Caroline Paris, Hadi Dib, Charf Eddine Bounoukta, E. Genty, C. Poupin, S. Siffert, R. Cousin
The proposed study is devoted to highlighting the importance of mixed oxides preparation through the layered double hydroxide route for undesirable gas pollutants abatement. Different series of Cu/Al/Ce mixed oxides with similar or different stoichiometrics were prepared and compared for toluene and/or CO oxidation. Catalyst synthesis methods influence material properties and activity for oxidation reactions. The high activity for the oxidation reactions of mixed oxides derived from LDH is explained by the Cu/Ce synergy. The presence of CO in the CO/toluene mixture does not affect the total toluene oxidation, and the toluene does not affect the total oxidation of CO conversion at low temperatures. The most effective catalytic material (Cu6Al1.2Ce0.8) presents a long lifetime stability for total toluene oxidation and resistance to CO poisoning in mixtures.
本研究旨在强调通过层状双氢氧化物路线制备混合氧化物对于减少不良气体污染物的重要性。研究人员制备了具有相似或不同化学计量学的不同系列 Cu/Al/Ce 混合氧化物，并对其在甲苯和/或 CO 氧化反应中的应用进行了比较。催化剂的合成方法会影响材料的性质和氧化反应的活性。由 LDH 制备的混合氧化物在氧化反应中的高活性得益于 Cu/Ce 的协同作用。一氧化碳/甲苯混合物中一氧化碳的存在不影响甲苯的总氧化，甲苯也不影响一氧化碳在低温下的总氧化转化。最有效的催化材料（Cu6Al1.2Ce0.8）在甲苯总氧化过程中具有较长的寿命稳定性，并能抵抗混合物中的 CO 中毒。
{"title":"Benefit of LDH-Derived Mixed Oxides for the Co-Oxidation of Toluene and CO Exhausted from Biomass Combustion","authors":"Caroline Paris, Hadi Dib, Charf Eddine Bounoukta, E. Genty, C. Poupin, S. Siffert, R. Cousin","doi":"10.3390/catal14070455","DOIUrl":"https://doi.org/10.3390/catal14070455","url":null,"abstract":"The proposed study is devoted to highlighting the importance of mixed oxides preparation through the layered double hydroxide route for undesirable gas pollutants abatement. Different series of Cu/Al/Ce mixed oxides with similar or different stoichiometrics were prepared and compared for toluene and/or CO oxidation. Catalyst synthesis methods influence material properties and activity for oxidation reactions. The high activity for the oxidation reactions of mixed oxides derived from LDH is explained by the Cu/Ce synergy. The presence of CO in the CO/toluene mixture does not affect the total toluene oxidation, and the toluene does not affect the total oxidation of CO conversion at low temperatures. The most effective catalytic material (Cu6Al1.2Ce0.8) presents a long lifetime stability for total toluene oxidation and resistance to CO poisoning in mixtures.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"1 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141641921","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
In this editorial, I would like to provide an overview of the eleven contributions to the Special Issue entitled “State of the Art in Molecular Catalysis in Europe”, which is part of the Organic and Polymer Chemistry Section of Catalysts [...]
{"title":"State of the Art in Molecular Catalysis in Europe","authors":"Carl Redshaw","doi":"10.3390/catal14070459","DOIUrl":"https://doi.org/10.3390/catal14070459","url":null,"abstract":"In this editorial, I would like to provide an overview of the eleven contributions to the Special Issue entitled “State of the Art in Molecular Catalysis in Europe”, which is part of the Organic and Polymer Chemistry Section of Catalysts [...]","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":" 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141832152","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jie Zeng, Xu-You Cao, Shi-Yin Xu, Yi-Feng Qiu, Jun-Ying Chen, Li-Ping Si, Hai Liu
The use of non–precious metals for electrocatalytic hydrogen reaction (HER) is particularly important for energy conservation and environmental protection. In this work, three new cobalt corroles containing o−, m−, and p−nitrobenzyl (1, 2, 3) at the meso 10−position of the corrole macrocycle were synthesized, and their electrocatalytic hydrogen evolution reaction in organic and neutral aqueous systems was also investigated. The results show that these three cobalt corroles have significant catalytic HER activity in both systems, and the catalytic efficiency follows 1 > 3 > 2, which indicates that the position of the nitro group can affect the catalytic property of the complexes. In the organic phase, when using trifluoroacetic acid or p−toluenesulfonic acid as the proton source, the electrocatalytic HER may undergo an EECC (E: electron transfer, C: proton coupling) pathway. In a neutral aqueous system, the HER turnover frequency value of 1 is up to 137.4 h−1 at 938 mV overpotential.
{"title":"Electrocatalytic Hydrogen Evolution Reaction of Cobalt Triaryl Corrole Bearing Nitro Group","authors":"Jie Zeng, Xu-You Cao, Shi-Yin Xu, Yi-Feng Qiu, Jun-Ying Chen, Li-Ping Si, Hai Liu","doi":"10.3390/catal14070454","DOIUrl":"https://doi.org/10.3390/catal14070454","url":null,"abstract":"The use of non–precious metals for electrocatalytic hydrogen reaction (HER) is particularly important for energy conservation and environmental protection. In this work, three new cobalt corroles containing o−, m−, and p−nitrobenzyl (1, 2, 3) at the meso 10−position of the corrole macrocycle were synthesized, and their electrocatalytic hydrogen evolution reaction in organic and neutral aqueous systems was also investigated. The results show that these three cobalt corroles have significant catalytic HER activity in both systems, and the catalytic efficiency follows 1 > 3 > 2, which indicates that the position of the nitro group can affect the catalytic property of the complexes. In the organic phase, when using trifluoroacetic acid or p−toluenesulfonic acid as the proton source, the electrocatalytic HER may undergo an EECC (E: electron transfer, C: proton coupling) pathway. In a neutral aqueous system, the HER turnover frequency value of 1 is up to 137.4 h−1 at 938 mV overpotential.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"48 13","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141644454","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The efficient detection of lead ions (Pb2⁺) is significant for environmental protection and public health. Electrochemical detection has emerged as one of the most promising technologies due to its low detection limits, high sensitivity, and cost-effectiveness. However, significant challenges remain, including issues related to sensitivity, selectivity, interference, and the stability of electrode materials. This review explores recent advancements in the field, focusing on integrating novel catalytic materials and innovative sensor construction methods. Particular emphasis is placed on enhancing the electrocatalytic redox processes on sensor surfaces using advanced nanomaterials such as MXenes, ferrite-based nanomaterials, carbon nanomaterials, and metal–organic frameworks (MOFs). Additionally, the role of biomaterials and enzymes in improving electrochemical sensors’ selectivity and anti-interference capabilities is discussed. Despite the impressive low detection limits achieved, real-world applications present additional challenges due to the complex composition of environmental samples. The review concludes with future perspectives on overcoming these challenges by leveraging the unique properties of catalytic materials to develop more effective and reliable electrochemical sensors for trace Pb2⁺ detection.
{"title":"Enhancing Trace Pb2⁺ Detection via Novel Functional Materials for Improved Electrocatalytic Redox Processes on Electrochemical Sensors: A Short Review","authors":"Duowen Yang, Xinyu Wang, Hao Xu","doi":"10.3390/catal14070451","DOIUrl":"https://doi.org/10.3390/catal14070451","url":null,"abstract":"The efficient detection of lead ions (Pb2⁺) is significant for environmental protection and public health. Electrochemical detection has emerged as one of the most promising technologies due to its low detection limits, high sensitivity, and cost-effectiveness. However, significant challenges remain, including issues related to sensitivity, selectivity, interference, and the stability of electrode materials. This review explores recent advancements in the field, focusing on integrating novel catalytic materials and innovative sensor construction methods. Particular emphasis is placed on enhancing the electrocatalytic redox processes on sensor surfaces using advanced nanomaterials such as MXenes, ferrite-based nanomaterials, carbon nanomaterials, and metal–organic frameworks (MOFs). Additionally, the role of biomaterials and enzymes in improving electrochemical sensors’ selectivity and anti-interference capabilities is discussed. Despite the impressive low detection limits achieved, real-world applications present additional challenges due to the complex composition of environmental samples. The review concludes with future perspectives on overcoming these challenges by leveraging the unique properties of catalytic materials to develop more effective and reliable electrochemical sensors for trace Pb2⁺ detection.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"34 3","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650346","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Binger Bai, Guanrong Cheng, Jian Chen, Xiaoping Chen, Qizhao Wang
With the abuse of antibiotics, its pollution poses an increasing threat to the environment and human health. Effective degradation of organic pollutants in water bodies is urgent. Compared to traditional treatment methods, advanced oxidation processes that have developed rapidly in recent years are more environmentally friendly, efficient and applicable to a wider range of organic compounds. FeWO4 was used in this study as the iron-based semiconductor material to modify and optimize the material design. Fe3O4/FeWO4 composites were prepared by a two-step hydrothermal method. The crystal structure, surface morphology, electrochemical properties and separability of the composite semiconductor were analyzed by XRD, XPS, UV-vis, SEM, EDS and Mott-Schottky. The results showed that, when the initial contaminant concentration was 30 mg/L, the initial solution pH was 4, the dosage of the catalyst was 25 mg and the dosage of hydrogen peroxide was 30 μL, the degradation efficiency of tetracycline hydrochloride (TCH) could reach 91% within 60 min, which was significantly improved compared to the performance of the single semiconductors Fe3O4 and FeWO4. In addition, the catalyst prepared in this experiment can be easily recovered by magnetic separation technology in practical application, which will not affect the turbidity of water while reducing the cost of catalyst separation and recovery.
{"title":"Strong Magnetic p-n Heterojunction Fe3O4-FeWO4 for Photo-Fenton Degradation of Tetracycline Hydrochloride","authors":"Binger Bai, Guanrong Cheng, Jian Chen, Xiaoping Chen, Qizhao Wang","doi":"10.3390/catal14070453","DOIUrl":"https://doi.org/10.3390/catal14070453","url":null,"abstract":"With the abuse of antibiotics, its pollution poses an increasing threat to the environment and human health. Effective degradation of organic pollutants in water bodies is urgent. Compared to traditional treatment methods, advanced oxidation processes that have developed rapidly in recent years are more environmentally friendly, efficient and applicable to a wider range of organic compounds. FeWO4 was used in this study as the iron-based semiconductor material to modify and optimize the material design. Fe3O4/FeWO4 composites were prepared by a two-step hydrothermal method. The crystal structure, surface morphology, electrochemical properties and separability of the composite semiconductor were analyzed by XRD, XPS, UV-vis, SEM, EDS and Mott-Schottky. The results showed that, when the initial contaminant concentration was 30 mg/L, the initial solution pH was 4, the dosage of the catalyst was 25 mg and the dosage of hydrogen peroxide was 30 μL, the degradation efficiency of tetracycline hydrochloride (TCH) could reach 91% within 60 min, which was significantly improved compared to the performance of the single semiconductors Fe3O4 and FeWO4. In addition, the catalyst prepared in this experiment can be easily recovered by magnetic separation technology in practical application, which will not affect the turbidity of water while reducing the cost of catalyst separation and recovery.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"1 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141649630","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The significance and challenges of hydrotreatment processes for vegetable oils have recently become apparent, encompassing various reactions like decarbonylation, decarboxylation, and hydrogenation. Heterogeneous noble or transition metal catalysts play a crucial role in these reactions, offering high selectivity in removing oxygen and yielding desired hydrocarbons. Notably, both sulphided and non-sulphided catalysts exhibit effectiveness, with the latter gaining attention due to health and toxicity concerns associated with sulphiding agents. Nickel-based catalysts, such as NiP and NiC, demonstrate specific properties and tendencies in deoxygenation reactions, while palladium supported on activated carbon catalysts shows superior activity in hydrodeoxygenation. Comparisons between the performances of different catalysts in various hydrotreatment processes underscore the need for tailored approaches. Transition metal phosphides (TMP) emerge as promising catalysts due to their cost-effectiveness and environmental friendliness. Ultimately, there is an ongoing pursuit of efficient catalysts and the importance of further advancements in catalysis for the future of vegetable oil hydrotreatment.
{"title":"Catalytic Applications in the Production of Hydrotreated Vegetable Oil (HVO) as a Renewable Fuel: A Review","authors":"Nur-Sultan Mussa, K. Toshtay, M. Capron","doi":"10.3390/catal14070452","DOIUrl":"https://doi.org/10.3390/catal14070452","url":null,"abstract":"The significance and challenges of hydrotreatment processes for vegetable oils have recently become apparent, encompassing various reactions like decarbonylation, decarboxylation, and hydrogenation. Heterogeneous noble or transition metal catalysts play a crucial role in these reactions, offering high selectivity in removing oxygen and yielding desired hydrocarbons. Notably, both sulphided and non-sulphided catalysts exhibit effectiveness, with the latter gaining attention due to health and toxicity concerns associated with sulphiding agents. Nickel-based catalysts, such as NiP and NiC, demonstrate specific properties and tendencies in deoxygenation reactions, while palladium supported on activated carbon catalysts shows superior activity in hydrodeoxygenation. Comparisons between the performances of different catalysts in various hydrotreatment processes underscore the need for tailored approaches. Transition metal phosphides (TMP) emerge as promising catalysts due to their cost-effectiveness and environmental friendliness. Ultimately, there is an ongoing pursuit of efficient catalysts and the importance of further advancements in catalysis for the future of vegetable oil hydrotreatment.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"51 49","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141650160","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This study aimed to explore the impact of varying amounts of added Au (0.5 to 2 wt.%) and the structural characteristics of anatase TiO2 supports (nanoparticles (TP, SBET = 88m2/g) and nanorods (TR, SBET = 105 m2/g)) on the catalytic efficiency of TiO2+Au catalysts in eliminating the herbicide glyphosate from aqueous solutions via the catalytic wet air oxidation (CWAO) process. The investigation was conducted using a continuous-flow trickle-bed reactor. Regardless of the TiO2 support and the amount of Au added, the addition of Au has a positive effect on the glyphosate degradation rate. Regarding the amount of Au added, the highest catalytic activity was observed with the TP + 1% Au catalyst, which had a higher Schottky barrier (SB) than the TP + 2% Au catalyst, which helped the charge carriers in the TiO2 conduction band to increase their reduction potential by preventing them from returning to the Au. The role of glyphosate degradation product adsorption on the catalyst surface is crucial for sustaining the long-term catalytic activity of the investigated TiO2+Au materials. This was particularly evident in the case of the TR + 1% Au catalyst, which had the highest glyphosate degradation rate at the beginning of the CWAO experiment, but its catalytic activity then decreased over time due to the adsorption of glyphosate degradation products, which was favoured by the presence of strong acidic sites. In addition, the TR + 1% Au solid had the smallest average Au particle size of all analyzed materials, which were more easily deactivated by the adsorption of glyphosate degradation products. The analysis of the degradation products of glyphosate shows that the oxidation of glyphosate in the liquid phase involves the rupture of C–P and C–N bonds, as amino-methyl-phosphonic acid (AMPA), glyoxylic acid and sarcosine were detected.
{"title":"The Influence of Au Loading and TiO2 Support on the Catalytic Wet Air Oxidation of Glyphosate over TiO2+Au Catalysts","authors":"G. Žerjav, Alen Albreht, Albin Pintar","doi":"10.3390/catal14070448","DOIUrl":"https://doi.org/10.3390/catal14070448","url":null,"abstract":"This study aimed to explore the impact of varying amounts of added Au (0.5 to 2 wt.%) and the structural characteristics of anatase TiO2 supports (nanoparticles (TP, SBET = 88m2/g) and nanorods (TR, SBET = 105 m2/g)) on the catalytic efficiency of TiO2+Au catalysts in eliminating the herbicide glyphosate from aqueous solutions via the catalytic wet air oxidation (CWAO) process. The investigation was conducted using a continuous-flow trickle-bed reactor. Regardless of the TiO2 support and the amount of Au added, the addition of Au has a positive effect on the glyphosate degradation rate. Regarding the amount of Au added, the highest catalytic activity was observed with the TP + 1% Au catalyst, which had a higher Schottky barrier (SB) than the TP + 2% Au catalyst, which helped the charge carriers in the TiO2 conduction band to increase their reduction potential by preventing them from returning to the Au. The role of glyphosate degradation product adsorption on the catalyst surface is crucial for sustaining the long-term catalytic activity of the investigated TiO2+Au materials. This was particularly evident in the case of the TR + 1% Au catalyst, which had the highest glyphosate degradation rate at the beginning of the CWAO experiment, but its catalytic activity then decreased over time due to the adsorption of glyphosate degradation products, which was favoured by the presence of strong acidic sites. In addition, the TR + 1% Au solid had the smallest average Au particle size of all analyzed materials, which were more easily deactivated by the adsorption of glyphosate degradation products. The analysis of the degradation products of glyphosate shows that the oxidation of glyphosate in the liquid phase involves the rupture of C–P and C–N bonds, as amino-methyl-phosphonic acid (AMPA), glyoxylic acid and sarcosine were detected.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"93 7","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141652621","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Muhammad Usman, M. Taj, A. Almasoudi, Doaa F. Baamer, Omar Makram Ali, Muhammad Imran Khan, I. Bibi, Mobeen Ur Rehman, R. Rasheed, A. Raheel, M. H. Lashari, Abdallah Shanableh, Javier Fernandez-Garcia
Water pollution has become a great challenge today. To address this problem regarding wastewater treatment by removing toxic synthetic dyes from wastewater, this research focused on the synthesis of a novel starch-modified NiCrMn-layered double hydroxide composite through the coprecipitation method and applied it as a photocatalyst for the degradation of reactive orange 13 dye. The synthesized photocatalyst was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), point of zero charges (PZC), dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Zeta potential techniques. These techniques revealed different characteristics of photocatalysts, like surface and structural properties. According to BET analysis, the final composite had 2.5 × 102 m2/g BET-specific surface area with a 45.56 nm pore radius value, and the overall composite found as mesoporous. Similarly, in DLS analysis, bare NiCrMn-LDH had 404 nm hydrodynamic size, which increased for the final starch composite up to 667 nm. Zeta potential value changed from −14.56 mV to 0.95 mV after the incorporation of starch with NiCrMn-LDH. They confirmed the incorporation of starch with trimetallic NiCrMn-layered double hydroxide (2:1:2). Starch association improved the properties of the photocatalyst like surface area. Different parameters like pH value, initial dye concentration, photocatalyst dose, hydrogen peroxide concentration, effect of sacrificial reagent, and effect of inorganic anions were studied for degradation of RO13. Overall, the photocatalysis process for RO13 followed pseudo-first-order kinetics. Photocatalytic degradation reactions for reactive orange 13 were conducted with an initial dye concentration of 10 mg/L, photocatalyst dosage of 20 mg/50 mL, and pH value at 3 in the presence of sunlight, resulting in an impressive degradation removal rate of 86.68%. This remarkable degradation ability of the photocatalyst for reactive orange 13 proves this composite was highly efficient.
{"title":"Novel Starch-Modified NiCrMn-LDH-Based Composite for Photocatalytic Degradation of Reactive Orange 13","authors":"Muhammad Usman, M. Taj, A. Almasoudi, Doaa F. Baamer, Omar Makram Ali, Muhammad Imran Khan, I. Bibi, Mobeen Ur Rehman, R. Rasheed, A. Raheel, M. H. Lashari, Abdallah Shanableh, Javier Fernandez-Garcia","doi":"10.3390/catal14070449","DOIUrl":"https://doi.org/10.3390/catal14070449","url":null,"abstract":"Water pollution has become a great challenge today. To address this problem regarding wastewater treatment by removing toxic synthetic dyes from wastewater, this research focused on the synthesis of a novel starch-modified NiCrMn-layered double hydroxide composite through the coprecipitation method and applied it as a photocatalyst for the degradation of reactive orange 13 dye. The synthesized photocatalyst was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), point of zero charges (PZC), dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and Zeta potential techniques. These techniques revealed different characteristics of photocatalysts, like surface and structural properties. According to BET analysis, the final composite had 2.5 × 102 m2/g BET-specific surface area with a 45.56 nm pore radius value, and the overall composite found as mesoporous. Similarly, in DLS analysis, bare NiCrMn-LDH had 404 nm hydrodynamic size, which increased for the final starch composite up to 667 nm. Zeta potential value changed from −14.56 mV to 0.95 mV after the incorporation of starch with NiCrMn-LDH. They confirmed the incorporation of starch with trimetallic NiCrMn-layered double hydroxide (2:1:2). Starch association improved the properties of the photocatalyst like surface area. Different parameters like pH value, initial dye concentration, photocatalyst dose, hydrogen peroxide concentration, effect of sacrificial reagent, and effect of inorganic anions were studied for degradation of RO13. Overall, the photocatalysis process for RO13 followed pseudo-first-order kinetics. Photocatalytic degradation reactions for reactive orange 13 were conducted with an initial dye concentration of 10 mg/L, photocatalyst dosage of 20 mg/50 mL, and pH value at 3 in the presence of sunlight, resulting in an impressive degradation removal rate of 86.68%. This remarkable degradation ability of the photocatalyst for reactive orange 13 proves this composite was highly efficient.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"39 5","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141652104","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This comprehensive review covers recent advancements in utilizing various types of polymers and their modifications as photocatalysts for the removal of pharmaceutical contaminants from water. It also considers polymers that enhance the photocatalytic properties of other materials, highlighting their dual role in improving water purification efficiency. Over the past decades, significant progress has been made in understanding the photocatalytic properties of polymers, including organic, inorganic, and composite materials, and their efficacy in degrading pharmaceuticals. Some of the most commonly used polymers, such as polyaniline, poly(p-phenylene vinylene), polyethylene oxide, and polypyrole, and their properties have been reviewed in detail. Physical modification techniques (mechanical blending and extrusion processing) and chemical modification techniques (nanocomposite formation, plasma modification techniques, surface functionalization, and cross-linking) have been discussed as appropriate for modifying polymers in order to increase their photocatalytic activity. This review examines the latest research findings, including the development of novel polymer-based photocatalysts and their application in the removal of pharmaceutical compounds, as well as optimization strategies for enhancing their performance. Additionally, challenges and future directions in this field are discussed to guide further research efforts.
{"title":"Photocatalytic Application of Polymers in Removing Pharmaceuticals from Water: A Comprehensive Review","authors":"S. Armaković, S. Armaković, Maria M. Savanović","doi":"10.3390/catal14070447","DOIUrl":"https://doi.org/10.3390/catal14070447","url":null,"abstract":"This comprehensive review covers recent advancements in utilizing various types of polymers and their modifications as photocatalysts for the removal of pharmaceutical contaminants from water. It also considers polymers that enhance the photocatalytic properties of other materials, highlighting their dual role in improving water purification efficiency. Over the past decades, significant progress has been made in understanding the photocatalytic properties of polymers, including organic, inorganic, and composite materials, and their efficacy in degrading pharmaceuticals. Some of the most commonly used polymers, such as polyaniline, poly(p-phenylene vinylene), polyethylene oxide, and polypyrole, and their properties have been reviewed in detail. Physical modification techniques (mechanical blending and extrusion processing) and chemical modification techniques (nanocomposite formation, plasma modification techniques, surface functionalization, and cross-linking) have been discussed as appropriate for modifying polymers in order to increase their photocatalytic activity. This review examines the latest research findings, including the development of novel polymer-based photocatalysts and their application in the removal of pharmaceutical compounds, as well as optimization strategies for enhancing their performance. Additionally, challenges and future directions in this field are discussed to guide further research efforts.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"9 2","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141655612","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The extensive use of plastics has led to a significant environmental threat due to the generation of waste plastic, which has shown significant challenges during recycling. The catalytic hydrocracking route, however, is viewed as a key strategy to manage this fossil-fuel-derived waste into plastic-derived fuels with lower carbon emissions. Despite numerous efforts to identify an effective bi-functional catalyst, especially metal-loaded zeolites, the high-performing zeolite for hydrocracking plastics has yet to be synthesized. This is due to the microporous nature of zeolite, which results in the diffusional limitations of bulkier polymer molecules entering the structure and reducing the overall cracking of plastic and catalyst cycle time. These constraints can be overcome by developing hierarchical zeolites that feature shorter diffusion paths and larger pore sizes, facilitating the movement of bulky polymer molecules. However, if the hierarchical modification process of zeolites is not controlled, it can lead to the synthesis of hierarchical zeolites with compromised functionality or structural integrity, resulting in reduced conversion for the hydrocracking of plastics. Therefore, we provide an overview of various methods for synthesizing hierarchical zeolites, emphasizing significant advancements over the past two decades in developing innovative strategies to introduce additional pore systems. However, the objective of this review is to study the various synthesis approaches based on their effectiveness while developing a clear link between the optimized preparation methods and the structure-activity relationship of the resulting hierarchical zeolites used for the hydrocracking of plastics.
{"title":"Advancing Plastic Recycling: A Review on the Synthesis and Applications of Hierarchical Zeolites in Waste Plastic Hydrocracking","authors":"Muhammad Usman Azam, Waheed Afzal, Inês Graça","doi":"10.3390/catal14070450","DOIUrl":"https://doi.org/10.3390/catal14070450","url":null,"abstract":"The extensive use of plastics has led to a significant environmental threat due to the generation of waste plastic, which has shown significant challenges during recycling. The catalytic hydrocracking route, however, is viewed as a key strategy to manage this fossil-fuel-derived waste into plastic-derived fuels with lower carbon emissions. Despite numerous efforts to identify an effective bi-functional catalyst, especially metal-loaded zeolites, the high-performing zeolite for hydrocracking plastics has yet to be synthesized. This is due to the microporous nature of zeolite, which results in the diffusional limitations of bulkier polymer molecules entering the structure and reducing the overall cracking of plastic and catalyst cycle time. These constraints can be overcome by developing hierarchical zeolites that feature shorter diffusion paths and larger pore sizes, facilitating the movement of bulky polymer molecules. However, if the hierarchical modification process of zeolites is not controlled, it can lead to the synthesis of hierarchical zeolites with compromised functionality or structural integrity, resulting in reduced conversion for the hydrocracking of plastics. Therefore, we provide an overview of various methods for synthesizing hierarchical zeolites, emphasizing significant advancements over the past two decades in developing innovative strategies to introduce additional pore systems. However, the objective of this review is to study the various synthesis approaches based on their effectiveness while developing a clear link between the optimized preparation methods and the structure-activity relationship of the resulting hierarchical zeolites used for the hydrocracking of plastics.","PeriodicalId":505577,"journal":{"name":"Catalysts","volume":"24 4","pages":""},"PeriodicalIF":0.0,"publicationDate":"2024-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"141654336","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：