Pub Date : 2021-10-12DOI: 10.3390/standards1020008
L. Carlsen
Rating the potential land use for crop production and/or ranching is typically a process where production gains counterbalance environmental losses. Whereas the production gains are often easy to verify, the environmental losses may render visibility through the changes in the ecosystem service, such as water and habitat quality, carbon storage, etc., thus, leaving the decision maker with a multi-criteria problem. The present study demonstrates how partial-order methodology constitutes an advantageous tool for rating/ranking land use that takes trade-offs into account. It is demonstrated that not only the optimal choice of area, on an average basis, e.g., for crop production, is disclosed, but also the relative importance of the included indicators (production gains, ecosystem losses). A short introduction is given, applying data from a recent Chinese study looking for the optimal monoculture as a function of ecosystem tradeoffs. A more elaborate system applying data from the esgame was used, disclosing the most beneficial area for crop production and for ranching, as well as the relative indicators’ importance. The study further demonstrates that a single composite indicator obtained by simple aggregation of indicator values as a ranking tool may lead to a result where gains are optimized; however, this comes at the expense of the environment.
{"title":"Rating Potential Land Use Taking Ecosystem Service into Account—How to Manage Trade-Offs","authors":"L. Carlsen","doi":"10.3390/standards1020008","DOIUrl":"https://doi.org/10.3390/standards1020008","url":null,"abstract":"Rating the potential land use for crop production and/or ranching is typically a process where production gains counterbalance environmental losses. Whereas the production gains are often easy to verify, the environmental losses may render visibility through the changes in the ecosystem service, such as water and habitat quality, carbon storage, etc., thus, leaving the decision maker with a multi-criteria problem. The present study demonstrates how partial-order methodology constitutes an advantageous tool for rating/ranking land use that takes trade-offs into account. It is demonstrated that not only the optimal choice of area, on an average basis, e.g., for crop production, is disclosed, but also the relative importance of the included indicators (production gains, ecosystem losses). A short introduction is given, applying data from a recent Chinese study looking for the optimal monoculture as a function of ecosystem tradeoffs. A more elaborate system applying data from the esgame was used, disclosing the most beneficial area for crop production and for ranching, as well as the relative indicators’ importance. The study further demonstrates that a single composite indicator obtained by simple aggregation of indicator values as a ranking tool may lead to a result where gains are optimized; however, this comes at the expense of the environment.","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76644148","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-10-05DOI: 10.3390/standards1020007
S. Kyle
Explore3DM will be an online resource to explore the diverse interests behind three-dimensional measurement and three-dimensional metrology (3DM). The motivation has been the development of large-volume and portable 3D methods and systems for applications in manufacturing, an activity which has been growing for the past 40 years. However, the measurement spectrum in Explore3DM will be wider and include, for example, as-built process plant at the large-object end and X-Ray CT inspection at the small-object end. This wider spectrum will support cross-sector research at University College London (UCL) to transfer 3DM developments from one sector to another. Initially, Explore3DM will have a core directory incorporating systems manufacturers, service suppliers, research groups and disseminators of metrology knowledge. Mechanisms for solving end users’ measurement tasks will add to further growth of 3DM. The resource is intended to be free to use and the directory free to join at a basic level. Premium directory sponsorship by commercial companies is expected to provide revenue to sustain and develop the resource and support 3DM development. With regard to standards, LVM and PCM systems and techniques can be difficult to assess with a standardized approach because of the highly flexible ways they can be applied. However, some standards have been developed and there is scope for more, for example in the terminology used. A dictionary will be a component of Explore3DM’s future knowledge base. By presenting a first version in a centralized resource, standardized terminology will be encouraged.
{"title":"Explore3DM—A Directory and More for 3D Metrology","authors":"S. Kyle","doi":"10.3390/standards1020007","DOIUrl":"https://doi.org/10.3390/standards1020007","url":null,"abstract":"Explore3DM will be an online resource to explore the diverse interests behind three-dimensional measurement and three-dimensional metrology (3DM). The motivation has been the development of large-volume and portable 3D methods and systems for applications in manufacturing, an activity which has been growing for the past 40 years. However, the measurement spectrum in Explore3DM will be wider and include, for example, as-built process plant at the large-object end and X-Ray CT inspection at the small-object end. This wider spectrum will support cross-sector research at University College London (UCL) to transfer 3DM developments from one sector to another. Initially, Explore3DM will have a core directory incorporating systems manufacturers, service suppliers, research groups and disseminators of metrology knowledge. Mechanisms for solving end users’ measurement tasks will add to further growth of 3DM. The resource is intended to be free to use and the directory free to join at a basic level. Premium directory sponsorship by commercial companies is expected to provide revenue to sustain and develop the resource and support 3DM development. With regard to standards, LVM and PCM systems and techniques can be difficult to assess with a standardized approach because of the highly flexible ways they can be applied. However, some standards have been developed and there is scope for more, for example in the terminology used. A dictionary will be a component of Explore3DM’s future knowledge base. By presenting a first version in a centralized resource, standardized terminology will be encouraged.","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-10-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85221152","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-09-07DOI: 10.3390/standards1010006
F. Casesnoves
Total hip metal arthroplasty (THA) constitutes an important proportion of the standard clinical hip implant usage in Medical Physics and Biomedical Engineering. A computational nonlinear optimization is performed with two commonly metal materials in Metal-on-Metal (MoM) THA. Namely, Cast Co-Cr Alloy and Titanium. The principal result is the numerical determination of the K adimensional-constant parameter of the model. Results from a new more powerful algorithm than previous contributions, show significant improvements. Numerical standard figures for dual optimization give acceptable model-parameter values with low residuals. These results are demonstrated with 2D and 3D Graphical/Interior Optimization also. According to the findings/calculations, the standard optimized metal-model parameters are mathematically proven and verified. Mathematical consequences are obtained for model improvements and in vitro simulation methodology. The wear magnitude for in vitro determinations with these model parameter data constitute the innovation of the method. In consequence, the erosion prediction for laboratory experimental testing in THA adds valuable information to the literature. Applications lead to medical physics improvements for material/metal-THA designs.
{"title":"Mathematical Standard-Parameters Dual Optimization for Metal Hip Arthroplasty Wear Modelling with Medical Physics Applications","authors":"F. Casesnoves","doi":"10.3390/standards1010006","DOIUrl":"https://doi.org/10.3390/standards1010006","url":null,"abstract":"Total hip metal arthroplasty (THA) constitutes an important proportion of the standard clinical hip implant usage in Medical Physics and Biomedical Engineering. A computational nonlinear optimization is performed with two commonly metal materials in Metal-on-Metal (MoM) THA. Namely, Cast Co-Cr Alloy and Titanium. The principal result is the numerical determination of the K adimensional-constant parameter of the model. Results from a new more powerful algorithm than previous contributions, show significant improvements. Numerical standard figures for dual optimization give acceptable model-parameter values with low residuals. These results are demonstrated with 2D and 3D Graphical/Interior Optimization also. According to the findings/calculations, the standard optimized metal-model parameters are mathematically proven and verified. Mathematical consequences are obtained for model improvements and in vitro simulation methodology. The wear magnitude for in vitro determinations with these model parameter data constitute the innovation of the method. In consequence, the erosion prediction for laboratory experimental testing in THA adds valuable information to the literature. Applications lead to medical physics improvements for material/metal-THA designs.","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-09-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85654172","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-08-17DOI: 10.3390/standards1010005
S. Haag, Colleen Megowan-Romanowicz
Next Generation Science Standards science and engineering practices (NGSS S&E) are ways of eliciting reasoning and applying foundational ideas in science. Studies have revealed one major impediment to implementing the NGSS, namely, insufficient teacher preparation, which is a concern at all teaching levels. The present study examined a program grounded in research on how students learn science and engineering pedagogical content knowledge and strategies for incorporating NGSS S&E practices into instruction. The program provided guided teaching practice, content learning experiences in the physical sciences, engineering design tasks, and extended projects. Research questions included: To what extent did the Program increase teachers’ competence and confidence in science content, with emphasis on science and engineering practices? To what extent did the program increase teachers’ use of reformed teaching practices? This mixed-methods, quasi-experimental design examined teacher outcomes in the program for 24 months. The professional development (PD) findings revealed significant increases in teachers’ competence and confidence in integrating science and engineering practices in the classroom. These findings and their specificity contribute to current knowledge and can be utilized by districts in selecting PD to support teachers in preparing to implement the NGSS successfully.
{"title":"Building Competence in Science and Engineering","authors":"S. Haag, Colleen Megowan-Romanowicz","doi":"10.3390/standards1010005","DOIUrl":"https://doi.org/10.3390/standards1010005","url":null,"abstract":"Next Generation Science Standards science and engineering practices (NGSS S&E) are ways of eliciting reasoning and applying foundational ideas in science. Studies have revealed one major impediment to implementing the NGSS, namely, insufficient teacher preparation, which is a concern at all teaching levels. The present study examined a program grounded in research on how students learn science and engineering pedagogical content knowledge and strategies for incorporating NGSS S&E practices into instruction. The program provided guided teaching practice, content learning experiences in the physical sciences, engineering design tasks, and extended projects. Research questions included: To what extent did the Program increase teachers’ competence and confidence in science content, with emphasis on science and engineering practices? To what extent did the program increase teachers’ use of reformed teaching practices? This mixed-methods, quasi-experimental design examined teacher outcomes in the program for 24 months. The professional development (PD) findings revealed significant increases in teachers’ competence and confidence in integrating science and engineering practices in the classroom. These findings and their specificity contribute to current knowledge and can be utilized by districts in selecting PD to support teachers in preparing to implement the NGSS successfully.","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-08-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88413317","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-08-12DOI: 10.3390/standards1010004
Yimin Deng, R. Dewil, L. Appels, Huili Zhang, Shuo Li, J. Baeyens
When dealing with powders, a fundamental knowledge of their physical parameters is indispensable, with different methods and approaches proposed in literature. Results obtained differ widely and it is important to define standards to be applied, both toward the methods of investigation and the interpretation of experimental results. The present research intends to propose such standards, while defining general rules to be respected. Firstly, the problem of defining the particle size is inspected. It was found that describing the size of a particle is not as straightforward as one might suspect. Factors of non-sphericity and size distributions make it impossible to put ‘size’ in just one number. Whereas sieving can be used for coarser particles of a size in excess of about 50 µm, instrumental techniques span a wide size range. For fine particles, the occurrence of cohesive forces needs to be overcome and solvents, dispersants and sample mixing need to be applied. Secondly, the shape of the particles is examined. By defining sphericity, irregularly shaped particles are described. Finally, the density of particles, of particle assemblies and their voidage (volume fraction of voids) and the different ways to investigate them are explored.
{"title":"The Need to Accurately Define and Measure the Properties of Particles","authors":"Yimin Deng, R. Dewil, L. Appels, Huili Zhang, Shuo Li, J. Baeyens","doi":"10.3390/standards1010004","DOIUrl":"https://doi.org/10.3390/standards1010004","url":null,"abstract":"When dealing with powders, a fundamental knowledge of their physical parameters is indispensable, with different methods and approaches proposed in literature. Results obtained differ widely and it is important to define standards to be applied, both toward the methods of investigation and the interpretation of experimental results. The present research intends to propose such standards, while defining general rules to be respected. Firstly, the problem of defining the particle size is inspected. It was found that describing the size of a particle is not as straightforward as one might suspect. Factors of non-sphericity and size distributions make it impossible to put ‘size’ in just one number. Whereas sieving can be used for coarser particles of a size in excess of about 50 µm, instrumental techniques span a wide size range. For fine particles, the occurrence of cohesive forces needs to be overcome and solvents, dispersants and sample mixing need to be applied. Secondly, the shape of the particles is examined. By defining sphericity, irregularly shaped particles are described. Finally, the density of particles, of particle assemblies and their voidage (volume fraction of voids) and the different ways to investigate them are explored.","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-08-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"74423288","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2021-05-08DOI: 10.3390/STANDARDS1010003
P. Glavič
We are glad to present the inaugural issue of the Standards journal [...]
我们很高兴向大家介绍标准杂志的创刊号[…]
{"title":"Special Issue: Feature Papers to Celebrate the Inaugural Issue of Standards","authors":"P. Glavič","doi":"10.3390/STANDARDS1010003","DOIUrl":"https://doi.org/10.3390/STANDARDS1010003","url":null,"abstract":"We are glad to present the inaugural issue of the Standards journal [...]","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-05-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81601887","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Standards: A Scientific Journal of Standardization","authors":"Shu-Kun Lin","doi":"10.3390/STANDARDS1010001","DOIUrl":"https://doi.org/10.3390/STANDARDS1010001","url":null,"abstract":"We first planned to launch the journal Standards in 2012 and obtained ISSN 2305-6703 for Standards (Basel) [...]","PeriodicalId":21933,"journal":{"name":"Standards","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2021-01-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85846585","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：