华西口腔医学杂志最新文献

Objectives: This study aimed to explore the functions and potential regulatory targets of local macrophages in nonalcoholic fatty liver combined with Porphyromonas gingivalis (P. gingivalis)infection.

Methods: Single-cell RNA sequencing was used to analyze the phenotypes and functional changes in various cells in the liver tissue of nonalcoholic steatohepatitis (NASH) mice fed with P. gingivalis. Real-time polymerase chain reaction (RT-PCR), enzyme-linked immunosorbent assay, and immunofluorescence staining were applied to observe the inflammation and expression levels of macrophage antigen presenting functional markers in the NASH liver. Oil red staining was performed to observe the accumulation of local adipose tissue in the NASH liver. Results were verified through RT-PCRand RNA sequencing using P. gingivalis-lipopolysaccharide treated mouse peritoneal macrophages.

Results: In comparison with healthy livers with Kupffer cells, the NASH liver combined with P. gingivalis infection-related macrophages showed significant heterogeneity. C1qb, C1qc, Mafb, Apoe, and Cd14 were highly expressed, but Cd209a, H2-Aa, H2-Ab1, and H2-DMb1, which are related to the antigen presentation function, were weakly expressed. Further in vivo and in vitro investigations indicated that the activation and infiltration of these macrophages may be due to local P. gingivalis-lipopolysaccharide accumulation.

Conclusions: P. gingivalis-lipopolysaccharide induces a local macrophage immunotolerance phenotype in nonalcoholic fatty liver, which may be the key mechanism of periodontitis pathogen infection that promotes NASH inflammation and pathogenesis. This study further clarifies the dysfunction and regulatory mechanisms of macrophages in the pathogenesis of P. gingivalis-infected NASH, thereby providing potential therapeutic targets for its clinical treatment.

Dentofacial deformities secondary to condylar hyperplasiais a kind of disease presenting facial asymmetry, malocclusion, temporomandibular joint dysfunction, and other symptoms caused by non-neoplastic hyperplasia of the condyle. The etiology is still unknown, and currently, pre- and post-operative orthodontics accompanied by orthognathic surgery, temporomandibular joint surgery and jawbone contouring surgery are the main treatment methods. A personalized treatment plan was developed, considering the active degree of condyle hyperplasia, the severity of the jaw deformity, and the patient's will, to correct deformity, obtain ideal occlusal relationship, and regain good temporomandibular joint function. Combined with the author's clinical experience, the etiology, clinical and imageological features, treatment aims, and surgical methods of condylar hyperplasia and secondary dentofacial deformities were discussed in this paper.

Objectives: This study aimed to construct the finite element model of the mandibular first molar with the invisible appliance and explore the dentition movement characteristics of the mandibular first molar when using micro-implant anchorage and different initial positions of the first molar.

Methods: Models of the mandible, tooth, periodontal membrane, and invisible appliance were constructed using cone beam computed tomography (CBCT) data. The two groups were divided into the non-anchorage group and the micro-implant group (between the roots of the first molar and the second molar) based on whether the elastic traction of the micro-implant was assisted or not. The two groups were divided into the following conditions based on the starting position of the first molar: Working condition 1: the distance between the first molar and the second premolar was 0 mm; working condition 2: the distance between the first molar and the second premolar was 1 mm; working condition 3: the distance between the first molar and the second premolar was 2 mm; working condition 4: the distance between the first molar and the second premolar was 3 mm. The data characte-ristics of total displacement and displacement in each direction of dentition were analyzed.

Results: In the non-ancho-rage group, all the other teeth showed reverse movement except for the first molar which was moved distally. Meanwhile, in the micro-implant group, except for a small amount of mesial movement of the second molar in wor-king condition 1, the whole dentition in other working conditions presented distal movement and anterior teeth showed lingual movement, among which the distal displacement of the first molar in working condition 4 was the largest. With the change of the initial position of the first molar to the distal, the movement of the first molar to the distal, the premolar to the mesial, and the anterior to the lip increased, while the movement of the second molar to the mesial decreased.

Conclusions: The micro-implant can effectively protect the anterior anchorage, increase the expression rate of molar distancing, and avoid the round-trip movement of the second molar. The initial position of the first molar movement is related to the amount of distancing and the remaining tooth movement.

When the use of root canal retreatment and apical surgery experiences difficulty in treating endodontic diseases, intentional replantation is an optional clinical technique used to retain the tooth. A 28-year-old female complained of chewing discomfort at the mandibular second molar after undergoing root canal treatment 3 month ago. History record and radiographic examination revealed that a C-shaped root canal system was filled with gutta-percha in the mandibular second molar. A radiolucency area existed at the root furcal area with a thin canal wall in the distal and mesial roots. Intentional replantation was used to treat this tooth. The clinical and radiographic results showed that intentional replantation and nano-biomaterial application facilitated infection control, tooth retention, and periodontal tissue regeneration.

Using digital technologies in concurrently performing missing tooth implantation and preparation of remaining teeth is a solution to reduce the number of visits and improve efficiency. This paper proposes a digital process for simultaneously implanting and preparing teeth. It integrates implant surgical guide and 3D-printed tooth preparation guide into a single guide and completes guided implant placement and precise tooth preparation. Based on "repair-oriented" virtual implant planning, the implant surgical guide can improve the efficiency and predictability of implant placement, and its linear accuracy is about 1 mm. The tooth preparation guide precisely guides tooth preparation and restoration space visualization, ensuring the quality of the tooth preparation. The two guides have different design accuracy requirements, and thus their combination improves the overall guiding accuracy requirements. The concurrent application of the two guides minimizes the clinical operation time, number of visits, and economic burden of patients.

Objectives: This work aimed to investigate the molecular mechanism of cyclic tensile stress (CTS) stimulating autophagy in human periodontal ligament cells (hPDLCs).

Methods: hPDLCs were isolated and cultured from normal periodontal tissues. hPDLCs were loaded with tensile stress by force four-point bending extender to simulate the autophagy of hPDLCs induced by orthodontic force du-ring orthodontic tooth movement. XMU-MP-1 was used to inhibit the Hippo signaling pathway to explore the role of the Hippo-YAP signaling pathway in activating hPDLC autophagy by tensile stress. The expression levels of autophagy-related genes (Beclin-1, LC3, and p62) in hPDLCs were detected by real-time quantitative polymerase chain reaction. Western blot was used to detect the expression levels of autophagy-related proteins (Beclin-1, LC3-Ⅱ/LC3-Ⅰ, and p62) and Hippo-YAP pathway proteins (active-YAP and p-YAP) in hPDLCs. Immunofluorescence was used to locate autophagy-related proteins (LC3-Ⅱand p62) and Hippo-YAP pathway proteins (active-YAP) of hPDLCs.

Results: CTS-activated autophagy in hPDLCs and expression of autophagy-related proteins initially increased and then decreased; it began to increase at 30 min, peaked at 3 h, and decreased (P<0.05). CTS increased the expression of active-YAP protein and decreased the expression of p-YAP protein (P<0.05). When XMU-MP-1 inhibited the Hippo-YAP signaling pathway (P<0.05), active-YAP protein was promoted to enter the nucleus and autophagy expression was enhanced (P<0.05).

Conclusions: The Hippo-YAP signaling pathway is involved in the regulation of autophagy activation in hPDLCs under CTS.

Objectives: This study aimed to clarify the effects of Foxp3 silencing on the expression of inflammatory cytokines in human periodontal ligament cells (hPDLFs) in an inflammatory environment and on cell proliferation and invasiveness, as well as to explore the role of Foxp3 gene in the development of periodontitis.

Methods: An small interfering RNA (siRNA) construct specific for Foxp3 was transfected into hPDLFs. Foxp3 silencing efficiency was verified by reverse transcription-polymerase chain reaction (RT-PCR) and Western blotting, and the siRNA with the optimum silencing effect of Foxp3 gene was screened. Using lipopolysaccharide to simulate an inflammatory environment in vitro, CCK-8 detected the effect of silencing Foxp3 on hPDLFs proliferation under inflammatory conditions. Wound-healing experiments and transwell assays were conducted to detect the effect of silencing Foxp3 on hPDLF migration under inflammatory conditions. The expression of the inflammatory cytokines interleukin (IL)-6 and IL-8 was detected by RT-PCR and Western blotting under inflammatory conditions.

Results: After siRNA transfection, RT-PCR and Western blotting analyses showed that the expression of Foxp3 mRNA in the Foxp3-si3 group decreased significantly (t=21.03, P<0.000 1), and the protein expression of Foxp3 also decreased significantly (t=12.8, P<0.001). In the inflammatory environment, Foxp3 gene silencing had no significant effect on hPDLFs proliferation (P>0.05), and Foxp3 gene silencing promoted hPDLFs migration (P<0.05). Moreover, the expression of IL-6 and IL-8 increased (P<0.05).

Conclusions: In an inflammatory environment, Foxp3 gene silencing promoted hPDLFs migration but had no significant effect on hPDLFs proliferation. The expression of inflammatory factors expressed in hPDLFs increased after Foxp3 gene silencing, indicating that Foxp3 gene inhibited inflammation in periodontitis.

Objectives: To review the effectiveness of secondary alveolar bone grafting using iliac cancellous bone in patients with unilateral complete alveolar cleft and to investigate the factors influencing it.

Methods: A retrospective study of 160 patients with unilateral complete alveolar clefts who underwent iliac cancellous bone graft repair at the Department of Cleft Lip and Palate Surgery, West China Hospital of Stomatology, Sichuan University, was conducted. Eighty patients in the young age group (6-12 years) and 80 in the old age group (≥13 years) were included. Bone bridge formation was determined using Mimics software, and the volume was measured to calculate the iliac implantation rate, residual bone filling rate, and resorption rate. The factors that affected bone grafting in both subgroups were investigated.

Results: Using bone bridge formation as the clinical success criterion, the success rate for the entire population was 71.25%, with a significant difference of 78.75% and 63.75% for the young and old age groups, respectively (P=0.036). The gap volume in the latter was significantly larger than that in the former (P<0.001). The factors that influenced bone grafting in the young group were the palatal bone wall (P=0.006) and history of cleft palate surgery (P=0.012), but only the palatal bone wall affected the outcome in the old age group (P=0.036).

Conclusions: The results of alveolar bone grafting for the old age group were worse than those for the young age group. The palatal bone wall was an important factor that affected alveolar bone grafting, and alveolar bone grafting in the young patients was influenced by the history of cleft palate surgery.

Objectives: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group.

Methods: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis.

Results: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group.

Conclusions: The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.

Objectives: This study aimed to compare the effects of virtual adjustment on occlusal interferences in mandibular posterior single crown and three-unit bridge restorations by using the mandibular movement track and the movement parameters of a virtual articulator.

Methods: Twenty-two participants were recruited. Digital casts of the maxillary and mandibular arches were obtained using an intraoral scanner, and the jaw registration system was used to record the data of the mandibular movement track and the movement parameters of the articulator. Four kinds of restorations with 0.3 mm occlusal interferences were designed with dental design software. In particular, single crowns were designed for teeth 44 and 46, whereas three-unit bridges were designed for teeth 44-46 and 45-47, and the corresponding natural teeth were virtually extracted. Virtual adjustment of the restorations was performed using two dynamic occlusal recordings, namely, the mandibular movement track and the movement parameters of the virtual articulator. A reverse-engineering software was used to measure the root-mean-square of the three-dimensional deviation of the occlusal surfaces between natural teeth and the adjusted restorations. The differences between the two methods of virtual-occlusion adjustment were compared and analyzed.

Results: For the same group of restorations, the three-dimensional deviation of the mandibular movement track group were lower than those of the virtual articulator group, and the differences were statistically significant (P<0.05). For the four groups of restorations adjusted by the same method, the three-dimensional deviation of the 46-tooth single crown was the largest and the smallest three-dimensional deviation was that of the 44-tooth single crown. Statistical differences existed between the 44-tooth single crown and the other groups (P<0.05).

Conclusions: For the occlusal design of posterior single crown and three-unit bridge, the mandibular movement track could be a more effective approach to virtual occlusal adjustment than the movement parameters of the virtual articulator.