Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253153
M. A. K. Lubis, D. P. Yusuf, F. Zulkifli, E. Rahardjo
Radar is an important device for monitoring border security of Indonesia territory. The radar consists of several components, one of which is an antenna that works in the X-band. Usually, slot antennas are often used in navigation radar from an array fed by a waveguide. There are two types of slot placement positions on the slotted waveguide antenna i.e broad wall and narrow wall slotted waveguide antenna. This paper discusses a design and simulation of the addition the number of slots on narrow wall waveguide antenna at X-band 9.4 GHz. The simulation results showed that the increment of slots number will narrow the bandwidth. However, compared to the broad wall slotted waveguide antenna, a narrow wall slotted waveguide antenna yield a wider bandwidth in the same number of slots and slot width.
{"title":"Bandwidth improvement with narrow wall slotted waveguide antenna","authors":"M. A. K. Lubis, D. P. Yusuf, F. Zulkifli, E. Rahardjo","doi":"10.1109/ICRAMET.2017.8253153","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253153","url":null,"abstract":"Radar is an important device for monitoring border security of Indonesia territory. The radar consists of several components, one of which is an antenna that works in the X-band. Usually, slot antennas are often used in navigation radar from an array fed by a waveguide. There are two types of slot placement positions on the slotted waveguide antenna i.e broad wall and narrow wall slotted waveguide antenna. This paper discusses a design and simulation of the addition the number of slots on narrow wall waveguide antenna at X-band 9.4 GHz. The simulation results showed that the increment of slots number will narrow the bandwidth. However, compared to the broad wall slotted waveguide antenna, a narrow wall slotted waveguide antenna yield a wider bandwidth in the same number of slots and slot width.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"121 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123568588","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253140
Rheza Egha Dwi Rendra Graha, A. A. Muayyadi, Denny Darlis
The method of multicarrier being developed at this time, namely Orthogonal Frequency Division Multiplexing (OFDM). But in its development, OFDM has several shortcomings. such as the high value of Peak to Average Power Ratio (PAPR) which causes the lower efficiency of power amplifier. An alternative method of multicarrier modulation is Orthogonal Wavelet Division Multiplexing (OWDM). OFDM uses the Inverse Fast Fourier Transform (IFFT) while OWDM uses the Inverse Discrete Wavelet Transform (IDWT). Our previous study showed that the bit error rate of OWDM is relatively equivalent to that of OFDM, while the PAPR value of OWDM is smaller than that of OFDM. This research implemented OWDM using VHDL language to encode each blocks of OWDM on a Field Programmable Gate Array (FPGA). FPGA has many advantages, one of them is the ability to handle the heavy computational load. The results of modeling and simulation were then implemented on the Field Programmable Gate Array (FPGA) board ATLYS Spartan-6 XC6SLX45 CSG324C. The results of this implementation indicated that the design of OWDM prototype algorithm using the Discrete Wavelet Transform (DWT) technique could be implemented on Spartan-6 board ATLYS XC6SLX45 CSG324C. The implementation results showed the resource usage of 13% on the FPGA board, with a minimum period of 75.668 ns and under the working frequency of Spartan-6 FPGA of 13.216 MHz.
{"title":"FPGA-based implementation of orthogonal wavelet division multiplexing","authors":"Rheza Egha Dwi Rendra Graha, A. A. Muayyadi, Denny Darlis","doi":"10.1109/ICRAMET.2017.8253140","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253140","url":null,"abstract":"The method of multicarrier being developed at this time, namely Orthogonal Frequency Division Multiplexing (OFDM). But in its development, OFDM has several shortcomings. such as the high value of Peak to Average Power Ratio (PAPR) which causes the lower efficiency of power amplifier. An alternative method of multicarrier modulation is Orthogonal Wavelet Division Multiplexing (OWDM). OFDM uses the Inverse Fast Fourier Transform (IFFT) while OWDM uses the Inverse Discrete Wavelet Transform (IDWT). Our previous study showed that the bit error rate of OWDM is relatively equivalent to that of OFDM, while the PAPR value of OWDM is smaller than that of OFDM. This research implemented OWDM using VHDL language to encode each blocks of OWDM on a Field Programmable Gate Array (FPGA). FPGA has many advantages, one of them is the ability to handle the heavy computational load. The results of modeling and simulation were then implemented on the Field Programmable Gate Array (FPGA) board ATLYS Spartan-6 XC6SLX45 CSG324C. The results of this implementation indicated that the design of OWDM prototype algorithm using the Discrete Wavelet Transform (DWT) technique could be implemented on Spartan-6 board ATLYS XC6SLX45 CSG324C. The implementation results showed the resource usage of 13% on the FPGA board, with a minimum period of 75.668 ns and under the working frequency of Spartan-6 FPGA of 13.216 MHz.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"65 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114562126","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253138
N. Abdullah, N. E. Rashid, I. P. Ibrahim, R. Abdullah
This paper evaluates the performance of Forward Scatter Radar classification system using as so called “hybrid FSR classification techniques” based on three different data extraction methods which are manual, Principal Component Analysis (PCA) and z-score. By combining these data extraction methods with neural network, this FSR hybrid classification system should be able to classify vehicles into their category: small, medium and large vehicles. Vehicle signals for four different types of cars were collected for three different frequencies: 64 MHz, 151 MHz and 434 MHz. Data from the vehicle signal is extracted using above mentioned method and feed as the input to Neural Network. The performance of each method is evaluated by calculating the classification accuracy. The results suggest that the combination of z-score and neural network give the best classification performance compares to manual and PCA methods.
{"title":"FSR vehicles classification system based on hybrid neural network with different data extraction methods","authors":"N. Abdullah, N. E. Rashid, I. P. Ibrahim, R. Abdullah","doi":"10.1109/ICRAMET.2017.8253138","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253138","url":null,"abstract":"This paper evaluates the performance of Forward Scatter Radar classification system using as so called “hybrid FSR classification techniques” based on three different data extraction methods which are manual, Principal Component Analysis (PCA) and z-score. By combining these data extraction methods with neural network, this FSR hybrid classification system should be able to classify vehicles into their category: small, medium and large vehicles. Vehicle signals for four different types of cars were collected for three different frequencies: 64 MHz, 151 MHz and 434 MHz. Data from the vehicle signal is extracted using above mentioned method and feed as the input to Neural Network. The performance of each method is evaluated by calculating the classification accuracy. The results suggest that the combination of z-score and neural network give the best classification performance compares to manual and PCA methods.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"102 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115652879","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253150
Irawan Sukma, I. Supono
Inductive resonance coupling is one of wireless power transfer technique. This paper presents a wireless power transfer design using inductive coupling which comply to the requirement of the wireless power consortium (WPC) standards in the resonant frequency range of 110 ∼ 205 kHz. The circuit design and simulation have been conducted using a powerful and free LTspice simulation software with fast fourier transform (FFT) and directive analysis. Transmitter circuit based on royer oscillator circuit and receiver circuit has full wave rectifier, CLC Alter and load of 100 ohm. The result from experiments are the resonant frequency of circuit design of 145 kHz based on the calculation and 142.66 kHz based on the simulation. The difference between the two resonant frequency is caused by the components used in circuit, such as resistance of inductor (RL) transmitter and receiver 0.1 ohm giving resonant frequency 142.66 kHz which close to 145 kHz. Furthermore, the design circuit cannot reach maximum power efficiency when k close to 1, but the designed circuit can result maximum efficiency of 8.14 % when coupling coefficient (k) is 0.90 and the Rl 0.1 ohm.
{"title":"Design and simulation of 145 kHz wireless power transfer for low power application","authors":"Irawan Sukma, I. Supono","doi":"10.1109/ICRAMET.2017.8253150","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253150","url":null,"abstract":"Inductive resonance coupling is one of wireless power transfer technique. This paper presents a wireless power transfer design using inductive coupling which comply to the requirement of the wireless power consortium (WPC) standards in the resonant frequency range of 110 ∼ 205 kHz. The circuit design and simulation have been conducted using a powerful and free LTspice simulation software with fast fourier transform (FFT) and directive analysis. Transmitter circuit based on royer oscillator circuit and receiver circuit has full wave rectifier, CLC Alter and load of 100 ohm. The result from experiments are the resonant frequency of circuit design of 145 kHz based on the calculation and 142.66 kHz based on the simulation. The difference between the two resonant frequency is caused by the components used in circuit, such as resistance of inductor (RL) transmitter and receiver 0.1 ohm giving resonant frequency 142.66 kHz which close to 145 kHz. Furthermore, the design circuit cannot reach maximum power efficiency when k close to 1, but the designed circuit can result maximum efficiency of 8.14 % when coupling coefficient (k) is 0.90 and the Rl 0.1 ohm.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"94 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128686324","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253171
K. Paramayudha, Arief Budi Santiko, Y. Wahyu, Reza Pratama, A. A. Muayyadi
In this paper Radio Frequency Identification (RFID) antenna that operates in millimeter wave at 35 GHz has been proposed. At millimeter wave, higher data rate up to gigabit is proven to be possible because the signal at this band could create pencil beam with higher gain. Voltage Standing Wave Ratio (VSWR) of fabricated antenna at 35 GHz was 1.083, with bandwidth of 200 MHz for VSWR <1.2. Radiation pattern of the antenna was nearly omnidirectional with gain of 3.22 dBi. Overall, measurement results on antennas that have been realized is not many different and in accordance with the required specifications.
{"title":"Millimeter wave antenna for RFID application","authors":"K. Paramayudha, Arief Budi Santiko, Y. Wahyu, Reza Pratama, A. A. Muayyadi","doi":"10.1109/ICRAMET.2017.8253171","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253171","url":null,"abstract":"In this paper Radio Frequency Identification (RFID) antenna that operates in millimeter wave at 35 GHz has been proposed. At millimeter wave, higher data rate up to gigabit is proven to be possible because the signal at this band could create pencil beam with higher gain. Voltage Standing Wave Ratio (VSWR) of fabricated antenna at 35 GHz was 1.083, with bandwidth of 200 MHz for VSWR <1.2. Radiation pattern of the antenna was nearly omnidirectional with gain of 3.22 dBi. Overall, measurement results on antennas that have been realized is not many different and in accordance with the required specifications.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"124 5","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120912277","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253136
H. Abdullah, Azwati Azmin, Y. Yusoff, A. M. Mozi, N. R. Ahmad, A. R. Razali, M. Taib
Technology of microwave absorber has been widely used by over sectors and industries to minimize the effects the radiated signals on the performance of the electronics circuit. Biomass waste material has potential to be used as an alternative way to develop the microwave absorber that used in RF anechoic chamber. This paper investigates the absorption rate performance of durian rind as raw material to develop as a microwave absorbing material for frequency range between 8 GHz to 12 GHz at normal incidents reflection. The absorption rate performances of the developed absorber are compared with the existing commercial absorber in term of absorption characteristics. All the design specifications duplicate the commercial absorber as reference. The measurement results revealed that the best absorption performance of the pure durian rind was 39dB at 10.8GHz and the average absorption obtained 29.5dB which is classified as good performance in absorption.
{"title":"Preliminary study on absorption rate of truncated wedge biomass microwave durian absorber","authors":"H. Abdullah, Azwati Azmin, Y. Yusoff, A. M. Mozi, N. R. Ahmad, A. R. Razali, M. Taib","doi":"10.1109/ICRAMET.2017.8253136","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253136","url":null,"abstract":"Technology of microwave absorber has been widely used by over sectors and industries to minimize the effects the radiated signals on the performance of the electronics circuit. Biomass waste material has potential to be used as an alternative way to develop the microwave absorber that used in RF anechoic chamber. This paper investigates the absorption rate performance of durian rind as raw material to develop as a microwave absorbing material for frequency range between 8 GHz to 12 GHz at normal incidents reflection. The absorption rate performances of the developed absorber are compared with the existing commercial absorber in term of absorption characteristics. All the design specifications duplicate the commercial absorber as reference. The measurement results revealed that the best absorption performance of the pure durian rind was 39dB at 10.8GHz and the average absorption obtained 29.5dB which is classified as good performance in absorption.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126178724","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253156
A. P. Aji, C. Apriono, F. Zulkifli, E. Rahardjo
Measurement of an antenna at Terahertz (THz) frequency is a key challenge in the field of micro and nano-wave research. The very small wavelength increase complexity during the fabrication and measurement processes. Therefore, it is necessary to develop a measurement technique to get reasonable results, such as radiation pattern, with an affordable measurement setting. In this paper, we study a scaling up process of a 1 THz planar bow-tie antenna intended to be measured at a desired resonant, which is determined at 1 GHz. The antenna is fabricated on a FR-4 material substrate and measured by conducting the common microwave antenna measurement. The radiation pattern of the scaled up antenna shows comparable result with the THz design antenna. Thus, this technique can be used as a solution to confirm radiation pattern of a THz antenna through the scaling up procedure and the microwave measurement.
{"title":"Radiation pattern validation of a THz planar bow-tie antenna at microwave domain by scaling up technique","authors":"A. P. Aji, C. Apriono, F. Zulkifli, E. Rahardjo","doi":"10.1109/ICRAMET.2017.8253156","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253156","url":null,"abstract":"Measurement of an antenna at Terahertz (THz) frequency is a key challenge in the field of micro and nano-wave research. The very small wavelength increase complexity during the fabrication and measurement processes. Therefore, it is necessary to develop a measurement technique to get reasonable results, such as radiation pattern, with an affordable measurement setting. In this paper, we study a scaling up process of a 1 THz planar bow-tie antenna intended to be measured at a desired resonant, which is determined at 1 GHz. The antenna is fabricated on a FR-4 material substrate and measured by conducting the common microwave antenna measurement. The radiation pattern of the scaled up antenna shows comparable result with the THz design antenna. Thus, this technique can be used as a solution to confirm radiation pattern of a THz antenna through the scaling up procedure and the microwave measurement.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"57 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125943282","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253170
Sulistyaningsih, P. Putranto, M. Wahab, Topik Teguh Estu
Antenna is one of the most necessary parts in radar coastal application. Microstrip antena usually be chosen for that purpose because it is small, light, cheap, and easy to fabricate. But a conventional microstrip antenna is still inadequate to obtain higher gain and to minimize the beamwidth. So, in this research, for a 3 GHz S-Band coastal radar application, 4 modules of 2 × 6 patch array with inset fed and perturbation on each have been simulated to achieve the antenna specifications. A unidirectional radiation pattern has been chosen. By this improvement, the result gives antenna with gain = 17,6 dBi and return loss <-10 dB.
{"title":"Microstrip patch array antenna with inset fed and perturbation for a 3 GHz S-band coastal radar","authors":"Sulistyaningsih, P. Putranto, M. Wahab, Topik Teguh Estu","doi":"10.1109/ICRAMET.2017.8253170","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253170","url":null,"abstract":"Antenna is one of the most necessary parts in radar coastal application. Microstrip antena usually be chosen for that purpose because it is small, light, cheap, and easy to fabricate. But a conventional microstrip antenna is still inadequate to obtain higher gain and to minimize the beamwidth. So, in this research, for a 3 GHz S-Band coastal radar application, 4 modules of 2 × 6 patch array with inset fed and perturbation on each have been simulated to achieve the antenna specifications. A unidirectional radiation pattern has been chosen. By this improvement, the result gives antenna with gain = 17,6 dBi and return loss <-10 dB.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116011029","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253169
F. Oktafiani, Y. P. Saputera, Y. Wahyu
The design of microstrip patch array with horizontal polarization for ISRA radar is presented in this paper. The first step of this research is designing a single antenna element. To increase the gain and to narrow the beamwidth, each single antenna is then arranged as the 5×1 and the 5×4. To obtain horizontal polarization, a rectangular slot is located on the right side of the bottom patch. Antenna array consists of a 20 squareshaped patch with uniform distribution to the vertical and horizontal directions. The results showed an antenna array has a resonant frequency of 9.3 GHz with reflection coefficient value of −31.93 dB. The resulting gain of the antenna array is 17.9 dB whereas the vertical and horizontal beamwidth antenna array is 16,8° and 21,4°. An antenna feeding uses a proximity technique which utilizes two substrates, the transmission line on the bottom substrate and the patch antenna on top of the substrate. This technique can increase the bandwidth of the antenna by 59.36%.
{"title":"Microstrip patch array antenna with horizontal polarization for ISRA RADAR","authors":"F. Oktafiani, Y. P. Saputera, Y. Wahyu","doi":"10.1109/ICRAMET.2017.8253169","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253169","url":null,"abstract":"The design of microstrip patch array with horizontal polarization for ISRA radar is presented in this paper. The first step of this research is designing a single antenna element. To increase the gain and to narrow the beamwidth, each single antenna is then arranged as the 5×1 and the 5×4. To obtain horizontal polarization, a rectangular slot is located on the right side of the bottom patch. Antenna array consists of a 20 squareshaped patch with uniform distribution to the vertical and horizontal directions. The results showed an antenna array has a resonant frequency of 9.3 GHz with reflection coefficient value of −31.93 dB. The resulting gain of the antenna array is 17.9 dB whereas the vertical and horizontal beamwidth antenna array is 16,8° and 21,4°. An antenna feeding uses a proximity technique which utilizes two substrates, the transmission line on the bottom substrate and the patch antenna on top of the substrate. This technique can increase the bandwidth of the antenna by 59.36%.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125960572","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2017-10-01DOI: 10.1109/ICRAMET.2017.8253135
Hana Arisesa, E. J. Pristianto, A. N. Rahman, K. Permana, W. Desvasari, P. Daud, Purwoko Adhi
Development of transmitter subsystem based on FMCW radar using for navigational application has been presented. It consists of several key components such us frequency generation, splitter, bandpass filter, power amplifier, and the transmitter antenna. It operates in X band frequency with low power consumption. The proposed subsystem was modeled in SystemVue simulation electronic design automation software from Keysight for matching the design, validation and tests its performance. Experimental testing has been done in the laboratory. Transmitter output power reaches 28 dBm (630 mW). According to its performance, this subsystem is successfully meet the requirement.
{"title":"Compact FMCW radar system for navigation application: Transmitter front-end design","authors":"Hana Arisesa, E. J. Pristianto, A. N. Rahman, K. Permana, W. Desvasari, P. Daud, Purwoko Adhi","doi":"10.1109/ICRAMET.2017.8253135","DOIUrl":"https://doi.org/10.1109/ICRAMET.2017.8253135","url":null,"abstract":"Development of transmitter subsystem based on FMCW radar using for navigational application has been presented. It consists of several key components such us frequency generation, splitter, bandpass filter, power amplifier, and the transmitter antenna. It operates in X band frequency with low power consumption. The proposed subsystem was modeled in SystemVue simulation electronic design automation software from Keysight for matching the design, validation and tests its performance. Experimental testing has been done in the laboratory. Transmitter output power reaches 28 dBm (630 mW). According to its performance, this subsystem is successfully meet the requirement.","PeriodicalId":257673,"journal":{"name":"2017 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET)","volume":"85 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130803061","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：