Pub Date : 2024-01-02DOI: 10.19184/bst.v11i4.42681
Hilda Ayu Melvi Amalia, Armadi Chairunnas
The degradation of environmental quality has become a global problem today. One way to address this is by providing green open spaces that help maintain environmental quality. Kendari city has a number of green open spaces (RTH) including, RTH in Baruga sub-district, Kendari mayor's office area and in Nanga-nanga botanical garden of Kendari city. This study aims to determine the density and ecological role of ants (Odontomachus sp.) in green open spaces in Kendari city. The method used in this study was hand sorting using ring samples with a diameter of 20 cm and a height of 15 cm in a plot measuring 25 m x 25 m consisting of 25 sampling points with a distance of 5 m per point. Data analysis was carried out by calculating the density at each research location, namely Baruga green space, mayor's park and Nanga-nanga botanical garden. The results showed that the highest density of ants (Odontomachus sp.) was found in the mayor's park with 16 ind/m2. The ecological role of ants (Odontomachus sp.) in Kendari city green open space is an important role in bioturbation and natural predators of soil fauna such as termites and earthworms.
{"title":"Ants Density of Odontomachus sp. and Its Ecological Role in Kendari City Green Open Space","authors":"Hilda Ayu Melvi Amalia, Armadi Chairunnas","doi":"10.19184/bst.v11i4.42681","DOIUrl":"https://doi.org/10.19184/bst.v11i4.42681","url":null,"abstract":"The degradation of environmental quality has become a global problem today. One way to address this is by providing green open spaces that help maintain environmental quality. Kendari city has a number of green open spaces (RTH) including, RTH in Baruga sub-district, Kendari mayor's office area and in Nanga-nanga botanical garden of Kendari city. This study aims to determine the density and ecological role of ants (Odontomachus sp.) in green open spaces in Kendari city. The method used in this study was hand sorting using ring samples with a diameter of 20 cm and a height of 15 cm in a plot measuring 25 m x 25 m consisting of 25 sampling points with a distance of 5 m per point. Data analysis was carried out by calculating the density at each research location, namely Baruga green space, mayor's park and Nanga-nanga botanical garden. The results showed that the highest density of ants (Odontomachus sp.) was found in the mayor's park with 16 ind/m2. The ecological role of ants (Odontomachus sp.) in Kendari city green open space is an important role in bioturbation and natural predators of soil fauna such as termites and earthworms.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"14 12","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-01-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139452788","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-30DOI: 10.19184/bst.v11i3.39422
Sintesis Zeolit, Y. Dari, Lumpur Lapindo, Dengan Variasi, Keterisian Autoklaf, dan Variasi, Rasio Molar, SiAl, Novita Andarini, Deys Sya’fatul Maziyyah, T. Haryati, Yudi Aris Sulistiyo
Lapindo mud contains Silicate (SiO2), and Aluminum oxide (Al2O3) that can be utilized to synthesize zeolite Y. Zeolite Y was synthesized from Lapindo mud via the smelting and hydrothermal method, respectively. The thermal activation of Lapindo mud was achieved by leaching smelting at 550oC for 2 hours with NaOH to achieve thed desire adding SiO2, NaOH and aging for 48 hours. The effects of various parameters on the synthesis were investigated. The samples were characterized with X-ray Fluorescence (XRF), X-Ray Diffraction (XRD), Fourier Transformation Infrared Spectroscopy (FTIR) and Gas Sorption Analyzer (GSA). Zeolite Y with high crystallinity was synthesized under optimized conditions, such as filling autoclave 90% and a SiO2/ Al2O3 molar ratio of 15.
{"title":"Synthesis Zeolite Y From Lapindo Mud With Variations Filling Autoclave And Ratio Molar Si/Al","authors":"Sintesis Zeolit, Y. Dari, Lumpur Lapindo, Dengan Variasi, Keterisian Autoklaf, dan Variasi, Rasio Molar, SiAl, Novita Andarini, Deys Sya’fatul Maziyyah, T. Haryati, Yudi Aris Sulistiyo","doi":"10.19184/bst.v11i3.39422","DOIUrl":"https://doi.org/10.19184/bst.v11i3.39422","url":null,"abstract":"Lapindo mud contains Silicate (SiO2), and Aluminum oxide (Al2O3) that can be utilized to synthesize zeolite Y. Zeolite Y was synthesized from Lapindo mud via the smelting and hydrothermal method, respectively. The thermal activation of Lapindo mud was achieved by leaching smelting at 550oC for 2 hours with NaOH to achieve thed desire adding SiO2, NaOH and aging for 48 hours. The effects of various parameters on the synthesis were investigated. The samples were characterized with X-ray Fluorescence (XRF), X-Ray Diffraction (XRD), Fourier Transformation Infrared Spectroscopy (FTIR) and Gas Sorption Analyzer (GSA). Zeolite Y with high crystallinity was synthesized under optimized conditions, such as filling autoclave 90% and a SiO2/ Al2O3 molar ratio of 15.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"93 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139331567","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-30DOI: 10.19184/bst.v11i3.31737
Andini Cahya Aulia, M. Fatekurohman, Made Tirta
Learning is a process of interaction between educators and students who meet the elements of learning carried out in an educational environment, so that learning can develop student’s abilities, interests and talents optimally. In today's era learning is done online and inversely with offline. The purpose of this study is to analyze the comparison of percentages and classification results as well as the results of learning evaluations using the Naïve Bayes method and C4.5. This test is carried out with 4 variables and a comparison of the two methods. The results showed that the accuracy of Naïve Bayes was 74.07% and C4.5. of 77.77% so that the comparison results show that the level of accuracy of the C4.5 method is better than Naïve Bayes. The resulting importance variables are time and effectiveness as well as the results of the classification of learning decisions, namely the offline category as many as 16 data on the Naïve Bayes method and 19 data on the Decision Tree algorithm C4.5 method from 27 input testing data.
{"title":"Comparison of Online and Offline Learning During The COVID-19 Pandemic using Naïve Bayes Method and C4.5","authors":"Andini Cahya Aulia, M. Fatekurohman, Made Tirta","doi":"10.19184/bst.v11i3.31737","DOIUrl":"https://doi.org/10.19184/bst.v11i3.31737","url":null,"abstract":"Learning is a process of interaction between educators and students who meet the elements of learning carried out in an educational environment, so that learning can develop student’s abilities, interests and talents optimally. In today's era learning is done online and inversely with offline. The purpose of this study is to analyze the comparison of percentages and classification results as well as the results of learning evaluations using the Naïve Bayes method and C4.5. This test is carried out with 4 variables and a comparison of the two methods. The results showed that the accuracy of Naïve Bayes was 74.07% and C4.5. of 77.77% so that the comparison results show that the level of accuracy of the C4.5 method is better than Naïve Bayes. The resulting importance variables are time and effectiveness as well as the results of the classification of learning decisions, namely the offline category as many as 16 data on the Naïve Bayes method and 19 data on the Decision Tree algorithm C4.5 method from 27 input testing data.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"8 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139333403","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-30DOI: 10.19184/bst.v11i3.38055
A. B. Aritonang, Nuri Rozaqina, H. Harlia
A thin layer of TiO2 doped with Cobalt (II) immobilized on the surface of a titanium foil (Co(II)-TiO2/Ti) has been synthesized from a titanium foil (Ti) as a TiO2 precursor as well as a thin layer matrix and CoCl2.6H2O as a source of Co(II) on variations of 0.5%, 1% and 2%. Synthesis was carried out by anodizing method using ethylene glycol electrolyte solution with the addition of NH4F and followed by calcination treatment at 450ºC for 3 hours. The obtained Co(II)-TiO2 /Ti thin films were characterized using Fourier-transform infrared (FT-IR) spectroscopy, Diffuse Reflectance UV-Vis (DRSUV-Vis) and X-ray diffraction (XRD) methods. Doping Co(II) variations of 0.5%, 1.0% dan 2.0% in the TiO2 structure causes a shift in the vibrational absorption peak of Ti-O (460.99 cm-1) towards a smaller wave number of 459.06 cm-1 respectively ; 453.27 cm-1 and 451.34 cm-1. This is supported by the results of the DRUV-Vis analysis using the tauc plot method, which shows a decrease in the band gap energy of TiO2 (3.24 eV) to 2.57 eV, 2.47 eV and 2.28 eV. Based on XRD analysis, it is known that the Co(II)-TiO2/Ti photocatalyst has anatase phase with a crystal size of 15-17 nm. The photocatalytic activity of Co(II)-TiO2/Ti under visible light illumination was evaluated for inhibition of Escherichia coli bacterial growth. Co(II)-TiO2/Ti photocatalyst at 2.0% Co(II) concentration had the best inhibition (43.2%) compared to 0.5% and 1.0% Co(II) concentrations, respectively 18% inhibition and 27%.
{"title":"Co(II)-TiO2/Ti Thin Film as Antibacterial Photocatalysts Escherichia Coli Under Visible Light Ilumination","authors":"A. B. Aritonang, Nuri Rozaqina, H. Harlia","doi":"10.19184/bst.v11i3.38055","DOIUrl":"https://doi.org/10.19184/bst.v11i3.38055","url":null,"abstract":"A thin layer of TiO2 doped with Cobalt (II) immobilized on the surface of a titanium foil (Co(II)-TiO2/Ti) has been synthesized from a titanium foil (Ti) as a TiO2 precursor as well as a thin layer matrix and CoCl2.6H2O as a source of Co(II) on variations of 0.5%, 1% and 2%. Synthesis was carried out by anodizing method using ethylene glycol electrolyte solution with the addition of NH4F and followed by calcination treatment at 450ºC for 3 hours. The obtained Co(II)-TiO2 /Ti thin films were characterized using Fourier-transform infrared (FT-IR) spectroscopy, Diffuse Reflectance UV-Vis (DRSUV-Vis) and X-ray diffraction (XRD) methods. Doping Co(II) variations of 0.5%, 1.0% dan 2.0% in the TiO2 structure causes a shift in the vibrational absorption peak of Ti-O (460.99 cm-1) towards a smaller wave number of 459.06 cm-1 respectively ; 453.27 cm-1 and 451.34 cm-1. This is supported by the results of the DRUV-Vis analysis using the tauc plot method, which shows a decrease in the band gap energy of TiO2 (3.24 eV) to 2.57 eV, 2.47 eV and 2.28 eV. Based on XRD analysis, it is known that the Co(II)-TiO2/Ti photocatalyst has anatase phase with a crystal size of 15-17 nm. The photocatalytic activity of Co(II)-TiO2/Ti under visible light illumination was evaluated for inhibition of Escherichia coli bacterial growth. Co(II)-TiO2/Ti photocatalyst at 2.0% Co(II) concentration had the best inhibition (43.2%) compared to 0.5% and 1.0% Co(II) concentrations, respectively 18% inhibition and 27%.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"46 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139332511","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Photosynthetic pigments from microalgae have great potential biotechnological applications, as healthy food colorants and cosmetics. The production of photosynthetic pigments depends on many environmental conditions, mainly light intensity during the cultivation period. The present study aimed to determine the productivity of photosynthetic pigments in the biomass of S. platensis, including total chlorophylls, carotenoids, and phycocyanin, under different light intensities: 40 µmol m–2 s–1 (lower light intensity) and 70 µmol m–2 s–1 (higher light intensity). The results showed that S. platensis culture responds to changes in light intensity by changing the composition of photosynthetic pigments as an adaptive mechanism. The higher carotenoids content (69.69 ± 7.47 µg/g dw) was found under high light intensity, meanwhile, the higher chlorophyll (1495.47 ± 279.00 µg/g dw) and phycocyanin (4995.49 ± 576.52 µg/g dw) contents were observed under low light intensity. The highest productivity of photosynthetic pigments in S. platensis was shown by phycocyanin (318.86 ± 44.22 µg/L/day) and cholophylls (95.38 ± 19.35 µg/L/day) which were produced under low light intensity. Our results show that changes in light intensity can contribute to a stronger effect on the productivity of algal pigments for human health benefits and food colorants.
{"title":"Production of Photosynthetic Pigments from Spirulina platensis Under Different Light Intensities","authors":"Pintaka Kusumaningtyas, Sihol Dwijaya, Usman Gultom","doi":"10.19184/bst.v11i3.38474","DOIUrl":"https://doi.org/10.19184/bst.v11i3.38474","url":null,"abstract":"Photosynthetic pigments from microalgae have great potential biotechnological applications, as healthy food colorants and cosmetics. The production of photosynthetic pigments depends on many environmental conditions, mainly light intensity during the cultivation period. The present study aimed to determine the productivity of photosynthetic pigments in the biomass of S. platensis, including total chlorophylls, carotenoids, and phycocyanin, under different light intensities: 40 µmol m–2 s–1 (lower light intensity) and 70 µmol m–2 s–1 (higher light intensity). The results showed that S. platensis culture responds to changes in light intensity by changing the composition of photosynthetic pigments as an adaptive mechanism. The higher carotenoids content (69.69 ± 7.47 µg/g dw) was found under high light intensity, meanwhile, the higher chlorophyll (1495.47 ± 279.00 µg/g dw) and phycocyanin (4995.49 ± 576.52 µg/g dw) contents were observed under low light intensity. The highest productivity of photosynthetic pigments in S. platensis was shown by phycocyanin (318.86 ± 44.22 µg/L/day) and cholophylls (95.38 ± 19.35 µg/L/day) which were produced under low light intensity. Our results show that changes in light intensity can contribute to a stronger effect on the productivity of algal pigments for human health benefits and food colorants.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"6 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139333322","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-30DOI: 10.19184/bst.v11i3.36679
Winny Laura, Ira Galih, Anri Lovena
Solid waste management in building can be managed with the waste management policy and waste management practice tools. It is contained in the concept of green building. The purpose of this study was to analyze the potential reduce of solid waste in office buildings which is managed by waste management policy and waste management practice tools, and provide scheme recommendations for solid waste management for office buildings the object of this study is Jambi Regional Police Office Building. The methodology was a survey method with solid waste sampling (SNI 19-3964-1994) in Building A, Building B, Canteen and Garden Area and Parking The sampling did for 8 days. Quantitative and quantitative parameters were obtained from the calculation of the generation and composition of solid waste, and also interviews. The results for the generation of solid waste on Jambi Regional Police Office Building: 40.40 kg/day or 0.027 kg/person.day (consist of 45% organic, 28% inorganic, 26% paper and B3 0.7% and others 0.3%). Recommendations scheme can be given for solid waste management in the form of the application of waste management practice tools are started from modification of the waste into separate, collection is done as often as possible, solid waste treatment is done composting and sales to waste banks. The potential for reducing solid waste if the waste management policy and practice tools are applied is 85.64% to 5.8 kg/day.
{"title":"Potential of Reduction Solid Waste from Office Building (Case Study: Gedung Polda Jambi)","authors":"Winny Laura, Ira Galih, Anri Lovena","doi":"10.19184/bst.v11i3.36679","DOIUrl":"https://doi.org/10.19184/bst.v11i3.36679","url":null,"abstract":"Solid waste management in building can be managed with the waste management policy and waste management practice tools. It is contained in the concept of green building. The purpose of this study was to analyze the potential reduce of solid waste in office buildings which is managed by waste management policy and waste management practice tools, and provide scheme recommendations for solid waste management for office buildings the object of this study is Jambi Regional Police Office Building. The methodology was a survey method with solid waste sampling (SNI 19-3964-1994) in Building A, Building B, Canteen and Garden Area and Parking The sampling did for 8 days. Quantitative and quantitative parameters were obtained from the calculation of the generation and composition of solid waste, and also interviews. The results for the generation of solid waste on Jambi Regional Police Office Building: 40.40 kg/day or 0.027 kg/person.day (consist of 45% organic, 28% inorganic, 26% paper and B3 0.7% and others 0.3%). Recommendations scheme can be given for solid waste management in the form of the application of waste management practice tools are started from modification of the waste into separate, collection is done as often as possible, solid waste treatment is done composting and sales to waste banks. The potential for reducing solid waste if the waste management policy and practice tools are applied is 85.64% to 5.8 kg/day.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"31 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139332464","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-30DOI: 10.19184/bst.v11i3.38163
Septian Gusti Sucahyo, Dwi Nurtanto, Nanin Meyfa Utami
One of the problems in the construction field, especially concrete, is to reduce cracking due to the brittle nature of the concrete itself and increase the strength of the concrete. One of the ingredients to minimize cracks in concrete is the addition of fiber in the concrete mixture. Therefore, additional innovation is needed in the manufacture of concrete. So, this research was carried out by discussing the use of bendrat wire on the mechanical properties of geopolymer concrete. This study aims to determine the results of compressive strength, split tensile strength, and flexural strength with variations in the addition of 0%, 6%, 12%, and 18% were using a 2% superplasticizer with a concrete age of 28 days. The addition of bendrat wire from 0%, 6%, 12%, and 18% of the test results has increased. For compressive strength, respectively, 40.34 MP, 40.552 Mpa, 40.977 Mpa, and 41.189 MPa. For the splitting tensile strength result, which is 2.07 MPa;, 2.123 MPa, 2.176 MPa, and 2.229 MPa. For flexural strength, 4.05 Mpa, 4.09 Mpa, 4.16 Mpa, and 4.25 MPa.
{"title":"Utilization of Bendrat Wire fiber on the Mechanical Properties of Geopolymer Concrete","authors":"Septian Gusti Sucahyo, Dwi Nurtanto, Nanin Meyfa Utami","doi":"10.19184/bst.v11i3.38163","DOIUrl":"https://doi.org/10.19184/bst.v11i3.38163","url":null,"abstract":"One of the problems in the construction field, especially concrete, is to reduce cracking due to the brittle nature of the concrete itself and increase the strength of the concrete. One of the ingredients to minimize cracks in concrete is the addition of fiber in the concrete mixture. Therefore, additional innovation is needed in the manufacture of concrete. So, this research was carried out by discussing the use of bendrat wire on the mechanical properties of geopolymer concrete. This study aims to determine the results of compressive strength, split tensile strength, and flexural strength with variations in the addition of 0%, 6%, 12%, and 18% were using a 2% superplasticizer with a concrete age of 28 days. The addition of bendrat wire from 0%, 6%, 12%, and 18% of the test results has increased. For compressive strength, respectively, 40.34 MP, 40.552 Mpa, 40.977 Mpa, and 41.189 MPa. For the splitting tensile strength result, which is 2.07 MPa;, 2.123 MPa, 2.176 MPa, and 2.229 MPa. For flexural strength, 4.05 Mpa, 4.09 Mpa, 4.16 Mpa, and 4.25 MPa.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"4 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139333011","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-09-29DOI: 10.19184/bst.v11i3.38122
Ismi Nurlatifah, M. Amyranti
Porang (Amorphophallus Muelleri Blume) is a type of tuber that contains various nutrients, especially glucomannan. Besides as being a source of food, the high content of glucomannan can also be used as an alternative for making edible films, because it contains mannan polymers which have the ability to form fine and crystallized fibers. The purpose of this research is to determine the potential of glucomannan in porang tuber flour as a basis for making edible films. Glucomannan used with various variations (3, 6 and 9 grams). The first stages used were testing porang tuber flour and then made edible film base by carrying out various chemical analyzes based on the Japanesse Industrial Standard method. The results showed that the acquisition of water, ash and protein sequentially was 11.782%, 1.821%, 6.275% which conform to the SNI 7939;2013 standards. The 3 gram variation and 0.087 mm thickness of Glucomann showed the best water resistance value of 20.34%. The biodegradability test showed that the 6 grams variation of glucomannan had the best degradation ability, that is 100% for 12 days.
{"title":"The Utilization from Glucomannan of Porang Flour (Amorphophallus Muelleri Blume) as a Raw Material for Making an Edible Film","authors":"Ismi Nurlatifah, M. Amyranti","doi":"10.19184/bst.v11i3.38122","DOIUrl":"https://doi.org/10.19184/bst.v11i3.38122","url":null,"abstract":"Porang (Amorphophallus Muelleri Blume) is a type of tuber that contains various nutrients, especially glucomannan. Besides as being a source of food, the high content of glucomannan can also be used as an alternative for making edible films, because it contains mannan polymers which have the ability to form fine and crystallized fibers. The purpose of this research is to determine the potential of glucomannan in porang tuber flour as a basis for making edible films. Glucomannan used with various variations (3, 6 and 9 grams). The first stages used were testing porang tuber flour and then made edible film base by carrying out various chemical analyzes based on the Japanesse Industrial Standard method. The results showed that the acquisition of water, ash and protein sequentially was 11.782%, 1.821%, 6.275% which conform to the SNI 7939;2013 standards. The 3 gram variation and 0.087 mm thickness of Glucomann showed the best water resistance value of 20.34%. The biodegradability test showed that the 6 grams variation of glucomannan had the best degradation ability, that is 100% for 12 days.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"53 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"139334718","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-14DOI: 10.19184/bst.v11i2.37546
Fandi Bachtiar Nduru, Nur Yanu Nugroho
In the shipbuilding process, delays often occur. In general, to speed up a ship's construction, overtime is carried out by workers until nighttime. Environmental conditions in a welding process, especially air humidity, strongly affect the properties of welded joints. The formation of hydrogen in the air caused by an inappropriate environment can cause defects in welded joints, especially porosity defects. Variations of welding environmental conditions used, are welding in the morning at 84% air humidity, daytime welding at 53% air humidity, and nighttime welding at 77% air humidity. This study aims to determine the material strength of air humidity variations during the welding process on the tensile strength and impact strength of 5052 aluminum material. This research uses experimental quantitative methods data analysis techniques used analysis of variance (ANOVA). The results showed that the higher the air humidity, the tensile and impact strength decreased. From the results of the tensile test, there is an influence of air humidity on the average value of tensile strength, where the highest value is found in the daytime welding variation specimen with 53% air humidity, worth 110.614 MPa. From the impact test results, there is an influence of air humidity on the average value of impact toughness, where the highest value is found in the daytime welding variation specimen with 53% air humidity, worth 89.42 J/mm2. From the ANOVA test results, the average tensile test and impact test have no significant differences.
{"title":"Effect of Air Humidity in MIG Welded Joints on Tensile Strength and Impact Strength of Aluminum 5052","authors":"Fandi Bachtiar Nduru, Nur Yanu Nugroho","doi":"10.19184/bst.v11i2.37546","DOIUrl":"https://doi.org/10.19184/bst.v11i2.37546","url":null,"abstract":"In the shipbuilding process, delays often occur. In general, to speed up a ship's construction, overtime is carried out by workers until nighttime. Environmental conditions in a welding process, especially air humidity, strongly affect the properties of welded joints. The formation of hydrogen in the air caused by an inappropriate environment can cause defects in welded joints, especially porosity defects. Variations of welding environmental conditions used, are welding in the morning at 84% air humidity, daytime welding at 53% air humidity, and nighttime welding at 77% air humidity. This study aims to determine the material strength of air humidity variations during the welding process on the tensile strength and impact strength of 5052 aluminum material. This research uses experimental quantitative methods data analysis techniques used analysis of variance (ANOVA). The results showed that the higher the air humidity, the tensile and impact strength decreased. From the results of the tensile test, there is an influence of air humidity on the average value of tensile strength, where the highest value is found in the daytime welding variation specimen with 53% air humidity, worth 110.614 MPa. From the impact test results, there is an influence of air humidity on the average value of impact toughness, where the highest value is found in the daytime welding variation specimen with 53% air humidity, worth 89.42 J/mm2. From the ANOVA test results, the average tensile test and impact test have no significant differences.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"119 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124601675","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2023-06-09DOI: 10.19184/bst.v11i2.39190
Diyas Aledya Yahya, I. Permatasari, S. Ma’mun
Green betel (Piper betle L.) leaf contains anti-thrush, anti-cough, astringent, and antiseptic chemicals such as saponins, flavonoids, polyphenols, and essential oils. Hand sanitizer can also be used as an antiseptic agent, which is a more practical option. The purpose of this study was to see how the composition of green betel leaf extract made by infusion affected its physical properties and bacterial inhibition. Hand sanitizer samples were made using different concentrations of green betel leaf extract (10 - 25 wt%) with and without the addition of tea tree essential oil. Sample testing included organoleptic tests, physical properties tests, and effectiveness tests on the growth of Escherichia coli bacteria. The results showed that the best composition was found to be at a concentration of 10 wt% green betel leaf extract without the addition of essential oil, with pH ranging from 5.2 to 5.8 and viscosities ranging from 1.32 to 1.99 cps, in the form of a watery gel and a clear yellow color. Meanwhile, hand sanitizer sensitivity testing revealed that none of the samples could inhibit the growth of Escherichia coli bacteria. This indicates that the concentration of green betel leaf extract in the sample is still insufficient to inhibit bacterial growth.
{"title":"An Investigation into the Effectiveness of Green Betel (Piper betle L.) Leaf Extract Hand Sanitizer","authors":"Diyas Aledya Yahya, I. Permatasari, S. Ma’mun","doi":"10.19184/bst.v11i2.39190","DOIUrl":"https://doi.org/10.19184/bst.v11i2.39190","url":null,"abstract":"Green betel (Piper betle L.) leaf contains anti-thrush, anti-cough, astringent, and antiseptic chemicals such as saponins, flavonoids, polyphenols, and essential oils. Hand sanitizer can also be used as an antiseptic agent, which is a more practical option. The purpose of this study was to see how the composition of green betel leaf extract made by infusion affected its physical properties and bacterial inhibition. Hand sanitizer samples were made using different concentrations of green betel leaf extract (10 - 25 wt%) with and without the addition of tea tree essential oil. Sample testing included organoleptic tests, physical properties tests, and effectiveness tests on the growth of Escherichia coli bacteria. The results showed that the best composition was found to be at a concentration of 10 wt% green betel leaf extract without the addition of essential oil, with pH ranging from 5.2 to 5.8 and viscosities ranging from 1.32 to 1.99 cps, in the form of a watery gel and a clear yellow color. Meanwhile, hand sanitizer sensitivity testing revealed that none of the samples could inhibit the growth of Escherichia coli bacteria. This indicates that the concentration of green betel leaf extract in the sample is still insufficient to inhibit bacterial growth.","PeriodicalId":353803,"journal":{"name":"BERKALA SAINSTEK","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130667855","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：