Introduction: The COVID-19 outbreak since 2019 seriously affected both physical and mental health, making relief for long-term negative emotions a top priority. While dance behavior in physical education is known to alleviate negative emotions, few researchers explored its effect after sudden crises like COVID-19 and antecedents of sustained dance behavior, i.e., factors influencing dance self-efficacy under such specific conditions. This study conducts empirical research by distributing 307 questionnaires to dance school students from two universities in China and South Korea, aiming to address gaps in related fields and offer guidance to future researchers and practitioners.nnMethods: In this study, structural equation modeling was carried out using a questionnaire. Empirical data were collected separately from two universities in China and Korea to examine the relationship between the constructs. Theoretical framework construction utilized the stimulus-organism-response framework and social cognitive theory for an in-depth exploration of the psychological factors affecting dance self-efficacy and whether continuous dance behavior can alleviate negative emotions after a crisis.nnResults: The findings reveal that dance self-efficacy emerges as a crucial factor in sustaining individuals' ongoing dance intentions, with dance activities positively impacting mood improvement. Both mastery experience and vicarious experience significantly influence dance self-efficacy, albeit with differing effects. Mastery experience positively enhances dance self-efficacy, while vicarious experience has a negative impact. Augmented feedback also affects dance self-efficacy, though to a lesser extent compared to the former two factors. In contrast, physiological and affective states differ from those in other disciplines as common sources for evaluating dance self-efficacy. Moreover, environmental factors influence dance self-efficacy in the aftermath of a crisis or external stimulus. nnDiscussion: This study extends the stimulus-organism-response framework and social cognitive theory to the context of physical education. It aims to reveal the antecedents of dance self-efficacy behavior in physical education activities and explore whether persistent dance activities after a sudden crisis have a soothing effect on emotions. The research results enrich the relevant literature on dance education and provide theoretical support and management inspiration for those engaged in physical education activities.
{"title":"Examining the Impact of Continuous Dance on Emotions and Factors Influencing Dance Self-Efficacy","authors":"NA YU, LIU XIAOLEI","doi":"10.59671/lbnzk","DOIUrl":"https://doi.org/10.59671/lbnzk","url":null,"abstract":"Introduction: The COVID-19 outbreak since 2019 seriously affected both physical and mental health, making relief for long-term negative emotions a top priority. While dance behavior in physical education is known to alleviate negative emotions, few researchers explored its effect after sudden crises like COVID-19 and antecedents of sustained dance behavior, i.e., factors influencing dance self-efficacy under such specific conditions. This study conducts empirical research by distributing 307 questionnaires to dance school students from two universities in China and South Korea, aiming to address gaps in related fields and offer guidance to future researchers and practitioners.nnMethods: In this study, structural equation modeling was carried out using a questionnaire. Empirical data were collected separately from two universities in China and Korea to examine the relationship between the constructs. Theoretical framework construction utilized the stimulus-organism-response framework and social cognitive theory for an in-depth exploration of the psychological factors affecting dance self-efficacy and whether continuous dance behavior can alleviate negative emotions after a crisis.nnResults: The findings reveal that dance self-efficacy emerges as a crucial factor in sustaining individuals' ongoing dance intentions, with dance activities positively impacting mood improvement. Both mastery experience and vicarious experience significantly influence dance self-efficacy, albeit with differing effects. Mastery experience positively enhances dance self-efficacy, while vicarious experience has a negative impact. Augmented feedback also affects dance self-efficacy, though to a lesser extent compared to the former two factors. In contrast, physiological and affective states differ from those in other disciplines as common sources for evaluating dance self-efficacy. Moreover, environmental factors influence dance self-efficacy in the aftermath of a crisis or external stimulus. nnDiscussion: This study extends the stimulus-organism-response framework and social cognitive theory to the context of physical education. It aims to reveal the antecedents of dance self-efficacy behavior in physical education activities and explore whether persistent dance activities after a sudden crisis have a soothing effect on emotions. The research results enrich the relevant literature on dance education and provide theoretical support and management inspiration for those engaged in physical education activities.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135356766","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This study investigated the installation status of motors in a rubber product manufacturer’s factory A with high fire load and frequent fires and analyzed the fire. It aims to analyze the electrical and environmental characteristics of the process with the highest fire risk and suggest the fire risk and improvement measures. A total of 15,963 motors are installed and operating in the rubber product manufacturing factory A. We investigated 177 fire accidents that occurred for 19 years from 2002 to 2020 to analyze the installation environment of the motors in the curing and logistics processes, which are major fire risk locations and measure and analyze the temperature and the electrical signals such as current in the load/no-load, locked-rotor conditions due to trouble. The study found no particulars of the current and leakage current under the motor load and no load in the normal motor operating state. However, it confirmed the leakage current rapidly rose to a maximum of 897.8% due to the locked-rotor state in the trouble situation. It also confirmed that the motor temperature exceeded 40℃, the maximum temperature for environmental exposure, in the curing process exposed to a high temperature. The analysis of fires in the site showed the process accounted for the highest proportion of fires. This study is meaningful in that while existing studies were limited to locked-rotor state in the laboratory environment, it proved in an actual industrial site that the current increased more sharply as the motor status approached closer to the locked-rotor state.
{"title":"A study on fire risk according to the environment and load conditions of motors used in rubber product manufacturing factories","authors":"Jong-Chan Lee, Doo-Hyun Kim, Sung-Chul Kim","doi":"10.59671/gosyz","DOIUrl":"https://doi.org/10.59671/gosyz","url":null,"abstract":"This study investigated the installation status of motors in a rubber product manufacturer’s factory A with high fire load and frequent fires and analyzed the fire. It aims to analyze the electrical and environmental characteristics of the process with the highest fire risk and suggest the fire risk and improvement measures. A total of 15,963 motors are installed and operating in the rubber product manufacturing factory A. We investigated 177 fire accidents that occurred for 19 years from 2002 to 2020 to analyze the installation environment of the motors in the curing and logistics processes, which are major fire risk locations and measure and analyze the temperature and the electrical signals such as current in the load/no-load, locked-rotor conditions due to trouble. The study found no particulars of the current and leakage current under the motor load and no load in the normal motor operating state. However, it confirmed the leakage current rapidly rose to a maximum of 897.8% due to the locked-rotor state in the trouble situation. It also confirmed that the motor temperature exceeded 40℃, the maximum temperature for environmental exposure, in the curing process exposed to a high temperature. The analysis of fires in the site showed the process accounted for the highest proportion of fires. This study is meaningful in that while existing studies were limited to locked-rotor state in the laboratory environment, it proved in an actual industrial site that the current increased more sharply as the motor status approached closer to the locked-rotor state.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135102919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Lucelly de las M Benítez Ch, Julia S Vidal A, Luz A Cogollo C, Johafanna E, Romero J, Maria N Pertuz S, Milena P Medrano S
Low birth weight (<2500 g) is one of the most important indicators to monitor progress in maternal, perinatal and child health. Materials and methods: Descriptive, analytical- correlational study with a quantitative approach. 1410 cases of newborns with low birth weight, reported in the Public Health Epidemiological Surveillance System (SIVIGILA) of the Department of Health Development, in the department of Córdoba, Colombia, were analyzed. For the analysis, the R statistical package and frequency tables were used. Results: 35% of the mothers were between the ages of 17-21 and 55% of them reside in municipal capitals. 92% had various trades as their occupation, 82% belong to stratum 1, 2% integrate the migrant population and 66% have a secondary educational level. On the other hand, 47% of the children reached 37 weeks of gestation and 94% of them were classified as low birth weight. Discussion: These results agree with those of other authors who determined that socioeconomic factors influence low birth weight. Conclusions: The sociodemographic characteristics of the mother are determining factors for low birth weight.
{"title":"Epidemiological profile of low birth weight, department of Córdoba, Colombia, 2020-2021","authors":"Lucelly de las M Benítez Ch, Julia S Vidal A, Luz A Cogollo C, Johafanna E, Romero J, Maria N Pertuz S, Milena P Medrano S","doi":"10.59671/lomeitn","DOIUrl":"https://doi.org/10.59671/lomeitn","url":null,"abstract":"Low birth weight (<2500 g) is one of the most important indicators to monitor progress in maternal, perinatal and child health. Materials and methods: Descriptive, analytical- correlational study with a quantitative approach. 1410 cases of newborns with low birth weight, reported in the Public Health Epidemiological Surveillance System (SIVIGILA) of the Department of Health Development, in the department of Córdoba, Colombia, were analyzed. For the analysis, the R statistical package and frequency tables were used. Results: 35% of the mothers were between the ages of 17-21 and 55% of them reside in municipal capitals. 92% had various trades as their occupation, 82% belong to stratum 1, 2% integrate the migrant population and 66% have a secondary educational level. On the other hand, 47% of the children reached 37 weeks of gestation and 94% of them were classified as low birth weight. Discussion: These results agree with those of other authors who determined that socioeconomic factors influence low birth weight. Conclusions: The sociodemographic characteristics of the mother are determining factors for low birth weight.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135106052","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Machining technologies are being adapted worldwide to the applications of new materials, but there are qualitative changes here, which are caused by further developments in the field of new cutting tools.nThe article deals with the economic efficiency of the production of mechanical components for machine tools and CNC machines. The economic aspects of optimizing the production of components are currently a very topical topic. Reducing production costs is currently a much-discussed topic. The term "machinability of materials" is a set of properties of the material being machined, which we monitor from the point of view of its suitability for production with a certain method of machining. When optimizing cutting conditions and tool life, it is necessary to use a certain optimization criterion within certain limiting conditions. The limitations are given by the technical parameters of the machine, the tool, the machined material and the required quality of the machined surface. The main economic criterion is the amount of production costs.
{"title":"Mechanical components for machine tools and their economic efficiency","authors":"Darina Matiskova, Jozef Tkac","doi":"10.59671/gssxp","DOIUrl":"https://doi.org/10.59671/gssxp","url":null,"abstract":"Machining technologies are being adapted worldwide to the applications of new materials, but there are qualitative changes here, which are caused by further developments in the field of new cutting tools.nThe article deals with the economic efficiency of the production of mechanical components for machine tools and CNC machines. The economic aspects of optimizing the production of components are currently a very topical topic. Reducing production costs is currently a much-discussed topic. The term \"machinability of materials\" is a set of properties of the material being machined, which we monitor from the point of view of its suitability for production with a certain method of machining. When optimizing cutting conditions and tool life, it is necessary to use a certain optimization criterion within certain limiting conditions. The limitations are given by the technical parameters of the machine, the tool, the machined material and the required quality of the machined surface. The main economic criterion is the amount of production costs.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135106169","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
An investigation of the decomposition of the polynomial of the form (N(p))/(D(p)) into partial fractions is conducted in this article. Two approaches to the decomposition of the fraction are outlined, to enhance the teaching of the concept to students. Many Calculus textbooks give common rules for the decomposition of (N(p))/(D(p)) into Partial Fractions. The rule that if the denominator D(p)=〖(p〗^2-a^2)(bp^2+cp+d), for bp^2+cp+d an irreducible quadratic expression, and that the degree of the numerator N is less than that of the denominator D, that is, deg(N)
{"title":"Investigation of Rules for Decomposition of the Polynomial of the Form (N(p))/(D(p)) into Partial Fractions.","authors":"Dr RK Mahlobo","doi":"10.59671/wnzkd","DOIUrl":"https://doi.org/10.59671/wnzkd","url":null,"abstract":"An investigation of the decomposition of the polynomial of the form (N(p))/(D(p)) into partial fractions is conducted in this article. Two approaches to the decomposition of the fraction are outlined, to enhance the teaching of the concept to students. Many Calculus textbooks give common rules for the decomposition of (N(p))/(D(p)) into Partial Fractions. The rule that if the denominator D(p)=〖(p〗^2-a^2)(bp^2+cp+d), for bp^2+cp+d an irreducible quadratic expression, and that the degree of the numerator N is less than that of the denominator D, that is, deg(N)","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135595261","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wade Allison, Honorary Professor at Oxford University in the United Kingdom, claimed to be willing to drink 'Japan’s Fukushima treated water' in quantities greater than 1 litre. However, even if we assume it is treated water, it is not certain that drinking it would result in radiation exposure, but rather it might cause stomach discomfort. The definition of contaminated water can be described as "water in a state where it is polluted or contains radioactive substances." On the other hand, treated water refers to water that has undergone specified water treatment in response to natural water sources. Fukushima effluents is only pre-treatment as ALPS process, so it is inadequate to simply call it treated water. In other hand, Korea’s Hanbit nuclear power plant discharged extremely warm effluent from cooling sea water in its plant condenser into the sea, which not only prevents fish from being caught in the nearby waters but also prevents the cultivation of seaweed. Currently, neighboring countries of Japan are relying on unscientific logic and raising their voices loudly regarding the release of Fukushima contaminated water, which is worrisome. However, this knowledge should not be confined to specialized knowledge but should be shared as basic common sense within society. Unfortunately, the world has largely neglected natural science and allowed itself to be swayed by fears that harm the world.
{"title":"Honorary Professor at Oxford University states, `If you drink 1 litre of Fukushima, Japan nuclear plant treated water...`","authors":"Hwan-Gi Kim","doi":"10.59671/3b8cw","DOIUrl":"https://doi.org/10.59671/3b8cw","url":null,"abstract":"Wade Allison, Honorary Professor at Oxford University in the United Kingdom, claimed to be willing to drink 'Japan’s Fukushima treated water' in quantities greater than 1 litre. However, even if we assume it is treated water, it is not certain that drinking it would result in radiation exposure, but rather it might cause stomach discomfort. The definition of contaminated water can be described as \"water in a state where it is polluted or contains radioactive substances.\" On the other hand, treated water refers to water that has undergone specified water treatment in response to natural water sources. Fukushima effluents is only pre-treatment as ALPS process, so it is inadequate to simply call it treated water. In other hand, Korea’s Hanbit nuclear power plant discharged extremely warm effluent from cooling sea water in its plant condenser into the sea, which not only prevents fish from being caught in the nearby waters but also prevents the cultivation of seaweed. Currently, neighboring countries of Japan are relying on unscientific logic and raising their voices loudly regarding the release of Fukushima contaminated water, which is worrisome. However, this knowledge should not be confined to specialized knowledge but should be shared as basic common sense within society. Unfortunately, the world has largely neglected natural science and allowed itself to be swayed by fears that harm the world.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135612104","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Introduction: Obesity, a serious health problem that should be prevented because it causes many health problems, also negatively affects the quality of life and body image of individuals. This study was aimed at determining the relationship between and determinants of the perceived body image, patient satisfaction and quality of life of individuals who preferred Turkey to undergo bariatric surgery within the scope of medical tourism. Methodology: The population of the study consisted of 329 medical tourists who underwent bariatric surgery between 2015 and 2022 in private hospitals having health tourism authorization certificate in Samsun. Data were collected between September 01, 2021 and November 31, 2022 using the Personal Information Form, Body Image Scale, Quality Of Life Scale and Patient Satisfaction Scale. Descriptive statistics and the student t test, ANOVA test, correlation and multiple regression statistical analysis methods were used in the analysis of the data. Results: Of the participants, 37.4% were men and 62.6% were women. Their mean age was 39.74�10.063 years. According to the results obtained from the present study, patient satisfaction was affected by the variables such as age, education level, family type, monthly income, income status, exercise status, chronic disease status and perceived body image (p<0.05). On the other hand, the quality of life was affected by the variables such as perceived body image, marital status, education status, employment status, family type, income status, alcohol use, and exercise status (p<0.05). Patient satisfaction and quality of life were positively correlated with perceived body image of the participants who underwent bariatric surgery.Conclusion: According to the results of the study, patient satisfaction and quality of life were affected by socioeconomic characteristics and perceived body image of the participants, and perceived body image, patient satisfaction and quality of life were positively affected in the participants who underwent bariatric surgery.
{"title":"BODY IMAGE PERCEPTION, QUALITY OF LIFE AND PATIENT SATISFACTION IN BARIATRIC SURGERY PATIENTS: A STUDY ON MEDICAL TOURISTS","authors":"Yasar Demir, Saliha Ozpinar","doi":"10.59671/2sdvz","DOIUrl":"https://doi.org/10.59671/2sdvz","url":null,"abstract":"Introduction: Obesity, a serious health problem that should be prevented because it causes many health problems, also negatively affects the quality of life and body image of individuals. This study was aimed at determining the relationship between and determinants of the perceived body image, patient satisfaction and quality of life of individuals who preferred Turkey to undergo bariatric surgery within the scope of medical tourism. Methodology: The population of the study consisted of 329 medical tourists who underwent bariatric surgery between 2015 and 2022 in private hospitals having health tourism authorization certificate in Samsun. Data were collected between September 01, 2021 and November 31, 2022 using the Personal Information Form, Body Image Scale, Quality Of Life Scale and Patient Satisfaction Scale. Descriptive statistics and the student t test, ANOVA test, correlation and multiple regression statistical analysis methods were used in the analysis of the data. Results: Of the participants, 37.4% were men and 62.6% were women. Their mean age was 39.74�10.063 years. According to the results obtained from the present study, patient satisfaction was affected by the variables such as age, education level, family type, monthly income, income status, exercise status, chronic disease status and perceived body image (p<0.05). On the other hand, the quality of life was affected by the variables such as perceived body image, marital status, education status, employment status, family type, income status, alcohol use, and exercise status (p<0.05). Patient satisfaction and quality of life were positively correlated with perceived body image of the participants who underwent bariatric surgery.Conclusion: According to the results of the study, patient satisfaction and quality of life were affected by socioeconomic characteristics and perceived body image of the participants, and perceived body image, patient satisfaction and quality of life were positively affected in the participants who underwent bariatric surgery.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135650382","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
This study aimed to investigate the effectiveness of additive manufacturing-based teaching methods compared to traditional methods for teaching the Archimedes experiment in science education. Results showed that the additive manufacturing method was significantly more effective in enhancing students' understanding of the Archimedes principle and their ability to apply it to real-world scenarios. The customizable and hands-on nature of 3D printing also led to higher levels of student engagement and enjoyment. nHowever, limitations were identified in terms of the time, resources, and cost re-quired to set up the 3D printing experiment. Despite these limitations, our study suggests that additive manufacturing has the potential to revolutionize science education by providing students with a more engaging, hands-on, and customizable learning experience.
{"title":"The Impact of Additive Manufacturing on Teaching the Archimedes Experiment","authors":"Labinot Kastrati, Kaltrine Jakupi, Burim Uka, Gezim Hodolli","doi":"10.59671/uutoh","DOIUrl":"https://doi.org/10.59671/uutoh","url":null,"abstract":"This study aimed to investigate the effectiveness of additive manufacturing-based teaching methods compared to traditional methods for teaching the Archimedes experiment in science education. Results showed that the additive manufacturing method was significantly more effective in enhancing students' understanding of the Archimedes principle and their ability to apply it to real-world scenarios. The customizable and hands-on nature of 3D printing also led to higher levels of student engagement and enjoyment. nHowever, limitations were identified in terms of the time, resources, and cost re-quired to set up the 3D printing experiment. Despite these limitations, our study suggests that additive manufacturing has the potential to revolutionize science education by providing students with a more engaging, hands-on, and customizable learning experience.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136216916","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
The study proposes and discusses a model for knowledge production and truth discovery under the rubric of hosting versus control. The proposed model shows that there are two types of knowledge production methods. The first method is to control the phenomenon by studying it by knowing the initial root of the phenomenon or what the study calls a bottom-up method. The second method is the method of knowing the maximum extent of the phenomenon or its final path, which is what the study calls the method from top to bottom. The first method is the dominant method, while the second method is the suggested method. The study highlighted several applications of the proposed method in the fields of exact sciences, social sciences, history, arts, identity and the like. The final result of the study is that the different ways of producing knowledge lead to the same truth, but the difference is in the mode of the phenomenon or the special law that governs the phenomenon
{"title":"Miscellaneous applications to the accommodation versus control model (Approaching Suggested fields via economics Model)","authors":"Yassin Eltahir","doi":"10.59671/ktqdl","DOIUrl":"https://doi.org/10.59671/ktqdl","url":null,"abstract":"The study proposes and discusses a model for knowledge production and truth discovery under the rubric of hosting versus control. The proposed model shows that there are two types of knowledge production methods. The first method is to control the phenomenon by studying it by knowing the initial root of the phenomenon or what the study calls a bottom-up method. The second method is the method of knowing the maximum extent of the phenomenon or its final path, which is what the study calls the method from top to bottom. The first method is the dominant method, while the second method is the suggested method. The study highlighted several applications of the proposed method in the fields of exact sciences, social sciences, history, arts, identity and the like. The final result of the study is that the different ways of producing knowledge lead to the same truth, but the difference is in the mode of the phenomenon or the special law that governs the phenomenon","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"136003896","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
On one hand with AI advances and media becoming increasingly digitalized, there is the hope of getting a more peaceful world as well as futuristic features that will advance social order, justice, and civilization. Yet, the media does not genuinely advance societies since it distorts them and manipulates all types of information, leading to a loss of confidence practically all around the world, and leading humanity to social alienation. Media narratives and applications take us back to ideas that have been forgotten in the depth of history and show us how they are used in a variety of visual mediums, from TV show scripts to blockbuster films. As a result, we miss the opportunity to be truly, cognitively, emotionally, artistically, creatively, aesthetically, and intellectually human. Technically speaking, the type of common law used between the 12th - 19th century among the nations and civilizations where German culture predominates, the phrase"Pandectic law" is used to characterize the structure that Roman law developed through doctrine and practice. People in India, the Middle East, Rome, and nearly all of Europe once used such types of judgments. With the adoption of new legal and ethical criteria, national and international laws were modernized, and Pandect law was forgotten. However, it is still possible to see the traces and application of Pandect Law in many modern time narratives, especially Snowpiercer, which is one of the important films showing the dystopic future of humanity. This study aims to provide the links to see how modern media is taking its core power from myths and earlier times and connecting them to the predicted future of humanity even in the age of digitalization and AI. Specifically, the paper aims to exemplify the links between the Pandect Law of the 12th century and famous television serials or blockbuster films such as Snowpiercer. Based on a descriptive approach, this study aims to analyze the images, TV series, and movies using both structural and semiotic analysis methodology.
{"title":"PANDECT LAW IN MEDIA CULTURE: SNOWPIERCER ANALYSIS","authors":"Nilufer Pembecioglu","doi":"10.59671/jf7wn","DOIUrl":"https://doi.org/10.59671/jf7wn","url":null,"abstract":"On one hand with AI advances and media becoming increasingly digitalized, there is the hope of getting a more peaceful world as well as futuristic features that will advance social order, justice, and civilization. Yet, the media does not genuinely advance societies since it distorts them and manipulates all types of information, leading to a loss of confidence practically all around the world, and leading humanity to social alienation. Media narratives and applications take us back to ideas that have been forgotten in the depth of history and show us how they are used in a variety of visual mediums, from TV show scripts to blockbuster films. As a result, we miss the opportunity to be truly, cognitively, emotionally, artistically, creatively, aesthetically, and intellectually human. Technically speaking, the type of common law used between the 12th - 19th century among the nations and civilizations where German culture predominates, the phrase\"Pandectic law\" is used to characterize the structure that Roman law developed through doctrine and practice. People in India, the Middle East, Rome, and nearly all of Europe once used such types of judgments. With the adoption of new legal and ethical criteria, national and international laws were modernized, and Pandect law was forgotten. However, it is still possible to see the traces and application of Pandect Law in many modern time narratives, especially Snowpiercer, which is one of the important films showing the dystopic future of humanity. This study aims to provide the links to see how modern media is taking its core power from myths and earlier times and connecting them to the predicted future of humanity even in the age of digitalization and AI. Specifically, the paper aims to exemplify the links between the Pandect Law of the 12th century and famous television serials or blockbuster films such as Snowpiercer. Based on a descriptive approach, this study aims to analyze the images, TV series, and movies using both structural and semiotic analysis methodology.","PeriodicalId":13651,"journal":{"name":"Interciencia","volume":null,"pages":null},"PeriodicalIF":0.0,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135102905","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":4,"RegionCategory":"综合性期刊","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：