Pub Date : 2022-07-18DOI: 10.3390/surgeries3030021
Angel Moctezuma-Ramirez, A. Elgalad, K. Handy, Gil Costas, O. Frazier
The use of large animal models in the preclinical setting has expanded and become increasingly valuable for evaluating the safety and efficacy of new therapies and devices. Here, we report normal hemodynamic values, including aortic and pulmonary blood flow, in a bovine model at rest and during exercise after a control procedure. We performed a left lateral thoracotomy and implanted fluid-filled pressure lines (aortic pressure, right atrial pressure, left atrial pressure, pulmonary artery pressure) and left (systemic) and right (pulmonary) flow probe lines. Throughout the postoperative period, the calf’s physiologic pressures, vital signs, aortic and pulmonary blood flow, and pulmonary and systemic vascular resistance were recorded hourly at rest and during treadmill exercise evaluations. When pressures and flow rates at baseline and during treadmill trials were compared, we observed a physiologic response to exercise similar to that seen in humans, with a sympathetic discharge that increased systolic blood pressure. However, the rise in mean arterial pressure was much lower due to an overall decrease in vascular resistance, which increased blood flow. This study provides investigators, device engineers, and manufacturers with normal bovine cardiovascular physiology data that can be used for technical consideration during device development for preclinical trials.
{"title":"Baseline Hemodynamics Including Aortic and Pulmonary Blood Flow in a Chronic Bovine Model","authors":"Angel Moctezuma-Ramirez, A. Elgalad, K. Handy, Gil Costas, O. Frazier","doi":"10.3390/surgeries3030021","DOIUrl":"https://doi.org/10.3390/surgeries3030021","url":null,"abstract":"The use of large animal models in the preclinical setting has expanded and become increasingly valuable for evaluating the safety and efficacy of new therapies and devices. Here, we report normal hemodynamic values, including aortic and pulmonary blood flow, in a bovine model at rest and during exercise after a control procedure. We performed a left lateral thoracotomy and implanted fluid-filled pressure lines (aortic pressure, right atrial pressure, left atrial pressure, pulmonary artery pressure) and left (systemic) and right (pulmonary) flow probe lines. Throughout the postoperative period, the calf’s physiologic pressures, vital signs, aortic and pulmonary blood flow, and pulmonary and systemic vascular resistance were recorded hourly at rest and during treadmill exercise evaluations. When pressures and flow rates at baseline and during treadmill trials were compared, we observed a physiologic response to exercise similar to that seen in humans, with a sympathetic discharge that increased systolic blood pressure. However, the rise in mean arterial pressure was much lower due to an overall decrease in vascular resistance, which increased blood flow. This study provides investigators, device engineers, and manufacturers with normal bovine cardiovascular physiology data that can be used for technical consideration during device development for preclinical trials.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44930359","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-07-04DOI: 10.3390/surgeries3030020
J. Doerner
Lynch syndrome (LS) is the most common genetic condition associated with early-onset colorectal cancer. It is inherited in an autosomal dominant fashion. The increased cancer risk is due to a germline mutation in one of the mismatch repair (MMR) genes (MLH1, MSH2, MSH6, and PMS2) or the EPCAM gene. This leads to a deficient DNA mismatch repair mechanism, resulting in the accumulation of nucleotide changes and microsatellite instability, providing phenotypical evidence that MMR is not functioning normally. LS is associated with a high risk of early-onset colorectal cancer and recurrence. Thus, when undergoing surgery for primary colorectal cancer, extended resection should be discussed with the patient. This review provides an overview of current surgical risk-reducing strategies in LS-associated colorectal cancer. Surgical treatment for LS carriers with colorectal cancer needs to be highly individualized, based on patient and disease characteristics. Strategies are presented to guide decision making in pathologic MMR gene mutation carriers undergoing surgery for colorectal cancer.
{"title":"Risk of Metachronous Colorectal Cancer in Lynch Syndrome: Who Needs an Extended Resection?","authors":"J. Doerner","doi":"10.3390/surgeries3030020","DOIUrl":"https://doi.org/10.3390/surgeries3030020","url":null,"abstract":"Lynch syndrome (LS) is the most common genetic condition associated with early-onset colorectal cancer. It is inherited in an autosomal dominant fashion. The increased cancer risk is due to a germline mutation in one of the mismatch repair (MMR) genes (MLH1, MSH2, MSH6, and PMS2) or the EPCAM gene. This leads to a deficient DNA mismatch repair mechanism, resulting in the accumulation of nucleotide changes and microsatellite instability, providing phenotypical evidence that MMR is not functioning normally. LS is associated with a high risk of early-onset colorectal cancer and recurrence. Thus, when undergoing surgery for primary colorectal cancer, extended resection should be discussed with the patient. This review provides an overview of current surgical risk-reducing strategies in LS-associated colorectal cancer. Surgical treatment for LS carriers with colorectal cancer needs to be highly individualized, based on patient and disease characteristics. Strategies are presented to guide decision making in pathologic MMR gene mutation carriers undergoing surgery for colorectal cancer.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48562791","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-30DOI: 10.3390/surgeries3030019
R. Nurmukhametov, Medet Dosanov, M. Encarnacion, Rossi Barrientos, Yasser Matos, A. I. Alyokhin, I. P. Baez, I. E. Efe, M. Restrepo, Vishal Chavda, B. Chaurasia, N. Montemurro
More contemporary options have been presented in the last few years as surgical methods and materials have improved in patients with degenerative spine illnesses. The use of biologically integrated titanium cages of a unique design based on computer 3D modeling for the surgical treatment of patients with degenerative illnesses of the spine’s intervertebral discs has been proposed and experimentally tested. The goal of this study is to compare the radiographic and clinical outcomes of lumbar posterior interbody fusion with a 3D porous titanium alloy cage versus a titanium-coated polyetheretherketone (PEEK) cage, including fusion quality, time to fusion, preoperative and postoperative patient assessments, and the presence, severity, and other side effect characteristics. (1) Methods: According to the preceding technique, patients who were operated on with physiologically integrated titanium cages of a unique design based on 3D computer modeling were included in the study group. This post-surveillance study was conducted as a randomized, prospective, interventional, single-blind, center study to look at the difference in infusion rates and the difference compared to PEEK cages. The patients were evaluated using CT scans, Oswestry questionnaires (every 3, 6, and 12 months), and VAS scales. (2) Results: Six months following surgery, the symptoms of fusion and the degree of cage deflation in the group utilizing the porous titanium 3D cage were considerably lower than in the group using the PEEK cage (spinal fusion sign, p = 0.044; cage subsidence, p = 0.043). The control group had one case of cage migration into the spinal canal with screw instability, one case of screw instability without migration but with pseudoarthrosis formation and two surrounding segment syndromes with surgical revisions compared with the 3D porous titanium alloy cage group. (3) Conclusions: The technique for treating patients with degenerative disorders or lumbar spine instability with aspects of neural compression utilizing biologically integrated titanium cages of a unique design based on computer 3D printing from CT scans has been proven. This allows a new approach of spinal fusion to be used in practice, restoring the local sagittal equilibrium of the spinal motion segment and lowering the risk of pseudarthrosis and revision surgery.
{"title":"Transforaminal Fusion Using Physiologically Integrated Titanium Cages with a Novel Design in Patients with Degenerative Spinal Disorders: A Pilot Study","authors":"R. Nurmukhametov, Medet Dosanov, M. Encarnacion, Rossi Barrientos, Yasser Matos, A. I. Alyokhin, I. P. Baez, I. E. Efe, M. Restrepo, Vishal Chavda, B. Chaurasia, N. Montemurro","doi":"10.3390/surgeries3030019","DOIUrl":"https://doi.org/10.3390/surgeries3030019","url":null,"abstract":"More contemporary options have been presented in the last few years as surgical methods and materials have improved in patients with degenerative spine illnesses. The use of biologically integrated titanium cages of a unique design based on computer 3D modeling for the surgical treatment of patients with degenerative illnesses of the spine’s intervertebral discs has been proposed and experimentally tested. The goal of this study is to compare the radiographic and clinical outcomes of lumbar posterior interbody fusion with a 3D porous titanium alloy cage versus a titanium-coated polyetheretherketone (PEEK) cage, including fusion quality, time to fusion, preoperative and postoperative patient assessments, and the presence, severity, and other side effect characteristics. (1) Methods: According to the preceding technique, patients who were operated on with physiologically integrated titanium cages of a unique design based on 3D computer modeling were included in the study group. This post-surveillance study was conducted as a randomized, prospective, interventional, single-blind, center study to look at the difference in infusion rates and the difference compared to PEEK cages. The patients were evaluated using CT scans, Oswestry questionnaires (every 3, 6, and 12 months), and VAS scales. (2) Results: Six months following surgery, the symptoms of fusion and the degree of cage deflation in the group utilizing the porous titanium 3D cage were considerably lower than in the group using the PEEK cage (spinal fusion sign, p = 0.044; cage subsidence, p = 0.043). The control group had one case of cage migration into the spinal canal with screw instability, one case of screw instability without migration but with pseudoarthrosis formation and two surrounding segment syndromes with surgical revisions compared with the 3D porous titanium alloy cage group. (3) Conclusions: The technique for treating patients with degenerative disorders or lumbar spine instability with aspects of neural compression utilizing biologically integrated titanium cages of a unique design based on computer 3D printing from CT scans has been proven. This allows a new approach of spinal fusion to be used in practice, restoring the local sagittal equilibrium of the spinal motion segment and lowering the risk of pseudarthrosis and revision surgery.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43946865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-28DOI: 10.3390/surgeries3030018
Alexandrine Dussault, Audrey A Pitaru, Michael H. Weber, L. Haglund, D. Rosenzweig, I. Villemure
Current materials used to fill bone defects (ceramics, cement) either lack strength or do not induce bone repair. The use of biodegradable polymers such as PLA may promote patient healing by stimulating the production of new bone in parallel with a controlled degradation of the scaffold. This project aims to determine the design parameters maximising scaffold mechanical performance in such materials. Starting from a base cylindrical model of 10 mm height and of outer and inner diameters of 10 and 4 mm, respectively, 27 scaffolds were designed. Three design parameters were investigated: pore distribution (crosswise, lengthwise, and eccentric), pore shape (triangular, circular, and square), and pore size (surface area of 0.25 mm2, 0.5625 mm2, and 1 mm2). Using the finite element approach, a compressive displacement (0.05 mm/s up to 15% strain) was simulated on the models and the resulting scaffold stiffnesses (N/mm2) were compared. The models presenting good mechanical behaviors were further printed along two orientations: 0° (cylinder sitting on its base) and 90° (cylinder laying on its side). A total of n = 5 specimens were printed with PLA for each of the retained models and experimentally tested using a mechanical testing machine with the same compression parameters. Rigidity and yield strength were evaluated from the experimental curves. Both numerically and experimentally, the highest rigidity was found in the model with circular pore shape, crosswise pore distribution, small pore size (surface area of 0.25 mm2), and a 90° printing orientation. Its average rigidity reached 961 ± 32 MPa from the mechanical testing and 797 MPa from the simulation, with a yield strength of 42 ± 1.5 MPa. The same model with a printing orientation of 0° resulted in an average rigidity of 515 ± 7 MPa with a yield strength of 32 ± 1.6 MPa. Printing orientation and pore size were found to be the most influential design parameters on rigidity. The developed design methodology should accelerate the identification of effective scaffolds for future in vitro and in vivo studies.
{"title":"Optimizing Design Parameters of PLA 3D-Printed Scaffolds for Bone Defect Repair","authors":"Alexandrine Dussault, Audrey A Pitaru, Michael H. Weber, L. Haglund, D. Rosenzweig, I. Villemure","doi":"10.3390/surgeries3030018","DOIUrl":"https://doi.org/10.3390/surgeries3030018","url":null,"abstract":"Current materials used to fill bone defects (ceramics, cement) either lack strength or do not induce bone repair. The use of biodegradable polymers such as PLA may promote patient healing by stimulating the production of new bone in parallel with a controlled degradation of the scaffold. This project aims to determine the design parameters maximising scaffold mechanical performance in such materials. Starting from a base cylindrical model of 10 mm height and of outer and inner diameters of 10 and 4 mm, respectively, 27 scaffolds were designed. Three design parameters were investigated: pore distribution (crosswise, lengthwise, and eccentric), pore shape (triangular, circular, and square), and pore size (surface area of 0.25 mm2, 0.5625 mm2, and 1 mm2). Using the finite element approach, a compressive displacement (0.05 mm/s up to 15% strain) was simulated on the models and the resulting scaffold stiffnesses (N/mm2) were compared. The models presenting good mechanical behaviors were further printed along two orientations: 0° (cylinder sitting on its base) and 90° (cylinder laying on its side). A total of n = 5 specimens were printed with PLA for each of the retained models and experimentally tested using a mechanical testing machine with the same compression parameters. Rigidity and yield strength were evaluated from the experimental curves. Both numerically and experimentally, the highest rigidity was found in the model with circular pore shape, crosswise pore distribution, small pore size (surface area of 0.25 mm2), and a 90° printing orientation. Its average rigidity reached 961 ± 32 MPa from the mechanical testing and 797 MPa from the simulation, with a yield strength of 42 ± 1.5 MPa. The same model with a printing orientation of 0° resulted in an average rigidity of 515 ± 7 MPa with a yield strength of 32 ± 1.6 MPa. Printing orientation and pore size were found to be the most influential design parameters on rigidity. The developed design methodology should accelerate the identification of effective scaffolds for future in vitro and in vivo studies.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42500525","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-22DOI: 10.3390/surgeries3030017
M. Chęciński, Zuzanna Nowak
Background: Pleomorphic adenoma (PA), also known as a mixed tumor, is a neoplasm of the glandular tissue. The maxillary sinus (MS) is an atypical location of PA; however, as an empty cavity inside the bone, it predisposes tumors to develop unnoticed. The aim of the following systematic review was to identify and characterize the diagnostics and prognosis of maxillary sinus pleomorphic adenoma (MSPA). Methods: The cases of MSPA that underwent treatment and were observed for possible recurrence were qualified for the review. The medical databases were searched using the following engines: ACM, BASE, Google Scholar and PubMed. The risk of bias was assessed using the JBI Critical Appraisal Tool for Case Reports. The extracted data were tabulated and summarized in a descriptive manner. Results: To the best knowledge of the authors, only seven cases of MSPA were described in the last 20 years. Relapse occurred in three of these cases and malignant transformation occurred in two. The longest recorded time without recurrence was 4 years. The size of the detected MSPA in the largest dimension ranged in various cases from 40 to 60 mm, with an average of 48 mm. Discussion: All but one of the seven included reports showed flaws during the risk of bias assessment. Only in two of seven reported cases was there no reason to suspect that the tumor had penetrated the sinus from the oral or nasal cavity. The MS is disadvantageous as a location as tumors occupying the entire volume of the sinus are often diagnosed. Recurrences and malignant transformations seem to be frequent and often remain undetected for a prolonged period. Other information: This research received no external funding. OSF Registries number: 8KVGM.
{"title":"Maxillary Sinus Pleomorphic Adenoma: A Systematic Review","authors":"M. Chęciński, Zuzanna Nowak","doi":"10.3390/surgeries3030017","DOIUrl":"https://doi.org/10.3390/surgeries3030017","url":null,"abstract":"Background: Pleomorphic adenoma (PA), also known as a mixed tumor, is a neoplasm of the glandular tissue. The maxillary sinus (MS) is an atypical location of PA; however, as an empty cavity inside the bone, it predisposes tumors to develop unnoticed. The aim of the following systematic review was to identify and characterize the diagnostics and prognosis of maxillary sinus pleomorphic adenoma (MSPA). Methods: The cases of MSPA that underwent treatment and were observed for possible recurrence were qualified for the review. The medical databases were searched using the following engines: ACM, BASE, Google Scholar and PubMed. The risk of bias was assessed using the JBI Critical Appraisal Tool for Case Reports. The extracted data were tabulated and summarized in a descriptive manner. Results: To the best knowledge of the authors, only seven cases of MSPA were described in the last 20 years. Relapse occurred in three of these cases and malignant transformation occurred in two. The longest recorded time without recurrence was 4 years. The size of the detected MSPA in the largest dimension ranged in various cases from 40 to 60 mm, with an average of 48 mm. Discussion: All but one of the seven included reports showed flaws during the risk of bias assessment. Only in two of seven reported cases was there no reason to suspect that the tumor had penetrated the sinus from the oral or nasal cavity. The MS is disadvantageous as a location as tumors occupying the entire volume of the sinus are often diagnosed. Recurrences and malignant transformations seem to be frequent and often remain undetected for a prolonged period. Other information: This research received no external funding. OSF Registries number: 8KVGM.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48832451","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-15DOI: 10.3390/surgeries3020016
M. Chęciński, Krzysztof Wróbel, Maciej Sikora
The aim of this report is to present a successful combined surgical and pharmaceutical treatment in the highest stage of medicine-related osteonecrosis of the jaw (MRONJ). A 70-year-old man treated for metastatic prostate cancer concomitant with hypertension and diabetes presented due to the exposure of the jawbone. Initial imaging studies suggested MRONJ, and the biopsy did not confirm bone metastasis in the oral cavity. Marginal resection of the mandible was performed after the administration of antibiotics and anticoagulants. There was no recurrence of mandibular necrosis during the 3-year follow-up. MRONJ can develop covertly, with scanty clinical symptoms, and can be easily overlooked. Radical combined treatment may, in some cases, prevent further progression of the disease, which was successful in this case.
{"title":"Medication-Related Osteonecrosis of the Mandible Treated with Marginal Resection: A Case Report","authors":"M. Chęciński, Krzysztof Wróbel, Maciej Sikora","doi":"10.3390/surgeries3020016","DOIUrl":"https://doi.org/10.3390/surgeries3020016","url":null,"abstract":"The aim of this report is to present a successful combined surgical and pharmaceutical treatment in the highest stage of medicine-related osteonecrosis of the jaw (MRONJ). A 70-year-old man treated for metastatic prostate cancer concomitant with hypertension and diabetes presented due to the exposure of the jawbone. Initial imaging studies suggested MRONJ, and the biopsy did not confirm bone metastasis in the oral cavity. Marginal resection of the mandible was performed after the administration of antibiotics and anticoagulants. There was no recurrence of mandibular necrosis during the 3-year follow-up. MRONJ can develop covertly, with scanty clinical symptoms, and can be easily overlooked. Radical combined treatment may, in some cases, prevent further progression of the disease, which was successful in this case.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45643530","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-24DOI: 10.3390/surgeries3020015
C. Calvo-Henríquez, M. Mayo-Yáñez, C. Chiesa-Estomba, G. Martínez-Capoccioni, C. Martin-Martin
Objective: the superior attachment of the uncinate process (SAUP) is highly variable. Lateral types of SAUP are associated with frontal rhinosinusitis. SAUP in the middle turbinate is more common when the middle turbinate is aerated. We aim to refine these findings by studying the relationship between the SAUP type and the different subtypes of pneumatization of the middle turbinate. Methods: 200 CT sinonasal scans were analyzed by an otolaryngologist and a radiologist. All CT scans were analyzed to study the type of the middle turbinate concha bullosa and lamellar cell and the type of SAUP. Results: 379 sides were analyzed. The prevalence of the various types of SAUP were: Type I: 43.80%, Type II: 22.16%, Type III: 16.36%, Type IV: 3.69%, Type V: 9.76%, and Type VI: 4.22%. When studying the pneumatization of the middle turbinate and the SAUP types, we only found a statistically significant association between the lateral attachment of the uncinate process and the presence of a lamellar cell (p = 0.029). Conclusion: lateral types of SAUP are more likely in the presence of a lamellar cell. This finding, therefore, renders checking for lateral SAUP types in the presence of a lamellar cell even more relevant than when studying the pre-surgical CT scan. In those cases, it is advisable to perform a careful and complete uncinectomy.
{"title":"Relationship between the Superior Attachment of the Uncinate Process and Pneumatization of the Middle Turbinate—A Radiological Study","authors":"C. Calvo-Henríquez, M. Mayo-Yáñez, C. Chiesa-Estomba, G. Martínez-Capoccioni, C. Martin-Martin","doi":"10.3390/surgeries3020015","DOIUrl":"https://doi.org/10.3390/surgeries3020015","url":null,"abstract":"Objective: the superior attachment of the uncinate process (SAUP) is highly variable. Lateral types of SAUP are associated with frontal rhinosinusitis. SAUP in the middle turbinate is more common when the middle turbinate is aerated. We aim to refine these findings by studying the relationship between the SAUP type and the different subtypes of pneumatization of the middle turbinate. Methods: 200 CT sinonasal scans were analyzed by an otolaryngologist and a radiologist. All CT scans were analyzed to study the type of the middle turbinate concha bullosa and lamellar cell and the type of SAUP. Results: 379 sides were analyzed. The prevalence of the various types of SAUP were: Type I: 43.80%, Type II: 22.16%, Type III: 16.36%, Type IV: 3.69%, Type V: 9.76%, and Type VI: 4.22%. When studying the pneumatization of the middle turbinate and the SAUP types, we only found a statistically significant association between the lateral attachment of the uncinate process and the presence of a lamellar cell (p = 0.029). Conclusion: lateral types of SAUP are more likely in the presence of a lamellar cell. This finding, therefore, renders checking for lateral SAUP types in the presence of a lamellar cell even more relevant than when studying the pre-surgical CT scan. In those cases, it is advisable to perform a careful and complete uncinectomy.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-05-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43453848","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-19DOI: 10.3390/surgeries3020014
Pasquale Auricchio, E. Tanay, Christopher Kieninger, J. Köninger, T. Meile
Introduction: According to the high rate of patients requiring a Re-Do surgery after a primary Sleeve Gastrectomy, due to failure on weight loss, this study proposes a comparison between RYGB and OAGB as a secondary intervention for morbidly obese patients. Methods: A retrospective review of patients who underwent revisional surgery to convert SG to RYGB or OAGB at our institution from November 2011 to November 2019 was performed. Results: A subset of sixty-three patients with previous SG underwent revisional surgery due to failure of the primary intervention. The OAGB group (n = 17) had a mean BMI at the time of the sleeve of 62 kg/m2 and a mean BMI of 50.7 kg/m2, the length of the Omega was 139.35 cm. The RYGB (n = 46) group showed a mean BMI of 47 kg/m2 at the time of the sleeve and a BMI of 34.8 kg/m2 at the time of the revision. The RYGB was performed according to the 70/120 cm standard for all the patients. One patient also had a revision from secondary OAGB to RYGB due to persistent biliary reflux, in this case the biliary branch was settled at 150 cm and the alimentary at 50 cm. Conclusions: The outcomes in the OAGB group showed a 29%WL and a 47%EWL (out of a 17%WL and 28%EWL at the time of the sleeve), on the other side the RYGB group reached a 33%WL and 72%EWL (out of a 25%WL and a 54%EWL at the time of the sleeve). According to our data we assume that RYGB is more effective in terms of weight loss as a revisional surgery after sleeve
{"title":"Re-Do Surgery after Sleeve Gastrectomy: A Single Center Comparison between Roux-en-Y Gastric Bypass and One Anastomosis Gastric Bypass","authors":"Pasquale Auricchio, E. Tanay, Christopher Kieninger, J. Köninger, T. Meile","doi":"10.3390/surgeries3020014","DOIUrl":"https://doi.org/10.3390/surgeries3020014","url":null,"abstract":"Introduction: According to the high rate of patients requiring a Re-Do surgery after a primary Sleeve Gastrectomy, due to failure on weight loss, this study proposes a comparison between RYGB and OAGB as a secondary intervention for morbidly obese patients. Methods: A retrospective review of patients who underwent revisional surgery to convert SG to RYGB or OAGB at our institution from November 2011 to November 2019 was performed. Results: A subset of sixty-three patients with previous SG underwent revisional surgery due to failure of the primary intervention. The OAGB group (n = 17) had a mean BMI at the time of the sleeve of 62 kg/m2 and a mean BMI of 50.7 kg/m2, the length of the Omega was 139.35 cm. The RYGB (n = 46) group showed a mean BMI of 47 kg/m2 at the time of the sleeve and a BMI of 34.8 kg/m2 at the time of the revision. The RYGB was performed according to the 70/120 cm standard for all the patients. One patient also had a revision from secondary OAGB to RYGB due to persistent biliary reflux, in this case the biliary branch was settled at 150 cm and the alimentary at 50 cm. Conclusions: The outcomes in the OAGB group showed a 29%WL and a 47%EWL (out of a 17%WL and 28%EWL at the time of the sleeve), on the other side the RYGB group reached a 33%WL and 72%EWL (out of a 25%WL and a 54%EWL at the time of the sleeve). According to our data we assume that RYGB is more effective in terms of weight loss as a revisional surgery after sleeve","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-05-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46593608","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-13DOI: 10.3390/surgeries3020013
Carlos Daniel Varela-Chinchilla, Gabriel Salinas-McQuary, N. Segura-Azuara, P. A. Trinidad-Calderón
Breast implant illness refers to a combination of different symptoms related to breast implant surgery, including fatigue, brain fog, and arthralgias. This malaise occurs after cosmetic and reconstructive breast surgeries, although it has not been proven to be a disease. Even recent studies have reported concluding statements of the etiology, diagnosis, and treatment as unclear and widely unknown. Therefore, this review aimed to determine the associations between the manifestations of breast implant illness in surgery and breast reconstruction, as well as the autoimmune responses involved. Complications associated with breast implants include breast pain, capsular contracture, infections, as well as other manifestations specific to breast reconstruction. Moreover, patients with implants may present with new-onset systemic sclerosis, Sjögren’s syndrome, and connective tissue diseases. However, the incidence of capsular contracture has steadily decreased with each generation of implants, particularly since the development of textured implants, as well as with the use of antibiotics and antiseptic pocket irrigation. However, the incidence of anaplastic large cell lymphoma has increased with the use of textured implants. Remarkably, the autoimmune response to these implants remains unclear. Therefore, close follow-up, careful observation of any symptom presentation, and evidence-based treatment decisions are necessary for patients with breast implants.
{"title":"Breast Implant Illness: Surgical, Autoimmune, and Breast Reconstruction Associations","authors":"Carlos Daniel Varela-Chinchilla, Gabriel Salinas-McQuary, N. Segura-Azuara, P. A. Trinidad-Calderón","doi":"10.3390/surgeries3020013","DOIUrl":"https://doi.org/10.3390/surgeries3020013","url":null,"abstract":"Breast implant illness refers to a combination of different symptoms related to breast implant surgery, including fatigue, brain fog, and arthralgias. This malaise occurs after cosmetic and reconstructive breast surgeries, although it has not been proven to be a disease. Even recent studies have reported concluding statements of the etiology, diagnosis, and treatment as unclear and widely unknown. Therefore, this review aimed to determine the associations between the manifestations of breast implant illness in surgery and breast reconstruction, as well as the autoimmune responses involved. Complications associated with breast implants include breast pain, capsular contracture, infections, as well as other manifestations specific to breast reconstruction. Moreover, patients with implants may present with new-onset systemic sclerosis, Sjögren’s syndrome, and connective tissue diseases. However, the incidence of capsular contracture has steadily decreased with each generation of implants, particularly since the development of textured implants, as well as with the use of antibiotics and antiseptic pocket irrigation. However, the incidence of anaplastic large cell lymphoma has increased with the use of textured implants. Remarkably, the autoimmune response to these implants remains unclear. Therefore, close follow-up, careful observation of any symptom presentation, and evidence-based treatment decisions are necessary for patients with breast implants.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-05-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"49523695","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-11DOI: 10.3390/surgeries3020012
Catarina Soares, Pedro Martins, Elisabete Silva, L. Hympanova, R. Rynkevic
The diagnosis and treatment of pelvic organ prolapse (POP) remain a relevant and scientifically challenging topic. The number of cases of genital prolapse increases each year, one in ten women need at least one surgical procedure and one in four women in midlife have asymptomatic prolapse. Using mesh implants to correct POP presents unsatisfactory clinical outcomes, requiring hospital readmission and further surgery. We hypothesize using an alternative surgical intervention technique, applying injectable biodegradable cog threads, currently used for face lifting procedures, to reinforce and correct vaginal wall defects. The threads used in this investigation are commercially available 360° 4D barb threads (PCL-19G-100), made of polycaprolactone (PCL), supplied in sterile packs (Yastrid, Shanghai, China). Eleven sows’ vaginal walls were used to analyze the immediate reinforcement effect of the threads. Uniaxial tensile testing and scanning electron microscopy (SEM) was performed for the initial characterization of the threads. Threads were inserted into the vaginal wall (control n = 5, cog n = 5) and were characterized by ball burst testing; a pull-out test was performed (n = 6). With SEM images, dimensions, such as thread diameter (≈630 µm), cut angle (≈135°), cut depth (≈200 µm) and cog distance (≈1600 µm) were measured. The mechanical behavior during uniaxial tensile testing was nonlinear. Threads could sustain 17–18 N at 18–22% of deformation. During the ball burst test, vaginal tissue reinforced with threads could support 68 N more load than normal tissue (p < 0.05), indicating its strengthening effect. Comfort and stress zones were significantly stiffer in the tissues reinforced with threads (p < 0.05; p < 0.05). Both groups showed identical deformation (elongation); no significant differences in the comfort zone length were observed, showing that threads do not affect tissue compliance. The pull-out test showed that the threads could sustain 3.827 ± 0.1891 N force when the first cog slip occurs, at 11.93 ± 0.8291 mm. This preliminary research on using PCL cog threads for POP treatment showed promising results in increased vaginal wall resistance to pressure load and, at the same time, not affecting its compliance. Nevertheless, to obtain long term host response in vivo, further investigation will be carried out.
{"title":"Cog Threads for Transvaginal Prolapse Repair: Ex-Vivo Studies of a Novel Concept","authors":"Catarina Soares, Pedro Martins, Elisabete Silva, L. Hympanova, R. Rynkevic","doi":"10.3390/surgeries3020012","DOIUrl":"https://doi.org/10.3390/surgeries3020012","url":null,"abstract":"The diagnosis and treatment of pelvic organ prolapse (POP) remain a relevant and scientifically challenging topic. The number of cases of genital prolapse increases each year, one in ten women need at least one surgical procedure and one in four women in midlife have asymptomatic prolapse. Using mesh implants to correct POP presents unsatisfactory clinical outcomes, requiring hospital readmission and further surgery. We hypothesize using an alternative surgical intervention technique, applying injectable biodegradable cog threads, currently used for face lifting procedures, to reinforce and correct vaginal wall defects. The threads used in this investigation are commercially available 360° 4D barb threads (PCL-19G-100), made of polycaprolactone (PCL), supplied in sterile packs (Yastrid, Shanghai, China). Eleven sows’ vaginal walls were used to analyze the immediate reinforcement effect of the threads. Uniaxial tensile testing and scanning electron microscopy (SEM) was performed for the initial characterization of the threads. Threads were inserted into the vaginal wall (control n = 5, cog n = 5) and were characterized by ball burst testing; a pull-out test was performed (n = 6). With SEM images, dimensions, such as thread diameter (≈630 µm), cut angle (≈135°), cut depth (≈200 µm) and cog distance (≈1600 µm) were measured. The mechanical behavior during uniaxial tensile testing was nonlinear. Threads could sustain 17–18 N at 18–22% of deformation. During the ball burst test, vaginal tissue reinforced with threads could support 68 N more load than normal tissue (p < 0.05), indicating its strengthening effect. Comfort and stress zones were significantly stiffer in the tissues reinforced with threads (p < 0.05; p < 0.05). Both groups showed identical deformation (elongation); no significant differences in the comfort zone length were observed, showing that threads do not affect tissue compliance. The pull-out test showed that the threads could sustain 3.827 ± 0.1891 N force when the first cog slip occurs, at 11.93 ± 0.8291 mm. This preliminary research on using PCL cog threads for POP treatment showed promising results in increased vaginal wall resistance to pressure load and, at the same time, not affecting its compliance. Nevertheless, to obtain long term host response in vivo, further investigation will be carried out.","PeriodicalId":93623,"journal":{"name":"Surgeries","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2022-05-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47146364","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：