Brazilian Oral Research最新文献

The aim of this study was to evaluate the effect of different die materials used in the indirect resin composite restorative technique on the fracture resistance and failure mode of restored molars and compare it with the direct resin composite restorative technique. Two flexible die silicone materials for dental models (Die Silicone - Voco and Scan die - Yller) and a type IV dental stone material (Fujirock EP - GC) were evaluated. Sixty third molars were selected and divided into four groups: indirect resin composite restoration - Die silicone (IRCR-DS); indirect resin composite restoration - Scan die (IRCR-SD); indirect resin composite restoration - Fujirock EP (IRCR-FR), and direct resin composite restoration (DRCR). Class II MOD cavities were prepared with 5 mm of buccolingual width and depth. The specimens were restored and subjected to an axial compression load until fracture, and the data were analyzed by one-way ANOVA and Tukey's HSD test (α=.05). The fracture mode was classified into restorable and unrestorable fractures. Fracture resistance values were influenced by the die material used for the IRCR fabrication and by the restorative technique (p<.001). Fracture resistance mean values and standard deviation were: IRCR-DS: 1835.5 ± 324.0 A; IRCR-SD: 1732.5 ± 384.1 AB; IRCR-FR: 1419.3 ± 318.8 BC; and DRCR: 1100.6 ± 224.9 C. Restorable fracture was more prevalent. IRCR with flexible die casts promoted higher fracture resistance and lower prevalence of unrestorable fractures.

This study aims to reevaluate and compare the data from the Brazilian Unified Health System (SUS) on the number of diagnoses of systemic lupus erythematosus (SLE) in the pre-pandemic period with those in the pandemic period, as well as to compare the first year (2020) of the COVID-19 pandemic in Brazil with the last year (2021), to update the data, and to verify whether SLE disease control measures were effective in 2021. There was a consistent and significant increase in the incidence of SLE cases all over Brazil between the first and second pandemic years and between the pre-pandemic triennium and the second pandemic year. Therefore, it is inescapable to have larger clinical studies with different populations to better understand the relationship between these two conditions and find measures to improve the control of this disease.

This study aimed to assess the potential association between perception malocclusion and school performance in children and adolescents. An electronic search was performed in ten databases. Based on the PECO acronym (Population, Exposition, Comparator, and Outcome), the eligibility criteria included observational studies that compared the school performance of children and adolescents with and without the perception of malocclusion. There were no restrictions on the language or year of publication. Two reviewers selected the studies, extracted the data, and assessed the risk of bias by using the Joanna Briggs Institute tool for cross-sectional studies. School performance was measured by analyzing student grades; levels of absenteeism; and child or adolescent self-perception and/or the perception of parents, guardians, close friends, and teachers regarding the impact of malocclusion on school performance. The data were described narratively/descriptively. The search resulted in 3,581 registers, of which eight were included in the qualitative synthesis. These studies were published between 2007 and 2021. Two studies concluded that there was no significant association between school performance and perception of malocclusion, five studies found that only some of the children with malocclusion had their school performance affected, and one study concluded that there was a significant association between perception of malocclusion and low school performance. Considering all variables and the very low certainty of evidence, the perception of malocclusion seems to negatively impact school performance when associated with external and subjective factors. Further studies using additional measurement standards are required.

This study aimed to evaluate the association of pain-related disability with biopsychosocial factors in temporomandibular disorders (TMD) patients. The study was carried out at the Orofacial Pain Outpatient Clinic of the State University of Feira de Santana, Bahia, from September 2018 to March 2020. The sociodemographic aspects, TMD subtypes, presence of pain-induced disability, pressure pain threshold, perceived stress, anxiety, depression, and catastrophizing were evaluated in 61 patients. The studied variables were compared between patients with and without pain-induced disability. Crude and adjusted logistic regression were performed to obtain estimates of odds ratios (OR) and 95% confidence intervals. With the exception of catastrophizing, there was no association between the biopsychosocial factors and pain-induced disability. The presence of catastrophizing increased the chance of having chronic pain-induced disability by 4.02 times. The results of this study indicate a strong association between pain catastrophizing and disability in individuals with chronic painful TMD.

This study aimed to evaluate the effect of endodontic sealer (ES) on bond strength (BS) of prefabricated or milled-CAD-CAM (computer-aided design and computer-aided manufacturing) glass-fiber-posts (GFP). Canals of 90 single-rooted teeth were prepared for filling by the single-cone technique with gutta-percha and one of the following ES: AH Plus (epoxy resin), Endofill (zinc-oxide and eugenol), and Bio-C Sealer (calcium-silicate). After post-space preparation, tooth-specimens were equally divided in half according to type of GFP to be used. In the half to receive milled-CAD-CAM posts, tooth specimens were molded with acrylic resin to obtain replicas. These were scanned to enable the laboratory to produce the milled-CAD-CAM GFPs (Fiber CAD Lab, Angelus) by the subtractive technique. The other half of samples received prefabricated GFPs (Exacto, Angelus) (n=15). The GFPs were cemented with dual-cure resin cement (Panavia F2.0, Kuraray). Each root was sectioned into two slices per root region (cervical, middle, apical) that were subjected to the push-out BS test, in a universal testing machine. Failure mode (FM) was classified by scores. The BS data were submitted to generalized linear model analyses, while FM was analyzed using the chi-square test (a=0.05). BS showed no significant difference among the three ES (p > 0.05). BS was significantly higher for prefabricated (mean 10.84 MPa) versus milled-CAD-CAM GFPs (mean 6.94 MPa) (p <0.0001), irrespective of ES. The majority showed mixed failures. It could be concluded that type of ES did not affect BS of GFPs to dentin, and prefabricated-GFPs had higher bond-strength than customized-milled-CAD-CAM GFPs.

This study aimed to evaluate the influence of cleft width on dental arch symmetry of children with unilateral cleft lip and palate. Forty-one children were subjected to impression preoperatively (T1; mean age = 0.31 ± 0.07 years) and postoperatively (T2; mean age = 6 .73 ± 1.02 years). Eighty-two digitized dental casts were analyzed by stereophotogrammetry software. The cleft palate width was measured in the anterior (P-P'), middle (M-M'), and posterior (U-U') regions. Also, the following measurements were obtained: anterior intersegment (I-C') and intrasegment (I-C); total intersegment (I-T') and intrasegment (I-T); cleft-side (C'-T') and non-cleft-side (C-T) canine tuberosity. Paired t test and Pearson correlation coefficient were applied (α = 5%). Cleft width had the following means: 10.16 (± 3.46) mm for P-P', 12.45 (± 3.00) mm for M-M', and 12.57 (± 2.71) mm for U-U'. In the longitudinal analysis, I-C' had a significant reduction, while the other measurements significantly increased (p < 0.001). Asymmetry was verified in the following analyses at T1: I-C' vs. I-C and I-T' vs. I-T (p < 0.001); at T2, only in I-C' vs. I-C (p < 0.001). At T1, P-P' vs. I-C' (r = 0.722 and p < 0.001), P-P' vs. I-T' (r = 0.593 and p < 0.001), M-M' vs. I-C' (r = 0.620 and p < 0.001), and M-M' vs. I-T' (r = 0.327 and p < 0.05) showed a positive and significant correlation. At T2, there was a correlation between M-M' and I-C' (r = 0.377 and p < 0.05). In conclusion, the anterior and middle cleft widths influenced palatal asymmetry in the first months of life, while middle width influenced residual asymmetry.

This study evaluated the construct validity of the instrument Oral Health Literacy among diabetics. A probabilistic random sample of 239 diabetics from an infinite population answered the 10 items of the questionnaire. The structural validity was assessed by confirmatory factor analysis and goodness of fit, chi-square per degrees of freedom ratio (X2/df), comparative fit index (CFI), goodness-of-fit index (GFI), and root-mean-square error of approximation (RMSEA). Internal consistency was estimated by the average variance extracted (AVE) and composite reliability (CR). The scores were dichotomized with the upper limit of the 95% confidence interval as the cutoff point. The three-dimensional model presented good quality parameters (X2 /df = 2.459; CFI = 0.988; TLI = 0.981) and poor RMSEA (0.078). Internal consistency was adequate; AVE for the Access, Understand/appraise, and Apply subscales were 0.831, 0.981, and 0.954 and the CR for these subscales were 0.893, 0.962, and 0.822, respectively. Inadequate literacy ranged from 41.8 to 48.1%. The three-dimensional model identified (access, understand/appraise, and apply) showed structural validity, good internal consistency, and understandability.

The aim of this study was to describe the initial oral microbiota and how delivery mode and feeding practices impact its diversity in 0-2-month-old infants. This was a cross-sectional study that consisted of one collection of saliva samples from 0-2-month infants at baseline. Ten pairs of mothers and infants were selected. Medical health history, pregnancy, birth, feeding practices (breastfeeding or milk formula), and infant health status was obtained. Pooled microbial samples were obtained from the oral surfaces using a sterile cotton swab. Infants did not receive any breast milk before sampling. After collection, each swab was analyzed through microbiological culture-based procedures, using selective mediums. Cultures were analyzed for the presence of Streptococci, Lactobacillus, Staphylococcus, Enterobacterium , and Candida albicans . Twenty percent of the samples were serially diluted (10-2) to assess the number of bacteria expressed as CFU. Bacillota was the leading phylogenetic group in the infant's pooled microbial sample. The most prevalent genera were Streptococcus, Lactobacillus , and Staphylococcus . Two participants had a positive growth of Candida albicans . The association between genus group, type of delivery, and feeding practices was not statistically significant (p > 0.05). Lactobacillus genus was frequently present in the cesarean delivery group but with slightly higher counts in a vaginal delivery study subject. Exclusively breastfed infants showed presence of Streptococcus, Lactobacillus, Staphylococcus . The oral microbiome in infants (0-2 month-old) is highly heterogeneous and dynamic. Microbiota composition seems to be impacted by mode of delivery, with slight differences among groups. Breastmilk appears as an essential factor in maintaining the oral microbiome's stability and diversity.