Pub Date : 2022-03-01DOI: 10.12912/27197050/145320
Yurii Danuik, V. Sinchenko, Viktoriia Dryha, Vasyl Balan, L. Karpuk, O. Topchiy, Valerii Mykolaiko
The paper presents the research results of the survival rate of willow planting material depending on the storage methods and varietal peculiarities. The studies of the storage methods of planting material and their effect on the survival rate of cuttings and shoots were carried out in the years of 2019–2021 in the experimental field of the Institute of bio-energy crops and sugar beets, Ukraine. Two willow (Salix spp.) species: three-stamina variety Panfilivska and common willow variety Zbruch, were studied. Rot-affected cuttings and shoots as well as the number of the sprouted ones were monitored during the period of their placing in the storage till their planting in the field. It was found that both cuttings and shoots stored well in all treatments. During the storage, a small number of sprouted cuttings and disease affected ones were recorded. Rot-affected cuttings and shoots of both varieties were recorded only when they were stored in plastic bags both with and without lime treatment of incisions. Rotaffected planting material was not recorded when other storage methods were used. It was established that during the storage moisture losses in cuttings and shoots of both varieties were not seen on any record date and as far as the content of nutrition elements (NPK) is concerned, there was a decreasing tendency. It was found that the survival rate of planting material depended on both variety peculiarities and its species, and it was high even on the first record date. Common willow variety Zbruch had the highest percentage of survival rate of cuttings and shoots as compared with the three-stamina variety Panfilivska. All storage methods of cuttings and shoots at air temperature 3–5°C ensure their good shelf-life with small damages caused by disease and slight germination in some years. The survival rate of planting material depended on both varietal peculiarities and its species. The highest percentage of survival rate of cuttings and shoots was typical for common willow variety Zbruch as compared with three-stamina variety Panfilivska.
{"title":"Survival Rate of Willow Depending on the Storage Methods of Planting Material","authors":"Yurii Danuik, V. Sinchenko, Viktoriia Dryha, Vasyl Balan, L. Karpuk, O. Topchiy, Valerii Mykolaiko","doi":"10.12912/27197050/145320","DOIUrl":"https://doi.org/10.12912/27197050/145320","url":null,"abstract":"The paper presents the research results of the survival rate of willow planting material depending on the storage methods and varietal peculiarities. The studies of the storage methods of planting material and their effect on the survival rate of cuttings and shoots were carried out in the years of 2019–2021 in the experimental field of the Institute of bio-energy crops and sugar beets, Ukraine. Two willow (Salix spp.) species: three-stamina variety Panfilivska and common willow variety Zbruch, were studied. Rot-affected cuttings and shoots as well as the number of the sprouted ones were monitored during the period of their placing in the storage till their planting in the field. It was found that both cuttings and shoots stored well in all treatments. During the storage, a small number of sprouted cuttings and disease affected ones were recorded. Rot-affected cuttings and shoots of both varieties were recorded only when they were stored in plastic bags both with and without lime treatment of incisions. Rotaffected planting material was not recorded when other storage methods were used. It was established that during the storage moisture losses in cuttings and shoots of both varieties were not seen on any record date and as far as the content of nutrition elements (NPK) is concerned, there was a decreasing tendency. It was found that the survival rate of planting material depended on both variety peculiarities and its species, and it was high even on the first record date. Common willow variety Zbruch had the highest percentage of survival rate of cuttings and shoots as compared with the three-stamina variety Panfilivska. All storage methods of cuttings and shoots at air temperature 3–5°C ensure their good shelf-life with small damages caused by disease and slight germination in some years. The survival rate of planting material depended on both varietal peculiarities and its species. The highest percentage of survival rate of cuttings and shoots was typical for common willow variety Zbruch as compared with three-stamina variety Panfilivska.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47851332","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145201
Marianna Havryshko, O. Popovych, H. Yaremko, I. Tymchuk, M. Malovanyy
The food industry is one of the industrial activities that uses a large amount of water and the high content of dissolved organic matter and nitrogen in production effluents is their characteristic feature. The treatment technology of such industrial effluents is a combination of different technologies and treatment methods blocks depending on the parameters of wastewater. The choice of efficient, environmentally friendly and energy efficient biotechnology of wastewater treatment will allow its successful application in most food industries. Treated effluents can be considered as a source of water for watering plants in the area to reduce the overall use of water in the process, and as a prospect of returning to the overall process for use, for example, for washing vegetables and fruits. The physico-chemical parameters of industrial waters of food industry enterprises were analyzed and their impact on the environment was monitored. On the basis of the perspective technologies review of the food industry wastewater treatment the technological scheme for effective treatment of industrial wastewater was offered.
{"title":"Analysis of Prospective Technologies of Food Production Wastewater Treatment","authors":"Marianna Havryshko, O. Popovych, H. Yaremko, I. Tymchuk, M. Malovanyy","doi":"10.12912/27197050/145201","DOIUrl":"https://doi.org/10.12912/27197050/145201","url":null,"abstract":"The food industry is one of the industrial activities that uses a large amount of water and the high content of dissolved organic matter and nitrogen in production effluents is their characteristic feature. The treatment technology of such industrial effluents is a combination of different technologies and treatment methods blocks depending on the parameters of wastewater. The choice of efficient, environmentally friendly and energy efficient biotechnology of wastewater treatment will allow its successful application in most food industries. Treated effluents can be considered as a source of water for watering plants in the area to reduce the overall use of water in the process, and as a prospect of returning to the overall process for use, for example, for washing vegetables and fruits. The physico-chemical parameters of industrial waters of food industry enterprises were analyzed and their impact on the environment was monitored. On the basis of the perspective technologies review of the food industry wastewater treatment the technological scheme for effective treatment of industrial wastewater was offered.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43766488","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145584
P. Arunkumar, M. Ramaswamy, C. Sharmeela
Increasing greenhouse gases impose severe concern over the environment resulting in rising dangerous calamities of climate change in the form of floods, etc. Major disadvantages like intermittency of electric vehicles need to be charged after traveling fixed distance. The paper develops an algorithm for a selected industrial electric vehicle to be controlled at different speeds that envisages working on real time Internet of Things (IoT) based Global Positioning System (GPS) signals. It engages the ARM core based STM micro-controller in conjunction with mesh networked Bluetooth Low Energy (BLE) to govern the operations besides enabling it to be dynamically monitored. The system design considers the vehicle parameters that include the speed of vehicle and the engine, State of Charge (SoC) and State of Health (SoH) of battery together with real time GPS based navigation system using IoT bundled GPS based maps interface. The methodology involves a closed loop monitoring with specified sequence of steps that augur the system to operate at defined speed over designated work shifts and schedules. The procedure introduces an embedded C environment with a process of unit-testing based simulation to capture the merits of schema in terms of an improved vehicle performance under varying parametric conditions.
{"title":"Internet of Things Based Speed Control for an Industrial Electric Vehicle Using ARM Core","authors":"P. Arunkumar, M. Ramaswamy, C. Sharmeela","doi":"10.12912/27197050/145584","DOIUrl":"https://doi.org/10.12912/27197050/145584","url":null,"abstract":"Increasing greenhouse gases impose severe concern over the environment resulting in rising dangerous calamities of climate change in the form of floods, etc. Major disadvantages like intermittency of electric vehicles need to be charged after traveling fixed distance. The paper develops an algorithm for a selected industrial electric vehicle to be controlled at different speeds that envisages working on real time Internet of Things (IoT) based Global Positioning System (GPS) signals. It engages the ARM core based STM micro-controller in conjunction with mesh networked Bluetooth Low Energy (BLE) to govern the operations besides enabling it to be dynamically monitored. The system design considers the vehicle parameters that include the speed of vehicle and the engine, State of Charge (SoC) and State of Health (SoH) of battery together with real time GPS based navigation system using IoT bundled GPS based maps interface. The methodology involves a closed loop monitoring with specified sequence of steps that augur the system to operate at defined speed over designated work shifts and schedules. The procedure introduces an embedded C environment with a process of unit-testing based simulation to capture the merits of schema in terms of an improved vehicle performance under varying parametric conditions.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46207387","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145751
A. Olkova
The article describes an algorithm for selecting a targeted bioassay method. It was proposed to consider the most sensitive method to a certain contamination as the targeted method of bioassay. The selection was made from a “battery of bioassays”, which necessarily includes the D. magna mortality test. The rest of the methods for comparing sensitivity were selected situationally. The algorithm was tested on model samples. It was found that mortality tests for D. magna and C. affinis are the most sensitive to contamination with mineral nitrogen compounds. E. coli bioluminescence reduction test is preferred when there is contamination with Cu, phosphates and pyrophosphates. It was shown that the test to reduce the chemotactic reaction of P. caudatum should be used when the aquatic environment is polluted with Cd, Pb, Zn, oil products, organic herbicides imazethapyr and imazamox. The proposed algorithm is universal, but it should be applied when the priority pollutant is known, the effects of which prevail over the action of other compounds in the sample.
{"title":"Targeted Selecting of Bioassay Methods as an Alternative to the “Battery of Bioassays”","authors":"A. Olkova","doi":"10.12912/27197050/145751","DOIUrl":"https://doi.org/10.12912/27197050/145751","url":null,"abstract":"The article describes an algorithm for selecting a targeted bioassay method. It was proposed to consider the most sensitive method to a certain contamination as the targeted method of bioassay. The selection was made from a “battery of bioassays”, which necessarily includes the D. magna mortality test. The rest of the methods for comparing sensitivity were selected situationally. The algorithm was tested on model samples. It was found that mortality tests for D. magna and C. affinis are the most sensitive to contamination with mineral nitrogen compounds. E. coli bioluminescence reduction test is preferred when there is contamination with Cu, phosphates and pyrophosphates. It was shown that the test to reduce the chemotactic reaction of P. caudatum should be used when the aquatic environment is polluted with Cd, Pb, Zn, oil products, organic herbicides imazethapyr and imazamox. The proposed algorithm is universal, but it should be applied when the priority pollutant is known, the effects of which prevail over the action of other compounds in the sample.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47948855","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145962
Hiba Et-Tayeb, Khalid Ibno Namr, El Houssine El Mzouri, Bouchra El Bourhrami, R. Moussadek
Sustainable management of agricultural practices can improve soil organic status, soil quality (SQ), and yields. The study was conducted to test the impact of tillage (conventional (CT) and no-till (NT)), residues (vetch (C1) and uncover soil (C0)), and three nitrogen (N) fertilization rates (30, 60, and 90 N kg ha -1) on soil organic carbon (SOC), total nitrogen (N), C/N ratio, soft wheat yields and SQ. The experiment was established in 2010 in the Moroccan semi-arid. After ten years, the SOC concentration was greater under NT (9.4 g/kg) compared to CT (8.4 g/kg). Crop residues also enhanced SOC (10 g/kg) contrary to C0 (8.1 g/kg). Application of N fertilization showed profound effects on total N, increasing levels of N fertilization led to higher total N irrespective of tillage. Crop residues increased total N (0.6 g/kg) better than C0 plots at the horizon 20–40 cm. Soft wheat revealed an improvement under NT (4213.8 kg ha-1) versus CT (3785.6 kg ha-1) and it responded positively to the N application. For SQ evaluation through the indexing methods (SQI), principal component analysis was done for eight soil indicators to select the minimum data set (MDS), which were subsequently normalized and integrated into the SQI, additive (SQIANL), and weighted (SQIWNL). NT revealed higher scores (0.52; 0.6) than the CT (0.46; 0.53) for SQIANL and SQIWNL, respectively, at the horizon 0–20 cm. the residues layer on the soil surface improved SQIWNL score (0.59) compared to C0 (0.55). Moreover, the correlation (r) with yield and the sensitivity (S), allowed us to choose SQIWNL, as the best index (highest r and S) to evaluate SQ under different practices studied. Indeed, SQIWNL revealed an intermediate SQ under NT and at C1treatments, compared to CT and C0 (low SQ).
农业实践的可持续管理可以改善土壤有机状态、土壤质量和产量。本研究旨在测试耕作（常规（CT）和免耕（NT））、残留物（vetch（C1）和裸露土壤（C0））和三种氮（N）施肥量（30、60和90N kg ha-1）对土壤有机碳（SOC）、总氮（氮）、C/N比、软小麦产量和SQ的影响。该试验于2010年在摩洛哥半干旱地区建立。十年后，与CT（8.4 g/kg）相比，NT（9.4 g/kg）下的SOC浓度更高。与C0（8.1 g/kg）相反，作物残留物也提高了SOC（10 g/kg）。施用氮肥对总氮有显著影响，无论耕作方式如何，增加氮肥水平都会导致总氮增加。在20–40 cm的水平上，作物残留物比C0地块更好地增加了总氮（0.6 g/kg）。软小麦在NT（4213.8 kg ha-1）和CT（3785.6 kg ha-1。对于通过指数化方法（SQI）进行的SQ评估，对8个土壤指标进行了主成分分析，以选择最小数据集（MDS），随后将其归一化并整合到SQI、加性（SQIANL）和加权（SQIWNL）中。在0~20 cm范围内，NT显示SQIANL和SQIWNL的得分（0.52；0.6）分别高于CT（0.46；0.53）。与C0（0.55）相比，土壤表面的残留物层提高了SQIWNL得分（0.59）。此外，与产量和敏感性（S）的相关性（r）使我们能够选择SQIWNL作为评估不同实践下SQ的最佳指标（最高r和S）。事实上，与CT和C0（低SQ）相比，SQIWNL在NT和C1治疗下显示中等SQ。
{"title":"Tillage, Residues Management, and Nitrogen Fertilization Effects on Soil Organic Status, Soil Quality, and Soft Wheat in the Moroccan Semi-Arid","authors":"Hiba Et-Tayeb, Khalid Ibno Namr, El Houssine El Mzouri, Bouchra El Bourhrami, R. Moussadek","doi":"10.12912/27197050/145962","DOIUrl":"https://doi.org/10.12912/27197050/145962","url":null,"abstract":"Sustainable management of agricultural practices can improve soil organic status, soil quality (SQ), and yields. The study was conducted to test the impact of tillage (conventional (CT) and no-till (NT)), residues (vetch (C1) and uncover soil (C0)), and three nitrogen (N) fertilization rates (30, 60, and 90 N kg ha -1) on soil organic carbon (SOC), total nitrogen (N), C/N ratio, soft wheat yields and SQ. The experiment was established in 2010 in the Moroccan semi-arid. After ten years, the SOC concentration was greater under NT (9.4 g/kg) compared to CT (8.4 g/kg). Crop residues also enhanced SOC (10 g/kg) contrary to C0 (8.1 g/kg). Application of N fertilization showed profound effects on total N, increasing levels of N fertilization led to higher total N irrespective of tillage. Crop residues increased total N (0.6 g/kg) better than C0 plots at the horizon 20–40 cm. Soft wheat revealed an improvement under NT (4213.8 kg ha-1) versus CT (3785.6 kg ha-1) and it responded positively to the N application. For SQ evaluation through the indexing methods (SQI), principal component analysis was done for eight soil indicators to select the minimum data set (MDS), which were subsequently normalized and integrated into the SQI, additive (SQIANL), and weighted (SQIWNL). NT revealed higher scores (0.52; 0.6) than the CT (0.46; 0.53) for SQIANL and SQIWNL, respectively, at the horizon 0–20 cm. the residues layer on the soil surface improved SQIWNL score (0.59) compared to C0 (0.55). Moreover, the correlation (r) with yield and the sensitivity (S), allowed us to choose SQIWNL, as the best index (highest r and S) to evaluate SQ under different practices studied. Indeed, SQIWNL revealed an intermediate SQ under NT and at C1treatments, compared to CT and C0 (low SQ).","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45422621","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145131
M. Grynova, T. Safranov, A. Chugai, Roman Grynyov, I. Soloshych, R. Velychko
More than 80% of human diseases are related to the drinking water quality. In Ukraine, up to 80% of surface water bodies, according to official data, are unsuitable as sources of drinking water. A significant part of groundwater is supplied to consumers with significant deviations from quality standards. The urgency of the work is due to the need to assess the physiological value of the mineral composition of drinking water in some regions of Ukraine, in particular the content of fluoride in surface and groundwater sources. The paper evaluated the level of fluoride balance as a possible factor influencing the health of the population of certain regions of Ukraine. In Ukraine, there are four main geochemical regions in terms of fluoride content in drinking water (from very low concentrations of fluoride to high content). On the example of Odessa and Poltava regions, it was noted that the foci of endemic pathology are usually concentrated in the area of development of adverse natural or man-made processes. Both deficiency and excess of fluorides are important factors in shaping the health of the population, which determines the rationale for fluoridation or fluoridation of drinking water. Depending on the components of the environmental risk of high or low fluoride content, comprehensive caries and fluorosis prevention schemes were also recommended.
{"title":"Fluorides as an Indicator of Physiological Completeness of Mineral Composition of Drinking Waters of Separate Regions of Ukraine","authors":"M. Grynova, T. Safranov, A. Chugai, Roman Grynyov, I. Soloshych, R. Velychko","doi":"10.12912/27197050/145131","DOIUrl":"https://doi.org/10.12912/27197050/145131","url":null,"abstract":"More than 80% of human diseases are related to the drinking water quality. In Ukraine, up to 80% of surface water bodies, according to official data, are unsuitable as sources of drinking water. A significant part of groundwater is supplied to consumers with significant deviations from quality standards. The urgency of the work is due to the need to assess the physiological value of the mineral composition of drinking water in some regions of Ukraine, in particular the content of fluoride in surface and groundwater sources. The paper evaluated the level of fluoride balance as a possible factor influencing the health of the population of certain regions of Ukraine. In Ukraine, there are four main geochemical regions in terms of fluoride content in drinking water (from very low concentrations of fluoride to high content). On the example of Odessa and Poltava regions, it was noted that the foci of endemic pathology are usually concentrated in the area of development of adverse natural or man-made processes. Both deficiency and excess of fluorides are important factors in shaping the health of the population, which determines the rationale for fluoridation or fluoridation of drinking water. Depending on the components of the environmental risk of high or low fluoride content, comprehensive caries and fluorosis prevention schemes were also recommended.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43809803","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145825
W. K. Suryawan, Eva Nur Fauziah, I. Septiariva, Bimastyaji, Surya Ramadan, M. Sari, K. Ummatin, Jun-Wei Lim
Density and hardness are physical parameters in the manufacturing of refuse derived fuel (RDF) pellets. In making pellets, a high heating value for the combustion system is desired. This research aimed to analyze the mixture of municipal solid waste to its density and hardness and study its correlation to heating value. The variable used in this research is a mixture of paper waste and garden waste and food scraps and garden waste. The density and hardness for the mix of paper waste and garden waste were 1970.6 to 2474.8 kg/m3 and 37.8–42.8 HA, respectively. The mixture of food waste and garden waste has density and hardness of 1822 to 2276.7 kg/m3 and 17.4–37.8 HA. The correlation between density and hardness on heating values did not reach a significance of 0.05, so there was no strong relationship between density and hardness on heating values.
{"title":"Pelletizing of Various Municipal Solid Waste: Effect of Hardness and Density into Caloric Value","authors":"W. K. Suryawan, Eva Nur Fauziah, I. Septiariva, Bimastyaji, Surya Ramadan, M. Sari, K. Ummatin, Jun-Wei Lim","doi":"10.12912/27197050/145825","DOIUrl":"https://doi.org/10.12912/27197050/145825","url":null,"abstract":"Density and hardness are physical parameters in the manufacturing of refuse derived fuel (RDF) pellets. In making pellets, a high heating value for the combustion system is desired. This research aimed to analyze the mixture of municipal solid waste to its density and hardness and study its correlation to heating value. The variable used in this research is a mixture of paper waste and garden waste and food scraps and garden waste. The density and hardness for the mix of paper waste and garden waste were 1970.6 to 2474.8 kg/m3 and 37.8–42.8 HA, respectively. The mixture of food waste and garden waste has density and hardness of 1822 to 2276.7 kg/m3 and 17.4–37.8 HA. The correlation between density and hardness on heating values did not reach a significance of 0.05, so there was no strong relationship between density and hardness on heating values.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45596965","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/144825
O. Palamarchuk, H. Sakalova, T. Vasylinych, Lyudmila Lyubchak, O. Shevchuk, O. Matviichuk, Olena Khodanaitska
The article deals with the development of new eco-innovative technologies, evaluation of their effectiveness and raising the widest possible awareness of those categories to the people who could effectively use the proposed technologies. It was found that the personal position of economic entities is the core of the structural organization of psychological readiness for ecologically oriented innovation and is manifested in the forms of free ecologically oriented will. The paper discusses the main methods of removal of nutrients from wastewater, as well as presents promising technologies and techniques. It contains the recommendations for optimal conditions for the precipitation of ammonia nitrogen from an ion exchange regenerator for further use as an ammonium fertilizer. The maximum efficiency of ammonium nitrogen removal was established. According to the results of the best options, the deposition of real ion exchange concentrates was carried out. The humidity level was set during the drying of mineral fertilizers. The moisture content determined the content of sediment, which is close to the number of water molecules to the formula of the fertilizer MgNH4PO4 ∙ 5H2O. Complex phosphate fertilizer struvite was characterized. A comparative agronomic evaluation of synthetic struvite was performed. The influence of struvite on the processes of germination of cultivated plants was carried out. The results show that the method of obtaining struvite does not significantly affect the processes of wheat germination, and the determining factor in the effectiveness of fertilizers is the method of its application and dosage.
{"title":"Usage of Worked Clay Absorbent as a Manifestation of an Ecologically Oriented Lifestyle","authors":"O. Palamarchuk, H. Sakalova, T. Vasylinych, Lyudmila Lyubchak, O. Shevchuk, O. Matviichuk, Olena Khodanaitska","doi":"10.12912/27197050/144825","DOIUrl":"https://doi.org/10.12912/27197050/144825","url":null,"abstract":"The article deals with the development of new eco-innovative technologies, evaluation of their effectiveness and raising the widest possible awareness of those categories to the people who could effectively use the proposed technologies. It was found that the personal position of economic entities is the core of the structural organization of psychological readiness for ecologically oriented innovation and is manifested in the forms of free ecologically oriented will. The paper discusses the main methods of removal of nutrients from wastewater, as well as presents promising technologies and techniques. It contains the recommendations for optimal conditions for the precipitation of ammonia nitrogen from an ion exchange regenerator for further use as an ammonium fertilizer. The maximum efficiency of ammonium nitrogen removal was established. According to the results of the best options, the deposition of real ion exchange concentrates was carried out. The humidity level was set during the drying of mineral fertilizers. The moisture content determined the content of sediment, which is close to the number of water molecules to the formula of the fertilizer MgNH4PO4 ∙ 5H2O. Complex phosphate fertilizer struvite was characterized. A comparative agronomic evaluation of synthetic struvite was performed. The influence of struvite on the processes of germination of cultivated plants was carried out. The results show that the method of obtaining struvite does not significantly affect the processes of wheat germination, and the determining factor in the effectiveness of fertilizers is the method of its application and dosage.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45910674","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/144846
N. Lahboubi, F. Karouach, M. Bakraoui, Y. El Gnaoui, A. Essamri, Hassan El Bari
Anaerobic digestion of the date palm empty fruit bunch is a promising technology for both solid waste management and biogas production. The date palm empty fruit bunch is a lignocellulosic waste that takes more time for degradation and has a low biodegradability, thus pretreatment is needed to improve anaerobic biodegradation. In this study, the substrate was pretreated with different ratios of alkali-NaOH: 6, 18 and 30% (w/w) (ratio weight of NaOH / weight of Volatile Solid) for 10 min at room temperature to evaluate the effect of high alkali concentration on the methane potential and biodegradability. The experiment was conducted in a 5 L batch reactor under mesophilic conditions (37 °C). The methane potential of the untreated substrate was 98.5 N mL/gVS. The best methane potential improvement of 104% was achieved in the treatment of 18% (w/w) (204 N mL/gVS) with a biodegradability of 50%. Besides, two kinetic models were used to fit the experimental methane potentials and to explore process parameters (Modified Gompertz and Transference function). The best fit for predicting the parameters of methane production was observed for the 18% (w/w) pretreatment using the transference function, with a maximum methane production rate of 5 N mL/gVS.d.
{"title":"Effect of Alkali-NaOH Pretreatment on Methane Production from Anaerobic Digestion of Date Palm Waste","authors":"N. Lahboubi, F. Karouach, M. Bakraoui, Y. El Gnaoui, A. Essamri, Hassan El Bari","doi":"10.12912/27197050/144846","DOIUrl":"https://doi.org/10.12912/27197050/144846","url":null,"abstract":"Anaerobic digestion of the date palm empty fruit bunch is a promising technology for both solid waste management and biogas production. The date palm empty fruit bunch is a lignocellulosic waste that takes more time for degradation and has a low biodegradability, thus pretreatment is needed to improve anaerobic biodegradation. In this study, the substrate was pretreated with different ratios of alkali-NaOH: 6, 18 and 30% (w/w) (ratio weight of NaOH / weight of Volatile Solid) for 10 min at room temperature to evaluate the effect of high alkali concentration on the methane potential and biodegradability. The experiment was conducted in a 5 L batch reactor under mesophilic conditions (37 °C). The methane potential of the untreated substrate was 98.5 N mL/gVS. The best methane potential improvement of 104% was achieved in the treatment of 18% (w/w) (204 N mL/gVS) with a biodegradability of 50%. Besides, two kinetic models were used to fit the experimental methane potentials and to explore process parameters (Modified Gompertz and Transference function). The best fit for predicting the parameters of methane production was observed for the 18% (w/w) pretreatment using the transference function, with a maximum methane production rate of 5 N mL/gVS.d.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44541546","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-01DOI: 10.12912/27197050/145613
I. Kotsiuba, V. Lukianova, Y. Anpilova, T. Yelnikova, O. Herasymchuk, O. Spasichenko
The chemical and hydrobiological analyses of water quality of the Uzh river of Korosten district and the city of Korosten of the Zhytomyr region were conducted. The influence of anthropogenic loads on the river eutrophication processes was estimated. The peculiarities of the course of eutrophic processes in the reservoirs of the Uzh river basin within the Korosten district and the city of Korosten were established. As a result of research, it was found that the phytoplankton in the surface waters of the Uzh river of Korosten district was represented by diatoms, as well as green, blue-green, euglenophytic, golden and dinophytic algae. Periods of their intensive reproduction were revealed for all departments of algae. Seasonal fluctuations in the content of biogenic elements of phosphorus and nitrogen dissolved in oxygen water, as well as their influence on the development of certain departments of algae were revealed. Statistical modelling of the processes of development of blue-green, and green algae as well as diatoms in the river Uzh of Korosten district on the average values of their content for less than three years was conducted. Changes in the qualitative and quantitative composition of algae during the year were used to build the models. The obtained experimental data and their revealed features were generalized in the form of linear and nonlinear statistical mathematical models of eutrophication processes. The general appearances of the functions that describe these processes; numerical values of the coefficients of the function and graphs were constructed as well as modeling errors were defined.
{"title":"The Features of Eutrophication Processes in the Water of Uzh River","authors":"I. Kotsiuba, V. Lukianova, Y. Anpilova, T. Yelnikova, O. Herasymchuk, O. Spasichenko","doi":"10.12912/27197050/145613","DOIUrl":"https://doi.org/10.12912/27197050/145613","url":null,"abstract":"The chemical and hydrobiological analyses of water quality of the Uzh river of Korosten district and the city of Korosten of the Zhytomyr region were conducted. The influence of anthropogenic loads on the river eutrophication processes was estimated. The peculiarities of the course of eutrophic processes in the reservoirs of the Uzh river basin within the Korosten district and the city of Korosten were established. As a result of research, it was found that the phytoplankton in the surface waters of the Uzh river of Korosten district was represented by diatoms, as well as green, blue-green, euglenophytic, golden and dinophytic algae. Periods of their intensive reproduction were revealed for all departments of algae. Seasonal fluctuations in the content of biogenic elements of phosphorus and nitrogen dissolved in oxygen water, as well as their influence on the development of certain departments of algae were revealed. Statistical modelling of the processes of development of blue-green, and green algae as well as diatoms in the river Uzh of Korosten district on the average values of their content for less than three years was conducted. Changes in the qualitative and quantitative composition of algae during the year were used to build the models. The obtained experimental data and their revealed features were generalized in the form of linear and nonlinear statistical mathematical models of eutrophication processes. The general appearances of the functions that describe these processes; numerical values of the coefficients of the function and graphs were constructed as well as modeling errors were defined.","PeriodicalId":52648,"journal":{"name":"Ecological Engineering Environmental Technology","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2022-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48774424","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：