Journal of China University of Mining and Technology最新文献

Disassembly and recycling of E-waste creates a series of environmental problems. The selection of a technologically reliable, environmentally friendly, economically affordable and socially acceptable recycling technology for E-waste is a significant question. This study establishes a Monte-Carlo mathematical model of cost minimization, given the constraints of environmentally sound handling of the e-waste, in the context of Crystal Ball risk assessment and evaluation software. By following the streams of the different treatment processes, which consist of various technologies including disassembly, recycling and disposal, the economics of various possibilities were identified and the optimal recycling technology proposed. The key factors of the proposed scenarios were determined by using sensitivity analysis. The results of this study show that, for discarded refrigerators, the operating life span plays the key role. The model supports maintenance and resale of the short lived refrigerators. For the longer lived refrigerators material recycling is recommended by the model. Sensitivity analysis shows that purchase cost, plastic sale price, condenser sale price and disassembly costs are the main effects. This study provides a significant technical support for policy making in E-waste management.

The behavior of stress wave propagation in rock walls and the process of rock bursts were simulated by application tests of material similar to rock. Results show that 1) the attenuation characteristics of stress waves were related to the material properties, stress waves attenuate more quickly in soft material and 2) when the explosion load was applied at the top of the roadway, the number and the length of the cracks increased with a decrease in the distance between the explosive point and roof of the roadway. When the distance was 280 mm, only some chips appeared near the source, when the distance was 210 mm, some small cracks started to appear near the road-rib and when the distance was reduced to 140 mm, larger cracks appeared at the road-rib. It can be concluded that, under a given stress the number of cracks is closely related to the intensity of stress waves. The cracks in the surrounding rock can be reduced by controlling the intensity of the stress waves and rock bursts can be avoided to some extent by preventing the formation of layered crack structures. A new experimental approach has been provided for studying rock bursts by using physical simulation.

Variable temperature and pressure adsorption tests were conducted on four coal samples with different coal ranks, under simulated temperatures and pressures corresponding to coal reservoirs at different depths. The regularity of the variation in the amounts of adsorption by coals under variable temperature and pressure and 30° C isothermal conditions are compared and the adsorption characteristics of coal under the composite effect of temperature and pressure were obtained. The adsorption test and data processing method of coal under variable temperature and pressure are presented and the effect of the mechanism of temperature and pressure on the adsorption capacity of coal has been studied. The research results are of significant importance in the investigation of coalbed methane storage mechanism and for the prediction of the amounts of coalbed methane at various depths.

The room and pillar method is usually used to extract coal from shallowly buried seams with thin bedrock. This results in a very low production efficiency and in a low degree of extraction. In recent years short-wall continuous mechanical mining has been extensively used in many situations except shallowly buried coal seams with thin bedrock. The principles governing movement of the overlying strata above the 2-2 coal seam were deduced from in-situ experience, laboratory data, calculations and computer simulations. The thicknesses of the bedrock in the Shendong Coal Field where the coal is shallowly buried are classified into 5 types: <10 m, 10-15 m, 15-25 m, 25-35 m and >35 m, which was done using fuzzy clustering results. A series of reasonable, relative parameters in each category have been calculated and analyzed. One proposed way to perform short-wall continuous mechanical mining in shallowly buried coal seams is given. This is significant for coal mines with similar geological conditions.

The failure of all 12 blades of an air fan was investigated by metallurgical and mechanical experiments and an examination of the fracture surface. The experimental results show that the cast aluminium-silicon alloy without any modification had a number of material defects, such as coarse grains, a loose structure, a large number of shrinkage holes, a long and thin bold-pin shaped silicon-phase, poor material strength and serious brittleness. In addition, installed on the spindle without elastic conjunction, blade No.10 vibrated and inevitably. spun off due to the large centrifugal force. Therefore, blade No.10 first cracked at the locking handle, then broke at the root, which caused all the other 11 blades to be broken by the crack of blade No.10.

In order to study the rules of rock bursts caused by faults by means of mechanical analysis of a roof rock-mass balanced structure and numerical simulation about fault slip destabilization, the effect of coal mining operation on fault plane stresses and slip displacement were studied. The results indicate that the slip displacement sharply increases due to the decrease of normal stress and the increase of shear stress at the fault plane when the working face advances from the footwall to the fault itself, which may induce a fault rock burst. However, this slip displacement will be very small due to the increase of normal stress and the decrease of shear stress when the working face advances from the hanging wall to the fault itself, which results in a very small risk of a fault rock burst.

The mechanism of a hydro-viscous soft start is of great importance in the design of a hydro-viscous clutch and its control system. To explain the mechanism of a hydro-viscous soft start, the startup process of a belt conveyor was numerically analyzed with the modified Reynolds equation, an energy equation and a temperature-viscosity equation. The effect of temperature and grooves of the friction disk surface on torque transfer and load capacity of the oil film have also been analyzed. The results show that 1) the grooves are the basis of forming dynamic pressure but they may reduce the capacity of torque transfer to a certain extent, 2) during the startup process, temperature has little effect on torque transfer and load capacity and the variation in load capacity of the oil film is very small, indicating that it is preferable to use the flow rate as a control object than the pressure of the feed cylinder. The results have been verified by an experiment.

Water-preserved mining is one of the important parts of the 'Green Mining' technological system. The purpose of water-preserved mining is to prevent water from bursting out in coal mines and thus to protect water resources. The principle of water-resisting key strata (WKS) is proposed to establish a model capable of guiding and developing water-preserved mining technology. The experimental model of the WKS is constructed following requirements of the Data Image Correlative Method (DICM). Five experimental schemes are designed according to different combined patterns of the WKS. The water-resisting performance of the WKS is analyzed from observation of structural stability. All of them provide referential value for water-preserved mining.

The Xiangshan uranium deposit in Jiangxi province is one of the most important uranium deposits in China. The aim of our study is to obtain a better understanding of rock deformation and dilation associated with mineralization, to predict the most favorable locations of mineralization, and to assist with future mineral exploration in this deposit. On the basis of geological and structural data from previous studies, we have constructed a coupled deformation and fluid flow numerical model and simulated the faulting deformation and major mechanical factors controlling mineralization in the deposit. Particular attention has been paid to variations in regional stress, distributions of shear strain, volumetric strain and pore pressure. The relationship between the structural/faulting movement and mineralization is obtained through analyzing the deformation state of fault zones. The results suggest that the mineralization is related to volumetric strain, shear strain and pore pressures. The locations displaying all these factors represent the most favorable sites for mineralization. These model results are important for guiding the exploration of new uranium deposits in Xiangshan.

Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element model for calculating the deformation of wire rope was obtained. Completely constraining one end of the wire rope and applying an axial force to the other end, we established the boundary conditions for solving the model. In addition, we numerically simulated the stress and deformation of the wire, obtaining the deformation distribution of each wire within the wire rope under different laying directions. At the end, a tensile test of the 6×19 IWS wire rope was carried out and the results of simulation and experiment compared.