Zhongguo gu shang = China journal of orthopaedics and traumatology最新文献

The minimally invasive decompression technique represents a novel approach for the treatment of lumbar spinal stenosis(LSS). This method minimizes peripheral tissue damage, decreases the incidence of postoperative complications, optimizes the alleviation of nerve root compression, and expedites patient recovery. Therefore, there are various opinions on the minimally invasive decompression surgery technique for the spine both domestically and internationally today. To enable patients to select an appropriate surgical plan with optimal therapeutic outcomes, this article offers a comprehensive analysis of the advantages, disadvantages, and indications of prevalent minimally invasive spinal decompression techniques for the treatment of lumbar spinal stenosis. Additionally, it presents a comparative evaluation of the therapeutic effects associated with various minimally invasive techniques. This analysis aims to furnish a robust theoretical foundation for the clinical application of diverse minimally invasive decompression techniques in managing lumbar spinal stenosis and related conditions.

Lumbar disc herniation refers to a syndrome mainly characterized by low back and leg pain caused by factors such as degeneration of the lumbar intervertebral disc, deterioration of the biomechanical environment, and formation of immune inflammatory reactions, which lead to the protrusion of intradiscal tissue and compression of nerves. In cases of massive migrated lumbar disc herniation, the nucleus pulposus is prolapsed and migrated, often accompanied by severe clinical symptoms and usually requiring surgical treatment. Since the phenomenon of resorption after lumbar disc herniation is discovered and proposed, relevant literature has continuously emerged. Some scholars have indicated that the resorption rate of massive migrated protrusions is higher, but its mechanism has not been fully clarified. This article reviews and summarizes the resorption mechanisms of massive migrated lumbar disc herniation in recent years. The current research contents mainly include immune inflammatory reactions, the formation of blood vessels and lymphatics, matrix metalloproteinases, dehydration, cell autophagy and apoptosis, and tension application. Based on the above mechanism theory of resorption, we believe that in the treatment of massive migrated LDH, inflammatory reactions should be maintained. At the same time, the patient's clinical symptoms should be used as the main surgical evaluation criterion to avoid unnecessary social, economic, and medical burdens caused by overtreatment.

Objective: To compare the biomechanical properties of four internal fixation methods in a lower cervical spine injury model using the finite element method.

Methods: Cervical CT data of a 28-year-old healthy adult male were utilized to establish a finite element model of the normal cervical spine and a lower cervical spine three-column injury model. Four internal fixation methods were then applied to the three-column injury model, resulting in four groups:Group A, anterior cervical locked-plate(ACLP) fixation system model(anterior approach);Group B, posterior cervical pedicle screw fixation model (posterior approach);Group C, combined anterior and posterior cervical pedicle screw fixation model; Group D, Novel composite anterior cervical internal fixation model. A 75 N axial compressive load and a 1.0 N·m pure moment were applied to the upper surface of the cervical spine model to simulate flexion, extension, rotation, and lateral bending movements. The intervertebral range of motion(ROM) and stress distribution of the internal fixators under different motion conditions were compared across all models.

Results: Compared with the normal model, the reductions in overall intervertebral ROM for each group under flexion, extension, rotation, and lateral bending were as follows:Group A, 24.04°, 23.12°, 6.24°, and 9.06°;Group B, 24.42°, 24.34°, 6.48°, and 9.20°;Group C, 25.43°, 25.29°, 7.17°, and 9.57°;Group D, 24.75°, 25.5°, 6.71°, and 9.12°. The peak stress values of the internal fixators in each group were:Group A, 53.9 MPa, 79.9 MPa, 61.4 MPa, and 80.3 MPa;Group B, 218.3 MPa, 105.4 MPa, 206.6 MPa, and 186.8 MPa;Group C, 40.8 MPa, 97.2 MPa, 47.1 MPa, and 39.4 MPa;Group D, 93.0 MPa, 144.0 MPa, 64.8 MPa, and 106.3 MPa.

Conclusion: The biomechanical properties of the novel composite anterior cervical internal fixation method are similar to those of the combined anterior-posterior fixation method, and superior to both the anterior cervical ACLP plate-screw fixation and posterior cervical pedicle screw fixation methods.

Objective: To compare the effects of bilateral vertebral puncture guided by an angle-adjustable linear laser auxiliary device versus free-hand bilateral vertebral puncture.

Methods: A retrospective analysis was conducted on the clinical data of 47 patients who underwent thoracolumbar percutaneous kyphoplasty(PKP) from July 2022 to July 2023. All patients received bilateral percutaneous kyphoplasty, among whom 27 cases underwent conventional free-hand puncture (conventional puncture group) and 20 cases underwent puncture guided by a laser auxiliary device (auxiliary puncture group). In the conventional puncture group, there were 11 males and 16 females, with an average age of (69.6±5.1) years and a disease duration of (6.5±3.8) days;the fractured vertebrae were T₁₁-T₁₂ in 13 cases and L₁-L₂ in 14 cases. In the auxiliary puncture group, there were 7 males and 13 females, with an average age of (70.8±5.6) years and a disease duration of (6.4±3.8) days;the fractured vertebrae were T₁₁-T₁₂ in 7 cases and L₁-L₂ in 13 cases. The operation time, total blood loss, intraoperative fluoroscopy times, fluoroscopy duration, radiation dose, puncture success rate, and surgical complications were compared between the two groups. The visual analogue scale (VAS) was used to evaluate low back pain before surgery, 2 days after surgery, and 1 year after surgery.

Results: All patients achieved successful puncture, with good postoperative wound healing and no complications. The operation time of the auxiliary puncture group was (12.1±2.6) minutes, which was shorter than that of the conventional puncture group (14.1±2.8) minutes. The total blood loss of the auxiliary puncture group was (228.5±35.8) ml, less than that of the conventional puncture group (257.0±48.3) ml. The fluoroscopy times, fluoroscopy duration, and radiation dose of the auxiliary puncture group were (5.4±1.3) times, (15.9±3.3) seconds, and (159.4±37.4) μSv, respectively, all lower than those of the conventional puncture group (6.4±1.6) times, (18.8±4.6) seconds, (192.2±48.5) μSv, with statistically significant differences(P<0.05). There were no statistically significant differences in low back VAS scores between the two groups before surgery, 2 days after surgery, or 1 year after surgery(P>0.05).

Conclusion: Both laser auxiliary device-guided vertebral puncture and free-hand vertebral puncture have high success rates and similar postoperative curative effects. However, the laser auxiliary device-guided puncture has shorter operation time, less blood loss, and lower radiation hazard.

Objective: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents.

Methods: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire.

Results: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05).

Conclusion: In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.

Objective: To evaluate the short-and medium-term efficacy of posterior medial branch block in the treatment of persistent pain after percutaneous vertebral augmentation.

Methods: From January 2018 to January 2023, a total of 1, 062 patients with osteoporotic vertebral compression fractures underwent percutaneous vertebral augmentation. Among them, 32 elderly patients who experienced persistent low back pain after surgery and subsequently received posterior medial branch block and cryoablation were included. Six patients died during follow-up, leaving 26 patients for final analysis (1 male, 25 females). The mean age was (82.96±5.66) years (ranged, 76 to 94 years). The mean body mass index was (23.76±3.08) kg·m^-2(ranged 18.1 to 27.2 kg·m^-2). The bone mineral density T-value ranged from -2.5 to -4.3 with a mean of (-3.09±0.56). The mean volume of bone cement injected was 6.00 (5.38, 7.00) ml. Fracture locations were T₁₁ (2 cases), T₁₂ (7 cases), L₁ (10 cases), L₂ (6 cases), and L₃ (1 case). The mean interval from vertebral augmentation to block treatment was (7.12±2.22) months (rangd 6 to 12 months). The vertebral augmentation procedures were percutaneous kyphoplasty(PKP) in 12 cases and percutaneous vertebroplasty (PVP) in 14 cases. At the 2nd week, 3rd month, and 6th month after the block, the numerical rating scale(NRS), Oswestry disability index(ODI), patient satisfaction, and pain relief rate at the 6th month were evaluated. Relationships between pain relief rate at the 6th month after the last treatment and possible influencing factors were analyzed.

Results: Compared with X-ray films after percutaneous vertebral augmentation, the X-ray films before block showed an increase in kyphotic angle and vertebral compression rate, with statistically significant differences(P<0.05). At the 2nd week, 3rd month, and 6th month after posterior medial branch block and cryoablation, NRS and ODI scores were significantly lower than before the block(P<0.05). Among the 26 patients, 5 received additional cryoablation. At the 6th month after the last treatment, 19 patients reported excellent or good satisfaction. Univariate binary Logistic analysis showed all P>0.05, and no independent factor affecting final satisfaction or pain relief at 6 months after the last treatment was identified.

Conclusion: Posterior medial branch block(with cryoablation) can effectively improve short-and medium-term symptoms and function in patients with persistent axial low back pain after percutaneous vertebral augmentation for osteoporotic vertebral fractures.

Objective: To investigate the short-to-medium-term clinical efficacy of total hip arthroplasty(THA) with Pinnacle ES constrained liner in the treatment of femoral neck fractures(FNF) associated with lower limb neuromuscular disorders.

Methods: A retrospective analysis was conducted on 16 patients who underwent primary THA using Pinnacle ES constrained liner for FNF with lower limb neuromuscular disorders and had complete follow-up data, treated between January 2020 and January 2023. There were 7 males and 9 females, with a mean age of (68.42±3.58) years old ranging from 61 to 75 years old. Among them, 10 cases had left-sided fractures and 6 had right-sided fractures;based on the Garden classification, 11 cases were type Ⅲ and 5 cases were type Ⅳ. The affected limbs were complicated with sequelae of poliomyelitis (2 cases), Parkinson's disease (2 cases), and sequelae of cerebral infarction (12 cases). All operations were performed via a posterolateral approach. Prosthesis position was evaluated using imaging data. Hip function was assessed by the Harris hip score(HHS) and Merle D'Aubigne hip score. During the follow-up period, the occurrence of complications such as prosthetic dislocation, loosening, and infection was recorded.

Results: One patient died of advanced tumor 2 years after surgery, and the remaining 15 patients were followed up for 24 to 64 months with a mean of (34.8±5.5) months. The operation time ranged from 50 to 90 minutes with a mean of (75.56±8.15) minutes, and the blood loss ranged from 150 to 200 ml with a mean of (170.32±12.56) ml. All patients achieved primary wound healing after surgery. Intraoperatively, femoral calcar splitting occurred in 2 cases, which were treated with titanium cable binding;no neurovascular injuries were observed in any case. The mean HHS increased from (18.95±2.25) preoperatively to (88.02±2.42) at the last follow-up, and the mean Merle D'Aubigne Score increased from (3.05±0.06) preoperatively to (16.65±0.93) at the last follow-up. Postoperative follow-up X-rays showed good prosthetic position, and no complications such as dislocation, prosthetic loosening, periprosthetic fracture, or deep infection occurred during the follow-up period.

Conclusion: Total hip arthroplasty with Pinnacle ES constrained liner is effective in the treatment of femoral neck fractures associated with lower limb neuromuscular disorders. It can significantly improve hip function, reduce the postoperative prosthetic dislocation rate, provide good initial stability, and achieve satisfactory short-to-medium-term clinical efficacy.