Abstract X-ray computed tomography (CT) can reveal internal, three-dimensional details of objects in a non-destructive way and provide high-resolution, quantitative data in the form of CT numbers. The sensitivity of the CT number to changes in material density means that it may be used to identify lithology changes within cores of sedimentary rocks. The present pilot study confirms the use of Representative Elementary Volume (REV) to quantify inhomogeneity of CT densities of rock constituents of the Boda Claystone Formation. Thirty-two layers, 2 m core length, of this formation were studied. Based on the dominant rock-forming constituent, two rock types could be defined, i.e., clayey siltstone (20 layers) and fine siltstone (12 layers). Eleven of these layers (clayey siltstone and fine siltstone) showed sedimentary features such as, convolute laminations, desiccation cracks, cross-laminations and cracks. The application of the Autoregressive Integrated Moving Averages, Statistical Process Control (ARIMA SPC) method to define Representative Elementary Volume (REV) of CT densities (Hounsfield unit values) affirmed the following results: i) the highest REV values corresponded to the presence of sedimentary structures or high ratios of siltstone constituents (> 60%). ii) the REV average of the clayey siltstone was (5.86 cm3) and (6.54 cm3) of the fine siltstone. iii) normalised REV percentages of the clayey siltstone and fine siltstone, on the scale of the core volume studied were 19.88% and 22.84%; respectively. iv) whenever the corresponding layer did not reveal any sedimentary structure, the normalised REV values would be below 10%. The internal void space in layers with sedimentary features might explain the marked textural heterogeneity and elevated REV values. The drying process of the core sample might also have played a significant role in increasing erroneous pore proportions by volume reducation of clay minerals, particularly within sedimentary structures, where authigenic clay and carbonate cement were presumed to be dominant.
{"title":"Assessing the representative elementary volume of rock types by X-ray computed tomography (CT) – a simple approach to demonstrate the heterogeneity of the Boda Claystone Formation in Hungary","authors":"Saja Abutaha, J. Geiger, S. Gulyás, F. Fedor","doi":"10.2478/logos-2021-0018","DOIUrl":"https://doi.org/10.2478/logos-2021-0018","url":null,"abstract":"Abstract X-ray computed tomography (CT) can reveal internal, three-dimensional details of objects in a non-destructive way and provide high-resolution, quantitative data in the form of CT numbers. The sensitivity of the CT number to changes in material density means that it may be used to identify lithology changes within cores of sedimentary rocks. The present pilot study confirms the use of Representative Elementary Volume (REV) to quantify inhomogeneity of CT densities of rock constituents of the Boda Claystone Formation. Thirty-two layers, 2 m core length, of this formation were studied. Based on the dominant rock-forming constituent, two rock types could be defined, i.e., clayey siltstone (20 layers) and fine siltstone (12 layers). Eleven of these layers (clayey siltstone and fine siltstone) showed sedimentary features such as, convolute laminations, desiccation cracks, cross-laminations and cracks. The application of the Autoregressive Integrated Moving Averages, Statistical Process Control (ARIMA SPC) method to define Representative Elementary Volume (REV) of CT densities (Hounsfield unit values) affirmed the following results: i) the highest REV values corresponded to the presence of sedimentary structures or high ratios of siltstone constituents (> 60%). ii) the REV average of the clayey siltstone was (5.86 cm3) and (6.54 cm3) of the fine siltstone. iii) normalised REV percentages of the clayey siltstone and fine siltstone, on the scale of the core volume studied were 19.88% and 22.84%; respectively. iv) whenever the corresponding layer did not reveal any sedimentary structure, the normalised REV values would be below 10%. The internal void space in layers with sedimentary features might explain the marked textural heterogeneity and elevated REV values. The drying process of the core sample might also have played a significant role in increasing erroneous pore proportions by volume reducation of clay minerals, particularly within sedimentary structures, where authigenic clay and carbonate cement were presumed to be dominant.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"157 - 172"},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48836605","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Among sites of geomorphological interest in the tableland of the Stołowe Mountains, consisting of clastic sedimentary rocks of Late Cretaceous age, are enigmatic occurrences and clusters of sandstone boulders within plateau levels that are underlain by mudstones and marls. These boulders are allochthonous, having been derived from the quartz sandstone beds that support the upper plateau level and stratigraphically are in excess of 50 m above the altitudinal position of the boulders. Topographic conditions preclude long-distance transport from the escarpment slopes; boulders are hypothesised to be the last remnants of completely degraded outliers (mesas) of the upper plateau. Their present-day altitudinal position is explained by passive ‘settling’ following disintegration of caprock and denudation of the underlying weaker rocks. Two localities are here presented in detail, Łężyckie Skałki and Pustelnik, along with adjacent boulder trains in the valleys incised into the plateau. It is argued that both localities have considerable geoheritage value and both play the role of geosites, although on-site facilities are so far limited. However, the complex history of boulders sets a series of challenges for successful geo-interpretation.
{"title":"Enigmatic clusters of sandstone boulders on plateaus of the Stołowe Mountains (Sudetes, south-west Poland) – their geoheritage and geotouristic value","authors":"P. Migoń, K. Parzóch","doi":"10.2478/logos-2021-0017","DOIUrl":"https://doi.org/10.2478/logos-2021-0017","url":null,"abstract":"Abstract Among sites of geomorphological interest in the tableland of the Stołowe Mountains, consisting of clastic sedimentary rocks of Late Cretaceous age, are enigmatic occurrences and clusters of sandstone boulders within plateau levels that are underlain by mudstones and marls. These boulders are allochthonous, having been derived from the quartz sandstone beds that support the upper plateau level and stratigraphically are in excess of 50 m above the altitudinal position of the boulders. Topographic conditions preclude long-distance transport from the escarpment slopes; boulders are hypothesised to be the last remnants of completely degraded outliers (mesas) of the upper plateau. Their present-day altitudinal position is explained by passive ‘settling’ following disintegration of caprock and denudation of the underlying weaker rocks. Two localities are here presented in detail, Łężyckie Skałki and Pustelnik, along with adjacent boulder trains in the valleys incised into the plateau. It is argued that both localities have considerable geoheritage value and both play the role of geosites, although on-site facilities are so far limited. However, the complex history of boulders sets a series of challenges for successful geo-interpretation.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"141 - 155"},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47751992","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Science classes in public schools are usually strictly linked to several subjects and taught by reference to the reading-listening model. Non-formal educational institutions and events such as ‘children universities’ and science fairs (and to some degree also some private schools) implement elements of interdisciplinary teaching of science and learning through experiments and the use of scientific methods. Workshops conducted within non-formal educational structures prove that only is this method engaging and understandable to primary school pupils, it also is possibly much more effective than the traditional learning style for coding information and explaining common misconceptions in teaching evolution, palaeontology and biodiversity. The example of a scenario for science classes presented here (the so-called ‘aquatic problem’, i.e., adaptations of primarily terrestrial animals – amniotes – to the aquatic environment) uses simple props, such as everyday items, to address the problems that teachers in public school face. Thus, it can be implemented independently of school budgets and availability of school equipment.
{"title":"Teaching scientific method to primary school pupils by using the example of adaptation of secondarily aquatic animals to the marine environment","authors":"M. Antczak","doi":"10.2478/logos-2021-0020","DOIUrl":"https://doi.org/10.2478/logos-2021-0020","url":null,"abstract":"Abstract Science classes in public schools are usually strictly linked to several subjects and taught by reference to the reading-listening model. Non-formal educational institutions and events such as ‘children universities’ and science fairs (and to some degree also some private schools) implement elements of interdisciplinary teaching of science and learning through experiments and the use of scientific methods. Workshops conducted within non-formal educational structures prove that only is this method engaging and understandable to primary school pupils, it also is possibly much more effective than the traditional learning style for coding information and explaining common misconceptions in teaching evolution, palaeontology and biodiversity. The example of a scenario for science classes presented here (the so-called ‘aquatic problem’, i.e., adaptations of primarily terrestrial animals – amniotes – to the aquatic environment) uses simple props, such as everyday items, to address the problems that teachers in public school face. Thus, it can be implemented independently of school budgets and availability of school equipment.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"181 - 188"},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46864096","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Book Reviews: Baja California’s coastal landscapes revealed: excursions in geologic time and climate change, by Markes E. Johnson, 2021. The University of Arizona Press, Tucson, 237 pages. Paperback: price $22.95, ISBN 978-0-8165-4252-9.","authors":"D. Ruban","doi":"10.2478/logos-2021-0023","DOIUrl":"https://doi.org/10.2478/logos-2021-0023","url":null,"abstract":"","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"193 - 194"},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42778614","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Concentrations of suspended sediment transported by rivers are influenced by interactions between multiple drivers that act on a range of spatial and temporal scales. Such levels vary over the year, as well as across multi-year periods. Most conventional approaches to determining suspended load are based upon analyses of total suspended sediment concentration (SSC), i.e., the sum of mineral and organic matter. This approach makes it difficult, if not impossible, to determine the impact of multiple environmental factors on changes in suspension concentration precisely. The present paper focuses on the mineral and organic components of suspended sediment with the aim of determining how our knowledge of the share of each individual component can improve interpretations of SSC fluctuations during a hydro-logical year. The analysis conducted (personal and other researchers’ results) has shown that mineral and organic suspensions demonstrate mutually incompatible opposite trends under influence of environmental factors. This analysis of organic components identifies clear seasonal trends, which indicates that organic suspensions of autogenous origin have a strong influence on the dynamics of changes in suspension concentration; such analyses are rarely included in assessments of SSC dynamics.
{"title":"Suspended sediment in lowland rivers – towards identifying the ratios of mineral and organic components and their variation during the year","authors":"K. Skolasińska","doi":"10.2478/logos-2021-0019","DOIUrl":"https://doi.org/10.2478/logos-2021-0019","url":null,"abstract":"Abstract Concentrations of suspended sediment transported by rivers are influenced by interactions between multiple drivers that act on a range of spatial and temporal scales. Such levels vary over the year, as well as across multi-year periods. Most conventional approaches to determining suspended load are based upon analyses of total suspended sediment concentration (SSC), i.e., the sum of mineral and organic matter. This approach makes it difficult, if not impossible, to determine the impact of multiple environmental factors on changes in suspension concentration precisely. The present paper focuses on the mineral and organic components of suspended sediment with the aim of determining how our knowledge of the share of each individual component can improve interpretations of SSC fluctuations during a hydro-logical year. The analysis conducted (personal and other researchers’ results) has shown that mineral and organic suspensions demonstrate mutually incompatible opposite trends under influence of environmental factors. This analysis of organic components identifies clear seasonal trends, which indicates that organic suspensions of autogenous origin have a strong influence on the dynamics of changes in suspension concentration; such analyses are rarely included in assessments of SSC dynamics.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"173 - 180"},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45017706","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Authors of articles published in Geologos in 2021 – brief information","authors":"Editors of Geologos","doi":"10.2478/logos-2021-0024","DOIUrl":"https://doi.org/10.2478/logos-2021-0024","url":null,"abstract":"No abstract available.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"1 1","pages":""},"PeriodicalIF":1.0,"publicationDate":"2021-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42989441","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Abstract Sediment accumulation is a process that is typical of all types of water reservoirs. The rate and pattern of such accumulation are related to processes taking place in catchments that produce the sediments and to those within reservoirs that determine the percentage of the inflowing load that is trapped and where it is deposited. To keep reservoirs in working order requires desilting and managing of such bottom sediments once they are removed. The choice of strategy for sediment management depends on chemical and physical properties which result from both natural and anthropogenic processes. To varying degrees, these sediments may be contaminated with chemical compounds, especially trace metals. Therefore, research is needed in order to assess the quality of sediments, which will allow to opt for the proper management strategy. Based on an analysis of the available literature, the possibility of using sediments from reservoirs has been determined, using quality criteria and in accordance with applicable law and regulations.
{"title":"Methods of management of bottom sediments from selected water reservoirs – a literature review","authors":"Ilona Tomczyk-Wydrych, A. Świercz","doi":"10.2478/logos-2021-0013","DOIUrl":"https://doi.org/10.2478/logos-2021-0013","url":null,"abstract":"Abstract Sediment accumulation is a process that is typical of all types of water reservoirs. The rate and pattern of such accumulation are related to processes taking place in catchments that produce the sediments and to those within reservoirs that determine the percentage of the inflowing load that is trapped and where it is deposited. To keep reservoirs in working order requires desilting and managing of such bottom sediments once they are removed. The choice of strategy for sediment management depends on chemical and physical properties which result from both natural and anthropogenic processes. To varying degrees, these sediments may be contaminated with chemical compounds, especially trace metals. Therefore, research is needed in order to assess the quality of sediments, which will allow to opt for the proper management strategy. Based on an analysis of the available literature, the possibility of using sediments from reservoirs has been determined, using quality criteria and in accordance with applicable law and regulations.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"127 - 134"},"PeriodicalIF":1.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47545057","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Kholoud M. Abdel Maksoud, Mahmoud I. Baghdadi, D. Ruban
Abstract Caves are rare in northeast Africa and, thus, deserve attention as potential geoheritage objects (geosites). Assessment of Djara Cave and its vicinity (Western Desert, Egypt) has permitted to document unique features, such as the cave itself as a peculiar subsurface landform, speleothems providing data for palaeoenvironmental reconstructions, rock art demonstrating elements of past landscapes, siliceous nodules weathered from Eocene limestones and a network of dry drainage channels indicative of wetter palaeoenvironments. These features are assigned to geomorphological, sedimentological and palaeogeographical types of geoheritage. Djara Cave and its vicinity are proposed as a geosite of national rank; it is vulnerable to anthropogenic stress and needs geoconservation measures and instalment of interpretative signs. This geosite is already popular among tourists, and can be used for further tourism development. More generally, the presence of caves in Egyptian desert areas makes possible the recognition of national speleological heritage that requires special country-level strategies of management.
{"title":"Caves as geoheritage resource in remote desert areas: a preliminary evaluation of Djara Cave in the Western Desert of Egypt","authors":"Kholoud M. Abdel Maksoud, Mahmoud I. Baghdadi, D. Ruban","doi":"10.2478/logos-2021-0011","DOIUrl":"https://doi.org/10.2478/logos-2021-0011","url":null,"abstract":"Abstract Caves are rare in northeast Africa and, thus, deserve attention as potential geoheritage objects (geosites). Assessment of Djara Cave and its vicinity (Western Desert, Egypt) has permitted to document unique features, such as the cave itself as a peculiar subsurface landform, speleothems providing data for palaeoenvironmental reconstructions, rock art demonstrating elements of past landscapes, siliceous nodules weathered from Eocene limestones and a network of dry drainage channels indicative of wetter palaeoenvironments. These features are assigned to geomorphological, sedimentological and palaeogeographical types of geoheritage. Djara Cave and its vicinity are proposed as a geosite of national rank; it is vulnerable to anthropogenic stress and needs geoconservation measures and instalment of interpretative signs. This geosite is already popular among tourists, and can be used for further tourism development. More generally, the presence of caves in Egyptian desert areas makes possible the recognition of national speleological heritage that requires special country-level strategies of management.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"105 - 113"},"PeriodicalIF":1.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48488802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Merajuddin Khan, R. G. Khangar, N. Raychowdhury, Anand T. Babhare
Abstract Soft-sediment deformation structures play an important role in interpreting regional tectonics and basin evolution during slumping events. The Satpura Basin is interpreted as pull-apart with a monoclinal northerly palaeoslope throughout its evolution. The basin formed as a result of sinistral strike-slip faulting, induced by the ENE–WSW-trending Son-Narmada South fault in the north and the Tapti North fault in the south. We have analysed the slump folds within the basalmost Talchir Formation and related these to regional tectonics and palaeoslope changes in the Satpura Basin. The glaciofluvial strata of the Talchir Formation, exposed in the southern part of the Satpura Basin, record intricacies of folds created during slumping. Several fold styles can be distinguished, within alternations of competent sandstone and incompetent shale layers, some of which indicate buckling. Upright folds, resulting from pure shear, underwent rotation of their axial planes and fold axes during simple shear-dominated progressive deformation when the slump moved downslope. The soft-sediment deformation structures that we have studied show refolding patterns that closely resemble comparable folds known from lithified rocks. These layers with refolded structures are overlain by unde-formed sediments, which proves that they are the product of a single ongoing slumping process, rather than of successive deformation events. Our analysis of their fold axes and axial planes, together with fold vergences and thrust directions within the slumps, suggests a mean slumping direction towards the southwest. Analyses of slump folds and their relationship with regional tectonics have allowed us to reinterpret basin evolution history. The southwesterly trending palaeoslope of the basin suggest that the slope of the basin was not uniform throughout its evolution. At the opening, the oblique slip fault, which trended NE–SW, generated due to movement along the ENE–WSW basin bounding faults, was more active and triggered slumping event within the Talchir deposits in the basin. With progressive overlapping of the basin-bounding faults, the Satpura Basin gradually tilted towards the north.
{"title":"Slumping as a record of regional tectonics and palaeoslope changes in the Satpura Basin, central India","authors":"Merajuddin Khan, R. G. Khangar, N. Raychowdhury, Anand T. Babhare","doi":"10.2478/logos-2021-0010","DOIUrl":"https://doi.org/10.2478/logos-2021-0010","url":null,"abstract":"Abstract Soft-sediment deformation structures play an important role in interpreting regional tectonics and basin evolution during slumping events. The Satpura Basin is interpreted as pull-apart with a monoclinal northerly palaeoslope throughout its evolution. The basin formed as a result of sinistral strike-slip faulting, induced by the ENE–WSW-trending Son-Narmada South fault in the north and the Tapti North fault in the south. We have analysed the slump folds within the basalmost Talchir Formation and related these to regional tectonics and palaeoslope changes in the Satpura Basin. The glaciofluvial strata of the Talchir Formation, exposed in the southern part of the Satpura Basin, record intricacies of folds created during slumping. Several fold styles can be distinguished, within alternations of competent sandstone and incompetent shale layers, some of which indicate buckling. Upright folds, resulting from pure shear, underwent rotation of their axial planes and fold axes during simple shear-dominated progressive deformation when the slump moved downslope. The soft-sediment deformation structures that we have studied show refolding patterns that closely resemble comparable folds known from lithified rocks. These layers with refolded structures are overlain by unde-formed sediments, which proves that they are the product of a single ongoing slumping process, rather than of successive deformation events. Our analysis of their fold axes and axial planes, together with fold vergences and thrust directions within the slumps, suggests a mean slumping direction towards the southwest. Analyses of slump folds and their relationship with regional tectonics have allowed us to reinterpret basin evolution history. The southwesterly trending palaeoslope of the basin suggest that the slope of the basin was not uniform throughout its evolution. At the opening, the oblique slip fault, which trended NE–SW, generated due to movement along the ENE–WSW basin bounding faults, was more active and triggered slumping event within the Talchir deposits in the basin. With progressive overlapping of the basin-bounding faults, the Satpura Basin gradually tilted towards the north.","PeriodicalId":44833,"journal":{"name":"Geologos","volume":"27 1","pages":"93 - 103"},"PeriodicalIF":1.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44645159","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：