Many schools have implemented information systems that can make it easier for users to access the required data. However, SMPN 1 Percut Sei Tuan still uses manual methods to manage academic and non-academic data which causes the process of delivering academic and non-academic information there to not run optimally and lack of academic and non-academic communication between teachers and students. Based on this background, a school management information system was built as an effort to increase the effectiveness of academic and non-academic management at SMPN 1 Percut Sei Tuan.
许多学校已经实施了信息系统，使用户可以更容易地访问所需的数据。然而，SMPN 1 Percut Sei Tuan仍然使用手工方法来管理学术和非学术数据，这导致学术和非学术信息的传递过程不能优化运行，教师和学生之间缺乏学术和非学术交流。在此背景下，我们建立了一个学校管理信息系统，以提高smp1percut Sei Tuan的学术和非学术管理效率。
{"title":"PEMBANGUNAN SISTEM INFORMASI MANAJEMEN SEKOLAH BERBASIS WEB GUNA MENINGKATKAN EFEKTIFITAS PENGELOLAAN AKADEMIK DAN NON AKADEMIK PADA SMPN 1 PERCUT SEI TUAN","authors":"Ilka Zufria, Raissa Amanda Putri, Roscahyati Ritonga","doi":"10.30829/jistech.v7i1.12089","DOIUrl":"https://doi.org/10.30829/jistech.v7i1.12089","url":null,"abstract":"Many schools have implemented information systems that can make it easier for users to access the required data. However, SMPN 1 Percut Sei Tuan still uses manual methods to manage academic and non-academic data which causes the process of delivering academic and non-academic information there to not run optimally and lack of academic and non-academic communication between teachers and students. Based on this background, a school management information system was built as an effort to increase the effectiveness of academic and non-academic management at SMPN 1 Percut Sei Tuan.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130993034","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-30DOI: 10.30829/jistech.v7i1.12090
Sahdinal Adi, M. Masthura, Abdul Halim Daulay
This research was conducted to utilize durian seed waste into activated carbon and aims to identify the characteristics of the durian seed activated carbon produced from the activation temperature alteration. With an experimental method with a quantitative approach, the process of making durian seed activated carbon was tested by carbonization using an oven at a temperature of 200 oC for 180 minutes, then temperature activation with alterations of 500, 600, and 700 oC was held for 120 minutes in the furnace, and after it was added with chemical activation by using a 1,5 M H2SO4 solution for 24 hours of immersion. The analysis seen is to test the water content, volatile matter content, ash content, bound carbon content, and to see the surface morphology of activated carbon using SEM (Scanning Electron Microscopy). The results of the test obtained values for water content (6,83 – 12,73%), volatile matter content (16,98 – 26,89%), ash content (7,85 – 12,04%), bound carbon content(61,66 – 75,17%), with an increase in the activation temperature there is a tendency to decrease the value of water content, volatile matter content, ash content, and there is an increase in the value of bound carbon content. And visible cavities on the surface of the activated carbon along with the increase in activation temperature.
{"title":"PENGARUH SUHU AKTIVASI TERHADAP KUALITAS KARBON AKTIF BIJI DURIAN","authors":"Sahdinal Adi, M. Masthura, Abdul Halim Daulay","doi":"10.30829/jistech.v7i1.12090","DOIUrl":"https://doi.org/10.30829/jistech.v7i1.12090","url":null,"abstract":"This research was conducted to utilize durian seed waste into activated carbon and aims to identify the characteristics of the durian seed activated carbon produced from the activation temperature alteration. With an experimental method with a quantitative approach, the process of making durian seed activated carbon was tested by carbonization using an oven at a temperature of 200 oC for 180 minutes, then temperature activation with alterations of 500, 600, and 700 oC was held for 120 minutes in the furnace, and after it was added with chemical activation by using a 1,5 M H2SO4 solution for 24 hours of immersion. The analysis seen is to test the water content, volatile matter content, ash content, bound carbon content, and to see the surface morphology of activated carbon using SEM (Scanning Electron Microscopy). The results of the test obtained values for water content (6,83 – 12,73%), volatile matter content (16,98 – 26,89%), ash content (7,85 – 12,04%), bound carbon content(61,66 – 75,17%), with an increase in the activation temperature there is a tendency to decrease the value of water content, volatile matter content, ash content, and there is an increase in the value of bound carbon content. And visible cavities on the surface of the activated carbon along with the increase in activation temperature.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129898020","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-30DOI: 10.30829/jistech.v7i1.12088
Rita Sari Dewi, Ilka Zufria, M. Fakhriza
In the process of determining student beneficiaries using the manual method, it can affect time efficiency and data accuracy. By using a systematic calculation using a decision support system (DSS) that combines expert methods and SAW the resulting data can be used as an alternative to determine students who receive assistance to produce accurate data. In this case, the decision support system uses criteria, namely final semester grades, parental income, certificates, number of dependents and smart indonesia cards. This system is built on a web-based basis using the PHP programming language and Mysql database. The final result of this system can display ranking data and a combination of two methods. The resulting data can be printed in the form of a report. The resulting report can be used as a recommendation in the decision-making process regarding students who are entitled to receive educational assistance.
{"title":"PENENTUAN SISWA PENERIMA BANTUAN PENDIDIKAN MENGGUNAKAN METODE AHP DAN SAW","authors":"Rita Sari Dewi, Ilka Zufria, M. Fakhriza","doi":"10.30829/jistech.v7i1.12088","DOIUrl":"https://doi.org/10.30829/jistech.v7i1.12088","url":null,"abstract":"In the process of determining student beneficiaries using the manual method, it can affect time efficiency and data accuracy. By using a systematic calculation using a decision support system (DSS) that combines expert methods and SAW the resulting data can be used as an alternative to determine students who receive assistance to produce accurate data. In this case, the decision support system uses criteria, namely final semester grades, parental income, certificates, number of dependents and smart indonesia cards. This system is built on a web-based basis using the PHP programming language and Mysql database. The final result of this system can display ranking data and a combination of two methods. The resulting data can be printed in the form of a report. The resulting report can be used as a recommendation in the decision-making process regarding students who are entitled to receive educational assistance.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132354786","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-30DOI: 10.30829/jistech.v7i1.12084
Abdul Halim Daulay, M. Masthura, Heni Puspita Sari
Research has been done on the physicl test of charcoal briquettes made from tea stems (Camellia sinensis). This study aims to determine the physical characteristics of the charcoaI briquettes produced. This research is motivated by the increasing demand for human fuel, thus utilizing tea stems as the main ingredient in making briquettes. The sample variations used were tea tree trunk charcoaI and tapioca adhesive as an adhesive with a ratio of 90%:I0%, 80%:20%, 70%:30%, 60%:40%, and 50%:50%. The physical test carried out included water content, density, and calorific value. The results obtained from the physical test of biochar briquettes with the best quality approaching the quality standards of Indonesian briquettes were obtained on sample with a composition (70%:30%) with the value of water content, density, and calorific value, each of which was 5 .70%, 0.55 g/cm3, and (-) 7.62 cal/g.
{"title":"UJI FISIS BRIKET BIOARANG BERBAHAN BATANG TEH (CAMELLIA SINENSIS)","authors":"Abdul Halim Daulay, M. Masthura, Heni Puspita Sari","doi":"10.30829/jistech.v7i1.12084","DOIUrl":"https://doi.org/10.30829/jistech.v7i1.12084","url":null,"abstract":"Research has been done on the physicl test of charcoal briquettes made from tea stems (Camellia sinensis). This study aims to determine the physical characteristics of the charcoaI briquettes produced. This research is motivated by the increasing demand for human fuel, thus utilizing tea stems as the main ingredient in making briquettes. The sample variations used were tea tree trunk charcoaI and tapioca adhesive as an adhesive with a ratio of 90%:I0%, 80%:20%, 70%:30%, 60%:40%, and 50%:50%. The physical test carried out included water content, density, and calorific value. The results obtained from the physical test of biochar briquettes with the best quality approaching the quality standards of Indonesian briquettes were obtained on sample with a composition (70%:30%) with the value of water content, density, and calorific value, each of which was 5 .70%, 0.55 g/cm3, and (-) 7.62 cal/g.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125624027","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-06-30DOI: 10.30829/jistech.v7i1.12085
Mardiah Ramadhani, Ilka Zufria
The rapid development of internet technology can be felt and is very much needed in numerous industries of company when it comes to selling their products online. Marketplace is an e-commerce service that connects merchants and customers online to handle buying and selling transactions, such as creating a marketplace application. This marketplace can assist businesses in offering their products and competing in a healthy manner, one of which is the Umrah and Hajj travel agency business. The Umrah and Hajj travel marketplace can assist travel companies in marketing their products, prospective pilgrims have many travel options and desired departure packages, and prospective pilgrims can order packages online and in real time using this application. This program also has a pleasing appearance and gives menus and options to assist the congregation in doing their worship. The umrah and hajj travel application is an android-based application built using the dart programming language, flutter framework, and MySQL database used for data storage.
{"title":"PENERAPAN FRAMEWORK FLUTTER DALAM MEMBANGUN APLIKASI MARKETPLACE TRAVEL UMROH DAN HAJI BERBASIS ANDROID","authors":"Mardiah Ramadhani, Ilka Zufria","doi":"10.30829/jistech.v7i1.12085","DOIUrl":"https://doi.org/10.30829/jistech.v7i1.12085","url":null,"abstract":"The rapid development of internet technology can be felt and is very much needed in numerous industries of company when it comes to selling their products online. Marketplace is an e-commerce service that connects merchants and customers online to handle buying and selling transactions, such as creating a marketplace application. This marketplace can assist businesses in offering their products and competing in a healthy manner, one of which is the Umrah and Hajj travel agency business. The Umrah and Hajj travel marketplace can assist travel companies in marketing their products, prospective pilgrims have many travel options and desired departure packages, and prospective pilgrims can order packages online and in real time using this application. This program also has a pleasing appearance and gives menus and options to assist the congregation in doing their worship. The umrah and hajj travel application is an android-based application built using the dart programming language, flutter framework, and MySQL database used for data storage.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134256576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-01-07DOI: 10.30829/jistech.v6i2.10014
M. Masthura, Abdul Halim Daulay, Lansari Daulay
Research using the electrocoagulation method has been carried out to determine the results of the sample test results for BOD and COD parameters in palm oil mill effluent. The electrodes used n this method are aluminium electrodes with varying adapter voltages of 6, 9, and 12 Volts. Palm oil liquid waste used comes from PTPN IV Adolina Perbaungan. The results of the study showed that before the electrocoagulation method the BOD value obtained was 243 mg/l, while after the electrocoagulation method the best results were obtained at a voltage of 12 Volt with a value of 52,5 mg/l. The value obtained before the electorocoagulation method was carried out on the COD parameter was 649 mg/l and after the electrocoagulation method the best results were obtained at a voltage of 12 Volt, which was 110 mg/l. This shows that the parameter values of BOD and COD in processed waste have decreased and meet the wastewater quality standards for the palm oil industry, namelyb 100 mg/l and 350 mg/l. The higher the value of the applied voltage, the more optimal the levels of BOD and COD.
采用电絮凝法对棕榈油厂出水的BOD和COD参数进行了样品测试结果的确定研究。这种方法中使用的电极是铝电极，适配器电压为6、9和12伏。使用的棕榈油废液来自PTPN IV Adolina Perbaungan。研究结果表明，电絮凝法前得到的BOD值为243 mg/l，电絮凝法后得到的BOD值在12伏电压下达到最佳，为52.5 mg/l。电絮凝法处理COD参数前的值为649 mg/l，电絮凝法处理后的最佳电压为12伏，为110 mg/l。由此可见，处理后的废水中BOD和COD的参数值有所下降，达到了棕榈油行业的废水水质标准，即100 mg/l和350 mg/l。施加电压值越高，BOD和COD水平越理想。
{"title":"PENURUNAN KANDUNGAN BOD DAN COD LIMBAH CAIR KELAPA SAWIT MENGGUNAKAN METODE ELEKTROKOAGULASI","authors":"M. Masthura, Abdul Halim Daulay, Lansari Daulay","doi":"10.30829/jistech.v6i2.10014","DOIUrl":"https://doi.org/10.30829/jistech.v6i2.10014","url":null,"abstract":"Research using the electrocoagulation method has been carried out to determine the results of the sample test results for BOD and COD parameters in palm oil mill effluent. The electrodes used n this method are aluminium electrodes with varying adapter voltages of 6, 9, and 12 Volts. Palm oil liquid waste used comes from PTPN IV Adolina Perbaungan. The results of the study showed that before the electrocoagulation method the BOD value obtained was 243 mg/l, while after the electrocoagulation method the best results were obtained at a voltage of 12 Volt with a value of 52,5 mg/l. The value obtained before the electorocoagulation method was carried out on the COD parameter was 649 mg/l and after the electrocoagulation method the best results were obtained at a voltage of 12 Volt, which was 110 mg/l. This shows that the parameter values of BOD and COD in processed waste have decreased and meet the wastewater quality standards for the palm oil industry, namelyb 100 mg/l and 350 mg/l. The higher the value of the applied voltage, the more optimal the levels of BOD and COD.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"41 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-01-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132362823","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-01-07DOI: 10.30829/jistech.v6i2.10819
Hafizah Safwani, Suendri Suendri, Triase Triase
Students in grades 4-5 Elementary School Al-Ikhlas need an Android-based application to find the meaning of the Qur'anic verses to help and make it easier for students to find the meaning of the verses of the Qur'an and do the tasks given by Islamic Religion Teachers. Making the application's search for meaning verses of Qur'an using methods matching string (string matching) that is implemented in the search process said. String matching will perform the search process for a string or several strings found in a text or string. The algorithm used in string matching is berry ravindran, this algorithm has 2 phases, namely the preprocessing phase and the search phase. The phase preprocessing serves to create a shift value that will be used in the search phase. The value of the search phase is obtained from the rules of the algorithm. The Algorithm is berry ravindran implemented to perform analysis string matching in the application of finding the meaning of the verses of the Qur'an. This application to search for the meaning of the verses of the Qur'an can search for the meaning of the verses of the Qur'an by using voice, it is hoped that this voice search feature can facilitate the search for the meaning of the verses of the Qur'an. Speech recognition is implemented using one of the Google Cloud Platforms, namely the Google Speech API to detect spoken words when searching, so that it can make it easier for users to search for the meaning of the verses of the Qur'an. It is hoped that this application can be used as a source of knowledge and useful for grade 4-5 students at Elementary School Al-Ikhlas so that they are more diligent in reading the Qur'an and finding out the meaning of the verse, in order to guide them to the right path to the path that is pleasing to Allah.
{"title":"PENCARIAN ARTI AYAT AL-QUR’AN DENGAN SPEECH RECOGNITION MENGGUNAKAN ALGORITMA BERRY RAVINDRAN BERBASIS ANDROID","authors":"Hafizah Safwani, Suendri Suendri, Triase Triase","doi":"10.30829/jistech.v6i2.10819","DOIUrl":"https://doi.org/10.30829/jistech.v6i2.10819","url":null,"abstract":"Students in grades 4-5 Elementary School Al-Ikhlas need an Android-based application to find the meaning of the Qur'anic verses to help and make it easier for students to find the meaning of the verses of the Qur'an and do the tasks given by Islamic Religion Teachers. Making the application's search for meaning verses of Qur'an using methods matching string (string matching) that is implemented in the search process said. String matching will perform the search process for a string or several strings found in a text or string. The algorithm used in string matching is berry ravindran, this algorithm has 2 phases, namely the preprocessing phase and the search phase. The phase preprocessing serves to create a shift value that will be used in the search phase. The value of the search phase is obtained from the rules of the algorithm. The Algorithm is berry ravindran implemented to perform analysis string matching in the application of finding the meaning of the verses of the Qur'an. This application to search for the meaning of the verses of the Qur'an can search for the meaning of the verses of the Qur'an by using voice, it is hoped that this voice search feature can facilitate the search for the meaning of the verses of the Qur'an. Speech recognition is implemented using one of the Google Cloud Platforms, namely the Google Speech API to detect spoken words when searching, so that it can make it easier for users to search for the meaning of the verses of the Qur'an. It is hoped that this application can be used as a source of knowledge and useful for grade 4-5 students at Elementary School Al-Ikhlas so that they are more diligent in reading the Qur'an and finding out the meaning of the verse, in order to guide them to the right path to the path that is pleasing to Allah.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-01-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122148051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-31DOI: 10.30829/jistech.v6i2.11440
Rahmasari Pohan, M. Masthura, Abdul Halim Daulay
The need for an electrical energy source is currently a very necessary thing, therefore researchers conducted experiments on the use of pineapple peel (ananas comosus) extract as an electrolyte solution with a variety of electrodes. This research was conducted with the aim of generating voltage, electric current, and strength values. The measure of the holding capacity of the solution used were 50 ml, 100 ml, 150 ml, 200 ml, and 250 ml. The electrodes to be used are in the form of copper-zinc, copper-iron, and copper-aluminum pairs with each plate measurement of 4 cm × 7 cm, thickness of 0.2 mm. To determine the magnitude of the value of the voltage and current, a resistance is given in the form of an LED lamp. Based on the results of the research the pH measurement of the solution was 3.9. The test results obtained by the pair of Cu:Zn plates are the best compared to other pairs of plates, namely by producing a voltage of 1.59 Volts, a current of 0.28 mA, and an strength values of 0.44 mW with a volume of 250 ml. This is due to the influence of the volume of the solution and the electrodes used, that the more plates submerged in the solution, the greater the energy produced.
{"title":"PENGARUH VARIASI ELEKTRODA TERHADAP KELISTRIKAN SARI KULIT NENAS (ANANAS COMOSUS) SEBAGAI BIOBATERAI","authors":"Rahmasari Pohan, M. Masthura, Abdul Halim Daulay","doi":"10.30829/jistech.v6i2.11440","DOIUrl":"https://doi.org/10.30829/jistech.v6i2.11440","url":null,"abstract":"The need for an electrical energy source is currently a very necessary thing, therefore researchers conducted experiments on the use of pineapple peel (ananas comosus) extract as an electrolyte solution with a variety of electrodes. This research was conducted with the aim of generating voltage, electric current, and strength values. The measure of the holding capacity of the solution used were 50 ml, 100 ml, 150 ml, 200 ml, and 250 ml. The electrodes to be used are in the form of copper-zinc, copper-iron, and copper-aluminum pairs with each plate measurement of 4 cm × 7 cm, thickness of 0.2 mm. To determine the magnitude of the value of the voltage and current, a resistance is given in the form of an LED lamp. Based on the results of the research the pH measurement of the solution was 3.9. The test results obtained by the pair of Cu:Zn plates are the best compared to other pairs of plates, namely by producing a voltage of 1.59 Volts, a current of 0.28 mA, and an strength values of 0.44 mW with a volume of 250 ml. This is due to the influence of the volume of the solution and the electrodes used, that the more plates submerged in the solution, the greater the energy produced.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124006268","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-31DOI: 10.30829/jistech.v6i2.11419
Rusdin Halomoan Hsb, Suendri Suendri, M. Fakhriza
Meningitis must be detected as soon as possible, just like any other disease, to give the patient the best chance of recovery. Physical examination, symptoms, what is felt, and the suspected tissue particles are all used to establish the diagnosis of Meningitis. If anything unusual happens, we should consult with specialists who are experts in their field to check the facts and situation. However, some people are more sedentary because they don't know how to treat their illness, or because they believe it's just a symptom of a common illness, or because it's expensive to see a doctor. The lack of public awareness in the field of meningitis, as well as the lack of professionals in the field, makes it difficult to treat people with this disease. Given these circumstances, having a Meningitis detection application system that uses the Dempster Shafer technique to diagnose the type of Meningitis disease based on clinical symptoms is very important. The Dempster Shafer approach will be used to create an expert system application, where the results of previous expert system trials including patient symptoms reveal that this system is capable of diagnosing disease based on symptoms, even when the perceived symptoms are ambiguous. To find out the symptoms experienced by the patient. The application will then inform the public about the symptoms experienced by the patient
{"title":"PENERAPAN METODE DEMPSTER SHAPER DALAM MENDIAGNOSA PENYAKIT MENINGITIS PADA BALITA MENGGUNAKAN FRAMEWORK ANGULAR","authors":"Rusdin Halomoan Hsb, Suendri Suendri, M. Fakhriza","doi":"10.30829/jistech.v6i2.11419","DOIUrl":"https://doi.org/10.30829/jistech.v6i2.11419","url":null,"abstract":"Meningitis must be detected as soon as possible, just like any other disease, to give the patient the best chance of recovery. Physical examination, symptoms, what is felt, and the suspected tissue particles are all used to establish the diagnosis of Meningitis. If anything unusual happens, we should consult with specialists who are experts in their field to check the facts and situation. However, some people are more sedentary because they don't know how to treat their illness, or because they believe it's just a symptom of a common illness, or because it's expensive to see a doctor. The lack of public awareness in the field of meningitis, as well as the lack of professionals in the field, makes it difficult to treat people with this disease. Given these circumstances, having a Meningitis detection application system that uses the Dempster Shafer technique to diagnose the type of Meningitis disease based on clinical symptoms is very important. The Dempster Shafer approach will be used to create an expert system application, where the results of previous expert system trials including patient symptoms reveal that this system is capable of diagnosing disease based on symptoms, even when the perceived symptoms are ambiguous. To find out the symptoms experienced by the patient. The application will then inform the public about the symptoms experienced by the patient","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"283 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134265107","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-12-31DOI: 10.30829/jistech.v6i2.11436
Heru Irfansyah, Suendri Suendri, A. Ikhwan
The GPS Lock method and cloud storage can be applied to the field employee activity monitoring application to be a solution in minimizing the frauds that exist in every employee's job in the field. LOCK GPS can lock the location of employees so that employees can no longer commit dishonesty during absenteeism. To make it easier to monitor employee activities remotely, a menu of employee activity uploads will be provided in the form of photos which will later be completed with the date and time automatically. In harvesting data collection or reports of harvest evidence, a menu is provided to upload photos of the weighing process for harvests and weighing results so that there is no more dishonesty in harvesting data collection. The data for this study were collected through observation, interviews, and relevant literature studies such as journals and books. There are two types of data collected: primary and secondary. By using UML, the steps taken to design the database and describe the workflow of the application to be built. At this stage the author creates an interface that is in accordance with the functions required for the application to be built. RAD (Rapid Application Development) is a system development method used in this research. RAD is a fast-adapted version of the waterfall model that uses a component construction approach.
{"title":"SISTEM MONITORING AKTIVITAS KARYAWAN LAPANGAN DENGAN METODE LOCK GPS BERBASIS CLOUD PADA PTPN II","authors":"Heru Irfansyah, Suendri Suendri, A. Ikhwan","doi":"10.30829/jistech.v6i2.11436","DOIUrl":"https://doi.org/10.30829/jistech.v6i2.11436","url":null,"abstract":"The GPS Lock method and cloud storage can be applied to the field employee activity monitoring application to be a solution in minimizing the frauds that exist in every employee's job in the field. LOCK GPS can lock the location of employees so that employees can no longer commit dishonesty during absenteeism. To make it easier to monitor employee activities remotely, a menu of employee activity uploads will be provided in the form of photos which will later be completed with the date and time automatically. In harvesting data collection or reports of harvest evidence, a menu is provided to upload photos of the weighing process for harvests and weighing results so that there is no more dishonesty in harvesting data collection. The data for this study were collected through observation, interviews, and relevant literature studies such as journals and books. There are two types of data collected: primary and secondary. By using UML, the steps taken to design the database and describe the workflow of the application to be built. At this stage the author creates an interface that is in accordance with the functions required for the application to be built. RAD (Rapid Application Development) is a system development method used in this research. RAD is a fast-adapted version of the waterfall model that uses a component construction approach.","PeriodicalId":142114,"journal":{"name":"JISTech (Journal of Islamic Science and Technology)","volume":"63 8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134027709","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：