Pub Date : 1900-01-01DOI: 10.5220/0009427203420348
Wijoyo Niti Daton, Ezra Revolin, Siptian Nugrahawan, P. A. Aziz, T. Ariadji, S. Chandra, J. Nainggolan
Natural gas extracted from its respective reservoir needs to be processed to meet the specifications of sales gas. CO2 is one of the components that needs to be separated from natural gas. The CO2 concentration of natural gas varies from a content of less than 20 mole % to more than 80 mole%. There is a problem when the content of CO2 is very high so it is necessary to modify the CO2 level reduction by modifying the equipment or changing the operating conditions to meet the desired CO2 purity. In this study, field conditions and characteristics reviewed is East Natuna Gas Field which has a gas composition of 71% CO2 and 29% methane with modified pressure based on the capability and capacity of available equipment. From the conditions and characteristics of the field, the CO2 method of separation from natural gas using cryogenic distillation was chosen.This research presents analysis and sensitivity of technical parameters that influence the method of CO2 separation from natural gas using cryogenic distillation. The sensitivity is done by changing parameters of pressure and very high feed gas flow rate into the column. In addition, the calculation of the diameter and height of the distillation column using the calculation of the formula and the results of the simulation using commercial process flow software. This study applies a CO2 separation process with cryogenic distillation and the desired product specification of CH 4 is 99%. The design of the equipment was simulated using two distillation columns with operating pressure at the first distillation column of 45 bar and the temperature of 19.19 oF, and for the second distillation column the operating pressure was reduced to 35 bar. The results are for the 8000 MMSCFD flow rate case obtained the first number of columns as many as 16 with the size of 7.4 meters diameter and 17.66 meters high, while the number of second column of 4 with the size of 8 meters diameter and 22.38 meters high. The results presented are still less suitable with the conditions in the East Natuna Gas Field because offshore constrains so need to be studied further for design and other methods in application in the field.
{"title":"A Solution to Increase Natuna D Alpha’s Resource Utilization by Cryogenic Distillation: Conceptual Design & Sensitivity Study","authors":"Wijoyo Niti Daton, Ezra Revolin, Siptian Nugrahawan, P. A. Aziz, T. Ariadji, S. Chandra, J. Nainggolan","doi":"10.5220/0009427203420348","DOIUrl":"https://doi.org/10.5220/0009427203420348","url":null,"abstract":"Natural gas extracted from its respective reservoir needs to be processed to meet the specifications of sales gas. CO2 is one of the components that needs to be separated from natural gas. The CO2 concentration of natural gas varies from a content of less than 20 mole % to more than 80 mole%. There is a problem when the content of CO2 is very high so it is necessary to modify the CO2 level reduction by modifying the equipment or changing the operating conditions to meet the desired CO2 purity. In this study, field conditions and characteristics reviewed is East Natuna Gas Field which has a gas composition of 71% CO2 and 29% methane with modified pressure based on the capability and capacity of available equipment. From the conditions and characteristics of the field, the CO2 method of separation from natural gas using cryogenic distillation was chosen.This research presents analysis and sensitivity of technical parameters that influence the method of CO2 separation from natural gas using cryogenic distillation. The sensitivity is done by changing parameters of pressure and very high feed gas flow rate into the column. In addition, the calculation of the diameter and height of the distillation column using the calculation of the formula and the results of the simulation using commercial process flow software. This study applies a CO2 separation process with cryogenic distillation and the desired product specification of CH 4 is 99%. The design of the equipment was simulated using two distillation columns with operating pressure at the first distillation column of 45 bar and the temperature of 19.19 oF, and for the second distillation column the operating pressure was reduced to 35 bar. The results are for the 8000 MMSCFD flow rate case obtained the first number of columns as many as 16 with the size of 7.4 meters diameter and 17.66 meters high, while the number of second column of 4 with the size of 8 meters diameter and 22.38 meters high. The results presented are still less suitable with the conditions in the East Natuna Gas Field because offshore constrains so need to be studied further for design and other methods in application in the field.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121936978","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009129901200124
F. Syarif, H. Kausarian, D. B. E. Putra
: In the Pekanbaru-Dumai highway road construction in Section 5 will be built a bridge. The construction of the bridge is in the area of PT TGI gas pipeline. The construction of this bridge uses a pile foundation whose pile is carried out using a beating method using a hammer. The diameter of this pile is 60 cm with a hammer weight of 5 tons and a height of fall of 2.5 meters. This work method will produce vibrations that affect the condition of the gas pipe. One of the aspects that are affected by vibration is the deformation of the soil around the gas pipe. This soil deformation will affect the position of the gas pipe which, if it forms a fairly large slope, may cause gas pipelines to crack. The method used to determine the effect of vibration from the design of the gas pipeline is to use a vibration meter tool. vibration meter is a sensor device that is placed on the stake and on the ground above the gas pipe so that how much vibration and deformation of the soil can be seen. As a result from the test using vibration meter, it was found that the greater the wave velocity due to the design, the greater the deformation that occurs on the soil.
{"title":"Impact of Vibration of Piling Hammer on Soil Deformation: Study Case in Highway Construction Section 5 Pekanbaru-Dumai","authors":"F. Syarif, H. Kausarian, D. B. E. Putra","doi":"10.5220/0009129901200124","DOIUrl":"https://doi.org/10.5220/0009129901200124","url":null,"abstract":": In the Pekanbaru-Dumai highway road construction in Section 5 will be built a bridge. The construction of the bridge is in the area of PT TGI gas pipeline. The construction of this bridge uses a pile foundation whose pile is carried out using a beating method using a hammer. The diameter of this pile is 60 cm with a hammer weight of 5 tons and a height of fall of 2.5 meters. This work method will produce vibrations that affect the condition of the gas pipe. One of the aspects that are affected by vibration is the deformation of the soil around the gas pipe. This soil deformation will affect the position of the gas pipe which, if it forms a fairly large slope, may cause gas pipelines to crack. The method used to determine the effect of vibration from the design of the gas pipeline is to use a vibration meter tool. vibration meter is a sensor device that is placed on the stake and on the ground above the gas pipe so that how much vibration and deformation of the soil can be seen. As a result from the test using vibration meter, it was found that the greater the wave velocity due to the design, the greater the deformation that occurs on the soil.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131543356","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009145801510154
S. Ulpah, N. Sutrisna, .. Fahroji, Suhendri Saputra, Sri Swastika
: Indragiri Hilir is a Regency in Riau Province where about 70% of its population depend on coconut plantation. In 2018, a devastating outbreak of a coconut pest, Oryctes rhinoceros has been reported from several locations. The pest explosion in Tanjung Simpang Village, Pelangiran sub-district, has aroused conflict between coconut palm farmers and the oil palm plantation company in the area regarding the source of the pest infestation. An independent scientific investigation was conducted to address the problem. Steps carried out including survey, interview, field investigation, and trapping. Survey was carried out to determine the center of infestation by evaluating damage intensity through interview and field assessment by direct visual evaluation and with the aid of drone. Spotting of breeding site was done in the vicinity of plant infested area. Digging and delving breeding sites were done to assess the beetle and its larvae. Trapping using pheromone trap was intended to evaluate the beetle distribution. Interview was perfomed both to the coconut farmers and and the company staff to investigate the infestation chronology and activities in the oil palm plantation. The findings indicated through the research were then revealed to the both parties and also to the authority as elucidated in this paper.
{"title":"The Incidence of Rhinoceros Beetle Outbreak in Public Coconut Plantation in Tanjung Simpang Village, Indragiri Hilir, Riau Province","authors":"S. Ulpah, N. Sutrisna, .. Fahroji, Suhendri Saputra, Sri Swastika","doi":"10.5220/0009145801510154","DOIUrl":"https://doi.org/10.5220/0009145801510154","url":null,"abstract":": Indragiri Hilir is a Regency in Riau Province where about 70% of its population depend on coconut plantation. In 2018, a devastating outbreak of a coconut pest, Oryctes rhinoceros has been reported from several locations. The pest explosion in Tanjung Simpang Village, Pelangiran sub-district, has aroused conflict between coconut palm farmers and the oil palm plantation company in the area regarding the source of the pest infestation. An independent scientific investigation was conducted to address the problem. Steps carried out including survey, interview, field investigation, and trapping. Survey was carried out to determine the center of infestation by evaluating damage intensity through interview and field assessment by direct visual evaluation and with the aid of drone. Spotting of breeding site was done in the vicinity of plant infested area. Digging and delving breeding sites were done to assess the beetle and its larvae. Trapping using pheromone trap was intended to evaluate the beetle distribution. Interview was perfomed both to the coconut farmers and and the company staff to investigate the infestation chronology and activities in the oil palm plantation. The findings indicated through the research were then revealed to the both parties and also to the authority as elucidated in this paper.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125245613","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009146501690174
P. Astuti, Syaifullah Rosadi, F. Asteriani, Eka Pratiwi, Thalia Amanda Putri
: The market existence is one of the most apparent indicators of economic activities.The increasing of modern market development in Pekanbaru cause changing public perception in shopping activity on the use of traditional market facilities. The study purpose is identify community perception of trading facilities on tradisional market to formulate policies relating to improving market services to the community. The analysis technique used quantitative descriptive analysis. Its analyzing the level of customer satisfaction and assessment of service condition; complete and price certainty of goods, market comfort, market cleanliness, availability of facilities, and market security. For traditional market services measured from sellers politeness, sellers readiness and sellers friendliness. Based on research concluded the level of customer satisfaction in the traditional markets is not satisfactory and assessment of service conditions is satisfactory.
{"title":"The Community Perception of Traditional Market Services in Pekanbaru City, Riau Province","authors":"P. Astuti, Syaifullah Rosadi, F. Asteriani, Eka Pratiwi, Thalia Amanda Putri","doi":"10.5220/0009146501690174","DOIUrl":"https://doi.org/10.5220/0009146501690174","url":null,"abstract":": The market existence is one of the most apparent indicators of economic activities.The increasing of modern market development in Pekanbaru cause changing public perception in shopping activity on the use of traditional market facilities. The study purpose is identify community perception of trading facilities on tradisional market to formulate policies relating to improving market services to the community. The analysis technique used quantitative descriptive analysis. Its analyzing the level of customer satisfaction and assessment of service condition; complete and price certainty of goods, market comfort, market cleanliness, availability of facilities, and market security. For traditional market services measured from sellers politeness, sellers readiness and sellers friendliness. Based on research concluded the level of customer satisfaction in the traditional markets is not satisfactory and assessment of service conditions is satisfactory.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122289703","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009092700490054
N. A. Hadi, N. Alias
: In this paper, a CPU-GPU algorithm to generate composite contour for 3D branching surface is presented. The composite contour is generated based on the data points from based and branched contours and located in between the two contours. Distance calculation is one of the processes in composite contour generation which consumes the most CPU time, therefore, this process is chosen to be executed on the GPU. The developed composite contour generation method on the CPU-GPU platform is then applied on CT images of Stanford bunny and human pelvic with three different number of curve points per segment. These samples generate 12 composite contours in total. The performance of the developed algorithm is measured based on the processing time and the speedup. The result shows that the CPU-GPU algorithm has improved the speedup as high as 150 times.
{"title":"The Performance of 3D Multi-slice Branched Surface Reconstruction on CPU-GPU Platform","authors":"N. A. Hadi, N. Alias","doi":"10.5220/0009092700490054","DOIUrl":"https://doi.org/10.5220/0009092700490054","url":null,"abstract":": In this paper, a CPU-GPU algorithm to generate composite contour for 3D branching surface is presented. The composite contour is generated based on the data points from based and branched contours and located in between the two contours. Distance calculation is one of the processes in composite contour generation which consumes the most CPU time, therefore, this process is chosen to be executed on the GPU. The developed composite contour generation method on the CPU-GPU platform is then applied on CT images of Stanford bunny and human pelvic with three different number of curve points per segment. These samples generate 12 composite contours in total. The performance of the developed algorithm is measured based on the processing time and the speedup. The result shows that the CPU-GPU algorithm has improved the speedup as high as 150 times.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130952970","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009185802370242
H. Kausarian, M. Lubis, .. Primawati, D. B. E. Putra, A. Suryadi, .. Batara
: Photogrammetry is a good method for determining the geometric properties of an object from the images. The geometry of the object obtained from two or more drawings that are overlaid. It is completely autonomous, ultra-lightweight so-called Unmanned Aerial Vehicle (UAV) which has been commercially available at very economical prices in the community or researchers, and photogrammetric applications. The study area was located at Bintan Island, Riau Islands Province, Indonesia, collecting data on 8th may, 2017 (1 ◦ 3’45.98”N - 104 ◦ 27’49.22”E), with DJI phantom 4 including control range small format air photography (SFAP) which is a low-cost, cost-effective solution for obtaining bridge surface imagery and can also be proposed as a long-distance bridge inspection technique to complement the current bridge visual inspection in Indonesia. Some examples of evaluations on bridges using SFAP are presented to provide remote sensing information and capabilities that serve as an essential tool for monitoring and assessing the construction of the bridge. The measurement of Bintan Bridge is 193 m, the photos were taken from the airplanes around 70 meters and providing top-down views. Bintan Bridge’s structure have specify second distance in left wide is 1.057 < 1560, and specify second distance in right wide is 0.9981 < 1570.
{"title":"Aerial Photogrammetry and Object-based Image Analysis for Bridge Mapping: A Case Study on Bintan Bridge, Riau Islands, Indonesia","authors":"H. Kausarian, M. Lubis, .. Primawati, D. B. E. Putra, A. Suryadi, .. Batara","doi":"10.5220/0009185802370242","DOIUrl":"https://doi.org/10.5220/0009185802370242","url":null,"abstract":": Photogrammetry is a good method for determining the geometric properties of an object from the images. The geometry of the object obtained from two or more drawings that are overlaid. It is completely autonomous, ultra-lightweight so-called Unmanned Aerial Vehicle (UAV) which has been commercially available at very economical prices in the community or researchers, and photogrammetric applications. The study area was located at Bintan Island, Riau Islands Province, Indonesia, collecting data on 8th may, 2017 (1 ◦ 3’45.98”N - 104 ◦ 27’49.22”E), with DJI phantom 4 including control range small format air photography (SFAP) which is a low-cost, cost-effective solution for obtaining bridge surface imagery and can also be proposed as a long-distance bridge inspection technique to complement the current bridge visual inspection in Indonesia. Some examples of evaluations on bridges using SFAP are presented to provide remote sensing information and capabilities that serve as an essential tool for monitoring and assessing the construction of the bridge. The measurement of Bintan Bridge is 193 m, the photos were taken from the airplanes around 70 meters and providing top-down views. Bintan Bridge’s structure have specify second distance in left wide is 1.057 < 1560, and specify second distance in right wide is 0.9981 < 1570.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130237918","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009129401020108
Muhammad Ariyon, N. Rita, T. Setiawan
: The wells of X fields are vertical wells with installed pumps being the Hydraulic Pumping Unit. The wells can still be optimized by improving the performance of N and SL by trial and error method. Based on optimation analysis result at well BM 1 by changing SPM and SL parameters on pump which installed with N 6 SPM and SL 100 inch got Qt equal to 144 bfpd, then converted to N 7 SPM and SL 100 inch so that there increase of Qt become equal to 199 bfpd And pump efficiency from 67% to 80%. While in the well BM 2 by changing the parameters of SPM and SL on pumps installed with N 8 SPM and SL 100 inch obtained Qt of 284 bfpd, then converted to N 10 SPM and SL 110 inch so that there is an increase of Qt to equal to 583 bfpd pump efficiency of 65% to 90%. In the economic analysis with Production Sharing Contract system can be known with non-capital investment of MMUS $ 0.150, obtained NPV contractor MUS $ 451.07, IRR > MARR,POT < 1 year and DPI 4.00.
{"title":"Analysis of Economy in the Improvement of Oil Production using Hydraulic Pumping Unit in X Field","authors":"Muhammad Ariyon, N. Rita, T. Setiawan","doi":"10.5220/0009129401020108","DOIUrl":"https://doi.org/10.5220/0009129401020108","url":null,"abstract":": The wells of X fields are vertical wells with installed pumps being the Hydraulic Pumping Unit. The wells can still be optimized by improving the performance of N and SL by trial and error method. Based on optimation analysis result at well BM 1 by changing SPM and SL parameters on pump which installed with N 6 SPM and SL 100 inch got Qt equal to 144 bfpd, then converted to N 7 SPM and SL 100 inch so that there increase of Qt become equal to 199 bfpd And pump efficiency from 67% to 80%. While in the well BM 2 by changing the parameters of SPM and SL on pumps installed with N 8 SPM and SL 100 inch obtained Qt of 284 bfpd, then converted to N 10 SPM and SL 110 inch so that there is an increase of Qt to equal to 583 bfpd pump efficiency of 65% to 90%. In the economic analysis with Production Sharing Contract system can be known with non-capital investment of MMUS $ 0.150, obtained NPV contractor MUS $ 451.07, IRR > MARR,POT < 1 year and DPI 4.00.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133367379","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009364503040310
Domingo Junior P. Ngipol, T. Palaoag
: Agriculture plays a vital role in providing employment, revenue and domestic product of farmers. In the Philippines, agriculture has a large share of employment and likewise with the population who depends on it. The increase of agricultural product and income is necessary for the growth of the country’s economic condition. Unfortunately, the insufficiency of technology and the use of traditional methods of farming along with the issues and challenges associated to crops farming greatly affects farmers which results to low yielding of crops. The integration of smart agriculture using the Internet of Things (IoT) is an absolute solution in modernizing the traditional methods of agriculture. This simplifies farming techniques and improves time efficiency, water and fertilizer management, crop monitoring, soil and security management. This paper proposes an IoT framework that address the current issues and challenges associated to high valued crops farming in Alfonso Lista, Ifugao. It integrates two main functions including environment data sensing by a wide variety of sensors and environment factors control with some mechanics driven by smart actuators. This sensors and actuators are used for real-time monitoring, analysis and collection of information about the farm conditions like weather, moisture, temperature, humidity, fertility of soil and level of water. Essential data were gather by means of observation and in-depth interview with Ifugao farmers and employees of Yao Jia Xi Corporation – Alfonso Lista, Ifugao. The developed framework provides holistic foundation in the development of IoT-driven system for high valued crops farming with low cost and easy implementation.
{"title":"Designing an IoT Framework for High Valued Crops Farming","authors":"Domingo Junior P. Ngipol, T. Palaoag","doi":"10.5220/0009364503040310","DOIUrl":"https://doi.org/10.5220/0009364503040310","url":null,"abstract":": Agriculture plays a vital role in providing employment, revenue and domestic product of farmers. In the Philippines, agriculture has a large share of employment and likewise with the population who depends on it. The increase of agricultural product and income is necessary for the growth of the country’s economic condition. Unfortunately, the insufficiency of technology and the use of traditional methods of farming along with the issues and challenges associated to crops farming greatly affects farmers which results to low yielding of crops. The integration of smart agriculture using the Internet of Things (IoT) is an absolute solution in modernizing the traditional methods of agriculture. This simplifies farming techniques and improves time efficiency, water and fertilizer management, crop monitoring, soil and security management. This paper proposes an IoT framework that address the current issues and challenges associated to high valued crops farming in Alfonso Lista, Ifugao. It integrates two main functions including environment data sensing by a wide variety of sensors and environment factors control with some mechanics driven by smart actuators. This sensors and actuators are used for real-time monitoring, analysis and collection of information about the farm conditions like weather, moisture, temperature, humidity, fertility of soil and level of water. Essential data were gather by means of observation and in-depth interview with Ifugao farmers and employees of Yao Jia Xi Corporation – Alfonso Lista, Ifugao. The developed framework provides holistic foundation in the development of IoT-driven system for high valued crops farming with low cost and easy implementation.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126268234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009122100980101
Ause Labellapansa, Ana Yulianti, A. Yuliani
: Oil palm (Elaeis) is an industrial plant that produces large profits, especially in Indonesia. One of the factors that can affect the yield of this plant is destructive pests including Limacodidae and Psychidae. Delay in dealing with pest problems can cause poor results. This study uses the help of digital image processing to inentify two types of pests found on palm oil leaves of pests. Segmentation will be carried out to determine the characteristics of Limacodidae and Psychidae pests. The image processing method used is the zoning feature ecstasy. It is expected that knowing the types of pests suffered by oil palm trees can accelerate the recovery of oil palm trees so as to produce good quality of fruit.
{"title":"Segmentation of Palm Oil Leaf Disease using Zoning Feature Extraction","authors":"Ause Labellapansa, Ana Yulianti, A. Yuliani","doi":"10.5220/0009122100980101","DOIUrl":"https://doi.org/10.5220/0009122100980101","url":null,"abstract":": Oil palm (Elaeis) is an industrial plant that produces large profits, especially in Indonesia. One of the factors that can affect the yield of this plant is destructive pests including Limacodidae and Psychidae. Delay in dealing with pest problems can cause poor results. This study uses the help of digital image processing to inentify two types of pests found on palm oil leaves of pests. Segmentation will be carried out to determine the characteristics of Limacodidae and Psychidae pests. The image processing method used is the zoning feature ecstasy. It is expected that knowing the types of pests suffered by oil palm trees can accelerate the recovery of oil palm trees so as to produce good quality of fruit.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121841509","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 1900-01-01DOI: 10.5220/0009158402190228
M. Jannah, D. B. E. Putra, F. Syarif, Joni Tripardi, Nopiyanto, H. Kausarian
: Davit Kecil’s weir is an irrigation area that located in Ulu Maras Village, East Jemaja District, Kepulauan Anambas Regency, Kepulauan Riau Province. The needs of a geotechnical study are important to determine the soil properties and soil stability of the study area, those parameters will be used to identify the stability of the weir structure. Methods used are field study by taking soil samples and conduct laboratory analysis such as sieve analysis, hydrometer analysis, atterberg limits and direct shear stress that useful for soil resistance identification. Based on the laboratory test result, Hb.2 and Hb.3 are non- plastic soils with uniformity coefficient are 20.92 – 45.38 and coefficient of gradation is 6 – 15.68. So, the soils as categorized as very good on uniformity and good on gradation. The value of direct shear stress with cohesion (c) is 0.06 and φ obtained were in the range of 33.78 – 34.33. Soil grain size identified from sieve analysis is gravel-clay. Based on the analysis result, the stability of Davit Kecil’s weir that was observed from normal water condition and flood water condition is categorized into strong-safe weir characterized by sufficient eccentricity and bearing capacity control. In addition, the weir is withstand rolling and sliding failures.
{"title":"Geotechnics Analysis: Soil Hardness on Stability of Davit Kecil’s Weir in Ulu Maras, Kepulauan Anambas, Kepulauan Riau","authors":"M. Jannah, D. B. E. Putra, F. Syarif, Joni Tripardi, Nopiyanto, H. Kausarian","doi":"10.5220/0009158402190228","DOIUrl":"https://doi.org/10.5220/0009158402190228","url":null,"abstract":": Davit Kecil’s weir is an irrigation area that located in Ulu Maras Village, East Jemaja District, Kepulauan Anambas Regency, Kepulauan Riau Province. The needs of a geotechnical study are important to determine the soil properties and soil stability of the study area, those parameters will be used to identify the stability of the weir structure. Methods used are field study by taking soil samples and conduct laboratory analysis such as sieve analysis, hydrometer analysis, atterberg limits and direct shear stress that useful for soil resistance identification. Based on the laboratory test result, Hb.2 and Hb.3 are non- plastic soils with uniformity coefficient are 20.92 – 45.38 and coefficient of gradation is 6 – 15.68. So, the soils as categorized as very good on uniformity and good on gradation. The value of direct shear stress with cohesion (c) is 0.06 and φ obtained were in the range of 33.78 – 34.33. Soil grain size identified from sieve analysis is gravel-clay. Based on the analysis result, the stability of Davit Kecil’s weir that was observed from normal water condition and flood water condition is categorized into strong-safe weir characterized by sufficient eccentricity and bearing capacity control. In addition, the weir is withstand rolling and sliding failures.","PeriodicalId":382428,"journal":{"name":"Proceedings of the Second International Conference on Science, Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127644675","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：