International Journal of Periodontics & Restorative Dentistry最新文献

The present study assessed the impact of a fixed prosthetic rehabilitation on masticatory function in patients diagnosed with stage IV periodontitis. Eligible participants were adults in need of complex rehabilitation due to masticatory dysfunction. Masticatory function was evaluated using the two-colored chewing gum mixing ability test (VOH) at the diagnostic phase (T0), 1 week after delivery of the prosthetic prototype (T1), and 1 week after delivery of the final prosthetic solution (T2). Ten subjects were treated with a fixed prosthesis following periodontal and implant surgery using an individualized, fully digital workflow. Full-mouth plaque and bleeding scores, pocket depth, and clinical attachment level improved significantly. VOH was 0.472 ± 0.168 at T0, 0.358 ± 0.166 at T1, and 0.250 ± 0.123 at T2. A significant improvement in VOH was observed from T0 to T1 (difference: -0.114; 95% CI: -0.199 to -0.029; P = .014) and from T1 to T2 (difference: -0.108; 95% CI: -0.200 to -0.015; P = .027). From T0 to T2, VOH increased by 44.3%. Self-perceived assessment of masticatory function also improved from T0 to T2 (P = .002). The fixed prosthetic rehabilitation in patients with stage IV periodontitis allowed for a significant improvement in objective and subjective measurements of masticatory function.

Traditional GBR procedures have been associated with frequent complications and compromised peri-implant esthetics. Tunneling techniques have been proposed as a promising alternative in this regard. More recently, a subperiosteal minimally invasive aesthetic ridge augmentation technique (SMART) was reported to have been clinically successful in a prospective case series. This technique includes the use of a bone graft/recombinant human platelet-derived growth factor-BB combination delivered to the site by a tunneling method. However, published histologic information regarding the nature of the regenerated tissue has been limited. The current study evaluated the histologic and histomorphometric findings of four human specimens harvested at 2, 5, 9, and 14 months after ridge augmentation using the SMART method. Evaluations of the wound healing and bone regeneration sequence over time found that the ridge augmentation was the result of extensive new bone formation that progressed through the woven bone to lamellar bone stages, with remodeling of the xenogeneic graft material and replacement by patient bone. This is the first study utilizing sequential human specimens to histologically examine the chronology of wound healing following alveolar ridge augmentation.

Mucogingival deformities around implants are frequent findings in clinical practice and often pre- sent as inadequate keratinized tissue and insufficient mucosal thickness. Phenotype modification therapy can increase peri-implant mucosal thickness and the amount of keratinized mucosa, im- proving the long-term clinical outcomes of implants. The free gingival graft (FGG) is considered the gold standard to increase keratinized mucosa; however, FGGs on the lingual aspects of implants are less predictable due to technique sensitivity and often present with insufficient gains in tissue thick- ness due to a limited blood supply. The semilunar lingualized apically positioned flap (SLAP) with subperiosteal tunnel connective tissue graft (CTG) can increase both peri-implant mucosal thick- ness and keratinized mucosal width circumferentially. SLAP consists of one full-thickness, semi- lunar incision within the keratinized mucosa and buccal to the implant, as well as two vertical re- leasing incisions mesial and distal to the implant, extending lingually into the alveolar mucosa. The tissue is apically positioned lingual to the implant and sutured in place, creating buccal space for a CTG via buccal subperiosteal tunneling. SLAP is a minimally invasive and predictable approach for improving the peri-implant mucosal phenotype. This case report demonstrates gains in peri-implant mucosal thickness and the amount of keratinized mucosa over a 10-month period utilizing SLAP with subepithelial CTG.

The ability for clinicians to adequately obtain primary stability in host bone is critical to the success of dental implants. Numerous conditions require dentists to perform multistage approaches to rebuild deficient bone volume prior to surgically placing implants. In many instances, implant placement cannot be achieved due to a lack of primary implant stability. Recently, a novel mineral-organic resorbable bone adhesive (MORBA) has demonstrated promising results in animal studies. MORBA is a synthetic, injectable, self-setting, load-bearing adhesive biomaterial that exhibits osteopromotive properties and bonds bone to bone and metal within 10 minutes and can fully resorb in 30 weeks. Its unique novel formulation was developed from biomimetic proteins found in marine animal creatures that possess distinct adhesive properties underwater. Excellent long-term results have shown its potential use for achieving primary stability in immediate implants. The present case report demonstrates the first use of MORBA in a human patient, utilized on a nonrestorable mandibular first molar. MORBA was utilized after placement of a mobile 5.8-mm implant to achieve stabilization. At 3 months postsurgery, both clinical and CBCT evaluations showed maintained implant stability. One year after implant placement, radiographic bone was seen on the buccal surface of the implant with continued long-term stabilization. This case report extends to 3 years whereby the use of MORBA, in an initially unstable situation, demonstrated an excellent long-term follow-up. MORBA provided immediate implant stability with resorbable characteristics, leading to successful long-term clinical outcomes up to 3 years. This innovative biomaterial offers a more efficient solution to a critical problem in implant dentistry, allowing optimal primary stability during immediate implant placement, thus reducing treatment times and costs.

This article defines immunophenotypes of stromal inflammatory and endothelial cells and fibroblasts 3 months after augmentation of the peri-implant soft tissue using a porcine cross-linked collagen matrix (VCMX). Peri-implant soft tissue samples were obtained from 12 patients at the lining mucosa (LM)-masticatory mucosa (MM) junction before (1) and 3 months after (2) augmentation. Immu- nohistochemical stains were performed to identify inflammatory cells (T [CD3] and B [CD20] lym- phocytes, plasma cells [CD138]), macrophages (CD68-proinflammatory, CD163-anti-inflammatory/ reparative), endothelial cells (CD31, CD34), and fibroblasts (CD90, TE-7). Differences in the mean positively stained cells pre- and postaugmentation were analyzed by Wilcoxon signed-rank test. CD31+ endothelial cells showed increased mean numbers in MM2 compared to MM1 (P = .025) and in LM2 compared to LM1 (P = .047). CD163+ anti-inflammatory macrophages showed higher mean numbers in MM2 than in MM1 (P = .021) and in LM2 than in LM1 (P = .012). All other cell phenotypes showed nonsignificant changes between pre- and postaugmentation. This molecular study provides novel insight on the frequency of stromal cell phenotypes in the wound healing process at 3 months postaugmentation with VCMX, with anti-inflammatory CD163+ macrophages being predominant. This should be further investigated to help find novel therapeutic approaches to modulate and promote the VCMX-related healing process.

Surgical treatment of infrabony defects may result in gingival recession of the neighboring teeth. The aim of this clinical report is to describe a surgical technique to promote gingival margin stability in the treatment of infrabony defects at sites with a thin or medium gingival phenotype. A coronally advanced entire papilla preservation (CA-EPP) flap with a connective tissue graft (CTG) was executed in two different clinical cases. This technique substantially improved interproximal clinical attachment level and pocket closure, with no gingival recession. A CA-EPP flap using a CTG may promote gingival margin stability and can be recommended in regenerative periodontal procedures.

The use of conventional scan bodies (SBs) with an intraoral scanner (IOS) to capture the position of a complete arch of dental implants has proven to be challenging. The literature is unclear about the accuracy of intraoral scanning techniques using SBs that are connected vertically to multiunit abutments (MUAs) for numerous adjacent implants in the same arch. Recently, there has been a paradigm shift from vertical SBs to horizontal SBs, which are positioned perpendicular to the long axis of the MUAs. Most IOSs available today can capture these horizontal SBs, called scan gauges (SGs), with better accuracy and consequently acquire the position of multiple adjacent implants using an effective scan path, thus reducing stitching and the number of images. The key to implementing this novel technology is to strategically arrange the SGs to optimize horizontal overlap of multiple adjacent SGs without touching each other. By superimposing two high-resolution intraoral scans of the SGs, an artificial intelligence (AI) algorithm is employed to produce a calibrated digital best-fit model on which a passive complete-arch prosthesis can be designed and fabricated. The advantages and disadvantages of SBs and SGs are discussed, and a case report using a digital workflow is presented.

Vertical ridge augmentation in the anterior mandible is a technically delicate procedure that requires knowledge of some anatomical structures to reduce intra- and postoperative complications. Proper soft tissue management is one of the primary aspects to the success of these techniques, enabling tension-free primary wound closure and preventing membrane exposure. This cadaveric and clinical study provides an anatomical overview of the lingual portion of the anterior mandible. Moreover, there is a description of a novel surgical approach for release of the lingual flap that will help clinicians achieve primary closure without incurring intrasurgical complications.

Implants with deficient papillae and black triangles are common findings. The treatment of these esthetic complications is considered to be challenging with limited predictability. Therefore, the present report aims to describe a novel technique for papilla augmentation: the 'iceberg' connective tissue graft (iCTG) after extraction and interproximal bone reconstruction in the anterior region. A 35-year-old patient presented with a hopeless tooth with interproximal clinical attachment loss extending to the apical third of the adjacent tooth. Interproximal bone reconstruction was performed through alveolar ridge preservation by directly applying recombinant human platelet-derived growth factor-BB (rhPDGF-BB) to the exposed root surface of the adjacent tooth. A mixture of autogenous bone chips (obtained from the ramus) and bovine bone xenograft particles (previously mixed with the growth factor) was also used. The patient was able to return for implant therapy only 2 years later, at which time an incomplete regeneration of the interproximal bone was observed. Therefore, to compensate the interproximal deficiency, the iCTG approach was utilized, involving a double layer of CTG with different origins. Two small grafts from the tuberosity were sutured to the mesial and distal ends of a wider CTG harvested from the palate, aiming to gain additional volume at the interproximal sites. The composite graft was then sutured on top of the implant platform, and the flap was then released and closed by primary intention. After conditioning the peri-implant tissues, the case was finalized with a satisfactory outcome. The described iCTG could be an effective approach for reconstructing peri-implant papillae following interproximal bone reconstruction.

Tooth autotransplantation is an effective treatment to replace missing teeth. Digital planning can facilitate successful autotransplantation. Guiding templates are highly recommended when performing cases in healed ridges in the posterior area to reduce excessive bone loss and increase the chances of fitting the donor tooth in the new socket. This case report highlights the use of 3D planning tools and fully guided drilling templates for successful tooth autotransplantation in the posterior area. Two tooth autotransplantations were performed in a 51-year-old patient using mandibular third molars to replace hopeless mandibular first and second molars. Root canal treatments were carried out before the surgeries, and different alveoloplasty techniques were used in each recipient area. The prosthetic phase was carried out after 9 months. Both teeth were asymptomatic, functional, and exhibited no signs of resorption or apical radiolucency and showed complete regeneration of the periodontal apparatus at the 2-year follow-up.