Zeitschrift fur Orthopadie und ihre Grenzgebiete最新文献

Aim: The present retrospective study investigates the mid-term results after medial displacement calcaneal osteotomy combined with flexor digitorum longus transfer for the treatment of acquired flatfoot deformity due to posterior tibial tendon insufficiency at stage II (Johnson and Strom Classification).

Method: 30 feet in 29 patients (6 male, 23 female) with an average age of 58 years (from 43 to 68 years) had surgery between 1995 and 2001. All feet were examined at an average follow-up of 58.5 months (range 35-97 months) and were evaluated with the American-Orthopaedic-Foot and Ankle Society (AOFAS) Hindfoot-Score.

Results: The average AOFAS-Score was 88.8+/-10.7 points (range 48 to 100) at final follow-up. The AOFAS-pain-subscale score was 34+/-6.2 points. At the latest follow-up were 14 feet (47%) painfree, 14 feet (47%) noted mild pain and 2 feet (6%) had daily pain. One foot (3%) had pain due to subluxation of the musculus flexor digitorum longus tendon, in another one pain was caused by a contract Chopart joint (3%). Further complications were painful prominent hardware (17%) and neuralgia of the sural nerve (7%).

Conclusion: The authors conclude that the combination of the medial calcaneal displacement osteotomy with flexor digitorum longus transfer may provide optimal results in patients with adult acquired flatfoot deformity and posterior tibialis tendon dysfunction.

Aim: Suture anchors of various designs have gained wide acceptance for securing soft tissues to bone. The biointegrable Tutofix CB anchors derived from bovine compact bone are available with diameters of 3 mm (CB3 anchor), 4 mm (CB4 anchor) and 5 mm (CB5 anchor). The CB anchors are push-in anchors and, from the biomechanical standpoint, they are a combination of press-fit and angulation anchors. The purpose of this study was to evaluate the CB anchors for singular pull load-to-failure strength using porcine tibial head specimens as a test model.

Methods: In all specimens, the joint surface was removed by performing a subchondral osteotomy. Axial PQ-CT scans of 12 specimens were obtained to determine the trabecular BMD. The anchors were implanted posteromedially and centrolaterally in the porcine tibial head specimens. After threading the anchors with a steel suture and predrilling of the anchor holes perpendicular to the osteotomy surface they were inserted 4 mm below the osteotomy surface. A universal testing machine applied tensile loads parallel to the axis of insertion at rates of 10 mm/min and 500 mm/min until pull-out failure or anchor breakage and mean anchor fixation strengths were calculated.

Results: The fixation strength of the CB anchors was found to be much higher at the dorsomedial implantation site than at the centrolateral implantation site. The CB4 anchors and CB5 anchors provided nearly the same fixation strength at a level much higher than that of the CB3 anchors. Bone mineral density had a strong influence on axial pull-out force of the anchors, especially the CB4 anchors and CB5 anchors. The overall correlation coefficient for bone mineral density with ultimate load-to-failure was 0.869 for the CB4 anchors and 0.716 for the CB5 anchors. Differences in failure strengths were also seen between the low and high extraction rates. With the high extraction rate much higher failure strengths were obtained than with the low extraction rate. The sudden pull eccentrically on the anchors caused a better fixation due to angulation of the anchor within the drill holes.

Conclusion: In spite of the double worst-case scenario in the testing conditions, the CB anchors provided a high fixation strength in the trabecular bone of porcine tibial head specimens with the CB4 anchors and CB5 anchors being nearly equal and both being superior to the CB3 anchors. Bone mineral density had a strong influence on the axial pull-out force. Our results show that the CB anchors seem to be a reasonable alternative to metal and bioabsorbable suture anchors.

Introduction: The purpose of this study was to evaluate the influence of different surface topographies on the expression of bone cell-associated proteins, such as osteoprotegerin (OPG), osteocalcin and alkaline phosphatase (AP), and the production of the extracellular matrix (ECM) in vitro. Another aspect was the question as to whether a hydroxyapatite (HA) coating offers additional advantages. Vacuum plasma-sprayed (VPS) pure titanium was used to generate different surface topographies.

Materials and methods: The in vitro response of human bone marrow cells to VPS implants (porosity ranging from 25 to 50%, pore size ranging from 50 to 200 microm and roughness ranging from 0.191 to 0.547 mm) and cancellous structured titanium (cs-Ti) as a reference material (55% porosity, pore size of 500 microm, roughness 0.836 mm) were compared. The expression of bone cell-associated proteins, such as OPG, osteocalcin and alkaline phosphatase (AP), was evaluated. Scanning electron microscopy (SEM) was used to judge the production of ECM.

Results: All implant materials induced the release of OPG, osteocalcin and AP. Significant differences were evident between the cs-Ti and the different VPS-Ti surface structures. There was no difference in the response between the VPS-Ti surfaces. SEM showed a dense and increased production of ECM on the VPS-Ti surfaces. An additional HA coating caused a faster production of ECM and higher levels of OPG.

Conclusions: The in vitro data presented here demonstrate the superiority of VPS-Ti surfaces over cs-Ti, which is already in clinical use. Differences between the VPS-Ti surfaces were not evident. Presumably, VPS-Ti surfaces offer good prerequisites for a successful integration of the implant in the surrounding tissue. An additional HA coating could influence these events positively.

We present the clinical case of a fifty-year-old man who presented two times with a foot elevator paresis and an erysipel first on the right and after two months on the left side. Afterwards, we carried out a thorough case history with the help of clinical, radiological and magnetic resonance imaging. Even so the clinical pathology of the foot elevator paresis could not be manifested. A compartment syndrome could be discounted. In the context of the second stay during a neurology examination on both legs electromyography was performed and the nerve speed was tested. A peripheral peroneus paresis of unknown level and of unknown aetiology was demonstrated. The erysipel regressed rapidly under intravenous ampicillin antibiotics while the peroneus paresis was unchanged. The patent was released with a peroneus splint on both sides. With this case report we would like to point out the causes of peripheral peroneus paresis with regard to an additional erysipel. This case report is discussed regarding the possible aetiopathology and the current literature.

Reconstructive surgery of rotator cuff tears tries to restore a stable center of rotation in the shoulder joint. Both the classic technique of open surgery and the arthroscopic technique are employed to reconstruct the rotator cuff. This review tries to answer the question which of both surgical techniques is superior by a review of the literature. The recent literature demonstrates a shorter follow-up period for publications concerning arthroscopic reconstruction (mean 3 years) in comparison to open surgery, where follow-up is in mean 6.2 years. Overall arthroscopic surgery achieves good and excellent results between 68 to 96%, open reconstruction between 77 and 91%. Longevity of reconstructed rotator cuffs especially in large tears seems to be significantly shorter if an arthroscopic technique was used. Several authors mentioned size of tear as a major factor influencing longevity. However in patients treated arthroscopically despite rerupture of the rotor cuff patient's satisfaction and clinical outcome is still very good in short-term follow-up. In case of a complete tear of one tendon of the rotator cuff the arthroscopic technique seems to be superior. If large tears occur (two or three tendons) the open surgical technique may be more reliable with regard to longevity of the repair. For the future it seems necessary to obtain long-term results to be able to compare both principles of reconstruction of the rotator cuff. Furthermore these future studies should include quality of life scores as measurements tools besides the already employed parameters as size of the tear, age at surgery, patient satisfaction and outcome scores.

We report on the case of a 66-year-old patient who was hospitalized because of intractable low back pain radiating into the right leg. Leg pain was accompanied by a numbness and muscle weakness which was clearly assigned to the L5 dermatome. Concerning the patient's medical history a nucleotomy L4/5 and a osteomyelofibrosis were known. MRI of the lumbar spine revealed a multisegmental stenosis which was pronounced on the level L4/5. One day after admission of the patient to the hospital a typical zoster exanthema involving the L5 dermatome appeared. Varicella-zoster virus (VZV) was detected in the fluid of the vesicular skin lesions by polymerase chain reaction. Intravenous administration of aciclovir lead to rapid decrease of pain and exanthema. A few months later the patient died because of an acute myeloid leukemia as a complication of the known osteomyelofibrosis. This case report shows that a herpes zoster infection can imitate a radicular spine syndrome usually caused by degenerative changes. Especially in immunocompromised patients, a zoster radiculitis should be included in the differential diagnosis of radiculopathy. VZV infection might also occur without skin lesions (zoster sine herpete) so that serological assays for the early detection of virus DNA can be useful.

Aim: At present the vacuum sealing technique is acknowledged as a therapy for acute and chronic wounds. An acceleration of the healing process, due to the vacuum suction with occlusive wound dressing, leads to the shortening of a cost-effective medical treatment. This can be applied to wound treatment and infections of soft tissues, but even today there is only sparse information in this context about joint infections.

Method: The results of therapy with the vacuum sealing technique in 68 patients with infections of the joints of an extremity or the trunk were analysed in a retrospective study without a control group. The importance of several patient-related factors for the medical treatment have been analysed.

Results: An adequate treatment of joint infections can be achieved even in the presence of endoprostheses or osteosynthetic material. The following factors have been found to be of significance for a prolonged medical treatment: diabetes mellitus (p=0.0052), obesity (BMI>25) (p=0.0458) and a preceding trauma (p=0.0457).

Conclusion: The results confirm the value of the vacuum sealing technique following surgical debridement in combination with resistance tested antibiotic treatment, as a sufficient therapy for joint infections, even in patients with an endoprosthesis. This procedure leads to a safe treatment of the joint infection, combined with a good function of the treated joint, good patient comfort and a short duration of the therapy.

Aim: Under early mobilisation and full weightbearing the primary stability of two different cementless hip stems should be examined by using Roentgen Stereometric Analysis (RSA).

Method: 26 patients (slashed circle 60.8+/-7.5 J., 16 m, 10 w, BMI 27.7+/-3.9 kg/m2) received a total hip arthroplasty with an anatomical designed image-stem (IS) (Smith & Nephew, Schenefeld, Germany), 20 patients (slashed circle 60.0+/-10.9 J., 12 m, 8 w, BMI 27.5+/-3 .7 kg/m2) the Bicontact-stem (BS) (Aesculap, Tuttllingen, Germany). RSA measurements were done before mobilizing, 3 and 6 weeks, 3, 6, 12 and 24 months postoperatively. Furthermore the patients had to estimate their pain on a visually scale (VAS). We registrated the Harris-Hip-Score (HHS) and the Western Ontario and McMasters Universities Osteoarthritis Index (WOMAC).

Results: Both stems showed the maximum of subsidence in the first 3 months (IS 0.647 mm, BS 0.54 mm). 6 months postoperative the measured migrations were in the range of the accuracy. After 2 years the subsidence was 1.07 mm+/-0.07 mm for the IS-group, 0.97 mm+/-0.18 mm for the BS-group. There were no significant differences in the examined parameters between the both groups. An excellent prostheses function and high activity grade with a high WOMAC score, a high HHS and a low VAS was founded for both groups.

Conclusion: Both cementless implanted titanium hip stems showed a sufficient primary and midterm stability with excellent clinical results. The measured migrations do not differ from those given in literature for cemented stems.

Aim: The purpose of the present study is to evaluate wether the gliding nail with it's double-t-shaped geometry is appropriate in the stabilization of unstable trochanteric fractures or not and if this evaluation can be performed with a static finite element simulation.

Methods: Surface-Reconstruction with CT database of a proximal femur and reconstruction with CT based density data was done. After modelling of geometry, isotropic material behaviour and load application during one leg standing in slow walking was done with a limited dataset of relevant muscles. Two relevant fractures are modelled.

Results: FE-simulation shows a movement of the femoral head distally, medially and posteriorly. Maximum bending strain is in the femoral diaphysis medial compression and lateral tension strain. In the proximal part we find a nearly homogeneous strain distribution. The clinical effect of lateralization of the proximal main fragment is also result of the simulation. In the area of the modelled fractures there is much more compressive stress than shear stress.

Conclusion: Elastomechanical behaviour of the gliding nail is demonstrated with correlation of clinical observed effects. In both simulated fracture areas there is a bone union supporting compressive stress. This means in the FE-simulation the gliding nail is appropriate in the stabilization in unstable trochanteric fractures.