Lennart Noordermeer, Hans Ole Ørka, Terje Gobakken
Stem frequency distributions provide useful information for pre-harvest planning. We compared four inventory approaches for imputing stem frequency distributions using harvester data as reference data and predictor variables computed from airborne laser scanner (ALS) data. We imputed distributions and stand mean values of stem diameter, tree height, volume, and sawn wood volume using the k-nearest neighbor technique. We compared the inventory approaches: (1) individual tree crown (ITC), semi-ITC, area-based (ABA) and enhanced ABA (EABA). We assessed the accuracies of imputed distributions using a variant of the Reynold’s error index, obtaining the best mean accuracies of 0.13, 0.13, 0.10 and 0.10 for distributions of stem diameter, tree height, volume and sawn wood volume, respectively. Accuracies obtained using the semi-ITC, ABA and EABA inventory approaches were significantly better than accuracies obtained using the ITC approach. The forest attribute, inventory approach, stand size and the laser pulse density had significant effects on the accuracies of imputed frequency distributions, however the ALS delay and percentage of deciduous trees did not. This study highlights the utility of harvester and ALS data for imputing stem frequency distributions in pre-harvest inventories.
{"title":"Imputing stem frequency distributions using harvester and airborne laser scanner data: a comparison of inventory approaches","authors":"Lennart Noordermeer, Hans Ole Ørka, Terje Gobakken","doi":"10.14214/sf.23023","DOIUrl":"https://doi.org/10.14214/sf.23023","url":null,"abstract":"Stem frequency distributions provide useful information for pre-harvest planning. We compared four inventory approaches for imputing stem frequency distributions using harvester data as reference data and predictor variables computed from airborne laser scanner (ALS) data. We imputed distributions and stand mean values of stem diameter, tree height, volume, and sawn wood volume using the k-nearest neighbor technique. We compared the inventory approaches: (1) individual tree crown (ITC), semi-ITC, area-based (ABA) and enhanced ABA (EABA). We assessed the accuracies of imputed distributions using a variant of the Reynold’s error index, obtaining the best mean accuracies of 0.13, 0.13, 0.10 and 0.10 for distributions of stem diameter, tree height, volume and sawn wood volume, respectively. Accuracies obtained using the semi-ITC, ABA and EABA inventory approaches were significantly better than accuracies obtained using the ITC approach. The forest attribute, inventory approach, stand size and the laser pulse density had significant effects on the accuracies of imputed frequency distributions, however the ALS delay and percentage of deciduous trees did not. This study highlights the utility of harvester and ALS data for imputing stem frequency distributions in pre-harvest inventories.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"106 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136205088","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Back Tomas Ersson, Linnea Hansson, Jussi Manner, Per Sandström, Johan Sonesson
Today, conflicts often occur in northern Fennoscandia (also known as Sápmi) between forestry and reindeer husbandry. Continuous cover forestry (CCF) is requested by both reindeer herding communities and the general public and is becoming more common, but the forest industry criticizes CCF for lower wood production. Mechanical site preparation (MSP) increases regeneration success and, thus, increases wood production in CCF. To reduce the conflict between forestry and reindeer husbandry, MSP in Sápmi should destroy as little ground lichen as possible. Today, there are no solutions for gentle and lichen-adapted MSP in CCF. Thus, there is a strong need to develop and test new technical solutions that increase regeneration success in a lichen-adapted way during CCF in Sápmi. We suggest that MSP solutions be developed which are gentle, work selectively and function in shelterwoods, gap cuts, and selection cutting stands. We envision that these solutions could fill the gap between the desired adaptivity on the part of the reindeer herding communities and the desired efficiency on the part of the forest industry. Such MSP technology would contribute to increased acceptance of CCF in the forest industry, higher biodiversity, and considerably reduce the conflict between forestry and reindeer herding communities.
{"title":"Forest management in northern Fennoscandia: the need for solutions that mitigate conflicts during forest regeneration and increase the use of continuous cover forestry","authors":"Back Tomas Ersson, Linnea Hansson, Jussi Manner, Per Sandström, Johan Sonesson","doi":"10.14214/sf.23053","DOIUrl":"https://doi.org/10.14214/sf.23053","url":null,"abstract":"Today, conflicts often occur in northern Fennoscandia (also known as Sápmi) between forestry and reindeer husbandry. Continuous cover forestry (CCF) is requested by both reindeer herding communities and the general public and is becoming more common, but the forest industry criticizes CCF for lower wood production. Mechanical site preparation (MSP) increases regeneration success and, thus, increases wood production in CCF. To reduce the conflict between forestry and reindeer husbandry, MSP in Sápmi should destroy as little ground lichen as possible. Today, there are no solutions for gentle and lichen-adapted MSP in CCF. Thus, there is a strong need to develop and test new technical solutions that increase regeneration success in a lichen-adapted way during CCF in Sápmi. We suggest that MSP solutions be developed which are gentle, work selectively and function in shelterwoods, gap cuts, and selection cutting stands. We envision that these solutions could fill the gap between the desired adaptivity on the part of the reindeer herding communities and the desired efficiency on the part of the forest industry. Such MSP technology would contribute to increased acceptance of CCF in the forest industry, higher biodiversity, and considerably reduce the conflict between forestry and reindeer herding communities.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135260926","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Adapting to site conditions is a central part of forest regeneration and can be done through selection of different planting positions. Requirements are tree species specific, and the use of soil moisture maps could be a way to support decision making in forest regeneration planning. At two experimental sites with varying soil moisture conditions in southern Sweden Norway spruce (Picea abies (L.) Karst.), Scots pine (Pinus sylvestris L.), and silver birch (Betula pendula Roth) seedlings were planted in four different planting positions following mounding site preparation; Depression, Hinge, Mound and Unscarified. Soil moisture estimates were obtained from a high-resolution depth-to-water raster for each planting spot. The effect of soil moisture, planting position and their interactions on mortality, height and diameter was evaluated for each tree species. In wet conditions mounds proved to be the best option to minimize seedling mortality for conifers, but with decreasing soil moisture, differences between the planting positions decreased. Birch on the other hand had the greatest survival in the hinge. The coniferous species displayed increased height and diameter when planted in mounds independent of the soil moisture conditions, whereas silver birch was less dependent on a specific planting position. Results from this study shows that a soil moisture map can explain mortality, height and diameter and thus can be a useful tool when choosing planting position in different soil moisture conditions.
{"title":"Within-site adaptation: Growth and mortality of Norway spruce, Scots pine and Silver birch seedlings in different planting positions across a soil moisture gradient","authors":"Per Nordin, Erika Olofsson, Karin Hjelm","doi":"10.14214/sf.23004","DOIUrl":"https://doi.org/10.14214/sf.23004","url":null,"abstract":"Adapting to site conditions is a central part of forest regeneration and can be done through selection of different planting positions. Requirements are tree species specific, and the use of soil moisture maps could be a way to support decision making in forest regeneration planning. At two experimental sites with varying soil moisture conditions in southern Sweden Norway spruce (Picea abies (L.) Karst.), Scots pine (Pinus sylvestris L.), and silver birch (Betula pendula Roth) seedlings were planted in four different planting positions following mounding site preparation; Depression, Hinge, Mound and Unscarified. Soil moisture estimates were obtained from a high-resolution depth-to-water raster for each planting spot. The effect of soil moisture, planting position and their interactions on mortality, height and diameter was evaluated for each tree species. In wet conditions mounds proved to be the best option to minimize seedling mortality for conifers, but with decreasing soil moisture, differences between the planting positions decreased. Birch on the other hand had the greatest survival in the hinge. The coniferous species displayed increased height and diameter when planted in mounds independent of the soil moisture conditions, whereas silver birch was less dependent on a specific planting position. Results from this study shows that a soil moisture map can explain mortality, height and diameter and thus can be a useful tool when choosing planting position in different soil moisture conditions.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135444817","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ilkka Korpela, Antti Polvivaara, Saija Papunen, Noora Tienaho, Laura Jaakkola, Johannes Uotila, Tuomas Puputti, Aleksi Flyktman
Tree species identification constitutes a bottleneck in remote sensing applications. Waveform LiDAR has been shown to offer potential over discrete-return observations, and we assessed if the combination of two-wavelength waveform data can lead to further improvements. A total of 2532 trees representing seven living and dead conifer and deciduous species classes found in Hyytiälä forests in southern Finland were included in the experiments. LiDAR data was acquired by two single-wavelength sensors. The 1064-nm and 1550-nm data were radiometrically corrected to enable range-normalization using the radar equation. Pulses were traced through the canopy, and by applying 3D crown models, the return waveforms were assigned to individual trees. Crown models and a terrain model enabled a further split of the waveforms to strata representing the crown, understory and ground segments. Different geometric and radiometric waveform attributes were extracted per return pulse and aggregated to tree-level mean and standard deviation features. We analyzed the effect of tree size on the features, the correlation between features and the between-species differences of the waveform features. Feature importance for species classification was derived using F-test and the Random Forest algorithm. Classification tests showed significant improvement in overall accuracy (74→83% with 7 classes, 88→91% with 4 classes) when the 1064-nm and 1550-nm features were merged. Most features were not invariant to tree size, and the dependencies differed between species and LiDAR wavelength. The differences were likely driven by factors such as bark reflectance, height growth induced structural changes near the treetop as well as foliage density in old trees.
{"title":"Airborne dual-wavelength waveform LiDAR improves species classification accuracy of boreal broadleaved and coniferous trees","authors":"Ilkka Korpela, Antti Polvivaara, Saija Papunen, Noora Tienaho, Laura Jaakkola, Johannes Uotila, Tuomas Puputti, Aleksi Flyktman","doi":"10.14214/sf.22007","DOIUrl":"https://doi.org/10.14214/sf.22007","url":null,"abstract":"Tree species identification constitutes a bottleneck in remote sensing applications. Waveform LiDAR has been shown to offer potential over discrete-return observations, and we assessed if the combination of two-wavelength waveform data can lead to further improvements. A total of 2532 trees representing seven living and dead conifer and deciduous species classes found in Hyytiälä forests in southern Finland were included in the experiments. LiDAR data was acquired by two single-wavelength sensors. The 1064-nm and 1550-nm data were radiometrically corrected to enable range-normalization using the radar equation. Pulses were traced through the canopy, and by applying 3D crown models, the return waveforms were assigned to individual trees. Crown models and a terrain model enabled a further split of the waveforms to strata representing the crown, understory and ground segments. Different geometric and radiometric waveform attributes were extracted per return pulse and aggregated to tree-level mean and standard deviation features. We analyzed the effect of tree size on the features, the correlation between features and the between-species differences of the waveform features. Feature importance for species classification was derived using F-test and the Random Forest algorithm. Classification tests showed significant improvement in overall accuracy (74→83% with 7 classes, 88→91% with 4 classes) when the 1064-nm and 1550-nm features were merged. Most features were not invariant to tree size, and the dependencies differed between species and LiDAR wavelength. The differences were likely driven by factors such as bark reflectance, height growth induced structural changes near the treetop as well as foliage density in old trees.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"145 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135534702","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Felipe de Miguel-Díez, Thomas Purfürst, Mauricio Acuna, Eduardo Tolosana-Esteban, Tobias Cremer
In commercial transaction of stacked roundwood, the estimation of the stack net volume plays a key role. One generalized method to determine the net volume is using conversion factors that relate the gross and net volumes. In this literature review the developed methods to estimate the conversion factors as well as their influencing parameters were analyzed based on 153 references from America and Europe. According to the results, 48 different methods (including their variants) for estimating the conversion factors were developed. The newest methods enabled their accurate determination inexpensively, e.g., photo-optical methods or 3D simulation models. The analyzed references revealed that 30 parameters influence the conversion factors. Based on this comprehensive review, each stakeholder involved in the roundwood supply chain can know which method is used for estimating the conversion factors in the analyzed territories and which influencing parameters should be considered when purchasing roundwood in order to accurately assess the solid wood content in the stacks.
{"title":"Estimation of conversion factors for wood stacks in landings and their influencing parameters: a comprehensive literature review for America and Europe","authors":"Felipe de Miguel-Díez, Thomas Purfürst, Mauricio Acuna, Eduardo Tolosana-Esteban, Tobias Cremer","doi":"10.14214/sf.22018","DOIUrl":"https://doi.org/10.14214/sf.22018","url":null,"abstract":"In commercial transaction of stacked roundwood, the estimation of the stack net volume plays a key role. One generalized method to determine the net volume is using conversion factors that relate the gross and net volumes. In this literature review the developed methods to estimate the conversion factors as well as their influencing parameters were analyzed based on 153 references from America and Europe. According to the results, 48 different methods (including their variants) for estimating the conversion factors were developed. The newest methods enabled their accurate determination inexpensively, e.g., photo-optical methods or 3D simulation models. The analyzed references revealed that 30 parameters influence the conversion factors. Based on this comprehensive review, each stakeholder involved in the roundwood supply chain can know which method is used for estimating the conversion factors in the analyzed territories and which influencing parameters should be considered when purchasing roundwood in order to accurately assess the solid wood content in the stacks.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135635681","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jānis Liepiņš, Ieva Jaunslaviete, Kaspars Liepiņš, Līga Jansone, Roberts Matisons, Andis Lazdiņš, Āris Jansons
While numerous studies have focused on analyzing various aspects of the carbon (C) budget in forests, there appears to be a lack of comprehensive assessments specifically addressing the impact of stem rot on the C budget of broadleaf tree species, especially in old-growth forests where stem rot is prevalent. One of the main challenges in accurately quantifying C losses caused by stem rot is the lack of precise data on the basic density and C content of decayed wood, which are crucial for converting decayed wood volume into biomass and C stocks. Using linear mixed-effects models, we examine the variability of wood basic density, C content, and nitrogen (N) content. Discolored and decomposed wood was collected from the stems of 136 living deciduous trees common in hemiboreal forests in Latvia. Our research indicates a noticeable reduction in the wood basic density, coupled with an increase in the N content within the stem wood throughout the decomposition process in birch (Betula spp.), European aspen (Populus tremula L.), grey alder (Alnus incana (L.) Moench), and common alder (Alnus glutinosa (L.) Gaertn.). While aspen wood showed a decreasing trend in C content as decay progressed, a pairwise comparison test revealed no significant differences in C content between discolored and decomposed wood for the studied species, unlike the findings for basic density and N content. This study emphasizes the need to account for stem rot in old-growth forest carbon budgets, especially in broadleaf species, and calls for more research on stem rot-induced carbon losses.
{"title":"Effect of stem rot on wood basic density, carbon, and nitrogen content of living deciduous trees in hemiboreal forests","authors":"Jānis Liepiņš, Ieva Jaunslaviete, Kaspars Liepiņš, Līga Jansone, Roberts Matisons, Andis Lazdiņš, Āris Jansons","doi":"10.14214/sf.23040","DOIUrl":"https://doi.org/10.14214/sf.23040","url":null,"abstract":"While numerous studies have focused on analyzing various aspects of the carbon (C) budget in forests, there appears to be a lack of comprehensive assessments specifically addressing the impact of stem rot on the C budget of broadleaf tree species, especially in old-growth forests where stem rot is prevalent. One of the main challenges in accurately quantifying C losses caused by stem rot is the lack of precise data on the basic density and C content of decayed wood, which are crucial for converting decayed wood volume into biomass and C stocks. Using linear mixed-effects models, we examine the variability of wood basic density, C content, and nitrogen (N) content. Discolored and decomposed wood was collected from the stems of 136 living deciduous trees common in hemiboreal forests in Latvia. Our research indicates a noticeable reduction in the wood basic density, coupled with an increase in the N content within the stem wood throughout the decomposition process in birch (Betula spp.), European aspen (Populus tremula L.), grey alder (Alnus incana (L.) Moench), and common alder (Alnus glutinosa (L.) Gaertn.). While aspen wood showed a decreasing trend in C content as decay progressed, a pairwise comparison test revealed no significant differences in C content between discolored and decomposed wood for the studied species, unlike the findings for basic density and N content. This study emphasizes the need to account for stem rot in old-growth forest carbon budgets, especially in broadleaf species, and calls for more research on stem rot-induced carbon losses.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135801376","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-12-21DOI: 10.2533/chimia.2022.1063
Valentina Rossetti, Jean-Louis Reymond
In occasion of its conclusion, the National Center of Competence in Research (NCCR) TransCure launched a temporary learning and artistic path in the city of Bern named 'Vitaport - Was unser Körper transportiert'. The path explained how nutrients are transported through our body and how molecules find their way to the right organ to achieve their effect there. NCCR TransCure researchers, together with students of the Bern School of Design, developed ceramic objects, texts and information graphics that took the public on a multidisciplinary journey of discovery through the human body. In this article, we report about aims, development, challenges and outcome of this ambitious science outreach project in which we could experience a rewarding and successful collaboration between scientists and artists.
为此，国家研究能力中心(NCCR) TransCure在伯尔尼市推出了一条名为“Vitaport - Was unser Körper transportiert”的临时学习和艺术之路。这条路径解释了营养物质是如何在我们的身体中运输的，以及分子是如何到达正确的器官以达到它们的效果的。NCCR TransCure的研究人员与伯尔尼设计学院的学生一起，开发了陶瓷物体、文本和信息图形，通过人体将公众带入多学科的发现之旅。在这篇文章中，我们报道了这个雄心勃勃的科学推广项目的目标、发展、挑战和结果，在这个项目中，我们可以体验到科学家和艺术家之间有益而成功的合作。
{"title":"Vitaport: A Learning and Artistic Path for Public Outreach on Transporter Biology, Health and Drug Discovery.","authors":"Valentina Rossetti, Jean-Louis Reymond","doi":"10.2533/chimia.2022.1063","DOIUrl":"10.2533/chimia.2022.1063","url":null,"abstract":"<p><p>In occasion of its conclusion, the National Center of Competence in Research (NCCR) TransCure launched a temporary learning and artistic path in the city of Bern named 'Vitaport - Was unser Körper transportiert'. The path explained how nutrients are transported through our body and how molecules find their way to the right organ to achieve their effect there. NCCR TransCure researchers, together with students of the Bern School of Design, developed ceramic objects, texts and information graphics that took the public on a multidisciplinary journey of discovery through the human body. In this article, we report about aims, development, challenges and outcome of this ambitious science outreach project in which we could experience a rewarding and successful collaboration between scientists and artists.</p>","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"39 1","pages":"1063-1067"},"PeriodicalIF":1.2,"publicationDate":"2022-12-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88870805","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Forestry and forest industries are important for regional income and employment in Norway as well as in most North European countries, but few studies exist about factors affecting the timber supply at regional level. The main objective of this study is to estimate aggregated regional timber supply elasticities for six regions in Norway. Thereby we also test for regional differences, focusing on wood prices, standing stock volume and interest rate as explanatory variables. We have used three different statistical models (fixed and random effects panel models and first difference models) on regional data from the Norwegian forest inventory on standing volume and official statistics on harvested volumes, interest rate and prices of sawlogs and pulpwood for the period 1996â2016. Statistically significant different price elasticities are found in 12 out of total 15 pairs of regions. The price elasticity was lower and the volume elasticity higher in the western region compared to the other regions. The first difference models are best with respect to specification tests. The use of region specific price elasticities gives slightly better fit for the panel data models than using a uniform price parameter. The results show that the econometric specification influence the parameter values, and it is thus complicated to directly compare results in different timber supply studies. Regional differences in timber supply are important to consider.
{"title":"Can we detect regional differences in econometric analyses of the Norwegian timber supply?","authors":"P. Rørstad, B. Solberg, E. Trømborg","doi":"10.14214/sf.10326","DOIUrl":"https://doi.org/10.14214/sf.10326","url":null,"abstract":"Forestry and forest industries are important for regional income and employment in Norway as well as in most North European countries, but few studies exist about factors affecting the timber supply at regional level. The main objective of this study is to estimate aggregated regional timber supply elasticities for six regions in Norway. Thereby we also test for regional differences, focusing on wood prices, standing stock volume and interest rate as explanatory variables. We have used three different statistical models (fixed and random effects panel models and first difference models) on regional data from the Norwegian forest inventory on standing volume and official statistics on harvested volumes, interest rate and prices of sawlogs and pulpwood for the period 1996â2016. Statistically significant different price elasticities are found in 12 out of total 15 pairs of regions. The price elasticity was lower and the volume elasticity higher in the western region compared to the other regions. The first difference models are best with respect to specification tests. The use of region specific price elasticities gives slightly better fit for the panel data models than using a uniform price parameter. The results show that the econometric specification influence the parameter values, and it is thus complicated to directly compare results in different timber supply studies. Regional differences in timber supply are important to consider.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"1 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"66767801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Nature-based tourism (NBT) is a growing industry within regions rich in natural amenities worldwide. An important feature of NBT business is the dependence on the quality of surrounding environment. This paper addresses the role of the management of commercial forests owned by the state in Finnish Lapland. The paper explores the NBT entrepreneurs’ willingness to participate in a proposed new landscape and recreational value trading (LRVT) and elaborates the effect of entrepreneur and enterprise characteristics, such as entrepreneurial attitude, venture size, and a variety of services offered to customers, on the experienced and expected growth of NBT enterprise. The survey data on NBT enterprises were analyzed with ordered and binary logit models. The willingness of enterprises to participate in LRVT depended on the venture size, entrepreneurial attitude, and type of activities offered to customers. The results show that relatively young and small-sized enterprises have faced difficulties in developing their business. Entrepreneurial experience, risk-taking and intention to develop new business associate positively with expected increase in turnover.
{"title":"The role of state-owned commercial forests and firm features in nature-based tourism business performance","authors":"A. Kosenius, A. Juutinen, L. Tyrväinen","doi":"10.14214/sf.10051","DOIUrl":"https://doi.org/10.14214/sf.10051","url":null,"abstract":"Nature-based tourism (NBT) is a growing industry within regions rich in natural amenities worldwide. An important feature of NBT business is the dependence on the quality of surrounding environment. This paper addresses the role of the management of commercial forests owned by the state in Finnish Lapland. The paper explores the NBT entrepreneurs’ willingness to participate in a proposed new landscape and recreational value trading (LRVT) and elaborates the effect of entrepreneur and enterprise characteristics, such as entrepreneurial attitude, venture size, and a variety of services offered to customers, on the experienced and expected growth of NBT enterprise. The survey data on NBT enterprises were analyzed with ordered and binary logit models. The willingness of enterprises to participate in LRVT depended on the venture size, entrepreneurial attitude, and type of activities offered to customers. The results show that relatively young and small-sized enterprises have faced difficulties in developing their business. Entrepreneurial experience, risk-taking and intention to develop new business associate positively with expected increase in turnover.","PeriodicalId":49520,"journal":{"name":"Silva Fennica","volume":"54 1","pages":""},"PeriodicalIF":1.8,"publicationDate":"2020-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"66766719","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":3,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：