首页 > 最新文献

JEVTE Journal of Electrical Vocational Teacher Education最新文献

英文 中文
PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF BERBASIS WONDERSHARE FILMORA PADA MATA PELAJARAN TRANSMISI TENAGA LISTRIK KELAS X TJTL DI SMKN 1 PERCUT SEI TUAN 基于奇异的互动学习媒体发展在smkn1 PERCUT先生的X级TJTL传播课上
Pub Date : 2023-08-02 DOI: 10.24114/jevte.v3i1.49463
Anjas Pratama Sinaga, Baharuddin .
Abstract The problem in this study is that the existence of media in schools is less practical and difficult to carry and students tend to be able to because teachers explain theoretically and do not optimize technology in media. Wondershare Filmora9-based interactive learning media has never been used by teachers. The objectives of this study are (1) to determine the design process of learning media development wondershare Filmora 9 in the subject of Electric Power Transmission, (2) to determine the feasibility of learning media used in the learning process. The research model used in this study consists of Analysis, design, development, implementation, evaluation (ADDIE). The subjects of this study were students of class XI TJT SMKN 1 Percut Sei Tuan, while the validators of media assessment were UNIMED lecturers and homeroom teachers of class XI TJTL to assess the material and media. The results of this study show that interactive learning media based on Filmora 9 is classified as "Excellent". Based on the results of the assessment the validator got the category "Very Worthy" with details from the media expert validator got a percentage score of 92% with the category "Very Worthy". In the media assessment by material experts, a percentage score of 93.5% was obtained with the category "Very Worthy". Based on the four validators, it can be concluded that interactive learning media based on Filmora 9 is suitable for use for class XI students of TJTL SMKN 1 Percut Sei Tuan. Key Words: Media Filmora 9, feasibility, electric power transmission AbstrakPermasalahan dalam penelitian ini adalah keberadaan media di sekolah kurang praktis serta sulit untuk dibawa dan siswa cenderung bisan karena guru menjelaskan secara teoritik dan kurang mengoptimalkan teknologi dalam media. Media pembelaajran interaktif berbasis Wondershare Filmora9 belum pernah digunakan oleh guru. Tujuan penelitian ini adalah (1) untuk mengetahui proses rancangan pengembangan media pembelajaran Wondershare Filmora 9 pada mata pelajaran Transmisi Tenaga Listrik, (2) untuk mengetahui kelayakan media pembelajaran yang digunakan dalam proses pembelajaran. Adapun model penelitian yang digunakan dalam penelitian ini terdiri dari Analysis, design, development, implementation, evaluation(ADDIE). Subjek penelitian ini adalah siswa kelas XI TJT SMKN 1 Percut Sei Tuan, sedangkan validator penilaian media yaitu dosen UNIMED dan guru wali kelas XI TJTL untuk menilai materi dan media. Hasil penelitian ini menunjukkan bahwa media pembelajaran interaktif berbasis Filmora 9 tergolong pada kategori “Sangat Baik”. Berdasarkan hasil dari penilaian validator mendapat kategori “Sangat Layak” dengan rincian dari validator ahli media mendapat skor persentase 92% dengan kategori “Sangat Layak”. Pada penilaian media oleh ahli materi diperoleh skor persentase 93,5% dengan kategori “Sangat Layak”. Berdasarkan dari keempat validator dapat disimpulkan bahwa media pembelajaran interaktif berbasis Filmora 9 layak di
本研究存在的问题是,学校媒体的存在不太实用,难以携带,学生往往能够因为教师的理论解释而没有优化媒体的技术。基于Wondershare filmora9的互动学习媒体从未被教师使用过。本研究的目的是(1)确定学习媒体开发wondershare Filmora 9在电力传输课题中的设计过程,(2)确定学习媒体在学习过程中使用的可行性。本研究采用的研究模型由分析、设计、开发、实施、评估(ADDIE)组成。本研究结果显示,基于Filmora 9的互动学习媒体被评为“优秀”。根据评估结果,验证者从媒体专家那里获得了“非常有价值”类别的详细信息,验证者在“非常有价值”类别中获得了92%的百分比得分。在材料专家的媒体评估中,获得93.5%的百分比得分,类别为“非常值得”。摘要:permasalahan dalam penelitian ini adalah keberadaan Media di sekolah kurang praktis serta sulit untuk dibawa dan siswa cenderung bisan karena guru menjelaskan secara teoritik dan kurang mengoptimalalkan technologii dalam Media。媒体pembelaajran interaktif基础Wondershare Filmora9 belum pernah digunakan oleh guru。Tujuan penelitian ini adalah (1) untuk mengetahui proses ranangan pengembangan media pembelajan Wondershare Filmora 9 pada mata pelajan Transmisi Tenaga Listrik, (2) untuk mengetahui kelayakan media pembelajan yang digunakan dalam proses pembelajan。Adapun模型penelitian yang digunakan dalam penelitian ini terdiri dari分析、设计、开发、实施、评估(ADDIE)。Hasil penelitian ini menunjukkan bahwa media penbelajaran interaktif basis Filmora . 9 tergolong pada分类为“Sangat Baik”。Berdasarkan hasil dari penaivalidator mendapat kategori " Sangat Layak " dengan rincian dari validator ahli media mendapat skor代表92% dengan kategori " Sangat Layak "。巴基斯坦的媒体报道了93,5%的“Sangat Layak”分类。Kata Kunci:媒体Filmora 9, kelayakan,传输tenaga列表
{"title":"PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF BERBASIS WONDERSHARE FILMORA PADA MATA PELAJARAN TRANSMISI TENAGA LISTRIK KELAS X TJTL DI SMKN 1 PERCUT SEI TUAN","authors":"Anjas Pratama Sinaga, Baharuddin .","doi":"10.24114/jevte.v3i1.49463","DOIUrl":"https://doi.org/10.24114/jevte.v3i1.49463","url":null,"abstract":"Abstract The problem in this study is that the existence of media in schools is less practical and difficult to carry and students tend to be able to because teachers explain theoretically and do not optimize technology in media. Wondershare Filmora9-based interactive learning media has never been used by teachers. The objectives of this study are (1) to determine the design process of learning media development wondershare Filmora 9 in the subject of Electric Power Transmission, (2) to determine the feasibility of learning media used in the learning process. The research model used in this study consists of Analysis, design, development, implementation, evaluation (ADDIE). The subjects of this study were students of class XI TJT SMKN 1 Percut Sei Tuan, while the validators of media assessment were UNIMED lecturers and homeroom teachers of class XI TJTL to assess the material and media. The results of this study show that interactive learning media based on Filmora 9 is classified as \"Excellent\". Based on the results of the assessment the validator got the category \"Very Worthy\" with details from the media expert validator got a percentage score of 92% with the category \"Very Worthy\". In the media assessment by material experts, a percentage score of 93.5% was obtained with the category \"Very Worthy\". Based on the four validators, it can be concluded that interactive learning media based on Filmora 9 is suitable for use for class XI students of TJTL SMKN 1 Percut Sei Tuan. Key Words: Media Filmora 9, feasibility, electric power transmission AbstrakPermasalahan dalam penelitian ini adalah keberadaan media di sekolah kurang praktis serta sulit untuk dibawa dan siswa cenderung bisan karena guru menjelaskan secara teoritik dan kurang mengoptimalkan teknologi dalam media. Media pembelaajran interaktif berbasis Wondershare Filmora9 belum pernah digunakan oleh guru. Tujuan penelitian ini adalah (1) untuk mengetahui proses rancangan pengembangan media pembelajaran Wondershare Filmora 9 pada mata pelajaran Transmisi Tenaga Listrik, (2) untuk mengetahui kelayakan media pembelajaran yang digunakan dalam proses pembelajaran. Adapun model penelitian yang digunakan dalam penelitian ini terdiri dari Analysis, design, development, implementation, evaluation(ADDIE). Subjek penelitian ini adalah siswa kelas XI TJT SMKN 1 Percut Sei Tuan, sedangkan validator penilaian media yaitu dosen UNIMED dan guru wali kelas XI TJTL untuk menilai materi dan media. Hasil penelitian ini menunjukkan bahwa media pembelajaran interaktif berbasis Filmora 9 tergolong pada kategori “Sangat Baik”. Berdasarkan hasil dari penilaian validator mendapat kategori “Sangat Layak” dengan rincian dari validator ahli media mendapat skor persentase 92% dengan kategori “Sangat Layak”. Pada penilaian media oleh ahli materi diperoleh skor persentase 93,5% dengan kategori “Sangat Layak”. Berdasarkan dari keempat validator dapat disimpulkan bahwa media pembelajaran interaktif berbasis Filmora 9 layak di","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135015405","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
PENGEMBANGAN E-MODUL PEMBELAJARAN TEKNIK INSTALASI TENAGA LISTRIK BERBASIS ANDROID DI SMK MEDAN SMK MEDAN以ANDROID为基础的电子学习模块开发电力
Pub Date : 2023-08-02 DOI: 10.24114/jevte.v3i1.49464
Mill Nanda, H. Tambunan
Abstract The purpose of this study is to determine the process of making a good e-module, the feasibility of learning e-modules and the effectiveness of android-based learning e-modules in terms of student learning outcomes. This research was carried out on class X students of Electrical Power Installation Engineering at SMK Negeri 14 Medan in the odd semester of the 2022/2023 academic year. This research is a type of Research and Development (R&D) research using the ADDIE development model. The results of this study show that learning e-modules are very feasible to be used in learning. The results of the Indepentend sample t test analysis showed the results of t count ˃ ttable which is 7,392 > 2,048 and sig. (2-tailed) < 0.05 & 0.000 < 0.05, then the H a hypothesis is acceptable. Thus, it can be concluded that learning using android-based learning E-module is effective on student learning outcomes in the subject of basic electromechanical work class X Electrical Power Installation Engineering SMK Negeri 14 Medan.. Key Words: E-module Learning, Feasibility, Effectiveness, Basic Electromechanical Work AbstrakThe purpose of this study is to determine the process of making a good e-module, the feasibility of learning e-modules and the effectiveness of android-based learning e-modules in terms of student learning outcomes. This research was carried out on class X students of Electrical Power Installation Engineering at SMK Negeri 14 Medan in the odd semester of the 2022/2023 academic year. This research is a type of Research and Development (R&D) research using the ADDIE development model. The results of this study show that learning e-modules are very feasible to be used in learning. The results of the Indepentend sample t test analysis showed the results of t count ˃ ttable which is 7,392 > 2,048 and sig. (2-tailed) < 0.05 & 0.000 < 0.05, then the H a hypothesis is acceptable. Thus, it can be concluded that learning using android-based learning E-module is effective on student learning outcomes in the subject of basic electromechanical work class X Electrical Power Installation Engineering SMK Negeri 14 Medan. Kata Kunci: E-modul Pembelajaran, Kelayakan, Efektivitas, Pekerjaan Dasar Elektromekanik
摘要本研究的目的是确定一个好的电子模块的制作过程,学习电子模块的可行性,以及基于android的学习电子模块在学生学习成果方面的有效性。本研究是在2022/2023学年单学期对SMK Negeri 14棉兰分校电力安装工程X班学生进行的。本研究是一种采用ADDIE开发模型的研究与开发(R&D)研究。研究结果表明,学习电子模块在学习中应用是非常可行的。独立样本t检验分析结果显示,t计数可表为7,392 > 2,048,且sig.(双尾)< 0.05和0.000 < 0.05,则可以接受H a假设。综上所述,基于机器人的学习E-module对学生在机电工作基础课X电力安装工程SMK Negeri 14 Medan的学习效果是有效的。摘要本研究的目的是确定一个好的电子模块的制作过程、学习型电子模块的可行性以及基于android的学习型电子模块在学生学习成果方面的有效性。本研究是在2022/2023学年单学期对SMK Negeri 14棉兰分校电力安装工程X班学生进行的。本研究是一种采用ADDIE开发模型的研究与开发(R&D)研究。研究结果表明,学习电子模块在学习中应用是非常可行的。独立样本t检验分析结果显示,t计数可表为7,392 > 2,048,且sig.(双尾)< 0.05和0.000 < 0.05,则可以接受H a假设。综上所述,基于机器人的学习E-module对学生在机电工作基础课X电力安装工程SMK Negeri 14棉兰的学习效果是有效的。Kata Kunci:电子模块Pembelajaran, Kelayakan, Efektivitas, Pekerjaan Dasar Elektromekanik
{"title":"PENGEMBANGAN E-MODUL PEMBELAJARAN TEKNIK INSTALASI TENAGA LISTRIK BERBASIS ANDROID DI SMK MEDAN","authors":"Mill Nanda, H. Tambunan","doi":"10.24114/jevte.v3i1.49464","DOIUrl":"https://doi.org/10.24114/jevte.v3i1.49464","url":null,"abstract":"Abstract The purpose of this study is to determine the process of making a good e-module, the feasibility of learning e-modules and the effectiveness of android-based learning e-modules in terms of student learning outcomes. This research was carried out on class X students of Electrical Power Installation Engineering at SMK Negeri 14 Medan in the odd semester of the 2022/2023 academic year. This research is a type of Research and Development (R&D) research using the ADDIE development model. The results of this study show that learning e-modules are very feasible to be used in learning. The results of the Indepentend sample t test analysis showed the results of t count ˃ ttable which is 7,392 > 2,048 and sig. (2-tailed) < 0.05 & 0.000 < 0.05, then the H a hypothesis is acceptable. Thus, it can be concluded that learning using android-based learning E-module is effective on student learning outcomes in the subject of basic electromechanical work class X Electrical Power Installation Engineering SMK Negeri 14 Medan.. Key Words: E-module Learning, Feasibility, Effectiveness, Basic Electromechanical Work AbstrakThe purpose of this study is to determine the process of making a good e-module, the feasibility of learning e-modules and the effectiveness of android-based learning e-modules in terms of student learning outcomes. This research was carried out on class X students of Electrical Power Installation Engineering at SMK Negeri 14 Medan in the odd semester of the 2022/2023 academic year. This research is a type of Research and Development (R&D) research using the ADDIE development model. The results of this study show that learning e-modules are very feasible to be used in learning. The results of the Indepentend sample t test analysis showed the results of t count ˃ ttable which is 7,392 > 2,048 and sig. (2-tailed) < 0.05 & 0.000 < 0.05, then the H a hypothesis is acceptable. Thus, it can be concluded that learning using android-based learning E-module is effective on student learning outcomes in the subject of basic electromechanical work class X Electrical Power Installation Engineering SMK Negeri 14 Medan. Kata Kunci: E-modul Pembelajaran, Kelayakan, Efektivitas, Pekerjaan Dasar Elektromekanik","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"210 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116122346","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
PENERAPAN MODEL PEMBELAJARAN ACTIVE KNOWLEDGE SHARING TERHADAP HASIL BELAJAR TEKNIK INSTALASI LISTRIK 与电气工程相关的活动知识学习模式的应用
Pub Date : 2023-08-02 DOI: 10.24114/jevte.v3i1.49457
Maya Gustina, Dadan Mulyana
Abstract The purpose of this research is to: (1) This study aims to (1) find out the differences in learning outcomes between the use of the Active knowledge sharing model and the use of the Expository model on smart home material. (2) Knowing the effectiveness of applying the Active knowledge sharing model to smart home material in class XI Electrical Lighting Installation Engineering (TITL) Imelda Medan Private Vocational School. This type of research is a quasy experiment with the Active Knowledge Sharing research model. The results showed: (1) the learning outcomes of the Experiment class with the Active Knowledge Sharing model (mean = 83.3; g = 0.6). Higher than the learning outcomes of the Expository Model Control class (mean = 69.2; g = 0.29). (2) The learning outcomes of the Active Knowledge Sharing model (88.57%) are categorized higher than the application of the Expository model (33.3%). Based on the results of the t test from the average value of the posttest obtained t_count is 5.69 and t_table is 2.016692199. Based on hypothesis testing criteria. It can be seen that t_count ˃ t_table and P value < (0.05). Then the hypothesis testing is concluded with Ho being rejected and Hα being accepted. This means that there is a very significant difference in learning outcomes using Active Knowledge Sharing and using Expository. The effectiveness showed that the number of students who achieved the KKM score in the Active knowledge sharing model class was 23 students (88.57%) in the high category, while in the class using the Expository model the number of students who achieved the KKM score was only 11 students (33.3%) with low category. While the use of the Active knowledge sharing model is more effective than the use of the Expository model. Key Words: Learning Outcomes, Active Knowledge Sharing Model Exposito Model AbstrakTujuan Penelitian ini untuk: (1) Penelitian ini bertujuan untuk (1) Mengetahui perbedaan hasil belajar antara penggunaan model Active knowledge sharing dengan penggunaan model Ekspositori pada materi smart home. (2) Mengetahui efektifitas penerapan model Active knowledge sharing pada materi smart home pada kelas XI Teknik Instalasi Penerangan Listrik (TITL) SMK Swasta Imelda Medan. Jenis penelitian ini adalah quasy Eksperimen dengan model penelitian Active Knowledge Sharing. Hasil penelitian menunjukkan: (1) hasil belajar kelas Eksperimen dengan model Active Knowledge Sharing (mean =83,3; g =0,6). Lebih tinggi dibandingkan hasil belajar kelas Kontrol model Ekspositori (mean =69,2; g =0,29).  (2) Hasil belajar model Active Knowledge Sharing (88,57%) dikategorikan lebih tinggi dibandingkan dengan penerapan model Ekspositori (33,3%). Berdasarkan hasil uji t dari nilai rata-rata posttest diperoleh    adalah 5,69 dan  adalah 2,016692199. Berdasarkan kriteria uji hipotesis. Dapat dilihat bahwa  ˃ dan P value < (0,05). Maka pengujian hipotesis disimpulkan dengan Ho ditolak dan Hα diterima. Artinya ada perbedaan yang sangat signifik
摘要本研究的目的是:(1)本研究的目的是(1)找出在智能家居材料上使用主动知识共享模型和使用说明文模型在学习结果上的差异。这类研究是主动知识共享研究模式的一种尝试性实验。结果表明:(1)主动知识共享模式下实验班学生的学习效果(均值= 83.3;G = 0.6)。高于说明文模型控制班的学习成绩(平均= 69.2;G = 0.29)。(2)主动知识共享模式的学习成果分类率(88.57%)高于说明文模式(33.3%)。根据t检验的结果,得到后验的平均值t_count为5.69,t_table为2.016692199。基于假设检验标准。可以看出,t_count、t_table和P值均<(0.05)。然后进行假设检验,Ho被拒绝,Hα被接受。这意味着使用主动知识共享和说明性教学在学习结果上有非常显著的差异。结果表明,在积极知识共享模式的高类别班级中,达到KKM得分的学生人数为23人(88.57%),而在使用说明性模型的低类别班级中,达到KKM得分的学生人数仅为11人(33.3%)。而使用主动知识共享模型比使用说明性模型更有效。关键词:学习成果,主动知识共享模型,暴露模型摘要:(1)主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享,主动知识共享(2) Mengetahui efektifitas penerapjapan模式主动知识共享模式、智能家居模式、智能家居模式、智能家居模式、智能家居模式、智能家居模式、智能家居模式、智能家居模式。摘要主动知识共享是一种新型的知识共享模型。Hasil penelitian menunjukkan:(1) Hasil belajar kelas Eksperimen dengan模型主动知识共享(mean =83,3;g = 0, 6)。Lebih tinggi dibandingkan hasil belajar kelas控制模型Ekspositori(均值=69,2;g = 0, 29)。(2) Hasil belajar模型主动知识共享(88.57%),Ekspositori模型主动知识共享(33.3%)。数据分析与数理分析:数理分析5,69,数理分析2,016692199。Berdasarkan标准:hipoesis。P值<(0.05)。Maka企鹅的发育,disimpulse kan dengan Ho ditolak dan Hα diiterima。中国科学技术研究院,中国科学技术研究院,中国科学技术研究院,中国科学技术研究院。Efektivitas yang menunjukkan bahwa jumlah siswa yang mencapai nilai KKM pada kelas模型主动知识共享adalah 23 siswa (88,57%) dengan kategori tinggi, sedangkan pada kelas penggunaan模型Ekspositori jumlah yang mencapai nilai KKM hanya 11 siswa (33,3%) dengan kategori rendah。主动知识共享模型[j]。Kata Kunci: Hasil Belajar,主动知识共享模型ekpossito
{"title":"PENERAPAN MODEL PEMBELAJARAN ACTIVE KNOWLEDGE SHARING TERHADAP HASIL BELAJAR TEKNIK INSTALASI LISTRIK","authors":"Maya Gustina, Dadan Mulyana","doi":"10.24114/jevte.v3i1.49457","DOIUrl":"https://doi.org/10.24114/jevte.v3i1.49457","url":null,"abstract":"Abstract The purpose of this research is to: (1) This study aims to (1) find out the differences in learning outcomes between the use of the Active knowledge sharing model and the use of the Expository model on smart home material. (2) Knowing the effectiveness of applying the Active knowledge sharing model to smart home material in class XI Electrical Lighting Installation Engineering (TITL) Imelda Medan Private Vocational School. This type of research is a quasy experiment with the Active Knowledge Sharing research model. The results showed: (1) the learning outcomes of the Experiment class with the Active Knowledge Sharing model (mean = 83.3; g = 0.6). Higher than the learning outcomes of the Expository Model Control class (mean = 69.2; g = 0.29). (2) The learning outcomes of the Active Knowledge Sharing model (88.57%) are categorized higher than the application of the Expository model (33.3%). Based on the results of the t test from the average value of the posttest obtained t_count is 5.69 and t_table is 2.016692199. Based on hypothesis testing criteria. It can be seen that t_count ˃ t_table and P value < (0.05). Then the hypothesis testing is concluded with Ho being rejected and Hα being accepted. This means that there is a very significant difference in learning outcomes using Active Knowledge Sharing and using Expository. The effectiveness showed that the number of students who achieved the KKM score in the Active knowledge sharing model class was 23 students (88.57%) in the high category, while in the class using the Expository model the number of students who achieved the KKM score was only 11 students (33.3%) with low category. While the use of the Active knowledge sharing model is more effective than the use of the Expository model. Key Words: Learning Outcomes, Active Knowledge Sharing Model Exposito Model AbstrakTujuan Penelitian ini untuk: (1) Penelitian ini bertujuan untuk (1) Mengetahui perbedaan hasil belajar antara penggunaan model Active knowledge sharing dengan penggunaan model Ekspositori pada materi smart home. (2) Mengetahui efektifitas penerapan model Active knowledge sharing pada materi smart home pada kelas XI Teknik Instalasi Penerangan Listrik (TITL) SMK Swasta Imelda Medan. Jenis penelitian ini adalah quasy Eksperimen dengan model penelitian Active Knowledge Sharing. Hasil penelitian menunjukkan: (1) hasil belajar kelas Eksperimen dengan model Active Knowledge Sharing (mean =83,3; g =0,6). Lebih tinggi dibandingkan hasil belajar kelas Kontrol model Ekspositori (mean =69,2; g =0,29).  (2) Hasil belajar model Active Knowledge Sharing (88,57%) dikategorikan lebih tinggi dibandingkan dengan penerapan model Ekspositori (33,3%). Berdasarkan hasil uji t dari nilai rata-rata posttest diperoleh    adalah 5,69 dan  adalah 2,016692199. Berdasarkan kriteria uji hipotesis. Dapat dilihat bahwa  ˃ dan P value < (0,05). Maka pengujian hipotesis disimpulkan dengan Ho ditolak dan Hα diterima. Artinya ada perbedaan yang sangat signifik","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"129 11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-08-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124245091","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
ANALISIS MANAJEMEN BENGKEL SMK DI KOTA MEDAN BERBASIS 5S 这是基于5S的MEDAN city SMK工作坊的管理分析
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40580
Alvyn Zuhri, N. Sinaga
AbstractThe purpose of this study is to ascertain how Seiri, Seiton, Seiso, Seiketsu, and Shitsuke (5S) are applied in the workshop management of SMK's electrical power installation engineering (TITL) competence in Medan. Methods of qualitative descriptive research are being used in this study. The focus of this study is on three TITL practice workshops held at various vocational high schools, specifically the SMK Negeri 1 Percut Sei Tuan, SMK Negeri 2 Medan, and SMK Negeri 5 Medan TITL practice workshops. In this study, observation and written records were utilized as data gathering methods. The steps in the data analysis process are data reduction, data presentation, data inference, and data analysis of qualitative data. According to analysis and research, Seiri, Seiton, Seiso, Seiketsu, and Shitsuke were successfully implemented in the management of the TITL workshop at SMK Negeri 1 Percut Sei Tuan. This is demonstrated by the very good category's average 5S implementation rate, which was 82.4%. The TITL workshop at SMK Negeri 2 Medan has also been managed effectively in the meantime. This is demonstrated by the average 5S implementation rate in the good category, which was 76.4%, and by the excellent administration of the TITL workshop at SMK Negeri 5 Medan. The average 5S implementation rate in the good category, which was 85.4%, makes this clear.Key Words: Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S) AbstrakPenelitian ini bertujuan untuk mengetahui penerapan Seiri, Seiton, Seiso, Seiketsu, Shitsuke (5S) dalam pengelolaan manajemen bengkel keahlian Teknik Instalasi Tenaga listrik (TITL)  SMK di kota Medan.Penelitian ini menggunakan metode penelitian deskriptif kualitatif. Objek penelitian ini adalah tiga bengkel praktik TITL di Sekolah Menengah Kejuruan yang berbeda yaitu: bengkel praktik TITL SMK Negeri 1 Percut Sei Tuan, bengkel praktik TITL SMK Negeri 2 Medan, dan bengkel praktik TITL SMK Negeri 5 Medan. Teknik pengumpulan data pada penelitian ini menggunakan observasi dan dokumen. Proses analisis data terdiri dari mereduksi data, menyajikan data, menyimpulkan dan analisis data kualitatif. Dari hasil penelitian dan pembahasan pelaksanaan Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke dalam pengelolaan  bengkel TITL di SMK Negeri 1 Percut Sei Tuan sudah terlaksana dengan sangat baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yaitu mencapai 82,4%. Sedangkan dalam pengelolaan bengkel TITL di SMK Negeri 2 Medan juga sudah terlaksana dengan baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori baik yaitu mencapai 76,4% dan untuk pengelolaan bengkel TITL di SMK Negeri 5 Medan juga sudah terlaksana dengan sangat baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yaitu mencapai 85,4%. Kata Kunci: Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S)
摘要本研究旨在探讨Seiri、Seiton、Seiso、Seiketsu、Shitsuke (5S)在SMK公司在棉兰的电力安装工程(TITL)车间管理中的应用。本研究采用定性描述研究方法。本研究的重点是在不同职业高中举办的三个TITL实践讲习班,特别是SMK Negeri 1 Percut Sei Tuan, SMK Negeri 2棉兰和SMK Negeri 5棉兰TITL实践讲习班。本研究采用观察和文字记录作为资料收集方法。数据分析过程的步骤是数据简化、数据表示、数据推理和定性数据的数据分析。根据分析和研究,Seiri、Seiton、Seiso、Seiketsu和Shitsuke在SMK Negeri 1 Percut Sei Tuan的TITL车间管理中成功实施。非常好的类别的5S执行率平均为82.4%。与此同时,在Negeri 2棉兰SMK的TITL讲习班也得到了有效的管理。良好类别的平均5S执行率为76.4%,SMK Negeri 5 Medan的TITL车间的出色管理证明了这一点。良好类别的5S执行率平均为85.4%,这一点很清楚。关键词:Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S)摘要:penelitian ini bertujuan untuk mengetahui penerapan Seiri, Seiton, Seiso, Seiketsu, Shitsuke (5S) dalam pengelolaan manajemen bengkel keahlian Teknik Instalasi Tenaga listrik (TITL) SMK di kota Medan。Penelitian的翻译结果:Penelitian的翻译结果:Objek penelitian ini adalah tiga bengkel praktik TITL di Sekolah Menengah Kejuruan yang berbeda yitu: bengkel praktik TITL SMK Negeri 1 Percut Sei Tuan, bengkel praktik TITL SMK Negeri 2棉兰,dan bengkel praktik TITL SMK Negeri 5棉兰。在孟古纳坎天文台观测到的人口普查数据。对分析数据进行分类分析,包括分析数据、分类分析数据、分类分析数据和定性分析数据。Dari hasil penelitian dan pembahasan pelaksanaan Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke dalam pengelolaan bengkel TITL di SMK Negeri 1 Percut Sei Tuan sudah terlaksana dengan sangat baik。Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yitu mencapai 82,4%。Sedangkan dalam pengelolaan bengkel TITL di SMK Negeri 2 Medan juga sudah terlaksana dengan baik。5 .中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:中文翻译:Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yitu mencapai 85,4%。Kata Kunci: Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S)
{"title":"ANALISIS MANAJEMEN BENGKEL SMK DI KOTA MEDAN BERBASIS 5S","authors":"Alvyn Zuhri, N. Sinaga","doi":"10.24114/jevte.v2i2.40580","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40580","url":null,"abstract":"AbstractThe purpose of this study is to ascertain how Seiri, Seiton, Seiso, Seiketsu, and Shitsuke (5S) are applied in the workshop management of SMK's electrical power installation engineering (TITL) competence in Medan. Methods of qualitative descriptive research are being used in this study. The focus of this study is on three TITL practice workshops held at various vocational high schools, specifically the SMK Negeri 1 Percut Sei Tuan, SMK Negeri 2 Medan, and SMK Negeri 5 Medan TITL practice workshops. In this study, observation and written records were utilized as data gathering methods. The steps in the data analysis process are data reduction, data presentation, data inference, and data analysis of qualitative data. According to analysis and research, Seiri, Seiton, Seiso, Seiketsu, and Shitsuke were successfully implemented in the management of the TITL workshop at SMK Negeri 1 Percut Sei Tuan. This is demonstrated by the very good category's average 5S implementation rate, which was 82.4%. The TITL workshop at SMK Negeri 2 Medan has also been managed effectively in the meantime. This is demonstrated by the average 5S implementation rate in the good category, which was 76.4%, and by the excellent administration of the TITL workshop at SMK Negeri 5 Medan. The average 5S implementation rate in the good category, which was 85.4%, makes this clear.Key Words: Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S) AbstrakPenelitian ini bertujuan untuk mengetahui penerapan Seiri, Seiton, Seiso, Seiketsu, Shitsuke (5S) dalam pengelolaan manajemen bengkel keahlian Teknik Instalasi Tenaga listrik (TITL)  SMK di kota Medan.Penelitian ini menggunakan metode penelitian deskriptif kualitatif. Objek penelitian ini adalah tiga bengkel praktik TITL di Sekolah Menengah Kejuruan yang berbeda yaitu: bengkel praktik TITL SMK Negeri 1 Percut Sei Tuan, bengkel praktik TITL SMK Negeri 2 Medan, dan bengkel praktik TITL SMK Negeri 5 Medan. Teknik pengumpulan data pada penelitian ini menggunakan observasi dan dokumen. Proses analisis data terdiri dari mereduksi data, menyajikan data, menyimpulkan dan analisis data kualitatif. Dari hasil penelitian dan pembahasan pelaksanaan Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke dalam pengelolaan  bengkel TITL di SMK Negeri 1 Percut Sei Tuan sudah terlaksana dengan sangat baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yaitu mencapai 82,4%. Sedangkan dalam pengelolaan bengkel TITL di SMK Negeri 2 Medan juga sudah terlaksana dengan baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori baik yaitu mencapai 76,4% dan untuk pengelolaan bengkel TITL di SMK Negeri 5 Medan juga sudah terlaksana dengan sangat baik. Hal ini terbukti dari rata-rata pelaksanaan 5S dalam kategori sangat baik yaitu mencapai 85,4%. Kata Kunci: Seiri, Seiton, Seiso, Seiketsu, dan Shitsuke (5S)","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115223578","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
PENGEMBANGAN INSTRUMEN EVALUASI BELAJAR COMPUTER BASED INTRUCTION (CBI) DENGAN MODEL DRILL INTERAKTIF SEBAGAI PROSES EVALUASI BELAJAR PADA MATA PELAJARAN SISTEM KOMPUTER 以交互式钻头模式为基础的计算机学习评估工具的开发,作为计算机系统课程的学习评估过程
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40584
Nuriati July, Muhammad Amin
AbstractThis research aims to find out how the development of computer based instruction (cbi) evaluation instruments with interactive drill models of computer system subjects in vocational schools and the feasibility of using computer based instruction (cbi) learning evaluation instruments with interactive drill models of computer system subjects in smk. This research was conducted on students of class X Majoring in Computer Engineering and Private Vocational Network Citra Abdi Negoro. Media development procedures are carried out by Research and Development methods or better known as R&D and use analysis design models, design, development, implementation and evaluation (ADDIE) but in the development of this research is limited at the implementation stage. Based on the data obtained during the study, validation results from the content expert get a final interpretation of (5,72) with very feasible criteria. Validation results from media experts get a final interpretation of (3,83) with decent criteria. In small group trials it was 82.20% and in large group trials it was 89.04%. From the practicality assessment obtained from the student's response to small and large group trials have the category "Excellent". The percentage of effectiveness gets an average of 0.86 with a high category. Thus the computer based intruction (cbi) learning evaluation instrument with this interactive drill model is feasible and effective to use and received positive responses from validator experts and users.Key Words: learning evaluation instruments, computer based intruction, interactive drill. AbstrakPenelitian ini bertujuan untuk mengetahui bagaimana pengembangan instrumen  evaluasi belajar computer based instruction (cbi) dengan model drill interaktif mata pelajaran system computer di smk dan kelayakan serta kepraktisan penggunaan terhadap instrumen evaluasi belajar computer based instruction (cbi) dengan model drill interaktif mata pelajaran system computer di smk. Penelitian ini dilakukan pada siswa kelas X Jurusan Teknik Komputer dan Jaringan SMK Swasta Citra Abdi Negoro. Prosedur pengembangan media dilakukan dengan metode Research and Development atau lebih dikenal dengan R&D dan menggunakan model desain pengembangan Analysis, Design, Development, Implementation and Evaluation (ADDIE) tetapi pada pengembangan penelitian ini dibatasi pada tahap implementation. Berdasarkan data yang didapat selama penelitian, Hasil validasi dari ahli isi/konten mendapatkan interpretasi akhir sebesar (5,72) dengan kriteria sangat layak. Hasil validasi dari ahli media mendapatkan interpretasi akhir sebesar (3,83) dengan kriteria layak. Pada uji coba kelompok kecil sebesar 82,20% dan pada uji coba kelompok  besar sebesar 89,04%. Dari penilaian kepraktisan yang diperoleh dari respon siswa pada uji coba kelompok kecil dan besar mempunyai katagori “Sangat Baik”. Persentase kefektifan mendapatkan rata-rata 0,86 dengan kategori tinggi. Dengan Demikian instrumen evaluasi belajar computer
摘要本研究旨在探讨高职院校计算机系统学科互动演练模式下的计算机教学(cbi)评价工具的开发,以及在smk应用计算机系统学科互动演练模式下的计算机教学(cbi)学习评价工具的可行性。本研究以计算机工程与私人职业网络专业X班学生为研究对象。媒体开发程序是通过研究与开发方法或更广为人知的研发和使用分析设计模型,设计,开发,实施和评估(ADDIE)进行的,但在开发中这种研究仅限于实施阶段。根据研究过程中获得的数据,内容专家的验证结果得到了(5,72)的最终解释,具有非常可行的标准。媒体专家的验证结果得到了(3,83)的最终解释。在小组试验中为82.20%,在大组试验中为89.04%。从学生对小群体和大群体试验的反应得出的实用性评价来看,有“优秀”的类别。效率百分比平均为0.86,类别较高。由此可见,基于该交互训练模型的计算机教学评价仪是可行的,使用起来是有效的,得到了验证专家和用户的积极响应。关键词:学习评价仪器,计算机教学,互动演练。摘要/ abstract摘要:penelitian ini bertujuan untuk mengetahui bagaimana penembangan仪器评估belajar计算机指令(cbi)登干模型钻井交互系统(cbi)计算机交互系统(cbi)彭干模型钻井交互系统(cbi)计算机交互系统。Penelitian ini dilakukan padsiswa kelas X Jurusan Teknik computer dan Jaringan SMK Swasta Citra Abdi Negoro。检察官彭彭邦媒体dilakakan dengan方法研究与开发atau lebih dikenkendengan研发和menggunakan模型设计彭彭邦分析、设计、开发、实施和评估(ADDIE)彭彭邦和penelitian dibatasi dachan dachan实施。Berdasarkan数据yang didapat selama penelitian, Hasil validasi dari ahli isi/konten mendapatkan interpretasi akhir sebesar (5,72), dengan kriteria sangat layak。[3][文献综述]。帕达乌吉科巴基隆波基基锡锡82,20%,但帕达乌吉科巴基隆波基基锡锡89,04%。巴基斯坦巴基斯坦人民解放军发言人说:“巴基斯坦人民解放军的反应是,巴基斯坦人民解放军的反应是,巴基斯坦人民解放军的反应是,巴基斯坦人民解放军的反应是。”[3] [j] .北京大学学报(自然科学版)。邓安德米克仪器评价:基于计算机指令(cbi)的邓安模型钻具相互作用的评价方法;邓安德米克钻具相互作用的评价方法;邓安德米克钻具相互作用的评价方法;邓安德米克钻具相互作用的评价方法;卡塔昆兹:仪器评估、计算机教学、钻机交互
{"title":"PENGEMBANGAN INSTRUMEN EVALUASI BELAJAR COMPUTER BASED INTRUCTION (CBI) DENGAN MODEL DRILL INTERAKTIF SEBAGAI PROSES EVALUASI BELAJAR PADA MATA PELAJARAN SISTEM KOMPUTER","authors":"Nuriati July, Muhammad Amin","doi":"10.24114/jevte.v2i2.40584","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40584","url":null,"abstract":"AbstractThis research aims to find out how the development of computer based instruction (cbi) evaluation instruments with interactive drill models of computer system subjects in vocational schools and the feasibility of using computer based instruction (cbi) learning evaluation instruments with interactive drill models of computer system subjects in smk. This research was conducted on students of class X Majoring in Computer Engineering and Private Vocational Network Citra Abdi Negoro. Media development procedures are carried out by Research and Development methods or better known as R&D and use analysis design models, design, development, implementation and evaluation (ADDIE) but in the development of this research is limited at the implementation stage. Based on the data obtained during the study, validation results from the content expert get a final interpretation of (5,72) with very feasible criteria. Validation results from media experts get a final interpretation of (3,83) with decent criteria. In small group trials it was 82.20% and in large group trials it was 89.04%. From the practicality assessment obtained from the student's response to small and large group trials have the category \"Excellent\". The percentage of effectiveness gets an average of 0.86 with a high category. Thus the computer based intruction (cbi) learning evaluation instrument with this interactive drill model is feasible and effective to use and received positive responses from validator experts and users.Key Words: learning evaluation instruments, computer based intruction, interactive drill. AbstrakPenelitian ini bertujuan untuk mengetahui bagaimana pengembangan instrumen  evaluasi belajar computer based instruction (cbi) dengan model drill interaktif mata pelajaran system computer di smk dan kelayakan serta kepraktisan penggunaan terhadap instrumen evaluasi belajar computer based instruction (cbi) dengan model drill interaktif mata pelajaran system computer di smk. Penelitian ini dilakukan pada siswa kelas X Jurusan Teknik Komputer dan Jaringan SMK Swasta Citra Abdi Negoro. Prosedur pengembangan media dilakukan dengan metode Research and Development atau lebih dikenal dengan R&D dan menggunakan model desain pengembangan Analysis, Design, Development, Implementation and Evaluation (ADDIE) tetapi pada pengembangan penelitian ini dibatasi pada tahap implementation. Berdasarkan data yang didapat selama penelitian, Hasil validasi dari ahli isi/konten mendapatkan interpretasi akhir sebesar (5,72) dengan kriteria sangat layak. Hasil validasi dari ahli media mendapatkan interpretasi akhir sebesar (3,83) dengan kriteria layak. Pada uji coba kelompok kecil sebesar 82,20% dan pada uji coba kelompok  besar sebesar 89,04%. Dari penilaian kepraktisan yang diperoleh dari respon siswa pada uji coba kelompok kecil dan besar mempunyai katagori “Sangat Baik”. Persentase kefektifan mendapatkan rata-rata 0,86 dengan kategori tinggi. Dengan Demikian instrumen evaluasi belajar computer ","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122560805","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
HUBUNGAN ANTARA PRODUKTIVITAS DAN KREATIVITAS GURU DALAM MENGAJAR DENGAN MINAT BELAJAR PESERTA DIDIK PADA MASA PANDEMI COVID-19 DI SMK 生产力与教师在教学方面的创造性与学习者在SMK的COVID-19大流行期间的兴趣的关系
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40581
Betaria Sitanggang, Muhammad Amin
AbstractThis study aims to determine: (1) the relationship between teacher productivity in teaching and students' interest in learning during the covid-19 pandemic; (2) the relationship between teacher creativity in teaching and students' interest in learning during the covid-19 pandemic; (3) the relationship between teacher productivity and creativity in teaching and students' interest in learning during the covid-19 pandemic. The research method used is ex post facto. The population in this study amounted to 75 respondents with a sample of 63 respondents who were taken through the Purposesive Sampling technique. Prerequisite tests used in this study include normality test, linearity test, multiple regression coefficient test. Hypothesis testing includes partial test (t test), simultaneous test (F test), hypothesis test 1, hypothesis test 2 and hypothesis test 3. Data collection is done by means of observation and distributing questionnaires. The research questionnaire was first tested for validity and reliability. Then the data collected was processed with the help of Ms. Excel and SPSS version 22 software. The results of this study prove that: (1) There is a relationship between teacher productivity in teaching and students' interest in learning with the results of the research that the correlation coefficient of 0.595 is greater at the significance level of 0.05 or 5%. (2) There is a relationship between teacher creativity in teaching and students' interest in learning with the results of the research the correlation coefficient of 0.593 is greater at the significance level of 0.05 or 5%. (3) There is a relationship between teacher productivity and creativity in teaching and students' interest in learning with the results of the F test calculation, the Fcount value is 22.850 and Ftable is 2.76. Thus the Fcount > Ftable (22.850 > 2.76) and the significance value (0.000 < 0.05).Key Words: Teacher Productivity, Teacher Creativity, Students' Interest in Learning. AbstrakPenelitian ini bertujua untuk mengetahui: (1) hubungan produktivitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19; (2) hubungan kreativitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19; (3) hubungan produktivitas dan kreativitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19. Metode penelitian yang digunakan yaitu ex post facto. Populasi dalam penelitian ini berjumlah 75 responden dengan sampel sebanyak 63 responden yang diambil melalui teknik Purposesive Sampling. Uji prasyarat yang digunakan dalam penelitian ini meliputi uji normaltas, uji lineritas, uji koefisien regresi ganda. Uji hipotesis meliputi uji parsial (uji t), uji simultan (uji F), uji hipotesis 1, uji hipotesis 2 dan uji hipotesis 3. Pengumpulan data dilakukan dengan cara observasi dan penyebaran angket. Angket penelitian terlebih dahulu diuji validitas dan reliabilitas. Kemudian data yang terkumpul diolah de
摘要本研究旨在确定:(1)新冠肺炎疫情期间教师教学生产力与学生学习兴趣的关系;(2)新冠肺炎疫情期间教师教学创造力与学生学习兴趣的关系;(3)新冠肺炎疫情期间教师生产力、教学创造力与学生学习兴趣的关系。使用的研究方法是事后的。本研究的人口总数为75名受访者,其中63名受访者的样本是通过有目的抽样技术采取的。本研究采用的前提检验包括正态性检验、线性检验、多元回归系数检验。假设检验包括偏检验(t检验)、同时检验(F检验)、假设检验1、假设检验2和假设检验3。数据收集是通过观察和分发问卷的方式完成的。首先对研究问卷进行了效度和信度检验。然后利用Ms. Excel和SPSS 22软件对收集到的数据进行处理。本研究结果证明:(1)教师的教学生产力与学生的学习兴趣之间存在一定的相关关系,研究结果显示,在0.05或5%的显著性水平下,相关系数0.595更大。(2)教师的教学创造力与学生的学习兴趣之间存在一定的关系,研究结果显示,在0.05或5%的显著性水平下,相关系数0.593更大。(3) F检验计算结果表明,教师生产力、教学创造力与学生学习兴趣之间存在一定的关系,Fcount值为22.850,Ftable值为2.76。因此Fcount > Ftable(22.850 > 2.76),显著性值(0.000 < 0.05)。关键词:教师生产力,教师创造力,学生学习兴趣(1)云南省流行性感冒(covid-19)流行病学调查结果;(2)防治新冠肺炎疫情;(3)预防新型冠状病毒肺炎(covid-19)。事后诸葛复明,事后诸葛复明。有目的抽样:75人被调查者登根抽样;63人被调查者杨杨抽样。Uji prasyarat yang digunakan dalam penelitian ini meliputi Uji normaltas, Uji lineeritas, Uji koefisien regi ganda。Uji hipoesis meliliputi Uji parsial (Uji t), Uji simultan (Uji F), Uji hipoesis 1, Uji hipoesis 2和Uji hipoesis 3。彭普兰的数据是由彭普兰、彭普兰和彭普兰观测得来的。从有效性和可靠性两个方面分析。Kemudian数据yang terkumpul diolah dunbar bantuan女士Excel dan软件SPSS version 22。(1) Adanya Hubungan antara producktivitas guru dalam mengajar dengan minat belajar peserta didik dengan Hasil penelitian koefisien korelasi sebesar 0,595 lebih besar pada taraf signifikansi sebesar 0,05 - 5%。(2) Adanya Hubungan antara kreativitas guru dalam mengajar terhadap minat belajar peserta didik dengan hasil penelitian koefisien korelasi sebesar 0,593 lebih besar padtaraf signifikansi sebesar 0,05 - 5%。(3) Adanya Hubungan antara producktivitas dan kreativitas guru dalam mengajar dengan minat belajar peserta didik dengan hasil perhitungan uji F diperoleh nilai Fhitung sebesar 22,850 dan Ftabel sebesar 2,76。邓安demikian nilai Fhitung > Ftabel(22,850 > 2,76),但nilai显著性(0,000 < 0,05)。Kata Kunci: producktivitas Guru, Kreativitas Guru, Minat Belajar Peserta Didik
{"title":"HUBUNGAN ANTARA PRODUKTIVITAS DAN KREATIVITAS GURU DALAM MENGAJAR DENGAN MINAT BELAJAR PESERTA DIDIK PADA MASA PANDEMI COVID-19 DI SMK","authors":"Betaria Sitanggang, Muhammad Amin","doi":"10.24114/jevte.v2i2.40581","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40581","url":null,"abstract":"AbstractThis study aims to determine: (1) the relationship between teacher productivity in teaching and students' interest in learning during the covid-19 pandemic; (2) the relationship between teacher creativity in teaching and students' interest in learning during the covid-19 pandemic; (3) the relationship between teacher productivity and creativity in teaching and students' interest in learning during the covid-19 pandemic. The research method used is ex post facto. The population in this study amounted to 75 respondents with a sample of 63 respondents who were taken through the Purposesive Sampling technique. Prerequisite tests used in this study include normality test, linearity test, multiple regression coefficient test. Hypothesis testing includes partial test (t test), simultaneous test (F test), hypothesis test 1, hypothesis test 2 and hypothesis test 3. Data collection is done by means of observation and distributing questionnaires. The research questionnaire was first tested for validity and reliability. Then the data collected was processed with the help of Ms. Excel and SPSS version 22 software. The results of this study prove that: (1) There is a relationship between teacher productivity in teaching and students' interest in learning with the results of the research that the correlation coefficient of 0.595 is greater at the significance level of 0.05 or 5%. (2) There is a relationship between teacher creativity in teaching and students' interest in learning with the results of the research the correlation coefficient of 0.593 is greater at the significance level of 0.05 or 5%. (3) There is a relationship between teacher productivity and creativity in teaching and students' interest in learning with the results of the F test calculation, the Fcount value is 22.850 and Ftable is 2.76. Thus the Fcount > Ftable (22.850 > 2.76) and the significance value (0.000 < 0.05).Key Words: Teacher Productivity, Teacher Creativity, Students' Interest in Learning. AbstrakPenelitian ini bertujua untuk mengetahui: (1) hubungan produktivitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19; (2) hubungan kreativitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19; (3) hubungan produktivitas dan kreativitas guru dalam mengajar dengan minat belajar peserta didik pada masa pandemi covid-19. Metode penelitian yang digunakan yaitu ex post facto. Populasi dalam penelitian ini berjumlah 75 responden dengan sampel sebanyak 63 responden yang diambil melalui teknik Purposesive Sampling. Uji prasyarat yang digunakan dalam penelitian ini meliputi uji normaltas, uji lineritas, uji koefisien regresi ganda. Uji hipotesis meliputi uji parsial (uji t), uji simultan (uji F), uji hipotesis 1, uji hipotesis 2 dan uji hipotesis 3. Pengumpulan data dilakukan dengan cara observasi dan penyebaran angket. Angket penelitian terlebih dahulu diuji validitas dan reliabilitas. Kemudian data yang terkumpul diolah de","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"151 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131988192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF BERBASIS ANDROID MENGGUNAKAN ISPRING DAN APK BUILDER 采用ISPRING和APK构建器的ANDROID交互学习媒体开发
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40541
Dhea Putri Pratiwi Br Ginting, Sahat Siagian
AbstractThe purpose of this study was to determine the feasibility level of Android-Based Interactive Learning Media Using iSpring and APK Builder for Physical Education Subjects, Sports and Health. The research method used in this research is the Research and Development (R&D) method. In this study using the ADDIE model. The data collection technique used in this research is a questionnaire given to material experts, media experts, design experts and users which aims to determine the quality of the learning media that have been made. The results of the validation of this media development fall into the VERY DECENT category seen from the results of the material validation test carried out by 2 experts who got an average score of 4.54 with the "Very Eligible" category. The results of the media validation test conducted by 2 experts got an average score of 4.34 in the "Very Eligible" category, and for design expert validation carried out by 2 experts, the average score was 4.33 in the "Very Eligible" category. . And for the acceptability test, it was done by testing small trials as well as large trials on interactive learning media. Small trials conducted by 10 students got an average score of 4.29 in the "Very Eligible" category, and large trials conducted by 20 students got an average score of 4.32 in the "Very Eligible" category. Thus the android-based interactive learning media using iSpring and APK Builder is very suitable for use in learning physical education, sports and health, especially for seventh grade students of SMP Swasta Dewantara.Keywords: Learn, Learning Media, Android, iSpring, Website 2 APK Builder AbstrakTujuan dari penelitian ini adalah untuk mengetahui tingkat kelayakan Media Pembelajaran Interaktif Berbasis Android  Menggunakan iSpring dan APK Builder Untuk Mata Pelajaran Pendidikan Jasmani Olahraga dan Kesehatan. Metode penelitian yang digunakan dalam penelitian ini adalah metode Research and Development (R&D). Dalam penelitian ini menggunakan model ADDIE. Teknik pengumpulan data yang dilakukan dalam penelitian ini adalah angket yang diberikan kepada ahli materi, ahli media, ahli desain dan pengguna yang bertujuan untuk mengetahui kualitas media pembelajaran yang sudah dibuat. Hasil validasi pengembangan media ini masuk kedalam kategori “Sangat Layak” dilihat dari hasil uji validasi materi yang dilakukan oleh 2 orang ahli mendapat rata-rata skor sebesar 4,54 dengan ketegori “Sangat Layak”. Hasil uji validasi media yang dilakukan oleh 2 orang ahli mendapat rata-rata skor sebesar 4,34 dengan kategori “Sangat Layak”, dan untuk validasi ahli desain dilakukan oleh 2 orang ahli mendapat rata-rata skor 4,33 dengan kategori “Sangat Layak” . Dan untuk uji akseptabilitas dilakukan dengan menguji coba kecil juga uji coba besar pada media pembelajaran interaktif. Untuk uji coba kecil yang dilakukan oleh 10 siswa mendapatkan rata-rata-rata skor 4,29 dengan kategori “Sangat Layak”, serta uji coba besar yang dilakukan oleh 20 siswa mendap
摘要本研究旨在探讨利用isspring和APK Builder开发基于android的体育学科、运动与健康互动学习媒体的可行性。本研究使用的研究方法是研究与开发(R&D)方法。本研究采用ADDIE模型。本研究使用的数据收集技术是对材料专家、媒体专家、设计专家和用户进行问卷调查,目的是确定已经制作的学习媒体的质量。从2位专家进行的材料验证测试结果来看,该媒体开发的验证结果属于VERY DECENT类别,平均得分为4.54分,属于“非常合格”类别。2位专家进行的媒体验证测试结果在“非常合格”类别中平均得分为4.34分,2位专家进行的设计专家验证在“非常合格”类别中平均得分为4.33分。而可接受性测试则是通过在互动学习媒体上进行小型试验和大型试验来完成的。10名学生进行的小型试验在“非常合格”类别中平均得分为4.29分,20名学生进行的大型试验在“非常合格”类别中平均得分为4.32分。因此,使用isspring和APK Builder的基于android的互动学习媒体非常适合用于学习体育,运动和健康,特别是SMP Swasta dewanara的七年级学生。关键词:Learn, Learning Media, Android, isspring, Website 2 APK Builder摘要:tujuan dari penelitian ini adalah untuk mengetahui tingkat kelayakan Media pembelajan Interaktif Berbasis Android Menggunakan isspring和APK Builder untuk Mata Pelajaran Pendidikan Jasmani Olahraga dan KesehatanMetode penelitian yang digunakan dalam penelitian ini adalah方法研究与开发(R&D)。Dalam penelitian ini menggunakan模型ADDIE。penbelajaran yang sudah dibuat.技术数据杨dilakukan dalam penelitian ini adalah angket杨diberikkan kepada, ahli media, ahli desain dan pengguna杨berakukan untuk mengetahui kualitas media penbelajanyang sudah dibuat。1 .在印度,有媒体报道“Sangat Layak”,有媒体报道“Sangat Layak”,有媒体报道“Sangat Layak”。Hasil uji validasi media yang dilakukan oleh 2 orang ahli mendapat rata-rata skor sebesar 4,34 dengan kategori“Sangat Layak”,dan untuk validasi ahli desain dilakukan oleh 2 orang ahli mendapat rata-rata skor 4,33 dengan kategori“Sangat Layak”。旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦旦Untuk uji coba kecil yang dilakukan oleh 10 siswa mendapatkan rata-rata-rata skor 4,29 dengan kategori“Sangat Layak”,serta uji coba besar yang dilakukan oleh 20 siswa mendapatkan rata-rata skor 4,32 dengan kategori“Sangat Layak”。邓干德米克媒体,pembelajan interaktif berbasis, android menggunakan isspring, dan APK Builder, sangat layak digunakan dalam, pembelajan pendidikan, jasmani olahraga, dan kesehatan, khususnya siswa kelas。Kata Kunci: Belajar, Media Pembelajaran, Android, isspring, Website 2 APK Builder。
{"title":"PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF BERBASIS ANDROID MENGGUNAKAN ISPRING DAN APK BUILDER","authors":"Dhea Putri Pratiwi Br Ginting, Sahat Siagian","doi":"10.24114/jevte.v2i2.40541","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40541","url":null,"abstract":"AbstractThe purpose of this study was to determine the feasibility level of Android-Based Interactive Learning Media Using iSpring and APK Builder for Physical Education Subjects, Sports and Health. The research method used in this research is the Research and Development (R&D) method. In this study using the ADDIE model. The data collection technique used in this research is a questionnaire given to material experts, media experts, design experts and users which aims to determine the quality of the learning media that have been made. The results of the validation of this media development fall into the VERY DECENT category seen from the results of the material validation test carried out by 2 experts who got an average score of 4.54 with the \"Very Eligible\" category. The results of the media validation test conducted by 2 experts got an average score of 4.34 in the \"Very Eligible\" category, and for design expert validation carried out by 2 experts, the average score was 4.33 in the \"Very Eligible\" category. . And for the acceptability test, it was done by testing small trials as well as large trials on interactive learning media. Small trials conducted by 10 students got an average score of 4.29 in the \"Very Eligible\" category, and large trials conducted by 20 students got an average score of 4.32 in the \"Very Eligible\" category. Thus the android-based interactive learning media using iSpring and APK Builder is very suitable for use in learning physical education, sports and health, especially for seventh grade students of SMP Swasta Dewantara.Keywords: Learn, Learning Media, Android, iSpring, Website 2 APK Builder AbstrakTujuan dari penelitian ini adalah untuk mengetahui tingkat kelayakan Media Pembelajaran Interaktif Berbasis Android  Menggunakan iSpring dan APK Builder Untuk Mata Pelajaran Pendidikan Jasmani Olahraga dan Kesehatan. Metode penelitian yang digunakan dalam penelitian ini adalah metode Research and Development (R&D). Dalam penelitian ini menggunakan model ADDIE. Teknik pengumpulan data yang dilakukan dalam penelitian ini adalah angket yang diberikan kepada ahli materi, ahli media, ahli desain dan pengguna yang bertujuan untuk mengetahui kualitas media pembelajaran yang sudah dibuat. Hasil validasi pengembangan media ini masuk kedalam kategori “Sangat Layak” dilihat dari hasil uji validasi materi yang dilakukan oleh 2 orang ahli mendapat rata-rata skor sebesar 4,54 dengan ketegori “Sangat Layak”. Hasil uji validasi media yang dilakukan oleh 2 orang ahli mendapat rata-rata skor sebesar 4,34 dengan kategori “Sangat Layak”, dan untuk validasi ahli desain dilakukan oleh 2 orang ahli mendapat rata-rata skor 4,33 dengan kategori “Sangat Layak” . Dan untuk uji akseptabilitas dilakukan dengan menguji coba kecil juga uji coba besar pada media pembelajaran interaktif. Untuk uji coba kecil yang dilakukan oleh 10 siswa mendapatkan rata-rata-rata skor 4,29 dengan kategori “Sangat Layak”, serta uji coba besar yang dilakukan oleh 20 siswa mendap","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125306091","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
HUBUNGAN PROKRASTINASI, SOCIAL SUPPORT, DAN SELF EFFICACY DENGAN MINAT BERWIRAUSAHA SISWA 促进关系、社会支持和自我为中心的学生利益
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40542
A. Lubis, W. Pangaribuan
AbstractThis study aims to determine the relationship: 1) Procrastination, Social Support, and Self Efficacy with Interest in Entrepreneurship, 2) Procrastination with Interest in Entrepreneurship, 3) Social Support with Interest in Entrepreneurship, 4) Self Efficacy with Interest in Entrepreneurship. This research is a quantitative research, the population in this study are students of SMK Negeri 1 Percut Sei Tuan. The sampling technique used is purposive sampling with a total sample of 92 students. The data collection technique is in the form of a questionnaire. The data analysis technique used is multiple linear regression analysis, hypothesis testing, analysis prerequisite test. The results showed that: 1) There was a negative relationship between procrastination and interest in entrepreneurship. 2) There is a positive and significant relationship between social support and interest in entrepreneurship. 3) There is a positive and significant relationship between self-efficacy and interest in entrepreneurship. 4) There is a joint relationship between procrastination, social support and self-efficacy with interest in entrepreneurshipKeywords: procrastination, social support, self efficacy, enterpreneurship AbstrakPenelitian ini bertujuan untuk mengetahui hubungan : 1) Prokrastinasi, Social Support, Dan Self Efficacy Dengan Minat Berwirausaha, 2) Prokrastinasi dengan Minat Berwirausaha, 3) Social Support dengan Minat Berwirausaha, 4) Self Efficacy dengan Minat Berwirausaha. Penelitian ini merupakan penelitian kuantitatif dengan metode korelasi, populasi dalam penelitian ini adalah siswa SMK Negeri 1 Percut Sei tuan. Teknik sampling yang digunakan adalah purposive sampling dengan jumlah sampel sebanyak 92 siswa. Teknik pengumpulan data menggunakan angket. Teknik analisis data yang digunakan adalah analisis regresi linier ganda, pengujian hipotesis, uji prasyarat analisis. Hasil penelitian menunjukkan bahwa : 1) Terdapat hubungan negatif antara prokrastinasi dengan minat berwirausaha. 2) Terdapat hubungan positif dan signifikan antara social support dengan minat berwirausaha. 3) Terdapat hubungan positif dan signifikan antara self efficacy dengan minat berwirausaha. 4) Terdapat hubungan bersama-sama prokrastinasi, social support dan self efficacy dengan minat berwirausaha.Kata Kunci: Prokrastinasi, Social Support, Self Efficacy, Minat Berwirausaha
摘要本研究旨在确定拖延症、社会支持、自我效能感与创业兴趣的关系,2)拖延症与创业兴趣的关系,3)社会支持与创业兴趣的关系,4)自我效能感与创业兴趣的关系。本研究为定量研究,研究对象为SMK Negeri 1 Percut Sei Tuan的学生。抽样方法为有目的抽样,共抽样92名学生。数据收集技术采用问卷调查的形式。采用的数据分析技术是多元线性回归分析、假设检验、分析前提检验。结果表明:1)拖延与创业兴趣呈负相关。2)社会支持与创业兴趣之间存在显著正相关关系。3)自我效能感与创业兴趣之间存在显著正相关关系。4)拖延症、社会支持、自我效能感与创业兴趣之间存在联合关系。关键词:拖延症、社会支持、自我效能感、创业兴趣。摘要:1)拖延症、社会支持、自我效能感;2)拖延症、社会支持、自我效能感;3)拖延症、社会支持、自我效能感。Penelitian ini merupakan Penelitian kuantitatif dengan方法korelasi, populasi dalam Penelitian ini adalah siswa SMK Negeri 1 Percut Sei tuan。技术取样杨迪库纳坎adalah目的取样登甘jumlah样本塞巴尼亚克92 siswa。中国人口普查数据统计。技术分析数据yang digunakan adalah分析regression linier ganda, penguin hipoesis, uji prasarat分析。Hasil penelitian menunjukkan bahwa: 1) Terdapat hubungan negative antara prokrstinasi dengan minat berwirusaha。(2)社会支持水平显著提高,社会支持水平显著提高。3)自我效能感与心理健康的关系呈显著正相关。4)社会支持与自我效能感的关系与自我效能感的关系。Kata Kunci:延迟,社会支持,自我效能,Minat Berwirausaha
{"title":"HUBUNGAN PROKRASTINASI, SOCIAL SUPPORT, DAN SELF EFFICACY DENGAN MINAT BERWIRAUSAHA SISWA","authors":"A. Lubis, W. Pangaribuan","doi":"10.24114/jevte.v2i2.40542","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40542","url":null,"abstract":"AbstractThis study aims to determine the relationship: 1) Procrastination, Social Support, and Self Efficacy with Interest in Entrepreneurship, 2) Procrastination with Interest in Entrepreneurship, 3) Social Support with Interest in Entrepreneurship, 4) Self Efficacy with Interest in Entrepreneurship. This research is a quantitative research, the population in this study are students of SMK Negeri 1 Percut Sei Tuan. The sampling technique used is purposive sampling with a total sample of 92 students. The data collection technique is in the form of a questionnaire. The data analysis technique used is multiple linear regression analysis, hypothesis testing, analysis prerequisite test. The results showed that: 1) There was a negative relationship between procrastination and interest in entrepreneurship. 2) There is a positive and significant relationship between social support and interest in entrepreneurship. 3) There is a positive and significant relationship between self-efficacy and interest in entrepreneurship. 4) There is a joint relationship between procrastination, social support and self-efficacy with interest in entrepreneurshipKeywords: procrastination, social support, self efficacy, enterpreneurship AbstrakPenelitian ini bertujuan untuk mengetahui hubungan : 1) Prokrastinasi, Social Support, Dan Self Efficacy Dengan Minat Berwirausaha, 2) Prokrastinasi dengan Minat Berwirausaha, 3) Social Support dengan Minat Berwirausaha, 4) Self Efficacy dengan Minat Berwirausaha. Penelitian ini merupakan penelitian kuantitatif dengan metode korelasi, populasi dalam penelitian ini adalah siswa SMK Negeri 1 Percut Sei tuan. Teknik sampling yang digunakan adalah purposive sampling dengan jumlah sampel sebanyak 92 siswa. Teknik pengumpulan data menggunakan angket. Teknik analisis data yang digunakan adalah analisis regresi linier ganda, pengujian hipotesis, uji prasyarat analisis. Hasil penelitian menunjukkan bahwa : 1) Terdapat hubungan negatif antara prokrastinasi dengan minat berwirausaha. 2) Terdapat hubungan positif dan signifikan antara social support dengan minat berwirausaha. 3) Terdapat hubungan positif dan signifikan antara self efficacy dengan minat berwirausaha. 4) Terdapat hubungan bersama-sama prokrastinasi, social support dan self efficacy dengan minat berwirausaha.Kata Kunci: Prokrastinasi, Social Support, Self Efficacy, Minat Berwirausaha","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127252687","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
PENGEMBANGAN TRAINER CONVEYOR MENGGUNAKAN OUTSEAL PLC PADA MATA PELAJARAN INSTALASI MOTOR LISTRIK 培训师沟通部门在电动机安装过程中使用了PLC外印章
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40540
Rizki Fauzan, Dadan Mulyana
AbstractStudy this aim for produce Trainer Conveyor using outseal PLC as a learning medium and to determine the suitability and effectiveness of using Trainer and PLC learning modules on eye lesson Electric Motor Installation at SMK Negeri I Percut Sei Tuan . Study this including type study development , that is research used _ for make product and test effectiveness from results product that . Study this aim for know what is a System Trainer Electric Motor Control worthy used on learning Electric Motor Installation . Study this done on student class XI Department Technique Installation Energy Utilization Electricity at SMK Negeri 1 Percut Sei Tuan . Procedure media development is done with Research and Development method or more known with R&D and using design models Analysis, Design, Development, Implementation and Evaluation (ADDIE) development. Based on the data obtained During research, results validation from media expert and Theory then learning media this declared fulfil condition and worthy used as a learning medium proved from results evaluation appropriateness expert Theory get category appropriateness very worthy with average percentage 90.625% , result evaluation appropriateness from media experts get category appropriateness very worthy with average percentage 87,25%. With thus learning media development very good done with see mark from validator experts and also response positive that supports learning media . Keywords: Trainer, Conveyor, Outseal PLC, Electric Motor Installation , SMK Negeri 1 Percut Sei Tuan . AbstrakPenelitian ini bertujuan untuk menghasilkan Trainer Conveyor menggunakan outseal PLC sebagai media pembelajaran dan untuk mengetahui dan efektifitas penggunaan Trainer dan modul pembelajaran PLC pada mata pelajaran Instalasi Motor Listrik SMK Negeri I Percut Sei Tuan. Penelitian ini termasuk jenis penelitian pengembangan , yaitu penelitian yang digunakan untuk membuat produk dan menguji keefektifan dari hasil produk tersebut . penelitian ini bertujuan untuk mengetahui apakah Sistem Pelatih Kendali Motor Listrik layak digunakan pada pembelajaran Instalasi Motor Listrik . penelitian ini dilakukan pada siswa kelas XI Jurusan Teknik Instalasi Pemanfaatan Tenaga Listrik SMK Negeri 1 Percut Sei Tuan . Prosedur pengembangan media dilakukan dengan metode Penelitian dan Pengembangan atau lebih dikenal dengan R&D dan menggunakan model desain pengembangan Analisis, Desain, Pengembangan, Implementasi dan Evaluasi (ADDIE). Berdasarkan data yang didapat selama penelitian , hasil validasi dari ahli media dan bahan maka media pembelajaran ini dinyatakan memenuhi persyaratan dan layak digunakan sebagai media pembelajaran dibuktikan dari hasil  validasi oleh ahli materi dengan memperoleh nilai persentase sebesar 90,625% , dan hasil validasi dari ahli media dengan nilai persentase 87,25%. Dengan demikian pengembangan media pembelajaran sangat baik dilakukan dengan melihat nilai dari para ahli validator dan juga tanggapan positif yang m
摘要以外封式PLC为学习介质生产培训机输送机为研究对象,确定培训机和PLC学习模块在SMK Negeri I Percut Sei Tuan的眼课电机安装中的适用性和有效性。研究这包括类型研究的开发,即研究用于制造产品和从结果测试产品的有效性。本文的研究目的是为了了解什么是电机控制系统训练器,值得在电机安装学习中使用。程序媒体开发是通过研究和开发方法完成的,或者更广为人知的是研发和使用设计模型分析,设计,开发,实施和评估(ADDIE)开发。根据研究过程中获得的数据,由媒体专家和理论进行结果验证,然后由结果评价适宜性专家理论证明,这一宣布符合条件和值得作为学习媒介使用的学习媒体得到类别适宜性,平均百分比为90.625%,媒体专家结果评价适宜性得到类别适宜性,平均百分比为86.7%。因此,学习媒体的发展非常好,看到了验证专家的标记,也积极响应支持学习媒体。关键词:训练机,输送机,Outseal PLC,电机安装,SMK Negeri 1 Percut Sei Tuan。摘要:penelitian ini bertujuan untuk menghasilkan训练机输送机menggunakan outseal PLC sebagai media pembelajaran danuntuk mengetahui danefektifitas penggunaan训练机模块pembelajaran PLC pada mata pelajaran安装Motor listriker SMK Negeri Percut Sei Tuan。Penelitian ini termasuk jenis Penelitian pengembangan, yitu Penelitian yang digunakan untuk成员产品dan menguji keefektifan dari hasil产品tersebut。penelitian ini bertujuan untuk mengetahui apakah系统Pelatih Kendali Motor listrike(汽车罢工)检察员,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体Berdasarkan data yang didapat selama penelitian, hasil validasi dari ahli media dan bahan maka media pembelajaran ini dinyatakan memenuhi persyaran danlayak digunakan sebagai media pembelajan dibuktikan dari hasil validasi oleh ahli materi denan memperoleh nilai persar, danhasil validasi dari ahli media denan nilai persar, 87,25%。邓加德米克,彭彭邦媒体,彭彭邦媒体,彭彭邦媒体,桑加特,迪拉库坎,邓加德彭邦媒体,尼加德潘邦,尼加德潘邦,帕拉克,验证者,丹加,唐加邦,阳,门都坤媒体,彭彭邦。Kata Kunci:训练器,输送机,PLC Outseal,安装马达,SMK Negeri 1 Percut Sei Tuan。
{"title":"PENGEMBANGAN TRAINER CONVEYOR MENGGUNAKAN OUTSEAL PLC PADA MATA PELAJARAN INSTALASI MOTOR LISTRIK","authors":"Rizki Fauzan, Dadan Mulyana","doi":"10.24114/jevte.v2i2.40540","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40540","url":null,"abstract":"AbstractStudy this aim for produce Trainer Conveyor using outseal PLC as a learning medium and to determine the suitability and effectiveness of using Trainer and PLC learning modules on eye lesson Electric Motor Installation at SMK Negeri I Percut Sei Tuan . Study this including type study development , that is research used _ for make product and test effectiveness from results product that . Study this aim for know what is a System Trainer Electric Motor Control worthy used on learning Electric Motor Installation . Study this done on student class XI Department Technique Installation Energy Utilization Electricity at SMK Negeri 1 Percut Sei Tuan . Procedure media development is done with Research and Development method or more known with R&D and using design models Analysis, Design, Development, Implementation and Evaluation (ADDIE) development. Based on the data obtained During research, results validation from media expert and Theory then learning media this declared fulfil condition and worthy used as a learning medium proved from results evaluation appropriateness expert Theory get category appropriateness very worthy with average percentage 90.625% , result evaluation appropriateness from media experts get category appropriateness very worthy with average percentage 87,25%. With thus learning media development very good done with see mark from validator experts and also response positive that supports learning media . Keywords: Trainer, Conveyor, Outseal PLC, Electric Motor Installation , SMK Negeri 1 Percut Sei Tuan . AbstrakPenelitian ini bertujuan untuk menghasilkan Trainer Conveyor menggunakan outseal PLC sebagai media pembelajaran dan untuk mengetahui dan efektifitas penggunaan Trainer dan modul pembelajaran PLC pada mata pelajaran Instalasi Motor Listrik SMK Negeri I Percut Sei Tuan. Penelitian ini termasuk jenis penelitian pengembangan , yaitu penelitian yang digunakan untuk membuat produk dan menguji keefektifan dari hasil produk tersebut . penelitian ini bertujuan untuk mengetahui apakah Sistem Pelatih Kendali Motor Listrik layak digunakan pada pembelajaran Instalasi Motor Listrik . penelitian ini dilakukan pada siswa kelas XI Jurusan Teknik Instalasi Pemanfaatan Tenaga Listrik SMK Negeri 1 Percut Sei Tuan . Prosedur pengembangan media dilakukan dengan metode Penelitian dan Pengembangan atau lebih dikenal dengan R&D dan menggunakan model desain pengembangan Analisis, Desain, Pengembangan, Implementasi dan Evaluasi (ADDIE). Berdasarkan data yang didapat selama penelitian , hasil validasi dari ahli media dan bahan maka media pembelajaran ini dinyatakan memenuhi persyaratan dan layak digunakan sebagai media pembelajaran dibuktikan dari hasil  validasi oleh ahli materi dengan memperoleh nilai persentase sebesar 90,625% , dan hasil validasi dari ahli media dengan nilai persentase 87,25%. Dengan demikian pengembangan media pembelajaran sangat baik dilakukan dengan melihat nilai dari para ahli validator dan juga tanggapan positif yang m","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"271 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132032182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
PENGEMBANGAN LEMBAR KERJA PRAKTIKUM MATA PELAJARAN INSTALASI MOTOR LISTRIK KELAS XITEKNIK INSTALASI TENAGA LISTRIK DI SMK NEGERI 1 LUBUK PAKAM 中国SMK邦1中PAKAM地区的XITEKNIK电动马达安装工作表的开发
Pub Date : 2022-11-30 DOI: 10.24114/jevte.v2i2.40582
Erwin Yusuf Nasution, M. Amin
AbstractThis study aims to develop a practicum worksheet for class XI TITL electric motor installation subjects at SMKN 1 Lubuk Pakam, to test the feasibility of the practicum worksheet for electric motor installation subjects that have been made for class XI at SMKN 1 Lubuk Pakam. The methodology of this research is research and development (Research & Development) with the development model of Four-D Models. Four-D Models consists of 4 stages, namely: define, design, develop, disseminate. The Dissaminate stage was not carried out due to the narrow scope of research. The questionnaire is validated by an evaluation expert. Based on the results of the analysis and discussion, it is known that this development research produces learning resources in accordance with the syllabus, namely practicum worksheets consisting of 11 practical activities, the feasibility level of practicum worksheets is known from the results of the assessment of material experts, media experts, and the results of teacher and student responses. Abstract must reflect the overall substance of the article content and be able to help readers determine its relevance to their interests and decide whether to read the document in its entirety. The results of material expert validation covering aspects of content feasibility, language, presentation, and benefits reached an average score of 116 with a percentage of 92.8% in the "very feasible" category. The results of media expert validation covering aspects of appearance, ease of use, consistency, format, and graphics reached an average score of 99.4 with a percentage of 90.36% in the "very feasible" category. Based on the response, the teacher obtained an average score of 117.33 with a percentage of 93.86%. Meanwhile, for the response, students obtained an average score of 102.68 with a percentage of 85.56% in the "very feasible" category.Key Words: practicum worksheet, installation of electric motors. AbstrakPenelitian ini bertujuan untuk mengembangkan Lembar kerja praktikum mata pelajaran instalasi motor listrik kelas XI TITL di SMKN 1 Lubuk Pakam, untuk menguji kelayakan lembar kerja praktikum mata pelajaran instalasi motor listrik yang telah dibuat untuk kelas XI di SMKN 1 Lubuk Pakam. Metodologi penelitian ini adalah penelitian dan pengembangan (Research & Development) dengan model pengembangan Four-D Models. Four-D Models terdiri dari 4 tahap, yaitu: pendefinisian (define), perancangan (design), pengembangan (develop), penyebaran (Dissaminate). Tahap Dissaminate tidak dilaksanakan karena lingkup peneltian yang sempit. Instrumen yang digunakan adalah instrumen non tes berupa angket dengan skala Likert 5 pilihan jawaban. Angket divalidasi oleh seorang ahli evaluasi. Berdasarkan hasil analisis dan pembahasan, diketahui bahwa penelitian pengembangan ini menghasilkan sumber belajar sesuai dengan silabus yaitu lembar kerja praktikum yang terdiri dari 11 kegiatan praktik, tingkat kelayakan lembar kerja praktikum diketahui dari hasil p
本研究的方法论为研究与开发(research & development),采用四维模型的开发模式。四维模型包括四个阶段,即定义、设计、开发、传播。由于研究范围狭窄,没有进行Dissaminate阶段。问卷由评估专家验证。根据分析和讨论的结果可知,本开发研究根据教学大纲生产学习资源,即由11个实践活动组成的实习工作表,实习工作表的可行性水平从材料专家、媒体专家的评估结果和教师和学生的反应结果中得知。摘要必须反映文章内容的整体实质,能够帮助读者确定其与他们的兴趣的相关性,并决定是否阅读全文。材料专家验证的结果涵盖内容可行性、语言、演示和效益等方面,平均得分为116分,“非常可行”的比例为92.8%。媒体专家在外观、易用性、一致性、格式、图形等方面的验证结果平均为99.4分,“非常可行”的比例为90.36%。根据教师的回答,教师的平均得分为117.33分,百分比为93.86%。同时,对于回答,学生的平均得分为102.68分,“非常可行”的比例为85.56%。关键词:实习作业单,电机安装。方法论penelitian ini adalah penelitian dan pengembangan(研究与开发)dengan模型penembangan四维模型。四维模型terdiri dari 4 tahap, yitu: pendefinisian(定义),perancangan(设计),pengembangan(开发),penyebaran(传播)。Tahap disinate tidak dilaksanakan karena lingkup peneltian yang sempit。仪器yang digunakan adalah仪器non - berupa angket dengan skala Likert 5 pilihan jawaban。双有效性是一种有效的评估方法。Berdasarkan hasil分析dan pembahasan, diketahui bahwa penelitian pengembangan ini menghasilkan sumber belajar sesuai dengan silabus yitu lembar kerja praktium yang terdiri dari 11 kegiatan praktik, tingkat kelayakan lembar kerja praktium diketahui dari hasil penilanahli材料,ahli媒体,danhasil响应guru dan siswa。Hasil validasi ahli materi yang meliputi askkelayakan isi, kebahasaan, sajian, dan manfaat mencapai rata-rata skor 116 dengan呈现92.8%的patada kategori“sangat layak”。Hasil validasi ahli media yang meliputi astempilan, kemudahan penggunaan, konsistensi, format, dan kegrafikan mencapai rata-rata skor 99.4 dengan表示90.36%的patada分类词“sangat layak”。Berdasarkan响应guru memperoleh skor - rata-rata - 117.33 dengan present为93.86%。Sementara itu untuk的响应是:1 . (2.)1 . (2.)1 . (8 .)1 . (8 .)1 . (8 .)1 . (5.)Kata Kunci: lembar kerja praktikum,安装运动列表。
{"title":"PENGEMBANGAN LEMBAR KERJA PRAKTIKUM MATA PELAJARAN INSTALASI MOTOR LISTRIK KELAS XITEKNIK INSTALASI TENAGA LISTRIK DI SMK NEGERI 1 LUBUK PAKAM","authors":"Erwin Yusuf Nasution, M. Amin","doi":"10.24114/jevte.v2i2.40582","DOIUrl":"https://doi.org/10.24114/jevte.v2i2.40582","url":null,"abstract":"AbstractThis study aims to develop a practicum worksheet for class XI TITL electric motor installation subjects at SMKN 1 Lubuk Pakam, to test the feasibility of the practicum worksheet for electric motor installation subjects that have been made for class XI at SMKN 1 Lubuk Pakam. The methodology of this research is research and development (Research & Development) with the development model of Four-D Models. Four-D Models consists of 4 stages, namely: define, design, develop, disseminate. The Dissaminate stage was not carried out due to the narrow scope of research. The questionnaire is validated by an evaluation expert. Based on the results of the analysis and discussion, it is known that this development research produces learning resources in accordance with the syllabus, namely practicum worksheets consisting of 11 practical activities, the feasibility level of practicum worksheets is known from the results of the assessment of material experts, media experts, and the results of teacher and student responses. Abstract must reflect the overall substance of the article content and be able to help readers determine its relevance to their interests and decide whether to read the document in its entirety. The results of material expert validation covering aspects of content feasibility, language, presentation, and benefits reached an average score of 116 with a percentage of 92.8% in the \"very feasible\" category. The results of media expert validation covering aspects of appearance, ease of use, consistency, format, and graphics reached an average score of 99.4 with a percentage of 90.36% in the \"very feasible\" category. Based on the response, the teacher obtained an average score of 117.33 with a percentage of 93.86%. Meanwhile, for the response, students obtained an average score of 102.68 with a percentage of 85.56% in the \"very feasible\" category.Key Words: practicum worksheet, installation of electric motors. AbstrakPenelitian ini bertujuan untuk mengembangkan Lembar kerja praktikum mata pelajaran instalasi motor listrik kelas XI TITL di SMKN 1 Lubuk Pakam, untuk menguji kelayakan lembar kerja praktikum mata pelajaran instalasi motor listrik yang telah dibuat untuk kelas XI di SMKN 1 Lubuk Pakam. Metodologi penelitian ini adalah penelitian dan pengembangan (Research & Development) dengan model pengembangan Four-D Models. Four-D Models terdiri dari 4 tahap, yaitu: pendefinisian (define), perancangan (design), pengembangan (develop), penyebaran (Dissaminate). Tahap Dissaminate tidak dilaksanakan karena lingkup peneltian yang sempit. Instrumen yang digunakan adalah instrumen non tes berupa angket dengan skala Likert 5 pilihan jawaban. Angket divalidasi oleh seorang ahli evaluasi. Berdasarkan hasil analisis dan pembahasan, diketahui bahwa penelitian pengembangan ini menghasilkan sumber belajar sesuai dengan silabus yaitu lembar kerja praktikum yang terdiri dari 11 kegiatan praktik, tingkat kelayakan lembar kerja praktikum diketahui dari hasil p","PeriodicalId":239942,"journal":{"name":"JEVTE Journal of Electrical Vocational Teacher Education","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128285202","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
期刊
JEVTE Journal of Electrical Vocational Teacher Education
全部 Acc. Chem. Res. ACS Applied Bio Materials ACS Appl. Electron. Mater. ACS Appl. Energy Mater. ACS Appl. Mater. Interfaces ACS Appl. Nano Mater. ACS Appl. Polym. Mater. ACS BIOMATER-SCI ENG ACS Catal. ACS Cent. Sci. ACS Chem. Biol. ACS Chemical Health & Safety ACS Chem. Neurosci. ACS Comb. Sci. ACS Earth Space Chem. ACS Energy Lett. ACS Infect. Dis. ACS Macro Lett. ACS Mater. Lett. ACS Med. Chem. Lett. ACS Nano ACS Omega ACS Photonics ACS Sens. ACS Sustainable Chem. Eng. ACS Synth. Biol. Anal. Chem. BIOCHEMISTRY-US Bioconjugate Chem. BIOMACROMOLECULES Chem. Res. Toxicol. Chem. Rev. Chem. Mater. CRYST GROWTH DES ENERG FUEL Environ. Sci. Technol. Environ. Sci. Technol. Lett. Eur. J. Inorg. Chem. IND ENG CHEM RES Inorg. Chem. J. Agric. Food. Chem. J. Chem. Eng. Data J. Chem. Educ. J. Chem. Inf. Model. J. Chem. Theory Comput. J. Med. Chem. J. Nat. Prod. J PROTEOME RES J. Am. Chem. Soc. LANGMUIR MACROMOLECULES Mol. Pharmaceutics Nano Lett. Org. Lett. ORG PROCESS RES DEV ORGANOMETALLICS J. Org. Chem. J. Phys. Chem. J. Phys. Chem. A J. Phys. Chem. B J. Phys. Chem. C J. Phys. Chem. Lett. Analyst Anal. Methods Biomater. Sci. Catal. Sci. Technol. Chem. Commun. Chem. Soc. Rev. CHEM EDUC RES PRACT CRYSTENGCOMM Dalton Trans. Energy Environ. Sci. ENVIRON SCI-NANO ENVIRON SCI-PROC IMP ENVIRON SCI-WAT RES Faraday Discuss. Food Funct. Green Chem. Inorg. Chem. Front. Integr. Biol. J. Anal. At. Spectrom. J. Mater. Chem. A J. Mater. Chem. B J. Mater. Chem. C Lab Chip Mater. Chem. Front. Mater. Horiz. MEDCHEMCOMM Metallomics Mol. Biosyst. Mol. Syst. Des. Eng. Nanoscale Nanoscale Horiz. Nat. Prod. Rep. New J. Chem. Org. Biomol. Chem. Org. Chem. Front. PHOTOCH PHOTOBIO SCI PCCP Polym. Chem.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1