Acta odontologica latinoamericana : AOL最新文献

Fiber-reinforced prefabricated intraarticular posts have gained popularity due to several favorable characteristics for clinical use compared to metallic intraradicular posts.

Aim: To evaluate the light transmission capacity of two types of fiber posts, using two different methods.

Materials and method: The posts were divided into two groups: experimental group - quartz-glass fiber posts (n=10) and control group - glass fiber posts (n=10). The light transmittance of the samples was compared by means of light intensity test by photographs and ultraviolet-visible spectrophotometer. This test was analyzed by thirds: coronal, middle, and apical. The spectophotometer tested the luminous transmittance along the length of the post. The statistical analysis was conducted with a significance level of 0.05.

Results: Light transmission was 97% on the coronal third, 68% in the middle third, and 27.66% in the apical third in the posts of the experimental group. In the posts of the control group, the light transmission was 95.33% in the coronal third, 80.66% in the middle third, and 41.33% in the apical third. Light transmission was significantly higher in the middle third of the posts of the experimental group when compared to the control group (p<0.05). The luminous transmittance of the posts of the experimental group was 97.4% with wavelengths of 400 nm, 97% at 450 and 500 nm, and 96.9% at 550 nm. In the posts of the control group, the luminous transmittance was 72.3% with wavelengths of 400 nm, 68.6% at 450 nm; 64.6% at 500 nm and 61.5% at 550 nm. The posts of the experimental group demonstrated significantly higher light transmittance than the control group (p<0.001).

The oral cavity constitutes a unique ecosystem with highly variable ecological niches that harbor a great variety of microorganisms, including yeasts. Molecular methods are currently considered the gold standard for identifying species, although they involve limitations associated with the disruption of yeast cell walls to release the genomic DNA (gDNA) for amplification.

Aim: The aim of this study was to compare the performance of different methods for extracting gDNA from Candida albicans and Candida dubliniensis, subsequently amplifying DNA by PCR.

Materials and method: Fifty-two isolates (16 C. albicans and 36 C. dubliniensis) were obtained from subgingival biofilm of HIV+ patients with clinical signs of periodontal disease. The study evaluated 6 gDNA extraction methods and two PCR amplification methods. Furthermore, the presence of alleles of HWP1 gene was determined in C. albicans.

Results: Comparisons of six methods show statistically significant differences (p <0.001) except for C. albicans in two of them. For C. dubliniensis, statistical differences were observed in all comparisons. Commercial methods were more efficient for concentrating gDNA than in-house methods, and both PCRs were effective. Ten heterozygous C. albicans isolates for this allele were positive for the HWP1-1 / HWP1-2 allele, one was homozygous for Wild Type HWP1-1 allele, and 5 were homozygous for novel/rare HWP1-2 allele.

Conclusions: This study aims to provide simple, inexpensive strategies for phenotypic identification and molecular confirmation of Candida albicans and Candida dubliniensis for non-reference laboratories with low complexity and/or low budgets.

During the manufacture of ceramic restorations there is an important step of finishing and polishing and the effects of different types of these procedures on the surface characteristics of ceramics are not known for sure.

Aim: To evaluate the effects of various surface treatments and immersion in coloring substances on the roughness, microhardness, and color stability of CAD-CAM monolithic ceramics.

Materials and method: The ceramics used were lithium disilicate reinforced with zirconium dioxide (Suprinity), lithium disilicate (E.max) or leucite (Empress). They were subjected to two surface treatments: glazing (group G) (n=20) or mechanical polishing (group P) (n=20). Then they were divided into two subgroups (n=10) to be treated with the staining substance (coffee or water). Roughness, microhardness and color were measured before and after treatment. Data were subjected to analysis of variance and multiple comparisons were performed with Tukey tests at 5% significance level.

Results: Roughness was lower in all tested ceramics after polishing than after glazing. Microhardness was the same for polished and glazed E.max, higher in glazed than polished Empress, and higher in polished than glazed Suprinity. Analysis of the effects of glazing and polishing on the individual ceramics showed that the ΔE2000 and ΔWID data of the E.max ceramic subjected to polishing showed greater change. Mechanical polishing is a good option for surface treatment of monolithic ceramics.

Conclusion: Glazing was inferior and less satisfactory than polishing. Glazing generates changes that can lead to color instability.

Aim: This study evaluated cytotoxicity and antioxidant gene expression of resin cements on human gingival fibroblasts (hGF).

Materials and method: RelyX Ultimate™(RXU), Variolink™II(VLII), and RelyXU200™(RXU200) resin cements were incubated with culture medium for 24 h to obtain eluates. Then, the eluates were applied over hGF to assess cell viability at 24 h, 48 h, and 72 h and antioxidant gene expression at 24 h. hGF cultures non-exposed to the eluates were used as Control. Data were submitted to ANOVA and Bonferroni tests (α≤0.05).

Results: RXU and RXU200 reduced the number of viable cells in 24 h. Longer exposure to cement extracts caused cell death. Gene expression showed peroxiredoxin 1 (PRDX1) induction by all resin cement types, and superoxide dismutase 1 (SOD1) induction by RXU200 and VLII. Moreover, RXU200 induced not only PRDX1 and SOD1, but also glutathione peroxidase 1 (GPX1), catalase (CAT), and glutathione synthetase (GSS).

Conclusions: All resin cements showed toxicity, and induced antioxidant genes in hGF. Antioxidant gene induction is at least partly associated with cytotoxicity of tested cements to oxidative stress experience.

Based on its mechanical properties, PEEK (polyether-ether-ketone) might be useful in restorative procedures. In oral rehabilitation, its viability has been studied mainly for prostheses and dental implants.

Aim: The aim of this study was to evaluate the fit accuracy of dental implant bars made of either PEEK or cobalt-chrome submitted to cycling mechanics.

Materials and method: This was an experimental in vitro study, where units were treated with two implants and mini-abutments, joined by cobalt-chrome or polyether-ether-ketone PEEK bars. A total 20 bars were prepared (n=10 per group) and subjected to mechanical cycling tests (1 million cycles on the distal cantilever of the bar in the vertical direction, 120N and sinusoidal loading, at a frequency of 2Hz). The fit at the abutment/implant interface was measured before and after cycling, and the counter-torque of the vertical screw of the mini abutments was measured after cycling, using a digital torquemeter. Data were analyzed by three-way ANOVA and Tukey's test at 5% significance level.

Results: No statistically significant interaction was found among the three factors considered (bar material, implant positioning and mechanical cycling) (p = 0.592). No significant difference was identified in the interaction between bar material and implant positioning (p = 0.321), or between implant positioning and mechanical cycling (p = 0.503). The association between bar material and mechanical cycling was statistically significant (p = 0.007), with the cobalt-chrome bar resulting in greater misfit with mechanical cycling. There was no difference in counter-torque values between groups.

Conclusions: The PEEK bar provided better fit of the mini abutments to the implants, even after mechanical cycling. The counter-torque of the screws was similar in all scenarios considered.