Biomagnetic Research and Technology最新文献

Background: We have developed magnetic cationic liposomes (MCLs) that contained magnetic nanoparticles as heating mediator for applying them to local hyperthermia. The heating performance of the MCLs is significantly affected by the property of the incorporated magnetite nanoparticles. We estimated heating capacity of magnetite nanoparticles by measuring its specific absorption rate (SAR) against irradiation of the alternating magnetic field (AMF).

Method: Magnetite nanoparticles which have various specific-surface-area (SSA) are dispersed in the sample tubes, subjected to various AMF and studied SAR.

Result: Heat generation of magnetite particles under variable AMF conditions was summarized by the SSA. There were two maximum SAR values locally between 12 m2/g to 190 m2/g of the SSA in all ranges of applied AMF frequency and those values increased followed by the intensity of AMF power. One of the maximum values was observed at approximately 90 m2/g of the SSA particles and the other was observed at approximately 120 m2/g of the SSA particles. A boundary value of the SAR for heat generation was observed around 110 m2/g of SSA particles and the effects of the AMF power were different on both hand. Smaller SSA particles showed strong correlation of the SAR value to the intensity of the AMF power though larger SSA particles showed weaker correlation.

Conclusion: Those results suggest that two maximum SAR value stand for the heating mechanism of magnetite nanoparticles represented by hysteresis loss and relaxation loss.

A series of experiments on rats have been performed, to study the effects of long time (50 days) exposure to electromagnetic fields of extremely low frequency (ELF, i.e. less than 100 Hz) and amplitude (non thermal), testing whether the metabolic processes would be affected. The background lies on recent observations on the behaviour of isolated enzymes in vitro exposed to EFL fields. In these experiments, the cyclotron (or Larmor) frequency of the metallic ion has been used to "stimulate" the metalloproteins redox-active site, thus obtaining a clear variation of the enzyme functionality. In this paper we have extended for the first time the check to more complex animal metabolism. The novelty of this approach implies that a large amount of data had to be analyzed since it was not possible, in principle, to select only a few parameters among all the potential effects. Several biochemical parameters have been evaluated by comparing their values during the periods of exposure (field ON) and non exposure (field OFF). The evidence that long term exposure to electromagnetic fields with a well defined frequency may have relevant effects on parameters such as body weight, blood glucose and fatty acid metabolism has been obtained.

Background: We have developed magnetite cationic liposomes (MCLs) and applied them as a mediator of local hyperthermia. MCLs can generate heat under an alternating magnetic field (AMF). In this study, the in vivo effect of hyperthermia mediated by MCLs was examined using 7,12-dimethylbenz(a)anthracene (DMBA)-induced rat mammary cancer as a spontaneous cancer model.

Method: MCLs were injected into the mammary cancer and then subjected to an AMF.

Results: Four rats in 20 developed mammary tumors at more than 1 site in the body. The first-developed tumor in each of these 4 rats was selected and heated to over 43 degrees C following administration of MCLs by an infusion pump. After a series of 3 hyperthermia treatments, treated tumors in 3 of the 4 rats were well controlled over a 30-day observation period. One of the 4 rats exhibited regrowth after 2 weeks. In this rat, there were 3 sites of tumor regrowth. Two of these regrowths were reduced in volume and regressed completely after 31 days, although the remaining one grew rapidly. These results indicated hyperthermia-induced immunological antitumor activity mediated by the MCLs.

Conclusion: Our results suggest that hyperthermic treatment using MCLs is effective in a spontaneous cancer model.

In the present work the results of the known investigation of the influence of combined static (40 microT) and alternating (amplitude of 40 nT) parallel magnetic fields on the current through the aqueous solution of glutamic acid, were successfully replicated. Fourteen experiments were carried out by the application of the combined magnetic fields to the solution placed into a Plexiglas reaction vessel at application of static voltage to golden electrodes placed into the solution. Six experiments were carried out by the application of the combined magnetic fields to the solution placed in a Plexiglas reaction vessel, without electrodes, within an electric field, generated by means of a capacitor at the voltage of 27 mV. The frequency of the alternating field was scanned within the bounds of 1.0 Hz including the cyclotron frequency corresponding to a glutamic acid ion and to the applied static magnetic field. In this study the prominent peaks with half-width of approximately 0.5 Hz and with different heights (till 80 nA) were registered at the alternating magnetic field frequency equal to the cyclotron frequency (4.2 Hz). The general reproducibility of the investigated effects was 70% among the all solutions studied by us and they arose usually after 40-60 min. after preparation of the solution. In some made-up solutions the appearance of instability in the registered current was noted in 30-45 min after the solution preparation. This instability endured for 20-40 min. At the end of such instability period the effects of combined fields action appeared practically every time. The possible mechanisms of revealed effects were discussed on the basis of modern quantum electrodynamics.

In this paper we studied the effects of external fields' polarization on the coupling of pure magnetic fields into human body. Finite Difference Time Domain (FDTD) method is used to calculate the current densities induced in a 1 cm resolution anatomically based model with proper tissue conductivities. Twenty different tissues have been considered in this investigation and scaled FDTD technique is used to convert the results of computer code run in 15 MHz to low frequencies which are encountered in the vicinity of industrial induction heating and melting devices. It has been found that external magnetic field's orientation due to human body has a pronounced impact on the level of induced currents in different body tissues. This may potentially help developing protecting strategies to mitigate the situations in which workers are exposed to high levels of external magnetic radiation.

The aim of this study was to prepare biodegradable sustained release magnetite microspheres sized between 1 to 2 microm. The microspheres with or without magnetic materials were prepared by a W/O/W double emulsion solvent evaporation technique using poly(lactide-co-glycolide) (PLGA) as the biodegradable matrix forming polymer. Effects of manufacturing and formulation variables on particle size were investigated with non-magnetic microspheres. Microsphere size could be controlled by modification of homogenization speed, PLGA concentration in the oil phase, oil phase volume, solvent composition, and polyvinyl alcohol (PVA) concentration in the outer water phase. Most influential were the agitation velocity and all parameters that influence the kinematic viscosity of oil and outer water phase, specifically the type and concentration of the oil phase. The magnetic component yielding homogeneous magnetic microspheres consisted of magnetite nanoparticles of 8 nm diameter stabilized with a polyethylene glycole/polyacrylic acid (PEG/PAA) coating and a saturation magnetization of 47.8 emu/g. Non-magnetic and magnetic microspheres had very similar size, morphology, and size distribution, as shown by scanning electron microscopy. The optimized conditions yielded microspheres with 13.7 weight% of magnetite and an average diameter of 1.37 microm. Such biodegradable magnetic microspheres seem appropriate for vascular administration followed by magnetic drug targeting.

Background: To quantitatively compare in-vitro and in vivo membrane transport studies of targeted delivery, one needs characterization of the magnetically-induced mobility of superparamagnetic iron oxide nanoparticles (SPION). Flux densities, gradients, and nanoparticle properties were measured in order to quantify the magnetic force on the SPION in both an artificial cochlear round window membrane (RWM) model and the guinea pig RWM.

Methods: Three-dimensional maps were created for flux density and magnetic gradient produced by a 24-well casing of 4.1 kilo-Gauss neodymium-iron-boron (NdFeB) disc magnets. The casing was used to pull SPION through a three-layer cell culture RWM model. Similar maps were created for a 4 inch (10.16 cm) cube 48 MGOe NdFeB magnet used to pull polymeric-nanoparticles through the RWM of anesthetized guinea pigs. Other parameters needed to compute magnetic force were nanoparticle and polymer properties, including average radius, density, magnetic susceptibility, and volume fraction of magnetite.

Results: A minimum force of 5.04 x 10(-16) N was determined to adequately pull nanoparticles through the in-vitro model. For the guinea pig RWM, the magnetic force on the polymeric nanoparticles was 9.69 x 10-20 N. Electron microscopy confirmed the movement of the particles through both RWM models.

Conclusion: As prospective carriers of therapeutic substances, polymers containing superparamagnetic iron oxide nanoparticles were succesfully pulled through the live RWM. The force required to achieve in vivo transport was significantly lower than that required to pull nanoparticles through the in-vitro RWM model. Indeed very little force was required to accomplish measurable delivery of polymeric-SPION composite nanoparticles across the RWM, suggesting that therapeutic delivery to the inner ear by SPION is feasible.

Background: High magnetic fields are becoming increasingly prevalent components of non-invasive, biomedical imaging tools (such as MRI), thus, an understanding of the molecular impacts associated with these field strengths in biological systems is of central importance. The biological impact of magnetic field strengths up to 30 Tesla were investigated in this study through the use of transgenic Arabidopsis plants engineered with a stress response gene consisting of the alcohol dehydrogenase (Adh) gene promoter driving the beta-glucuronidase (GUS) gene reporter.

Methods: Magnetic field induced Adh/GUS activity was evaluated with histochemical staining to assess tissue specific expression and distribution, and with quantitative, spectrofluometric assays to measure degree of activation. The evaluation of global changes in the Arabidopsis genome in response to exposure to high magnetic fields was facilitated with Affymetrix Gene Chip microarrays. Quantitative analyses of gene expression were performed with quantitative real-time polymerase-chain-reaction (qRT-PCR).

Results: Field strengths in excess of about 15 Tesla induce expression of the Adh/GUS transgene in the roots and leaves. From the microarray analyses that surveyed 8000 genes, 114 genes were differentially expressed to a degree greater than 2.5 fold over the control. These results were quantitatively corroborated by qRT-PCR examination of 4 of the 114 genes.

Conclusion: The data suggest that magnetic fields in excess of 15 Tesla have far-reaching effect on the genome. The wide-spread induction of stress-related genes and transcription factors, and a depression of genes associated with cell wall metabolism, are prominent examples. The roles of magnetic field orientation of macromolecules and magnetophoretic effects are discussed as possible factors that contribute to the mounting of this response.

Background: Magnetic Split-flow thin (SPLITT) fractionation is a newly developed technique for separating magnetically susceptible particles. Particles with different field-induced velocities can be separated into two fractions by adjusting applied magnetic forces and flow-rates at inlets and outlets.

Methods: Magnetic particles, Dynabeads, were used to test this new approach of field-induced velocity for susceptibility determination using magnetic SF at different magnetic field intensities. Reference measurements of magnetic susceptibility were made using a superconducting quantum interference device (SQUID) magnetometer. Various ion-labeled red blood cells (RBC) were used to study susceptibility determination and throughput parameters for analytical and preparative applications of magnetic SPLITT fractionation (SF), respectively. Throughputs were studied at different sample concentrations, magnetic field intensities, and channel flow-rates.

Results: The susceptibilities of Dynabeads determined by SPLITT fractionation (SF) were consistent with those of reference measurement using a superconducting quantum interference device (SQUID) magnetometer. Determined susceptibilities of ion-labeled RBC were consistent within 9.6% variations at two magnetic intensities and different flow-rates. The determined susceptibilities differed by 10% from referenced measurements. The minimum difference in magnetic susceptibility required for complete separation was about 5.0 x 10(-6) [cgs]. Sample recoveries were higher than 92%. The throughput of magnetic SF was approximately 1.8 g/h using our experimental setup.

Conclusion: Magnetic SF can provide simple and economical determination of particle susceptibility. This technique also has great potential for cell separation and related analysis. Continuous separations of ion-labeled RBC using magnetic SF were successful over 4 hours. The throughput was increased by 18 folds versus early study. Sample recoveries were 93.1 +/- 1.8% in triplicate experiments.

Background: In recent years the visualization of biomagnetic measurement data by so-called pseudo current density maps or Hosaka-Cohen (HC) transformations became popular.

Methods: The physical basis of these intuitive maps is clarified by means of analytically solvable problems.

Results: Examples in magnetocardiography, magnetoencephalography and magnetoneurography demonstrate the usefulness of this method.

Conclusion: Hardware realizations of the HC-transformation and some similar transformations are discussed which could advantageously support cross-platform comparability of biomagnetic measurements.