Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854817
R. Behera, Kumar Sangam, Suma S. Lonkadi, Ajay Andhiwal, Kamaljeet Singh, A. V. Nirmal
Lange Coupler implementation combining Thin and Thick Film technologies is presented in this article. The standard Lange Coupler on 0.635 mm thick alumina is realized and taken as reference module. The via concept implemented for the direct mounting on assembly board and the continuity though via is ensured using thick film conductor paste. This approach is useful in dense RF boards as it provides ease of mounting with no leads like Quad-Flat-No-lead (QFN). Additionally, unmetallized alumina nitride substrate is taken and Lange Coupler structure is realized with photolithography technique. The characterization of all the three structures are carried out. The implementation methodology utilizing thick film gold paste and wet etching provides greater flexibility on substrate selection and tight tolerances in achieving fine feature sizes without compromising circuit performance. The design implementation methodology, characterization and associated aspects are detailed in this article.
{"title":"Realization of Lange Coupler using Hybrid Technology and its Characterization","authors":"R. Behera, Kumar Sangam, Suma S. Lonkadi, Ajay Andhiwal, Kamaljeet Singh, A. V. Nirmal","doi":"10.1109/TEECCON54414.2022.9854817","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854817","url":null,"abstract":"Lange Coupler implementation combining Thin and Thick Film technologies is presented in this article. The standard Lange Coupler on 0.635 mm thick alumina is realized and taken as reference module. The via concept implemented for the direct mounting on assembly board and the continuity though via is ensured using thick film conductor paste. This approach is useful in dense RF boards as it provides ease of mounting with no leads like Quad-Flat-No-lead (QFN). Additionally, unmetallized alumina nitride substrate is taken and Lange Coupler structure is realized with photolithography technique. The characterization of all the three structures are carried out. The implementation methodology utilizing thick film gold paste and wet etching provides greater flexibility on substrate selection and tight tolerances in achieving fine feature sizes without compromising circuit performance. The design implementation methodology, characterization and associated aspects are detailed in this article.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129206222","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854816
T. Krishna, P. Chandra Babu Naidu, Kumar Cherukupalli, A. V. Reddy, M. Sravani
Electricity to all areas is supplied by energy generation companies via transmission hubs known as electricity grid. Due to some external or internal issue different problems arise when a grid fails. This leads to blackout of the entire area which was getting supply from that particular grid. This paper provides a solution to this problem using IOT as interface for communication and with the help of smart system we can avoid unnecessary loss to energy generation companies. NodeMCU controller looks over the different activities of the system. Wi-fi technology is used to communicate over the internet. The main purpose of this paper is uninterrupted power supply. If an Energy Grid fails due to a problem, the system switches the transmission line to another grid. This makes the area get an uninterrupted power supply.This paper has advanced abilities like detecting electricity theft. Theft conditions are simulated in the system. If an invalid consumer taps the electricity IOT notifies this to corresponding authorities over internet. In this way the proposed system makes sure of uninterrupted power supply and helps in detecting electricity theft.
{"title":"Smart Energy Grid Using Iot","authors":"T. Krishna, P. Chandra Babu Naidu, Kumar Cherukupalli, A. V. Reddy, M. Sravani","doi":"10.1109/TEECCON54414.2022.9854816","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854816","url":null,"abstract":"Electricity to all areas is supplied by energy generation companies via transmission hubs known as electricity grid. Due to some external or internal issue different problems arise when a grid fails. This leads to blackout of the entire area which was getting supply from that particular grid. This paper provides a solution to this problem using IOT as interface for communication and with the help of smart system we can avoid unnecessary loss to energy generation companies. NodeMCU controller looks over the different activities of the system. Wi-fi technology is used to communicate over the internet. The main purpose of this paper is uninterrupted power supply. If an Energy Grid fails due to a problem, the system switches the transmission line to another grid. This makes the area get an uninterrupted power supply.This paper has advanced abilities like detecting electricity theft. Theft conditions are simulated in the system. If an invalid consumer taps the electricity IOT notifies this to corresponding authorities over internet. In this way the proposed system makes sure of uninterrupted power supply and helps in detecting electricity theft.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"177 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133327969","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/teeccon54414.2022.9854844
Sanhita Mishra, A. Routray, S. Swain, Ritesh Dash
This paper presents details about water tree phenomena and incipient fault in the underground cable. The water Tree phenomenon is a type of fault that occurs due to old insulated cables exposed to high levels of moisture. Being a high-impedance fault, standard techniques of detection are not found much suitable and thus it becomes necessary to design a mechanism to analyze the level of destruction caused. An early warning system can be used for predictions of water-tree occurrence so that we can keep the remedial measures ready beforehand. The breakdown of cable mainly initiates due to electrical ageing phenomena, which is a slow degradation method. During ageing process, changes in various physicochemical properties may occur which will probably affect the electrical properties of cross-linked polyethylene cable insulation. This ageing will slowly convert to a permanent fault.
{"title":"A Review on Water Tree Phenomenon and Incipient Fault in Underground Cable","authors":"Sanhita Mishra, A. Routray, S. Swain, Ritesh Dash","doi":"10.1109/teeccon54414.2022.9854844","DOIUrl":"https://doi.org/10.1109/teeccon54414.2022.9854844","url":null,"abstract":"This paper presents details about water tree phenomena and incipient fault in the underground cable. The water Tree phenomenon is a type of fault that occurs due to old insulated cables exposed to high levels of moisture. Being a high-impedance fault, standard techniques of detection are not found much suitable and thus it becomes necessary to design a mechanism to analyze the level of destruction caused. An early warning system can be used for predictions of water-tree occurrence so that we can keep the remedial measures ready beforehand. The breakdown of cable mainly initiates due to electrical ageing phenomena, which is a slow degradation method. During ageing process, changes in various physicochemical properties may occur which will probably affect the electrical properties of cross-linked polyethylene cable insulation. This ageing will slowly convert to a permanent fault.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"61 11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133648177","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854834
B. Bairwa, C. Raghu, P. Ashwini Kumari, Sujo Oommen
Power quality problem is a very big problem in power system, some equipment is installed in the power system to solve it, among them dynamic voltage restaurateur is one of the best equipment. Many types of control techniques can be installed in dynamic voltage restaurateurs. Three types of control methods have been adopted in this research work. Various types of the control techniques such as PI control technique, PR control technique, and hysteresis control technology has been investigated. In this study, two major effects of power quality have been taken, which include voltage sag and voltage swell. These two power quality problems are included up to 30 percent, which is solved through all three methods. Based on the analysis of control technology, the “PI control” method is the best method for Dynamic Voltage Restorer. In this study, Designed control strategies using PI PR Hysteresis controller, with comparative analysis for the implemented for the DVR. PI PR control strategies are designed for medium-level voltage and Hysteresis control strategy design for low-level voltage.
{"title":"Comparative Analysis of Control Strategies for Dynamic Voltage Restorer","authors":"B. Bairwa, C. Raghu, P. Ashwini Kumari, Sujo Oommen","doi":"10.1109/TEECCON54414.2022.9854834","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854834","url":null,"abstract":"Power quality problem is a very big problem in power system, some equipment is installed in the power system to solve it, among them dynamic voltage restaurateur is one of the best equipment. Many types of control techniques can be installed in dynamic voltage restaurateurs. Three types of control methods have been adopted in this research work. Various types of the control techniques such as PI control technique, PR control technique, and hysteresis control technology has been investigated. In this study, two major effects of power quality have been taken, which include voltage sag and voltage swell. These two power quality problems are included up to 30 percent, which is solved through all three methods. Based on the analysis of control technology, the “PI control” method is the best method for Dynamic Voltage Restorer. In this study, Designed control strategies using PI PR Hysteresis controller, with comparative analysis for the implemented for the DVR. PI PR control strategies are designed for medium-level voltage and Hysteresis control strategy design for low-level voltage.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129485603","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854830
B. H. Kumar, P. Reddy, N. Naik, M. Tharun, K. Nagaraj, N. Babu
Environmental pollution and energy shortages are increasingly an issue due to the large number of main stream automobiles with internal combustion engines (ICEs). Electric vehicles (EV) are a great way to save resources and deliver zero-emission automobiles by limiting the energy source. As a result, it is critical to choose the right one. Many types of electric motors have been tested and assessed for electric vehicles in recent decades. Switched reluctance machines (SRMs) are now garnering scientific interest due to their numerous benefits. Because their windage and friction losses are equivalent, they run at a higher overall efficiency than an induction motor with the same rating. Due to the machine's dual salient construction and sequential excitation, torque pulsations are a natural feature of SRMs. In this work, by altering the SRM by adding a stator that looks like a switching reluctance motor's stator and a rotor that looks like a Brushless DC Motor's rotor makes a hybrid motor. This hybrid motor gives better speed range; lower current ripple and lower torque ripple there by reducing machine vibrations by comparing SRM motor. By using MATLAB software, the system has been verified.
{"title":"Control of Modified Switched Reluctance Motor for EV Applications","authors":"B. H. Kumar, P. Reddy, N. Naik, M. Tharun, K. Nagaraj, N. Babu","doi":"10.1109/TEECCON54414.2022.9854830","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854830","url":null,"abstract":"Environmental pollution and energy shortages are increasingly an issue due to the large number of main stream automobiles with internal combustion engines (ICEs). Electric vehicles (EV) are a great way to save resources and deliver zero-emission automobiles by limiting the energy source. As a result, it is critical to choose the right one. Many types of electric motors have been tested and assessed for electric vehicles in recent decades. Switched reluctance machines (SRMs) are now garnering scientific interest due to their numerous benefits. Because their windage and friction losses are equivalent, they run at a higher overall efficiency than an induction motor with the same rating. Due to the machine's dual salient construction and sequential excitation, torque pulsations are a natural feature of SRMs. In this work, by altering the SRM by adding a stator that looks like a switching reluctance motor's stator and a rotor that looks like a Brushless DC Motor's rotor makes a hybrid motor. This hybrid motor gives better speed range; lower current ripple and lower torque ripple there by reducing machine vibrations by comparing SRM motor. By using MATLAB software, the system has been verified.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115512934","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854845
D. Sony, D. Reddy, J. B. Farheen
The GNSS receiver processes the information transmitted by the satellites to decode the navigation message. The signals contain the spreaded code modulated with a high frequency carrier wave and to get the navigation data, the processing block needs to accurately tracks the phase of the incoming signal. Usually a delay lock loop with early-late spacing of 1-chip is used at code tracking stage but to have more precise tracking a narrow correlator is used which tracks with 0.1 chip accuracy. In this paper first basic working of code tracking loop is discussed, then the significance of narrow correlator is briefed. This paper focuses on the simulation results of both standard normal correlator and the designed narrow correlator. The design and simulation of code tracking loop is carried out in Xilinx ISE platform.
{"title":"Implementation of Code Tracking Loop using Narrow Correlator for GNSS","authors":"D. Sony, D. Reddy, J. B. Farheen","doi":"10.1109/TEECCON54414.2022.9854845","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854845","url":null,"abstract":"The GNSS receiver processes the information transmitted by the satellites to decode the navigation message. The signals contain the spreaded code modulated with a high frequency carrier wave and to get the navigation data, the processing block needs to accurately tracks the phase of the incoming signal. Usually a delay lock loop with early-late spacing of 1-chip is used at code tracking stage but to have more precise tracking a narrow correlator is used which tracks with 0.1 chip accuracy. In this paper first basic working of code tracking loop is discussed, then the significance of narrow correlator is briefed. This paper focuses on the simulation results of both standard normal correlator and the designed narrow correlator. The design and simulation of code tracking loop is carried out in Xilinx ISE platform.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129245955","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854832
N. Disayiram, R. Rupasingha
Mainly news helps people to identify, what happened around them. News is imperative as a social gathering space as well, subsequently, daily papers either online or physical put an accentuation on news. Most people use news websites nowadays. Every newsreader has a preferable news category and not all readers are read all the categories of news. It is different from person to person. Therefore, the category of news is very important. It is very hard to get all the news from one news website. Sometimes it may not have the category who is searching for. To overcome these issues classification techniques are used to classify the news articles. This English news classification method aims to extract news articles from a variety of online news sites and classify them based on their domain categories such as business, health, politics, technology, and sports. The datasets are converted into machine trainable format by using Term Frequency-Inverse Document Frequency (TF-IDF) techniques. The different classification algorithms are applied to the training and testing dataset to create a model and then classify the news articles based on their relevant categories. The five individual classifications algorithms such as Decision Tree, Random Forest, Naïve Bayes, Multilayer Perceptron (MLP) and Support Vector Machine (SVM) are applied. Among them, SVM shows better results. When combining these five algorithms using the Ensemble Learning method, it shows a better accuracy result 92.75% with the lowest error rate than individual algorithms to predict the news articles based on their category.
{"title":"A Comparative Study of Classifying English News Articles Using Machine Learning Algorithms","authors":"N. Disayiram, R. Rupasingha","doi":"10.1109/TEECCON54414.2022.9854832","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854832","url":null,"abstract":"Mainly news helps people to identify, what happened around them. News is imperative as a social gathering space as well, subsequently, daily papers either online or physical put an accentuation on news. Most people use news websites nowadays. Every newsreader has a preferable news category and not all readers are read all the categories of news. It is different from person to person. Therefore, the category of news is very important. It is very hard to get all the news from one news website. Sometimes it may not have the category who is searching for. To overcome these issues classification techniques are used to classify the news articles. This English news classification method aims to extract news articles from a variety of online news sites and classify them based on their domain categories such as business, health, politics, technology, and sports. The datasets are converted into machine trainable format by using Term Frequency-Inverse Document Frequency (TF-IDF) techniques. The different classification algorithms are applied to the training and testing dataset to create a model and then classify the news articles based on their relevant categories. The five individual classifications algorithms such as Decision Tree, Random Forest, Naïve Bayes, Multilayer Perceptron (MLP) and Support Vector Machine (SVM) are applied. Among them, SVM shows better results. When combining these five algorithms using the Ensemble Learning method, it shows a better accuracy result 92.75% with the lowest error rate than individual algorithms to predict the news articles based on their category.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"304 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123457013","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854841
Ramu Srikakulapu, G. Sanjay Kumar, P. Joanna Parimala, G. Charan kumar
The regulation of interfaced converters with the integration of renewable energy sources (RESs) into the power grid with penetration effect is the subject of this article. Various amounts of RES penetration into the grid are used to present a suitable outcome of this investigation. The simulation findings for grid integration with varying levels of PV penetration are presented. A maximum PV penetration of 50% of peak demand is modelled, with a minimum of 10%. This project examines a variety of faults, including symmetrical and unsymmetrical faults. Two controllers are employed in the control process, one for boost converter with maximum power point tracking and the other for VSC controller. The VSC controller regulates the DC voltage. Inner and outer loops exist in the VSC controller. The current is controlled by the inner loop, while the DC voltage is controlled by the outside loop. With these future scenarios in mind, this paper presents existing solutions as well as new and future options to solve these concerns.
{"title":"Control of Interfaced Converters with Various Levels of PV Penetration into the Grid: A Case Study","authors":"Ramu Srikakulapu, G. Sanjay Kumar, P. Joanna Parimala, G. Charan kumar","doi":"10.1109/TEECCON54414.2022.9854841","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854841","url":null,"abstract":"The regulation of interfaced converters with the integration of renewable energy sources (RESs) into the power grid with penetration effect is the subject of this article. Various amounts of RES penetration into the grid are used to present a suitable outcome of this investigation. The simulation findings for grid integration with varying levels of PV penetration are presented. A maximum PV penetration of 50% of peak demand is modelled, with a minimum of 10%. This project examines a variety of faults, including symmetrical and unsymmetrical faults. Two controllers are employed in the control process, one for boost converter with maximum power point tracking and the other for VSC controller. The VSC controller regulates the DC voltage. Inner and outer loops exist in the VSC controller. The current is controlled by the inner loop, while the DC voltage is controlled by the outside loop. With these future scenarios in mind, this paper presents existing solutions as well as new and future options to solve these concerns.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131767816","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854836
Sanjeeta Dhegaya, Lavi Tanwar
With the increase of complexity in the filter design for the structure related to the airborne platform it is best to opt for the simple solution. Thus, in this paper performance of the antenna with the stable gain for the airborne platform is analyzed when frequency selective surfaces (FSS) are inserted as a band-pass filter, both for planar and conformal structure. The analysis is performed keeping in mind the radome application. Unit cell analysis is performed using floquet boundary in CST software. Surface current distribution and s-parameters of the frequency selective surface (FSS) is observed. Designed unit cell FSS presents good angular stability and is polarization independent. Additionally, the frequency selective surface element is replicated on the planar and conformal structure as 3×3 FSS element array to observe the gain of the antenna with FSS as a performance parameter by simulating through a horn antenna. For observing the effectiveness of the filter throughout the frequency band of interest, the Insertion loss and gain of the antenna with FSS are analyzed. Comparative performance analysis at a normal incidence angle of an antenna with and without FSS structure in terms of a gain parameter is presented.
{"title":"Stable Gain With Frequency Selective Surface in Planar and Conformal Structure: For Radome Application","authors":"Sanjeeta Dhegaya, Lavi Tanwar","doi":"10.1109/TEECCON54414.2022.9854836","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854836","url":null,"abstract":"With the increase of complexity in the filter design for the structure related to the airborne platform it is best to opt for the simple solution. Thus, in this paper performance of the antenna with the stable gain for the airborne platform is analyzed when frequency selective surfaces (FSS) are inserted as a band-pass filter, both for planar and conformal structure. The analysis is performed keeping in mind the radome application. Unit cell analysis is performed using floquet boundary in CST software. Surface current distribution and s-parameters of the frequency selective surface (FSS) is observed. Designed unit cell FSS presents good angular stability and is polarization independent. Additionally, the frequency selective surface element is replicated on the planar and conformal structure as 3×3 FSS element array to observe the gain of the antenna with FSS as a performance parameter by simulating through a horn antenna. For observing the effectiveness of the filter throughout the frequency band of interest, the Insertion loss and gain of the antenna with FSS are analyzed. Comparative performance analysis at a normal incidence angle of an antenna with and without FSS structure in terms of a gain parameter is presented.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"121 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114458532","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-05-26DOI: 10.1109/TEECCON54414.2022.9854843
Prasanth Venkatareddy, K. Sambaiah, Samanvita N
Attaining optimal long-term benefits with suitable distributed generation (DG) allocation in power distribution networks remains a major challenge. Because improper DG allocation has a negative impact on the power distribution network. The current research presents a unique metaheuristic optimization approach for resolving allocation of renewable source allocation in power distribution network. The present algorithm effectively developed on a real-world Indian 28-bus network to deploy wind and solar generation for pursuing technical benefits such as minimization of power loss and voltage deviation. The current method's simulation results are compared to those reported in the literature and determined to be superior.
{"title":"Optimal Mix and allocation of Solar and Wind Energy Sources in Active Distribution System Using Jaya Optimization Algorithm","authors":"Prasanth Venkatareddy, K. Sambaiah, Samanvita N","doi":"10.1109/TEECCON54414.2022.9854843","DOIUrl":"https://doi.org/10.1109/TEECCON54414.2022.9854843","url":null,"abstract":"Attaining optimal long-term benefits with suitable distributed generation (DG) allocation in power distribution networks remains a major challenge. Because improper DG allocation has a negative impact on the power distribution network. The current research presents a unique metaheuristic optimization approach for resolving allocation of renewable source allocation in power distribution network. The present algorithm effectively developed on a real-world Indian 28-bus network to deploy wind and solar generation for pursuing technical benefits such as minimization of power loss and voltage deviation. The current method's simulation results are compared to those reported in the literature and determined to be superior.","PeriodicalId":251455,"journal":{"name":"2022 Trends in Electrical, Electronics, Computer Engineering Conference (TEECCON)","volume":"72 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123195109","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：