Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811810
R. Kathiresan, Tan Xiong, S. K. Panda, P. Das, T. Reindl
Battery-operated Light Emitting Diodes (LEDs) are often arranged in parallel strings in a lighting fixture due to the high voltage gain required in case of a series type connection. Yet, current sharing is prevalent in the parallel configuration due to the large forward voltage tolerance of high-power LEDs resulting in uneven light output and premature failure when they are “overdriven”. Current-matching techniques in practice involve complexity, high cost and reduced efficiency. In this paper, a Single Inductor Multiple Output (SIMO) parallel string LED driver with time multiplexing control which takes advantage of the inability of the human eye in visual perception of high-frequency operation in order to time-share the operation of individual strings is proposed. This shall greatly reduce the component count and complexity with less than 5% current mismatch. Soft start, dimming and shutdown features are achieved for enabling off-grid solar photovoltaic (PV)-based lighting. Also, the availability of the system is increased by introducing a LED failure protocol which has been validated by simulation and hardware implementation.
{"title":"A non-isolated converter design with time-multiplexing control topology for un-binned high-power LEDs in parallel operation for off-grid solar-PV streetlamps","authors":"R. Kathiresan, Tan Xiong, S. K. Panda, P. Das, T. Reindl","doi":"10.1109/ICSET.2016.7811810","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811810","url":null,"abstract":"Battery-operated Light Emitting Diodes (LEDs) are often arranged in parallel strings in a lighting fixture due to the high voltage gain required in case of a series type connection. Yet, current sharing is prevalent in the parallel configuration due to the large forward voltage tolerance of high-power LEDs resulting in uneven light output and premature failure when they are “overdriven”. Current-matching techniques in practice involve complexity, high cost and reduced efficiency. In this paper, a Single Inductor Multiple Output (SIMO) parallel string LED driver with time multiplexing control which takes advantage of the inability of the human eye in visual perception of high-frequency operation in order to time-share the operation of individual strings is proposed. This shall greatly reduce the component count and complexity with less than 5% current mismatch. Soft start, dimming and shutdown features are achieved for enabling off-grid solar photovoltaic (PV)-based lighting. Also, the availability of the system is increased by introducing a LED failure protocol which has been validated by simulation and hardware implementation.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126967281","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811749
T. Vu, K. Turitsyn
Power systems are experiencing a historical transformation in their paradigm and architecture. As such, the classical methods ensuring secure operation of power grids, which are largely developed several decades ago, need to be reassessed. At the same time, new generations of smart electronic devices provide fast actuation to smart power grids. Also, transmission resources are continuously installed into the system and will be ubiquitously available in the future. These assets provide new opportunities for power grids' operation controls. In this paper, we sketches the ideas of viable alternatives for traditional remedial actions of power grids with high penetration of renewables, in which the renewables are integrated with synchronverters to mimic the dynamics of conventional generators and transmission lines are equipped with FACTS devices. In these novel emergency control schemes, the power electronics resources are exploited to control the inertia/damping of the imitated generators as well as the susceptances of transmission lines in order to quickly stabilize the power system under emergency situations. The proposed controls are designed by solving convex optimization problems, making them scalable to large scale power grids. Also, these emergency control schemes can be implemented with minor investment by exploiting the plentiful transmission facilities ubiquitously available on the existing power grids.
{"title":"Options for emergency control of power grids with high penetration of renewables","authors":"T. Vu, K. Turitsyn","doi":"10.1109/ICSET.2016.7811749","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811749","url":null,"abstract":"Power systems are experiencing a historical transformation in their paradigm and architecture. As such, the classical methods ensuring secure operation of power grids, which are largely developed several decades ago, need to be reassessed. At the same time, new generations of smart electronic devices provide fast actuation to smart power grids. Also, transmission resources are continuously installed into the system and will be ubiquitously available in the future. These assets provide new opportunities for power grids' operation controls. In this paper, we sketches the ideas of viable alternatives for traditional remedial actions of power grids with high penetration of renewables, in which the renewables are integrated with synchronverters to mimic the dynamics of conventional generators and transmission lines are equipped with FACTS devices. In these novel emergency control schemes, the power electronics resources are exploited to control the inertia/damping of the imitated generators as well as the susceptances of transmission lines in order to quickly stabilize the power system under emergency situations. The proposed controls are designed by solving convex optimization problems, making them scalable to large scale power grids. Also, these emergency control schemes can be implemented with minor investment by exploiting the plentiful transmission facilities ubiquitously available on the existing power grids.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131057928","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811802
Hoang Vu Nguyen, Yoon-Cheul Jeung, Dong-Choon Lee
In this paper, an AC/DC converter with a small DC-link capacitor for EV chargers is proposed, where a bridgeless PFC (power factor correction) boost rectifier and a full-bridge phase-shifted-modulated DC-DC converter are employed to transfer power from the grid to the electric vehicle. In order to solve the inherent problem of the second-order ripple power in a single-phase AC/DC converter, an auxiliary circuit is added, by which the DC-link capacitor can be reduced significantly. As a result, the bulky electrolytic capacitor can be replaced by a reliable film capacitor. The effectiveness of the proposed method has been verified by simulation results.
{"title":"Battery charger with small DC-link capacitors for G2V applications","authors":"Hoang Vu Nguyen, Yoon-Cheul Jeung, Dong-Choon Lee","doi":"10.1109/ICSET.2016.7811802","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811802","url":null,"abstract":"In this paper, an AC/DC converter with a small DC-link capacitor for EV chargers is proposed, where a bridgeless PFC (power factor correction) boost rectifier and a full-bridge phase-shifted-modulated DC-DC converter are employed to transfer power from the grid to the electric vehicle. In order to solve the inherent problem of the second-order ripple power in a single-phase AC/DC converter, an auxiliary circuit is added, by which the DC-link capacitor can be reduced significantly. As a result, the bulky electrolytic capacitor can be replaced by a reliable film capacitor. The effectiveness of the proposed method has been verified by simulation results.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"63 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131082136","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811758
T. Masuta, Joao Gari da Silva Fonseca, Hideaki Ootake, A. Murata
The installed capacity of photovoltaic (PV) generation in Japan is currently more than 20 GW. This capacity has been rapidly increasing since the start of the feed-in tariff policy in 2012. The installed capacity after 2030 may be considerably larger than the current supposition if this trend continues. In this study, we conducted numerical simulations of the demand and supply operation with consideration of the unit commitment of conventional power generators using PV generation forecasting in economic-load dispatching control. This operation occurs in power systems with extremely large integrations of PV generation. The impact of PV generation forecasting errors on the demand and supply imbalance is quantitatively evaluated with consideration of the installed PV capacity as a parameter. Simulation results show that the impact of the forecasting errors becomes small for a larger value of the installed PV capacity. The results additionally reveal that efficient use of PV generation is more important in power systems with extremely large integrations of PV generation.
{"title":"Study on demand and supply operation using forecasting in power systems with extremely large integrations of photovoltaic generation","authors":"T. Masuta, Joao Gari da Silva Fonseca, Hideaki Ootake, A. Murata","doi":"10.1109/ICSET.2016.7811758","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811758","url":null,"abstract":"The installed capacity of photovoltaic (PV) generation in Japan is currently more than 20 GW. This capacity has been rapidly increasing since the start of the feed-in tariff policy in 2012. The installed capacity after 2030 may be considerably larger than the current supposition if this trend continues. In this study, we conducted numerical simulations of the demand and supply operation with consideration of the unit commitment of conventional power generators using PV generation forecasting in economic-load dispatching control. This operation occurs in power systems with extremely large integrations of PV generation. The impact of PV generation forecasting errors on the demand and supply imbalance is quantitatively evaluated with consideration of the installed PV capacity as a parameter. Simulation results show that the impact of the forecasting errors becomes small for a larger value of the installed PV capacity. The results additionally reveal that efficient use of PV generation is more important in power systems with extremely large integrations of PV generation.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"213 0 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122826903","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811795
K. Alam, L. Tria, Daming Zhang, M.F. Rahman
This paper concerns the design of a Solid-State Transformer (SST) based grid integrated battery charger with an isolated bi-directional dc-dc converter to maintain the overall system competitiveness. The proposed full bridge DC-DC converter exploits the shoot through mode in the V2G mode for the boosting purpose, which is the uniqueness of the proposed topology. The inclusion of SST in the design can exhibit substantially compact size and other potential functions such as reactive power flow control, bi-directional power flow etc. The design of the high frequency transformer along with the electrical equivalent circuit obtained from FEA analysis is presented, which is one of the key contributions of this paper. As a proof of concept, simulation results obtained from Matlab-Simulink tools are presented. In summary, design considerations in building the SST based DC-fast charger in a 1-kW power level are presented which can be scaled up to the desired power level according to the requirements.
{"title":"Design of a bi-directional DC-DC converter for Solid-State Transformer(SST) application by exploiting the shoot through mode","authors":"K. Alam, L. Tria, Daming Zhang, M.F. Rahman","doi":"10.1109/ICSET.2016.7811795","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811795","url":null,"abstract":"This paper concerns the design of a Solid-State Transformer (SST) based grid integrated battery charger with an isolated bi-directional dc-dc converter to maintain the overall system competitiveness. The proposed full bridge DC-DC converter exploits the shoot through mode in the V2G mode for the boosting purpose, which is the uniqueness of the proposed topology. The inclusion of SST in the design can exhibit substantially compact size and other potential functions such as reactive power flow control, bi-directional power flow etc. The design of the high frequency transformer along with the electrical equivalent circuit obtained from FEA analysis is presented, which is one of the key contributions of this paper. As a proof of concept, simulation results obtained from Matlab-Simulink tools are presented. In summary, design considerations in building the SST based DC-fast charger in a 1-kW power level are presented which can be scaled up to the desired power level according to the requirements.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128472723","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811775
D. Tuyen, T. T. Vu, V. Phan, P. Q. Dzung
In this paper, a SVPWM for an indirect matrix converter (IMC) with dual output inverter has been proposed to eliminate the common-mode voltage (CMV). The presented converter is a combination of the conventional rectifier stage and a dual inverter stage for feeding open-end winding load. The principles of selecting suitable active vectors and zero vectors and then properly arranging the switching sequence in the dual inverter stage are described to eliminate the CMV and to obtain the zero current commutation. The dual inverter IMC with the new SVPWM method significantly eliminates the CMV without any extra hardware. The simulation results are shown to demonstrate that the new SVM method can generate good performance of the input/output waveforms and to provide CMV elimination.
{"title":"SVPWM method for dual indirect matrix converter with zero-common mode voltage","authors":"D. Tuyen, T. T. Vu, V. Phan, P. Q. Dzung","doi":"10.1109/ICSET.2016.7811775","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811775","url":null,"abstract":"In this paper, a SVPWM for an indirect matrix converter (IMC) with dual output inverter has been proposed to eliminate the common-mode voltage (CMV). The presented converter is a combination of the conventional rectifier stage and a dual inverter stage for feeding open-end winding load. The principles of selecting suitable active vectors and zero vectors and then properly arranging the switching sequence in the dual inverter stage are described to eliminate the CMV and to obtain the zero current commutation. The dual inverter IMC with the new SVPWM method significantly eliminates the CMV without any extra hardware. The simulation results are shown to demonstrate that the new SVM method can generate good performance of the input/output waveforms and to provide CMV elimination.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"157 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127250765","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811801
Yuki Nishiya, N. D. Dinh, G. Fujita
This paper proposes a new switching method to increase the efficiency in Dual Active Bridge converter (DAB). Two level PWM is general method but the efficiency is lower than three level PWM. In this paper, three level inverter is applied in DAB and the efficiency is compared two level PWM. The power loss of MOSFET checked and the power loss with three level PWM is expected to lower loss. The dead-time is controlled for generating three level voltage. Through a simulation and an experiment, the proposed switching method is compared the conventional switching method.
{"title":"Comparison of two level PWM and three level PWM in Dual Active Bridge converter","authors":"Yuki Nishiya, N. D. Dinh, G. Fujita","doi":"10.1109/ICSET.2016.7811801","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811801","url":null,"abstract":"This paper proposes a new switching method to increase the efficiency in Dual Active Bridge converter (DAB). Two level PWM is general method but the efficiency is lower than three level PWM. In this paper, three level inverter is applied in DAB and the efficiency is compared two level PWM. The power loss of MOSFET checked and the power loss with three level PWM is expected to lower loss. The dead-time is controlled for generating three level voltage. Through a simulation and an experiment, the proposed switching method is compared the conventional switching method.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121674812","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811806
S. Nadarajan, A. Gupta, S. K. Panda
In this paper, the SMART grid concepts and technology that can be potentially applied to address key challenges in future Naval vessels are analyzed. The IEEE standards for designing various modules for naval vessels such as Integrated Power System (IPS) are discussed and proposed potential architecture for power management module in naval vessel IPS to supply SMART grid concepts.
在本文中，分析了智能网格概念和技术，这些概念和技术可以潜在地应用于解决未来海军舰艇的关键挑战。讨论了集成电源系统(Integrated Power System, IPS)等舰船电源管理模块设计的IEEE标准，提出了集成电源管理模块的潜在架构，以实现智能电网概念。
{"title":"Review of smart grid requirements and design standards for future Naval vessels","authors":"S. Nadarajan, A. Gupta, S. K. Panda","doi":"10.1109/ICSET.2016.7811806","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811806","url":null,"abstract":"In this paper, the SMART grid concepts and technology that can be potentially applied to address key challenges in future Naval vessels are analyzed. The IEEE standards for designing various modules for naval vessels such as Integrated Power System (IPS) are discussed and proposed potential architecture for power management module in naval vessel IPS to supply SMART grid concepts.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116920253","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811813
N. H. Hieu, L. H. Lam
Traditionally, ancillary market is supported by a lot of conventional generators to produce or use reactive power with the purpose enhance voltage stability. However, in recently years, with the penetration of new wind generations (Double Fed Induction Generator (DFIG) and Direct Drive Synchronous Generator (DDSG)) and through different set of control possibility, wind power plants are able to partly participate in the provision of the ancillary market for control frequency and voltage. However, economic issue is one of a particular big challenge. Therefore, this paper study the method to calculate the price of reactive power with the purpose support wind farm provide reactive power in order to increase voltage stability for power system based on locational marginal price. This study used the Power World Program to simulate wind generator (DFIG) and calculate the locational marginal price. A sample wscc_9bus_Wind-DFIG is used to show the change of benefit of wind generator when the increasing load is applied.
{"title":"Using double Fed induction generator to enhance voltage stability and solving economic issue","authors":"N. H. Hieu, L. H. Lam","doi":"10.1109/ICSET.2016.7811813","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811813","url":null,"abstract":"Traditionally, ancillary market is supported by a lot of conventional generators to produce or use reactive power with the purpose enhance voltage stability. However, in recently years, with the penetration of new wind generations (Double Fed Induction Generator (DFIG) and Direct Drive Synchronous Generator (DDSG)) and through different set of control possibility, wind power plants are able to partly participate in the provision of the ancillary market for control frequency and voltage. However, economic issue is one of a particular big challenge. Therefore, this paper study the method to calculate the price of reactive power with the purpose support wind farm provide reactive power in order to increase voltage stability for power system based on locational marginal price. This study used the Power World Program to simulate wind generator (DFIG) and calculate the locational marginal price. A sample wscc_9bus_Wind-DFIG is used to show the change of benefit of wind generator when the increasing load is applied.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114466945","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2016-11-01DOI: 10.1109/ICSET.2016.7811819
A. Haque, T. Vo, P. Nguyen
Electrical distribution networks worldwide are facing frequent capacity challenges due to the widespread roll out of various distributed energy resources (DERs). A number of demand response (DR) mechanisms have been developed in order to circumvent the problems and enhance the flexibility of the distribution network. While the existing centralized control system remains its crucial role for reliable and secure grid operation, distributed intelligence is a complement technology with a focus on dividing the control task into a number of simpler problems and solve them with minimum exchange of information. Based on the recent developments of distributed intelligence, this paper discusses a decentralized approach to enable demand response for managing the congestions more efficiently. The approach is validated with simulations for representative Dutch low-voltage (LV) networks.
{"title":"Distributed intelligence: Unleashing flexibilities for congestion management in smart distribution networks (Invited paper)","authors":"A. Haque, T. Vo, P. Nguyen","doi":"10.1109/ICSET.2016.7811819","DOIUrl":"https://doi.org/10.1109/ICSET.2016.7811819","url":null,"abstract":"Electrical distribution networks worldwide are facing frequent capacity challenges due to the widespread roll out of various distributed energy resources (DERs). A number of demand response (DR) mechanisms have been developed in order to circumvent the problems and enhance the flexibility of the distribution network. While the existing centralized control system remains its crucial role for reliable and secure grid operation, distributed intelligence is a complement technology with a focus on dividing the control task into a number of simpler problems and solve them with minimum exchange of information. Based on the recent developments of distributed intelligence, this paper discusses a decentralized approach to enable demand response for managing the congestions more efficiently. The approach is validated with simulations for representative Dutch low-voltage (LV) networks.","PeriodicalId":164446,"journal":{"name":"2016 IEEE International Conference on Sustainable Energy Technologies (ICSET)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2016-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117210072","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：