Current Protocols in Cytometry最新文献

Extracellular vesicles (EVs) are continuously released by most cells, and they carry surface markers of their cells of origin. Found in all body fluids, EVs function as conveyers of cellular information, and evidence implicates them as markers of disease. These characteristics make EVs attractive diagnostic targets. However, detection and characterization of EVs is challenging due to their small size. We've established a method, called ExoPLA, that allows individual EVs to be detected and characterized at high specificity and sensitivity. Based on the in situ proximity ligation assay (in situ PLA), proximal oligonucleotide-conjugated antibodies bound to their targets on the surfaces of the EVs allow formation of circular products that can be fluorescently labeled by rolling circle amplification. The intense fluorescent signals produced in this assay allow detection and enumeration of individual EVs by flow cytometry. We describe the procedures for ExoPLA, along with expected results and troubleshooting. © 2017 by John Wiley & Sons, Inc.

Super-resolution (SR) fluorescence microscopy, a class of optical microscopy techniques at a spatial resolution below the diffraction limit, has revolutionized the way we study biology, as recognized by the Nobel Prize in Chemistry in 2014. Stochastic optical reconstruction microscopy (STORM), a widely used SR technique, is based on the principle of single molecule localization. STORM routinely achieves a spatial resolution of 20 to 30 nm, a ten-fold improvement compared to conventional optical microscopy. Among all SR techniques, STORM offers a high spatial resolution with simple optical instrumentation and standard organic fluorescent dyes, but it is also prone to image artifacts and degraded image resolution due to improper sample preparation or imaging conditions. It requires careful optimization of all three aspects—sample preparation, image acquisition, and image reconstruction—to ensure a high-quality STORM image, which will be extensively discussed in this unit. © 2017 by John Wiley & Sons, Inc.

Novel cell analyzers, including polychromatic flow cytometers and isotopical cytometry by time of flight (CyTOF) mass cytometers, enable simultaneous measurement of virtually bondless characteristics at the single-cell level. BrdU assays for quantifying cellular proliferation are common but have several limitations, including the need for a DNA denaturation step and inability to simultaneously resolve multiple parameters and phenotypic complexity. Click chemistry reactions have become popular in the past decade, as they can resolve these issues. This protocol introduces a novel assay able to bridge flow cytometry and CyTOF analysis for active S-phase determination in cell cycle applications, combining well-established click chemistry with a novel iodo-deoxyuridine (IdU) azide derivative and a cross-reactive anti-IdU antibody for detecting incorporated EdU during DNA synthesis. This method is preferred over traditional BrdU-based assays for complex and multiparametric experiments. It provides a feasible cost-effective approach for detecting ethynyl-labeled nucleotides, with the advantage of combining flow and mass cytometry analyses. © 2017 by John Wiley & Sons, Inc.

Fluorescence-lifetime imaging microscopy (FLIM) is a technique to generate images, in which the contrast is obtained by the excited-state lifetime of fluorescent molecules instead of their intensity and emission spectrum. The ubiquitous coenzymes NADH and NADPH, hereafter NAD(P)H, in cells show a short fluorescence lifetime ≈︀400 psec in the free-state and a longer fluorescence lifetime when bound to enzymes. The fluorescence lifetime of NAD(P)H in this state depends on the binding-site on the specific enzyme. In the case of NADPH bound to members of the NADPH oxidases family we measured a fluorescence lifetime of 3650 psec as compared to enzymes typically active in cells, in which case fluorescence lifetimes of ∼2000 psec are measured. Here we present a robust protocol based on NAD(P)H fluorescence lifetime imaging in isolated cells to distinguish between normally active enzymes and NADPH oxidases, mainly responsible for oxidative stress. © 2017 by John Wiley & Sons, Inc.

The ability to correlate fluorescence microscopy (FM) and electron microscopy (EM) data obtained on biological (cell and tissue) specimens is essential to bridge the resolution gap between the data obtained by these different imaging techniques. In the past such correlations were limited to either EM navigation in two dimensions to the locations previously highlighted by fluorescence markers, or subsequent high-resolution acquisition of tomographic information using a TEM. We present a novel approach whereby a sample previously investigated by FM is embedded and subjected to sequential mechanical polishing and backscatter imaging by scanning electron microscope. The resulting three dimensional EM tomogram of the sample can be directly correlated to the FM data. © 2017 by John Wiley & Sons, Inc.

Fluorescent proteins have become standard tools for cell and molecular biologists. The color palette of fluorescent proteins spans the ultraviolet, visible, and near-infrared spectrum. Utility of fluorescent proteins has been greatly facilitated by the availability of compact and affordable solid state lasers capable of providing various excitation wavelengths. In theory, the plethora of fluorescent proteins and lasers make it easy to detect multiple fluorescent proteins simultaneously. However, in practice, heavy spectral overlap due to broad excitation and emission spectra presents a challenge. In conventional flow cytometry, careful selection of excitation wavelengths and detection filters is necessary. Spectral flow cytometry, an emerging methodology that is not confined by the “one color, one detector” paradigm, shows promise in the facile detection of multiple fluorescent proteins. This chapter provides a synopsis of fluorescent protein development, a list of commonly used fluorescent proteins, some practical considerations and strategies for detection, and examples of applications. © 2017 by John Wiley & Sons, Inc.

The clinical use of flow cytometric DNA ploidy assay has been extended towards stratifying the risk of diseases, such as monoclonal gammopathies or B cell acute lymphoblastic leukemia, and to detect circulating tumor cells, both of which require detection of minute cell populations. This unit describes a protocol for determining DNA ploidy in fixed samples with simultaneous surface immunophenotyping. It is an easy method for simultaneous 6- to 8-color immunophenotyping and DNA content analysis using FxCycle Violet (FCV; DAPI) dye. This protocol is a one-step modification of routine multicolor immunophenotyping that includes surface staining followed by fixation and then DNA staining with FCV. It utilizes mature lymphocytes from the sample as an internal control for determination of DNA index. It is a sensitive method that allows DNA-ploidy determination and cell cycle analysis in a rare tumor population as low as 100 events, as well as DNA ploidy determination in various subsets of hematopoietic cells in the same sample based on their immunophenotype. © 2017 by John Wiley & Sons, Inc.

Quantifying the efficiency of particle uptake by host cells is important in the fields of infectious diseases, autoimmunity, cancer, developmental biology, and drug delivery. Here we present a protocol for high-throughput analysis of particle uptake by imaging flow cytometry, using the bacterium Neisseria gonorrhoeae attached to and internalized by neutrophils as an example. Cells are exposed to fluorescently labeled bacteria, fixed, and stained with a bacteria-specific antibody of a different fluorophore. Thus, in the absence of a permeabilizing agent, extracellular bacteria are double-labeled with two fluorophores while intracellular bacteria remain single-labeled. A spot count algorithm is used to determine the number of single- and double-labeled bacteria in individual cells, to calculate the percent of cells associated with bacteria, percent of cells with internalized bacteria, and percent of cell-associated bacteria that are internalized. These analyses quantify bacterial association and internalization across thousands of cells and can be applied to diverse experimental systems. © 2017 by John Wiley & Sons, Inc.

Telomere sequences at the end of chromosomes control somatic cell division; therefore, telomere length in a given cell population provides information about its replication potential. This unit describes a method for flow cytometric measurement of telomere length in subpopulations using fluorescence in situ hybridization of fluorescently-labeled probes (Flow-FISH) without prior cell separation. After cells are stained for surface immunofluorescence, antigen-antibody complexes are covalently cross-linked onto cell membranes before FISH with a telomere-specific probe. Cells with long telomeres are included as internal standards. Addition of a DNA dye permits exclusion of proliferating cells during data analysis. DNA ploidy measurements of cells of interest and internal standard are performed on separate aliquots in parallel to Flow-FISH. Telomere fluorescence of G_0/1 cells of subpopulations and internal standards obtained from Flow-FISH are normalized for DNA ploidy, and telomere length in subsets of interest is expressed as a fraction of the internal standard telomere length. © 2017 by John Wiley & Sons, Inc.

Because flow cytometers are designed to measure particle characteristics, particles are the most common materials used to calibrate, control, and standardize the instruments. Definitions and cautions are provided for common terms to alert the reader to critical distinctions in meaning. This unit presents extensive background on particle types and cautions and describes practical aspects of methods to standardize and calibrate instruments. Procedures are provided to characterize performance in terms of optical alignment, fluorescence and light scatter resolution, and sensitivity. Finally, suggestions follow for analyzing particles used for calibration. © 2017 by John Wiley & Sons, Inc.