did not differ among each other and presented higher color variation than Forma, Filtek Z350XT and Harmonize. Oppus Bulk Fill (13.94 ± 1.12) was the composite with the greatest color variation. Conclusions: The findings in this study show that attention should be taken when using the Vita Color Shade Guide for composite shade selection.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"12 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140255345","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-05DOI: 10.20396/bjos.v23i00.8673318
Solange Schroeder Corrêa, P. Martinello, D. E. Carneiro, Alfonso Sánchez-Ayala, N. H. Campanha
Aim: This study aimed to investigate the relationship between self-perceived oral health and the prosthetic status of individuals who seek care in prosthodontics clinics. Methods: Self-perceived oral health was analyzed through the Geriatric Oral Health Assessment Index (GOHAI). Abutment tooth mobility was assessed, and denture status was determined by clinical assessment of stability, retention, occlusal balance, vertical dimension, and integrity of dentures. The frequency of individuals in each variable was determined for the low and very low GOHAI conditions. Chi-square, Pearson, and stepwise logistic regression tests were used for the statistical analyses (α = 0.05). Results: Ninety wearers of removable dentures with a mean age of 55.1±9.1 years were evaluated. None of the variables was related to GOHAI values (p > 0.05). The regression analysis showed that age predicts (p = 0.006) the variation of GOHAI conditions (OR = 0.924, CI = 0.873- 0.978), showing only 7.6% protective effect against very low GOHAI. Unsatisfactory stability showed the opposite effect (p = 0.034) and the individuals with this characteristic are more likely (OR = 3.055) to have very low GOHAI scores (CI = 1.085- 8.602). Conclusions: The self-perceived oral health of wearers of removable dentures worsens with age and unsatisfactory stability of dentures.
{"title":"Self-perceived oral health","authors":"Solange Schroeder Corrêa, P. Martinello, D. E. Carneiro, Alfonso Sánchez-Ayala, N. H. Campanha","doi":"10.20396/bjos.v23i00.8673318","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8673318","url":null,"abstract":"Aim: This study aimed to investigate the relationship between self-perceived oral health and the prosthetic status of individuals who seek care in prosthodontics clinics. Methods: Self-perceived oral health was analyzed through the Geriatric Oral Health Assessment Index (GOHAI). Abutment tooth mobility was assessed, and denture status was determined by clinical assessment of stability, retention, occlusal balance, vertical dimension, and integrity of dentures. The frequency of individuals in each variable was determined for the low and very low GOHAI conditions. Chi-square, Pearson, and stepwise logistic regression tests were used for the statistical analyses (α = 0.05). Results: Ninety wearers of removable dentures with a mean age of 55.1±9.1 years were evaluated. None of the variables was related to GOHAI values (p > 0.05). The regression analysis showed that age predicts (p = 0.006) the variation of GOHAI conditions (OR = 0.924, CI = 0.873- 0.978), showing only 7.6% protective effect against very low GOHAI. Unsatisfactory stability showed the opposite effect (p = 0.034) and the individuals with this characteristic are more likely (OR = 3.055) to have very low GOHAI scores (CI = 1.085- 8.602). Conclusions: The self-perceived oral health of wearers of removable dentures worsens with age and unsatisfactory stability of dentures.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"15 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140263936","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-03-04DOI: 10.20396/bjos.v23i00.8671300
Ana Elizabeth Ramírez-López, A. Asmat-Abanto
Aim: Burnout syndrome describes the state of long-term physical, emotional and mental exhaustion related to work. This syndrome can cause health problems related to stress, insomnia, cardiovascular and musculoskeletal diseases, including an increase in alcohol consumption and drug use. It is important to recognize the presence of the initial signs of this syndrome, therefore this study aimed to determine the prevalence of the burnout syndrome in peruvian dental students. Methods: The study was observational, cross-sectional, and descriptive. It was carried out from September to November 2018, and it included a total of 154 dental students of four universities of La Libertad region, surveyed by census method. Three were private universities and one was public. Burnout was evaluated through the Maslach Burnout Student Survey Questionnaire (MBI-SS). The results were presented in absolute and percentage frequencies, as well as confidence intervals, using double-entry tables. Results: It was found that 24.68% of the students (24.71% in male students and 24.64% in female students) presented burnout syndrome. The public university of Trujillo presented the highest percentage of affected students (47.37%). A prevalence of 53,90% of emotional exhaustion was also found among the students under evaluation. Conclusions: Almost a quarter of the students surveyed presented burnout. It was also observed that the public University of Trujillo had a higher percentage of burnout than the three private ones. The percentage of prevalence of the burnout syndrome according to sex was similar. However according to dimensions, emotional exhaustion presented the highest percentage.
{"title":"Burnout syndrome in peruvian dental students","authors":"Ana Elizabeth Ramírez-López, A. Asmat-Abanto","doi":"10.20396/bjos.v23i00.8671300","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8671300","url":null,"abstract":"Aim: Burnout syndrome describes the state of long-term physical, emotional and mental exhaustion related to work. This syndrome can cause health problems related to stress, insomnia, cardiovascular and musculoskeletal diseases, including an increase in alcohol consumption and drug use. It is important to recognize the presence of the initial signs of this syndrome, therefore this study aimed to determine the prevalence of the burnout syndrome in peruvian dental students. Methods: The study was observational, cross-sectional, and descriptive. It was carried out from September to November 2018, and it included a total of 154 dental students of four universities of La Libertad region, surveyed by census method. Three were private universities and one was public. Burnout was evaluated through the Maslach Burnout Student Survey Questionnaire (MBI-SS). The results were presented in absolute and percentage frequencies, as well as confidence intervals, using double-entry tables. Results: It was found that 24.68% of the students (24.71% in male students and 24.64% in female students) presented burnout syndrome. The public university of Trujillo presented the highest percentage of affected students (47.37%). A prevalence of 53,90% of emotional exhaustion was also found among the students under evaluation. Conclusions: Almost a quarter of the students surveyed presented burnout. It was also observed that the public University of Trujillo had a higher percentage of burnout than the three private ones. The percentage of prevalence of the burnout syndrome according to sex was similar. However according to dimensions, emotional exhaustion presented the highest percentage.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"115 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140265427","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.20396/bjos.v23i00.8670950
Carolina Chaves Pinto, Leonardo André Lins da Silva, C. A. A. Licurci, Antonio Canabarro
Aim: The aim of this in vitro study was to compare machine and manual cementation of prosthetic elements by measuring internal and marginal fits. Methods: Eighteen anatomic prefabricated abutments were used to manufacture zirconia copings in the Ceramill (n=9) and Lava systems (n=9). The copings were cemented with a fluid consistency addition silicone using a machine (n=18) and manually (n=18) according to the replica technique. They were then cut in the buccal-palatal and mesial-distal directions. The film thickness was photographed using an optical microscope and measured in the internal and marginal regions. The data collected were analyzed by repeated measures ANOVA and Bonferroni’s multiple comparison test (∂=.05). The Bland-Altman test was performed to evaluate the agreement between the methods. Results: In the evaluation of the internal and marginal misfits, the mean values observed for the cementation performed with the aid of a machine and manually, were as follows: angular regions, 76.7 μm and 76.2 μm; linear regions, 60.6 μm and 60.7 μm; incisal region, 144.8 μm and 145.2 μm; marginal region, 40.1 μm and 40.2 μm; and overall mean, 80.4 μm and 80.6 μm, respectively. No significant differences were found between the 2 methods, for any of regions and systems (P>.05). The Bland-Altman test showed agreement between the methods (P>.05) and that the limits of agreement found were clinically acceptable. Conclusions: Within the limitations of this in vitro study, we can conclude that cementation using manual techniques or mechanical aid produces the same cement films.
{"title":"Effect of clinical and laboratory techniques of cementation on the assessment of marginal and internal fit of prosthetic elements","authors":"Carolina Chaves Pinto, Leonardo André Lins da Silva, C. A. A. Licurci, Antonio Canabarro","doi":"10.20396/bjos.v23i00.8670950","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8670950","url":null,"abstract":"Aim: The aim of this in vitro study was to compare machine and manual cementation of prosthetic elements by measuring internal and marginal fits. Methods: Eighteen anatomic prefabricated abutments were used to manufacture zirconia copings in the Ceramill (n=9) and Lava systems (n=9). The copings were cemented with a fluid consistency addition silicone using a machine (n=18) and manually (n=18) according to the replica technique. They were then cut in the buccal-palatal and mesial-distal directions. The film thickness was photographed using an optical microscope and measured in the internal and marginal regions. The data collected were analyzed by repeated measures ANOVA and Bonferroni’s multiple comparison test (∂=.05). The Bland-Altman test was performed to evaluate the agreement between the methods. Results: In the evaluation of the internal and marginal misfits, the mean values observed for the cementation performed with the aid of a machine and manually, were as follows: angular regions, 76.7 μm and 76.2 μm; linear regions, 60.6 μm and 60.7 μm; incisal region, 144.8 μm and 145.2 μm; marginal region, 40.1 μm and 40.2 μm; and overall mean, 80.4 μm and 80.6 μm, respectively. No significant differences were found between the 2 methods, for any of regions and systems (P>.05). The Bland-Altman test showed agreement between the methods (P>.05) and that the limits of agreement found were clinically acceptable. Conclusions: Within the limitations of this in vitro study, we can conclude that cementation using manual techniques or mechanical aid produces the same cement films.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"7 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140488515","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.20396/bjos.v23i00.8666798
Ana Waleska Pessôa Barros de Aguiar, L. N. Lins, Ana Luíza Fassizoli da Fonte, Raylane Farias de Albuquerque, J. Leão, Igor Henrique Morais Silva
Aim: Hyposalivation and dry mouth affect the quality of life in patients with Head and Neck Cancer, who did the treatment with radiotherapy. Thus this study has the objective to evaluate the dosimetric relationship between 3D radiotherapy and changes in salivary flow, xerostomia and quality of life in patients with head and neck cancer according to the volume of the irradiated parotid gland. Methods: 23 patients with cancer in the head and neck area and in need of 3D radiotherapy were followed up during radiotherapy treatment, and the parotid gland (PG) design was also performed in radiotherapy planning. Questionnaires were carried out to determine xerostomia and quality of life, while the salivary flow was determined through calculations regarding the collection and weighing of saliva. Such data were collected in three moments: before the beginning of the radiotherapy treatment (D0), in the middle of the treatment (D1) and at the end of it (D2). The numerical variables are represented by measures of central tendency and measures of dispersion. Results: when associating the salivary flow, the xerostomia questionnaire and the OHIP-14, a statistically significant difference was found (p-value <0.001), as well as when comparing some volumes of irradiated PG with the OHIP-14. However, no relationship was found between dosimetric data, xerostomia and hyposalivation. Conclusion: patients undergoing 3D radiotherapy for malignant neoplasms in the head and neck region had decreased salivary flow, increased complaints of dry mouth and decreased quality of life. However, it was not possible to establish a statistically significant correlation between these findings and the volumes of irradiated parotids.
{"title":"3D radiotherapy in the parotid gland and its dosimetric relationship with salivary flow and quality of life in patients with head and neck cancer","authors":"Ana Waleska Pessôa Barros de Aguiar, L. N. Lins, Ana Luíza Fassizoli da Fonte, Raylane Farias de Albuquerque, J. Leão, Igor Henrique Morais Silva","doi":"10.20396/bjos.v23i00.8666798","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8666798","url":null,"abstract":"Aim: Hyposalivation and dry mouth affect the quality of life in patients with Head and Neck Cancer, who did the treatment with radiotherapy. Thus this study has the objective to evaluate the dosimetric relationship between 3D radiotherapy and changes in salivary flow, xerostomia and quality of life in patients with head and neck cancer according to the volume of the irradiated parotid gland. Methods: 23 patients with cancer in the head and neck area and in need of 3D radiotherapy were followed up during radiotherapy treatment, and the parotid gland (PG) design was also performed in radiotherapy planning. Questionnaires were carried out to determine xerostomia and quality of life, while the salivary flow was determined through calculations regarding the collection and weighing of saliva. Such data were collected in three moments: before the beginning of the radiotherapy treatment (D0), in the middle of the treatment (D1) and at the end of it (D2). The numerical variables are represented by measures of central tendency and measures of dispersion. Results: when associating the salivary flow, the xerostomia questionnaire and the OHIP-14, a statistically significant difference was found (p-value <0.001), as well as when comparing some volumes of irradiated PG with the OHIP-14. However, no relationship was found between dosimetric data, xerostomia and hyposalivation. Conclusion: patients undergoing 3D radiotherapy for malignant neoplasms in the head and neck region had decreased salivary flow, increased complaints of dry mouth and decreased quality of life. However, it was not possible to establish a statistically significant correlation between these findings and the volumes of irradiated parotids.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"12 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140488375","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Aim: Cyclooxygenase enzymes (COX) catalyze the conversion of arachidonic acid to prostaglandins and thromboxanes during pain and inflammation conditions. These enzymes have also been linked to several other conditions and diseases, and hence, in dentistry, it is crucial to identify the processes that increase the levels of these mediators. This paper aims to describe the significance of COX in dental practice through a narrative review. Methods: Articles relating to COX upregulation published in English and Spanish over the last 51 years in databases such as EBSCO, Google Scholar, Science Direct, PubMed, and Web of Science; were analyzed. Results: A total of 115 articles demonstrating the relationship between COX upregulation and multiple conditions and diseases of importance in prosthodontics, periodontics, oral pathology, orthodontics, and endodontics were included. Conclusions: COX upregulation is related to inflammatory and malignant diseases in oral tissues, such as periodontitis, pulpitis, and oral cancer, nevertheless, its expression is advantageous in other fields of study such as orthodontics. Additionally, is well documented that dental materials provoke an undesired increase in COX expression, which could be a significant factor that directly affects pulpal health.
{"title":"The importance of cyclooxigenase in dentistry","authors":"Sara Delgadillo Barrera, Lilia Jadith Bernal Cepeda, Jaime Eduardo Castellanos Parras","doi":"10.20396/bjos.v23i00.8671181","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8671181","url":null,"abstract":"Aim: Cyclooxygenase enzymes (COX) catalyze the conversion of arachidonic acid to prostaglandins and thromboxanes during pain and inflammation conditions. These enzymes have also been linked to several other conditions and diseases, and hence, in dentistry, it is crucial to identify the processes that increase the levels of these mediators. This paper aims to describe the significance of COX in dental practice through a narrative review. Methods: Articles relating to COX upregulation published in English and Spanish over the last 51 years in databases such as EBSCO, Google Scholar, Science Direct, PubMed, and Web of Science; were analyzed. Results: A total of 115 articles demonstrating the relationship between COX upregulation and multiple conditions and diseases of importance in prosthodontics, periodontics, oral pathology, orthodontics, and endodontics were included. Conclusions: COX upregulation is related to inflammatory and malignant diseases in oral tissues, such as periodontitis, pulpitis, and oral cancer, nevertheless, its expression is advantageous in other fields of study such as orthodontics. Additionally, is well documented that dental materials provoke an undesired increase in COX expression, which could be a significant factor that directly affects pulpal health.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"66 15","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140486223","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-29DOI: 10.20396/bjos.v23i00.8671965
Bhárbara Mariano Barcellos, Andressa Goicochea Moreira, Isabela Toledo Teixeira da Silveira, Eduardo de Freitas Gomes, Cristina Braga Xavier, O. C. Chagas Júnior
Aim: This study aims to report the perioperative management of a patient with von Willebrand disease (vWd) who underwent orthognathic surgery. The report follows the guidelines of the Case Report Guidelines (CARE) and focuses on the steps taken to prevent bleeding during the surgical procedure. Methods: A 39-year-old female patient with skeletal Class III was treated with maxillary advancement and mandibular setback. Despite normal test results for ristocetin cofactor activity, measures were taken to prevent bleeding, including atraumatic surgical techniques, use of antifibrinolytic medication, induced hypotension during anesthesia, and preparation of blood products for transfusion during trans and postoperative periods if needed. In the end, these measures were not required. Results: The patient did not experience any bleeding during the surgical procedure or postoperative period, demonstrating the effectiveness of the measures taken to manage their blood dyscrasia. Two years after the surgery, the patient had satisfactory aesthetic and functional results and no evidence of relapse. Conclusion: Thus, this case report demonstrates that vWd does not prevent largescale oral and maxillofacial surgeries such as orthognathic surgery as long as proper precautions are taken pre-, intraand postoperatively.
{"title":"Orthognathic surgery in a patient with von Willebrand disease","authors":"Bhárbara Mariano Barcellos, Andressa Goicochea Moreira, Isabela Toledo Teixeira da Silveira, Eduardo de Freitas Gomes, Cristina Braga Xavier, O. C. Chagas Júnior","doi":"10.20396/bjos.v23i00.8671965","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8671965","url":null,"abstract":"Aim: This study aims to report the perioperative management of a patient with von Willebrand disease (vWd) who underwent orthognathic surgery. The report follows the guidelines of the Case Report Guidelines (CARE) and focuses on the steps taken to prevent bleeding during the surgical procedure. Methods: A 39-year-old female patient with skeletal Class III was treated with maxillary advancement and mandibular setback. Despite normal test results for ristocetin cofactor activity, measures were taken to prevent bleeding, including atraumatic surgical techniques, use of antifibrinolytic medication, induced hypotension during anesthesia, and preparation of blood products for transfusion during trans and postoperative periods if needed. In the end, these measures were not required. Results: The patient did not experience any bleeding during the surgical procedure or postoperative period, demonstrating the effectiveness of the measures taken to manage their blood dyscrasia. Two years after the surgery, the patient had satisfactory aesthetic and functional results and no evidence of relapse. Conclusion: Thus, this case report demonstrates that vWd does not prevent largescale oral and maxillofacial surgeries such as orthognathic surgery as long as proper precautions are taken pre-, intraand postoperatively.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"59 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140485806","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2024-01-14DOI: 10.20396/bjos.v23i00.8673158
Afaf A Almabadi
Aim: In recent years, great advances have been made in the use of CAD/CAM to prepare fixed restorations. The marginal and internal fit of these restorations is a principal determinant for their clinical success. In addition, the nature of the oral environment affects the mechanical properties of these restorations. Therefore, this study aimed to investigate the effect of aging process under conditions that simulate the oral environment on the marginal adaptation, and, fracture resistance of crowns fabricated from polyether ether ketone (PEEK) using CAD/CAM methods. Methods: Twenty identical crown restorations were fabricated by using CAD/CAM methods to mill polyether ether ketone (PEEK) material. These crowns were produced by using a software design of an epoxy resin replica of the prepared maxillary first premolar tooth. All PEEK crowns were cemented and randomly divided into two equal groups (A, B). Each group was divided into subgroups (A1, A2 and B1, B2). Group A1 and A2 were used to measure marginal adaptation and fracture resistance, respectively, before aging, while group (B1 and B2) were measured after aging. The cemented crowns were mounted in resin molds to facilitate the sectioning process. The measurements of the marginal gap were performed after sectioning at four points using a stereomicroscope. The fracture resistance of the crowns was investigated using a universal testing machine. A statistical analysis was performed using the GraphPad Prism® software version and unpaired Student’s t-test. Results: The results revealed that aging affected the marginal gap, and the fracture resistance of the PEEK crowns. While aging, negatively affected the conditions under investigation, however the least significant difference of marginal gap was found in the margin region. Conclusions: PEEK-CAD/CAM is considered as a good alternative prosthodontic material for fixed prostheses. The CAD/CAM technique used to make PEEK crown restorations in our study offers the advantages of high marginal accuracy and fracture resistance for long-term performance in the oral environment.
{"title":"The effect of aging on the accuracy of marginal adaptation and fracture resistance of CAD/CAM PEEK single crown restoration","authors":"Afaf A Almabadi","doi":"10.20396/bjos.v23i00.8673158","DOIUrl":"https://doi.org/10.20396/bjos.v23i00.8673158","url":null,"abstract":"Aim: In recent years, great advances have been made in the use of CAD/CAM to prepare fixed restorations. The marginal and internal fit of these restorations is a principal determinant for their clinical success. In addition, the nature of the oral environment affects the mechanical properties of these restorations. Therefore, this study aimed to investigate the effect of aging process under conditions that simulate the oral environment on the marginal adaptation, and, fracture resistance of crowns fabricated from polyether ether ketone (PEEK) using CAD/CAM methods. Methods: Twenty identical crown restorations were fabricated by using CAD/CAM methods to mill polyether ether ketone (PEEK) material. These crowns were produced by using a software design of an epoxy resin replica of the prepared maxillary first premolar tooth. All PEEK crowns were cemented and randomly divided into two equal groups (A, B). Each group was divided into subgroups (A1, A2 and B1, B2). Group A1 and A2 were used to measure marginal adaptation and fracture resistance, respectively, before aging, while group (B1 and B2) were measured after aging. The cemented crowns were mounted in resin molds to facilitate the sectioning process. The measurements of the marginal gap were performed after sectioning at four points using a stereomicroscope. The fracture resistance of the crowns was investigated using a universal testing machine. A statistical analysis was performed using the GraphPad Prism® software version and unpaired Student’s t-test. Results: The results revealed that aging affected the marginal gap, and the fracture resistance of the PEEK crowns. While aging, negatively affected the conditions under investigation, however the least significant difference of marginal gap was found in the margin region. Conclusions: PEEK-CAD/CAM is considered as a good alternative prosthodontic material for fixed prostheses. The CAD/CAM technique used to make PEEK crown restorations in our study offers the advantages of high marginal accuracy and fracture resistance for long-term performance in the oral environment.","PeriodicalId":34984,"journal":{"name":"Brazilian Journal of Oral Sciences","volume":"37 6","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"140508733","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：