Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no1.5441
Akhmad Solikin, Yulfi Ainun Al Farizi, Yanantra Budi Pramana
Abstract - Overhead crane is a lifting tool used by almost all industries, ports, warehouses, workshops, and others. In general, the overhead crane control system is less effective and efficient because the operator still follows the direction of the crane's speed. In this case, problems often occur because the pendant switch which functions as a controller still uses a cable as a connector to the overhead crane panel. Various problems that often occur include cables breaking frequently due to being hit by a load lifted by the hoist, operators having difficulty setting a safe distance because they are limited by the length of the pendant switch cable. Based on the background of the problem, a control system is made which is expected to be able to control the overhead crane effectively and efficiently without using a cable as a connector but using an android smartphone. Control with an android smartphone using an android application with a wifi connection and an arduino uno R3 microcontroller. Based on the test results on this control system, device control can be controlled at a maximum distance of ± 100 meters as long as the device is still within wifi range. The control system can function optimally and the application can be installed on Android OS 4.0 (Jelly Bean) smartphones. Therefore, the use of a cable can be replaced with a wifi connection system to reduce friction with the cable and so that the operator can maintain a safe distance from the load to be moved because it is no longer limited by the length of the cable.
摘要:桥式起重机是几乎所有工业、港口、仓库、车间等使用的起重工具。一般来说，桥式起重机的控制系统效率较低，因为操作人员仍然遵循起重机速度的方向。在这种情况下，经常会出现问题，因为作为控制器的挂式开关仍然使用电缆作为桥式起重机面板的连接器。经常发生的各种问题包括，由于被提升机提升的负载撞击，电缆经常断裂，由于受悬挂开关电缆长度的限制，操作人员难以设定安全距离。基于这一问题的背景，设计了一种控制系统，期望能够在不使用电缆作为连接器的情况下，使用android智能手机对桥式起重机进行有效、高效的控制。使用带有wifi连接和arduino uno R3微控制器的android应用程序控制android智能手机。根据本控制系统的测试结果，只要设备仍在wifi范围内，就可以在±100米的距离内控制设备。控制系统可以优化运行，应用程序可以安装在Android OS 4.0 (Jelly Bean)智能手机上。因此，可以用wifi连接系统取代电缆的使用，以减少与电缆的摩擦，从而使操作员可以与要移动的负载保持安全距离，因为它不再受电缆长度的限制。
{"title":"Wireless Android-Based Control of Plastic Crane Roll Control Prototype","authors":"Akhmad Solikin, Yulfi Ainun Al Farizi, Yanantra Budi Pramana","doi":"10.36456/best.vol4.no1.5441","DOIUrl":"https://doi.org/10.36456/best.vol4.no1.5441","url":null,"abstract":"Abstract - Overhead crane is a lifting tool used by almost all industries, ports, warehouses, workshops, and others. In general, the overhead crane control system is less effective and efficient because the operator still follows the direction of the crane's speed. In this case, problems often occur because the pendant switch which functions as a controller still uses a cable as a connector to the overhead crane panel. Various problems that often occur include cables breaking frequently due to being hit by a load lifted by the hoist, operators having difficulty setting a safe distance because they are limited by the length of the pendant switch cable. Based on the background of the problem, a control system is made which is expected to be able to control the overhead crane effectively and efficiently without using a cable as a connector but using an android smartphone. Control with an android smartphone using an android application with a wifi connection and an arduino uno R3 microcontroller. Based on the test results on this control system, device control can be controlled at a maximum distance of ± 100 meters as long as the device is still within wifi range. The control system can function optimally and the application can be installed on Android OS 4.0 (Jelly Bean) smartphones. Therefore, the use of a cable can be replaced with a wifi connection system to reduce friction with the cable and so that the operator can maintain a safe distance from the load to be moved because it is no longer limited by the length of the cable.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129797833","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no1.5444
Sagita Rochman, A. Hermawan
The development of renewable energy is growing rapidly along with technological developments. One application of renewable energy is hydroelectric power (Water Turbine Generator). This study aims to design and manufacture a MHP using a permanent magnet generator with a screw type turbine and determine the output power generated from a MHP generator using a screw type turbine. In this research, an efficient and efficient MHP with screw type turbine will be developed. This research will be implemented in Doplang Tretek, Prambon Subdistrict, Sidoarjo Regency. MHP is a power plant whose driving force comes from water flowing from the highlands to the lowlands. By utilizing the water discharge PLTMH can function to produce electricity which is driven through a turbine and rotates a generator. The main components of MHP are turbine, generator, and water discharge. If one of these components is not present, the MHP cannot function. By utilizing MHP we can enjoy electricity for free, the power generated by MHP is still small <0.5-100kW. From the design of the PLTMH generator using a screw type turbine the output voltage is 9 volts with a water flow of 557 m3/s. The greater the flow of water flowing in the cross section of the turbine, the faster the resulting rpm.
{"title":"Design and Construction of Screw Type Micro Hydro Power Plant","authors":"Sagita Rochman, A. Hermawan","doi":"10.36456/best.vol4.no1.5444","DOIUrl":"https://doi.org/10.36456/best.vol4.no1.5444","url":null,"abstract":"The development of renewable energy is growing rapidly along with technological developments. One application of renewable energy is hydroelectric power (Water Turbine Generator). This study aims to design and manufacture a MHP using a permanent magnet generator with a screw type turbine and determine the output power generated from a MHP generator using a screw type turbine. In this research, an efficient and efficient MHP with screw type turbine will be developed. This research will be implemented in Doplang Tretek, Prambon Subdistrict, Sidoarjo Regency. MHP is a power plant whose driving force comes from water flowing from the highlands to the lowlands. By utilizing the water discharge PLTMH can function to produce electricity which is driven through a turbine and rotates a generator. The main components of MHP are turbine, generator, and water discharge. If one of these components is not present, the MHP cannot function. By utilizing MHP we can enjoy electricity for free, the power generated by MHP is still small <0.5-100kW. From the design of the PLTMH generator using a screw type turbine the output voltage is 9 volts with a water flow of 557 m3/s. The greater the flow of water flowing in the cross section of the turbine, the faster the resulting rpm.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"160 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131988755","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no1.5445
Hamam Nasirrudin, Budi Prijo Sembodo
In Indonesia, the usage of electrical energy is still poorly handled. Few people realize how important it is to conserve electricity. Electricity waste, such as the usage of air conditoner (AC) and lighting, is more common in public buildings. Few People realize how important it is to conserve electricity. Electricity waste, such as the usage of air conditioners (AC) and lighting, is more common in public buildings. The goal of this study is to find a way to reduce electricity waste. The HCSR04 Ultrasonic sensor is used to detect things in this system, and the signal from the sensor is received by Arduino Uno and processed into data. Following the processing of the data, the Arduino Uno instructs the AC and lights to turn on, as well as the LCD to display the identified items. This system is put on a table near the room’s door for use. The system as a whole can function well after testing.
{"title":"Control System Automatic for Light And Air Conditioner at Living Room using Arduino Uno Controller","authors":"Hamam Nasirrudin, Budi Prijo Sembodo","doi":"10.36456/best.vol4.no1.5445","DOIUrl":"https://doi.org/10.36456/best.vol4.no1.5445","url":null,"abstract":"In Indonesia, the usage of electrical energy is still poorly handled. Few people realize how important it is to conserve electricity. Electricity waste, such as the usage of air conditoner (AC) and lighting, is more common in public buildings. Few People realize how important it is to conserve electricity. Electricity waste, such as the usage of air conditioners (AC) and lighting, is more common in public buildings. The goal of this study is to find a way to reduce electricity waste. The HCSR04 Ultrasonic sensor is used to detect things in this system, and the signal from the sensor is received by Arduino Uno and processed into data. Following the processing of the data, the Arduino Uno instructs the AC and lights to turn on, as well as the LCD to display the identified items. This system is put on a table near the room’s door for use. The system as a whole can function well after testing.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114294500","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no01.5343
Akbar Sujiwa, Iwan Santoso
In this era of globalization, technological developments are very rapid penetrated in all fields in particular. in the food and beverage sector..During a pandemic like this, as entrepreneurs, food and drink must adapt. Adaptation in question is hygiene in the process of making drinks and food. One example. it is an automatic drink making machine. that can help in the process. make drinks more practical and hygienic to keep more sterile. when making drinks in terms of blending drink ingredients. the process of stirring and pouring hot water. In an automatic drink making machine, in a supermarket there are still many weaknesses. ie the user is still making physical contact, such as approaching and selecting the menu and waiting for the process to complete. Based on the problems that exist among the general public, an idea was formed to design and manufacture an Internet of Things (IOT) based automatic drinking machine. which can help users in terms of making a drink. Users only need to select the drink menu that they want to make on the Android smartphone application that is connected to the access point, then the machine will carry out the process of making drinks. according to the menu selected in the application. The user only takes drinks to the places that are available. Based on the results of testing and analysis carried out on a machine this helps users to place orders and can enjoy drinks that are processed automatically.
{"title":"Automatic Coffee Maker Machine Based on Internet of Things (IoT)","authors":"Akbar Sujiwa, Iwan Santoso","doi":"10.36456/best.vol4.no01.5343","DOIUrl":"https://doi.org/10.36456/best.vol4.no01.5343","url":null,"abstract":"In this era of globalization, technological developments are very rapid penetrated in all fields in particular. in the food and beverage sector..During a pandemic like this, as entrepreneurs, food and drink must adapt. Adaptation in question is hygiene in the process of making drinks and food. One example. it is an automatic drink making machine. that can help in the process. make drinks more practical and hygienic to keep more sterile. when making drinks in terms of blending drink ingredients. the process of stirring and pouring hot water. In an automatic drink making machine, in a supermarket there are still many weaknesses. ie the user is still making physical contact, such as approaching and selecting the menu and waiting for the process to complete. Based on the problems that exist among the general public, an idea was formed to design and manufacture an Internet of Things (IOT) based automatic drinking machine. which can help users in terms of making a drink. Users only need to select the drink menu that they want to make on the Android smartphone application that is connected to the access point, then the machine will carry out the process of making drinks. according to the menu selected in the application. The user only takes drinks to the places that are available. Based on the results of testing and analysis carried out on a machine this helps users to place orders and can enjoy drinks that are processed automatically.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126831246","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no1.5447
Adi Winarno, M. Affandi
IoT (Internet of Things) is a concept that aims to expand the benefits of continuously connected internet connectivity continuously. IoT can be used at home as a smart home system for controlling electronic equipment that can be operated by means ofinternet connection (WiFi). This IoT-based smart home system uses ESP 8266 microcontroller as hardware and blynk application as a tool controller and control. This system consists of a lamp controller, knowing humidity and room temperature, detection of human movement at home abandoned, early detection of fire sources to prevent house fires, and LPG gas leak detector for home security. There are four sensors used are PIR sensors to detect human movement, MQ2 sensor to detect LPG gas leaks, flame sensor to detect LPG gas leaks early detection of fire, and the DHT11 sensor to determine humidity and temperature. The design of this system uses a relay which is used as a liaison lamp with system.
物联网(Internet of Things)是一个旨在不断扩大持续连接的互联网连接的好处的概念。物联网可以作为智能家居系统在家中使用，用于控制可以通过互联网连接(WiFi)操作的电子设备。基于物联网的智能家居系统采用ESP 8266单片机作为硬件，blynk应用作为工具控制器和控制器。该系统由灯具控制器组成，可了解湿度和室温，检测家中废弃的人员活动，早期检测火源以防止房屋火灾，以及用于家庭安全的LPG气体泄漏探测器。使用了四种传感器，分别是用于检测人体运动的PIR传感器，用于检测LPG气体泄漏的MQ2传感器，用于检测LPG气体泄漏的火焰传感器，用于检测火灾的早期检测，以及用于确定湿度和温度的DHT11传感器。本系统的设计采用继电器作为与系统的联络灯。
{"title":"Design and Construction of Smart House Prototype Based Internet of Things (Iot) Using Esp8266","authors":"Adi Winarno, M. Affandi","doi":"10.36456/best.vol4.no1.5447","DOIUrl":"https://doi.org/10.36456/best.vol4.no1.5447","url":null,"abstract":"IoT (Internet of Things) is a concept that aims to expand the benefits of continuously connected internet connectivity continuously. IoT can be used at home as a smart home system for controlling electronic equipment that can be operated by means ofinternet connection (WiFi). This IoT-based smart home system uses ESP 8266 microcontroller as hardware and blynk application as a tool controller and control. This system consists of a lamp controller, knowing humidity and room temperature, detection of human movement at home abandoned, early detection of fire sources to prevent house fires, and LPG gas leak detector for home security. There are four sensors used are PIR sensors to detect human movement, MQ2 sensor to detect LPG gas leaks, flame sensor to detect LPG gas leaks early detection of fire, and the DHT11 sensor to determine humidity and temperature. The design of this system uses a relay which is used as a liaison lamp with system.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129930170","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2022-03-22DOI: 10.36456/best.vol4.no1.5442
Widodo ., Nur Hidayat
ABSTRACT The process of winding fiber optic cable rolls takes a long time because it is done manually or conventionally. One of the tools in winding is a FO cable roller. This tool is designed to be able to roll fiber optic cables, but the limitations of this tool are still done manually, FO cables are rolled by hand like pedaling a bicycle on the pedals, the speed is set based on the speed of the rotation of the hand and it all depends on the human factor. Therefore, there is a need for an Automatic Fiber Optic Cable Winder Using NodeMCU ESP8266 and using Iot (Web of Things) to be more efficient and better in cable winding expositions.
{"title":"Design And Development Of Automatic Fiber Optic Cable Roller Using Nodemcu Esp 8266 Module","authors":"Widodo ., Nur Hidayat","doi":"10.36456/best.vol4.no1.5442","DOIUrl":"https://doi.org/10.36456/best.vol4.no1.5442","url":null,"abstract":"ABSTRACT The process of winding fiber optic cable rolls takes a long time because it is done manually or conventionally. One of the tools in winding is a FO cable roller. This tool is designed to be able to roll fiber optic cables, but the limitations of this tool are still done manually, FO cables are rolled by hand like pedaling a bicycle on the pedals, the speed is set based on the speed of the rotation of the hand and it all depends on the human factor. Therefore, there is a need for an Automatic Fiber Optic Cable Winder Using NodeMCU ESP8266 and using Iot (Web of Things) to be more efficient and better in cable winding expositions.","PeriodicalId":141660,"journal":{"name":"BEST : Journal of Applied Electrical, Science, & Technology","volume":"75 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132802666","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：