Brazilian dental journal最新文献

This study aimed to detect, quantify and compare the immunohistochemical expression of EGFR and VEGF and microvessel count (MVC) in oral lipomas, and to correlate the findings with clinical and morphological characteristics of the cases studied. The sample consisted of 54 oral lipomas (33 classic and 21 non-classic) and 23 normal adipose tissue specimens. Cytoplasmic and/or nuclear immunohistochemical staining of EGFR and VEGF was analyzed. The angiogenic index was determined by MVC. Cells were counted using the Image J® software. The Statistical Package for the Social Sciences was used for data analysis, adopting a level of significance of 5% for all statistical tests. A statistically significant difference in EGFR immunoexpression (p=0.047), especially, between classic lipomas and normal adipose tissue. There was a significant difference in MVC between non-classic lipomas and normal adipose tissue (p=0.022). In non-classic lipomas, only VEGF immunoexpression showed a significant moderate positive correlation (r=0.607, p=0.01) with MVC. In classic lipomas, the number of EGFR-immunostained adipocytes was directly proportional to the number of VEGF-positive cells, demonstrating a significant moderate positive correlation (r=0.566, p=0.005). The results suggest that EGFR, VEGF, and angiogenesis participate in the development of oral lipomas but are not primarily involved in the growth of these tumors.

The increase in life expectancy has led to a higher incidence of osteoporosis, characterized by an imbalance in bone remodeling. Several drugs are used for its treatment, but most promote undesirable side effects. The present investigation evaluated the effects of two low concentrations of grape seed extract (GSE) rich in proanthocyanidins on MC3T3-E1 osteoblastic cells. The cells were cultured in an osteogenic medium and divided into control (C), 0.1 µg/mL GSE (GSE0.1), and 1.0 µg/mL GSE (GSE1.0) groups to evaluate cell morphology, adhesion, and proliferation, in situ alkaline phosphatase (ALP) detection, mineralization and immunolocalization of osteopontin (OPN). The data obtained were analyzed by statistical tests for a significance of 5%. Cell morphology was maintained with both GSE concentrations, whereas cell adhesion significantly increased within three days in all groups. Cell proliferation increased significantly at seven days of culture, followed by a significant decrease in all experimental periods, with no statistical difference among them. In situ detection of ALP and mineralization increased with time, but within each period, no statistical differences among groups were observed. The expression of osteopontin was distributed regularly with more intensity after 24 hours in the GSE0.1 group. After three days, OPN expression was more intense in the control group, followed by GSE0.1 and GSE1.0 groups. Data obtained suggest that low concentrations of GSE do not affect the morphology and may stimulate the functional activity of osteoblastic cells.

This study compared the preparation of long oval-shaped root canals using WaveOne Gold and XP-endo Shaper systems, both supplemented or not with manual instrumentation. Twenty-four long oval-shaped canals of mandibular incisors were distributed into two groups according to the instrumentation: WaveOne Gold Primary or XP-endo Shaper systems. All root canals were manually instrumented with a size 25 K-file after automated preparation. The specimens were scanned by using a micro-CT device (17.42 µm) before and after automated preparation and manual instrumentation. The increased surface of the root canal and the percentage of untouched areas were assessed. Both WaveOne Gold and XP-endo Shaper systems increased the root canal surface and had similar untouched areas (p>0.05). Supplementary instrumentation increased the surface of the root canal and decreased the untouched walls (p<0.05). WaveOne Gold and XP-endo Shaper systems provided a similar preparation of long oval-shaped canals and manual instrumentation improved their preparation.

The present study evaluated the actual rotational speed of three different endodontic motors compared to the values provided by the manufacturers. A total of three endodontic motors (X-Smart Plus, VDW.Silver, and iRoot) were tested at 400 rpm and 800 rpm and 2 N/cm2 torque. The kinematics of the devices was recorded by using a custom angle-measuring disc with a 50-mm diameter attached to the handpiece provided by the manufacturer, whereas their movement was captured by a high-speed camera at 2,400 frames per second, 800 x 800 pixel-resolution and distance of 0.3 m from the target object. Statistical analysis was performed at a significance level of 5%. At 400 rpm, the iRoot motor had a value of 17.94 rpm above that indicated by the manufacturer, which was significantly different from those of X-Smart Plus (5.20 rpm below that indicated by the manufacturer) and VDW.Silver (0.62 rpm above that indicated by the manufacturer) motors (P < 0.05). At 800 rpm, the iRoot motor had a value of 51.34 rpm below that indicated by the manufacturer, whereas the X-Smart Plus motor had a value of 13.00 rpm below that indicated by the manufacturer (P > 0.05). The VDW.Silver motor statistically differed from the iRoot and X-Smart Plus ones, showing a value of 1.68 rpm above that indicated by the manufacturer. In conclusion, the X-Smart Plus, VDW.Silver, and iRoot motors showed lower variations in the rotational speed values compared to those reported by their manufacturers. The endodontic motors presented different behaviors between them, with the VDW.Silver motor presents the most accurate values and the iRoot presents the most divergent values.

This case series included a tomographic, microbiological, and histopathological description of 15 secondary apical periodontitis (SAP) lesions obtained by apical microsurgery performed in 10 patients to better understand the etiology and pathogenesis of SAP. Preoperative tomographic analyses were performed through Cone beam computerized tomography - Periapical index (CBCT-PAI), and apical microsurgeries were then carried out. The removed apices were used for microbial culturing and for molecular identification using PCR for the detection of 5 strict anaerobic bacteria (P. gingivalis, P. intermedia, P. nigrescens, T. forsythia, and T.denticola) and 3 viruses Herpes simplex viruses (HSV), Cytomegalovirus (CMG) and Epstein-Barr Virus (EBV) by nested PCR. The removed apical lesions were histologically described. Univariate statistical analyses were performed by using STATA MP/16 (StataCorp LLC, College Station, TX, United States). CBCT-PAI analyses revealed PAI 4 and PAI 5 score lesions that involved cortical plate destruction. Eight SAPs were positive by culture, while nine SAP lesions were positive by PCR. Fusobacterium species were the most frequently cultured organisms in 7 SAP lesions, followed by D. pneumosintes in 3. In contrast, by single PCR, T. forsythia and P. nigrescens were detected in 5 lesions, T. denticola in 4 lesions, and P. gingivalis in 2 lesions. Twelve periapical lesions were granulomas, and the remaining three SAP lesions were radicular cysts. In conclusion, this case series study revealed that secondary apical lesions presented tomographic involvement of PAI 3 to 5, and that most SAP lesions were apical granulomas containing anaerobic and facultative microorganisms.

The Patient Satisfaction Questionnaire (PSQ) is a self-administered instrument to assess adolescent patients' satisfaction with orthodontic treatment. A pre-existing North American instrument was further explored in the Netherlands. Semantic equivalence is part of cross-cultural adaptation and is necessary to achieve a valid and reliable instrument for a specific culture. The present study aimed to evaluate the semantic equivalence of the items, subscales, and overall PSQ between the original English version and the Brazilian Portuguese language version (B-PSQ). The PSQ has 58 items, distributed across 6 subscales: doctor-patient relationship, situational aspects of the clinic, dentofacial improvement, psychosocial improvement, dental function, and a residual category. Semantic equivalence was evaluated according to the following methods: (1) independent translations to Portuguese by two translators, both native in Brazilian Portuguese and fluent in English; (2) an expert committee drafted the first summarized version in Portuguese; (3) two independent back-translations into English by two native English-speaking translators fluent in Portuguese; (4) committee review; (5) committee drafted a summarized version of the back-translations; (6) expert committee drafted the second summarized version in Portuguese; (7) pre-test of the instrument using individual semi-structured interviews with 10 adolescents; (8) review and final version of the B-PSQ. Semantic equivalence between the original and the Brazilian versions of the questionnaire was achieved through diligent and rigorous methods, with effective translation and expert evaluations, incorporating the opinions of the target population.

This study evaluated the antimicrobial capacity of BlueM® mouthwash against the bacterium Streptococcus mutans and its influence on gbpA gene expression as well as its cytotoxic effect on fibroblast cells. BlueM® showed antimicrobial activity, with MIC and MBC values of 0.005% and 0.01%, respectively. The MBIC was 6.25% for S. mutans. CFU count and confocal microscopy revealed significant effect of BlueM® on S. mutans biofilm pre-formed on dentin surfaces. Interestingly, the analysis of gbpA gene expression indicated a decrease in gene expression after 15 min of treatment with BlueM® at a concentration of 25%. Moreover, BlueM® exhibited low levels of cytotoxicity. In conclusion, our results showed the antimicrobial effectiveness of BlueM® against S. mutans, its ability to modulate the expression of the gbpA gene and its low cytotoxicity. This study supports the therapeutic potential of BlueM® as an alternative agent for the control of oral biofilm.

This study aimed to investigate the failure behavior of 3 mol.% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) prosthetic crowns air-abraded with aluminum oxide (AO) particles of different sizes. Ninety ceramic premolar crowns were produced with 3Y-TZP frameworks veneered with porcelain. Crowns were randomly divided into three groups, according to the size of the air abrasion AO particles (n = 30): (GC) untreated (control); (G53) 53 µm; (G125) 125 µm. Air abrasion was performed with 0.25 mpa pressure, 10-mm distance, for 10 s. Crowns were adhesively cemented to dentin analog abutments. Specimens were loaded in compression to failure, in 37oC distilled water, using a universal testing machine (n = 30). Fractographic analysis was performed using a stereomicroscope and SEM. The roughness of the crown's inner surface was evaluated using an optical profilometer (n = 10). Fracture load data were statistically analyzed with Weibull analysis and roughness data with Kruskal-Wallis (α = 0.05). GC had the lowest characteristic fracture load (L0), while G53 and G125 had higher and statistically similar L0 values. The Weibull modulus (m) was similar among groups. The failure modes observed were catastrophic failure and porcelain chipping. There were no differences between the roughness parameters for the experimental groups (p > 0.05). The size of the AO particles did not affect the fracture load and failure mode of 3Y-TZP crowns. Air abrasion with 53 µm and 125 µm particles resulted in a higher fracture load of ceramic crowns than the untreated group while maintaining their reliability and surface characteristics.