Brazilian dental journal最新文献

This study aimed to evaluate the effect of different loading conditions on the mechanical behavior and stress distribution of a leucite-reinforced glass-ceramic. Plate-shaped ceramic specimens were obtained from leucite-reinforced glass-ceramic (1.5 × 8.4 × 8.3 mm) and adhesively cemented to a dentin analog substrate. Monotonic and cyclic contact fatigue tests were performed to simulate sphere-to-flat contact, using a 6 mm diameter spherical piston; and flat-to-flat contact, using a 3 mm diameter flat piston. For the monotonic test (n=20), a gradual compressive load (0.5 mm/min) was applied to the specimen using a universal testing machine. Failure load data were analyzed with Weibull statistics. The cyclic contact fatigue test was performed using protocols (load and a number of cycles) defined by the boundary technique (n=30). Fatigue data were analyzed using an inverse power law relationship and Weibull-lifetime distribution. The stress distribution was investigated using Finite Element Analysis (FEA). The monotonic and the fatigue Weibull modulus were similar among the two contact conditions. In fatigue, the slow crack growth exponent was greater for sphere-to-flat contact, which indicates that the load level had a greater effect on the specimen's probability of failure. In conclusion, FEA showed different stress distribution for the tested loading conditions. The stress distribution and probability of fatigue failure of specimens tested in sphere-to-flat contact showed greater dependency to load level.

This study aimed to evaluate the association of the variables age, gender, arch position, tooth length, root canal amplitude, and periapical lesion size with the occurrence of postoperative signs and symptoms (pain, tenderness, and edema) and the use of postoperative analgesics following root canal treatment with foraminal enlargement in single-rooted teeth with apical periodontitis. This prospective longitudinal study included 105 patients requiring root canal treatment of maxillary or mandibular single-rooted teeth with periapical lesion. After root canal treatment in a single session, pain intensity and tenderness were recorded daily for 7 days and on days 14 and 30. Edema was evaluated by two independent evaluators within 48 h, 72 h, and 7 days after treatment. Ordinal and logistic regressions were performed (p < 0.05). Female gender (beta = 1.02; p < 0.01), mandibular teeth (beta = 25.50; p < 0.01), medium root canal amplitude (beta = 0.93; p = 0.03), and edema (beta = 1.88; p < 0.01) were associated with increased postoperative pain and tenderness, while the use of analgesics (beta = -1.82; p < 0.01) and time in days (beta = -0.23; p < 0.01) were associated with a decrease in these signs and symptoms. Edema was considered a risk factor for analgesic requirement (Odds Ratio [OR] = 61.46; p < 0.01). Factors such as gender, arch position, and root canal amplitude were associated with postoperative signs and symptoms. The use of analgesics was more required in edema and was associated with decreased pain.

Thisstudy aimed to evaluate the effect of the electric current direction application on the resin composite-dentin bond strength using three adhesive systems. Human molar teeth were distributed according to the adhesive system (two-step self-etch - Clearfil SE Bond, Kuraray [CSE]; one-step self-etch - Single Bond Universal, 3M ESPE [SBU]; and two-step etch-and-rinse - Adper Single Bond 2, 3M ESPE [SB2]), electric current direction (without electric current - control, direct and reverse electric currents - 35µA), and storage time (24h - immediate and 6 months). Resin composite blocks (Filtek Z350XT, 3M ESPE) were bonded to dentin. The teeth/resin composites specimens were stored in distilled water at 37ºC for 24 hours and 6 months for the microtensile bond strength (µTBS) test (n = 10; ~12 sticks for each tooth). Failure patterns were analyzed on a stereomicroscope and classified as cohesive-dentin, cohesive-resin, adhesive or mixed. Adhesive penetration into dentin and hybrid layer formation were evaluated in a scanning electron microscope (n = 6). Data were submitted to a three-way ANOVA followed by Tukey's post hoc test (α = 0.05). There are no differences in µTBS when the adhesive systems were applied under direct and reverse electric currents, but both electric currents increased the µTBS for all adhesive systems. SBU showed the lowest µTBS values for control groups in both storage times and direct electric current in 6 months of storage. The adhesive failure pattern was more frequently observed in all groups. The electric current formed long resin tags for all adhesive systems. Storage for 6 months did not significantly decrease µTBS values. Both directions of electric current (positive and negative charges) at 35µA can increase the µTBS of the adhesive systems tested to dentin.

The biological behavior of lesions is highly dependent on the imbalance between their proliferative and apoptotic capacity. This study evaluated a correlation between the proliferative and apoptotic rates of different oral vascular anomalies (VAs) by analyzing the immunoexpression of proliferation (Ki-67) and apoptosis (Bcl-2 and Bax) markers in endothelial cells of 20 cases of GLUT-1 positive infantile hemangiomas (IHs), 20 cases of pyogenic granulomas (PGs) and 20 cases of vascular malformations (VMs). Immunoexpression analysis of Ki-67, Bcl-2 and Bax revealed a lower median percentage of positive cells in VMs cases compared to IHs and PGs cases (P <0.001). The Wilcoxon signed-rank test showed significantly higher percentages of immunostaining for Bax than for Bcl-2 in IHs (P = 0.048). In the group of PGs, a positive correlation was observed between the immunoexpressions of Ki-67 and Bax (r = 0.476; P = 0.034). Although oral IHs, PGs and VMs present similar clinical and histopathological features, each of these lesions has its etiopathogenic particularities. The results of this study suggest that different biological behaviors of VAs may be related to differences in the proliferative and apoptotic profiles of their endothelial cells.

Aim: To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material.

Methods: Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05).

Results: No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004).

Conclusion: Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

The aims of this clinical study were to evaluate the Color change - ΔE (based on spectrophotometry and visual analysis) and luminosity - L* (based on spectrophotometry) of dental enamel surface (after orthodontic treatment) around the area where orthodontic brackets were fixed, based on different cementing materials such as a resin (R group) and resin-modified glass ionomer cement (RMGIC group). The split-mouth study initially comprised 14 patients. Orthodontic brackets were fixed to the upper central incisors with resin or RMGIC. The color of the buccal surface of each tooth was measured through spectrophotometry and visual examination before the bracket-fixation process. Four individuals were excluded during the follow-up; thus 10 patients were evaluated (n=10). Brackets were removed after 12 months of orthodontic treatment, tooth color measurement and visual examination were performed again, and Adhesive Remaining Index (ARI) was also measured. ΔE and L* results were subjected to Student's t-test and by repeated-measures analysis of variance, respectively (α=0.05). ARI data were analyzed in percentages. There was statistically significant difference in ΔE between groups; the R group showed statistically higher values of L* after orthodontic treatment. ARI of 2 and 3 prevailed in the RMGIC group, whereas the R group presented 0 and 1. After orthodontic treatment, the RMGIC group presented smaller changes in ΔE, and the increase in the white scale was observed on the enamel surface around the area where brackets were fixed in the R group. The visual analysis did not show color change on the evaluated teeth.

Neem has been used as a medicine due to its beneficial properties such as anti-microbial effects. Neem products for oral application are on the rise. Before recommendation for therapeutic use in human, its effects on cellular activities need to be examined. Therefore, the aim of this study was to test the effects of the ethanolic neem crude extract on dental pulp cells and osteoblasts in terms of cell viability, mineralization, and gene expressions. The ethanolic neem extract derived from dry neem leaves was subjected to chemical identification using GC-MS. Human dental pulp stem cells (hDPSCs) and pre-osteoblasts (MC3T3) were treated with various concentrations of the neem crude extract. Cell viability, mineralization, and gene expressions were investigated by MTT assay, real-time PCR, and alizarin red S assay, respectively. Statistical analysis was performed by one-way ANOVA followed by Dunnett test. GC-MS detected several substance groups such as sesquiterpene. Low to moderate doses of the neem crude extract (4 - 16 µg/ml) did not affect hDPSC and MC3T3 viability, while 62.5 µg/ml of the neem extract decreased MC3T3 viability. High doses of the neem crude extract (250 - 1,000 µg/ml) significantly reduced viability of both cells. The neem crude extract at 1,000 µg/ml also decreased viability of differentiated hDPSC and MC3T3 and their mineralization. Furthermore, 4 µg/ml of neem inhibited viability of differentiated hDPSC. There is no statistical difference in gene expressions related to cell differentiation. In conclusion, the neem crude extract affected cell viability and mineralization. Cell viability altered differently depending on the doses, cell types, and cell stages. The neem crude extract did not affect cell differentiation. Screening of its effect in various aspects should be examined before the application for human use.

The purpose of this in vitro study was to evaluate the effect of gastric acid on the surface roughness and biofilm formation of bulk-fill composite resins. Twenty-seven samples of each composite resin were obtained: G1: Filtek Z250 XT (Z250), G2: Filtek Bulk Fill (FTK), G3: Tetric N-Ceram Bulk Fill (TTC), and G4: Aura Bulk Fill (AUR). The samples were quantitatively analyzed for surface roughness (Ra) using a roughness tester (n=15) and for biofilm formation (Cn) by the counting of colony-forming units (CFUs/mL) (n=9) in three different moments: after polishing (Ra0 and Cn0), after gastric acid immersion (Ra1 and Cn1), and after gastric acid and simulated tooth brushing (Ra2 and Cn2). Qualitative analysis through surface topography (n=3) was evaluated by scanning electron microscopy (SEM). Ra values were subjected to two-way repeated measures ANOVA, followed by Tukey's test. Cn values were subjected to Kruskal-Wallis analysis, followed by multiple comparisons analysis (α=0.05). Z250 and FTK showed significant increases in surface roughness at Ra1. There were fewer CFUs/mL on TTC and AUR in relation to those of Z250 and FTK for Cn0, Cn1 and Cn2. The SEM images showed that gastric acid increased the formation of cracks, exposure of fillers and micro cavities for all composite resins. After tooth brushing, the topographical changes were more evident but did not influence biofilm formation. The gastric acid promoted both degradation of the surfaces and bacterial adhesion for all composite resins.

This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

This double-blind, randomized clinical trial aimed to compare the clinical performance and clinical time to restore occluso-proximal cavities in primary molars withbulk-fillresin and conventional resin. A total of 140 class II restorations in primary molars of 65 participants (mean age of 6.7 + 1.5) were placed in two random groups:bulk-filland conventional resin. The restorations were evaluated using FDI criteria at the baseline, 6-month, and one year by a single calibrated examiner, and the clinical restorative time was measured with a digital timer. The success and survival of the restorations were evaluated with Kaplan-Meier graphs. The log-rank test compared the curves. Differences in restorative clinical time were compared using the Mann-Whitney U test. The level of significance was 5%. After one year, 115 restorations were evaluated. The success probability was 88.7% for Filtek Z350 XT and 85.9% for FiltekTM Bulk-fill, and for the survival probability, Filtek Z350 XT presented 90%, and FiltekTM Bulk-fill presented 93.7%. No significant difference was found between the success and survival curves (p=0.62), (p=0.51). The main reason for failure was marginal adaptation.Bulk-fillresin required 30% less time than the conventional resin (p<0.001).Bulk-fillresin presented similar clinical performance to the conventional resin and required less restorative clinical time. It is an option to restore class II lesions of primary molars.