Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500503
Y. Gorbatkina, O. Zhuravleva, V. G. Ivanova-Mumzhieva, V. Chebotarev
The concentration dependences of the adhesive strength, τ, of joints of 150 μm diameter steel wire and modified epoxy binder were investigated. The modifier used was PSK-1 polysulphone of different molecular weight, M. The concentration, C, of PSK-1 was varied from 5 to 20 wt%. It was shown that the form of the τ-C curves changes with change in M. At M = 5000 and 10 000, τ is not dependent on C; at M = 17 000 and 27 000, the τ-C relationship is described by a curve with a maximum. At M = 35 000 and 42 000, the adhesive strength decreases with increase in C. The factors affecting the measured value of τ in the case of epoxides modified with heat-resistant thermoplastics are considered.
{"title":"The Influence of the Molecular Weight of Polysulphone on the Adhesion of Epoxy/Polysulphone Binders to Fibres:","authors":"Y. Gorbatkina, O. Zhuravleva, V. G. Ivanova-Mumzhieva, V. Chebotarev","doi":"10.1177/0307174X1804500503","DOIUrl":"https://doi.org/10.1177/0307174X1804500503","url":null,"abstract":"The concentration dependences of the adhesive strength, τ, of joints of 150 μm diameter steel wire and modified epoxy binder were investigated. The modifier used was PSK-1 polysulphone of different molecular weight, M. The concentration, C, of PSK-1 was varied from 5 to 20 wt%. It was shown that the form of the τ-C curves changes with change in M. At M = 5000 and 10 000, τ is not dependent on C; at M = 17 000 and 27 000, the τ-C relationship is described by a curve with a maximum. At M = 35 000 and 42 000, the adhesive strength decreases with increase in C. The factors affecting the measured value of τ in the case of epoxides modified with heat-resistant thermoplastics are considered.","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"11 1","pages":"201-204"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89508440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500502
A. Mikitaev, A. Salamov, A. A. Beev, D. A. Beeva
Aromatic polyether ether ketones are polymers whose volume of production is now increasing at a rapid rate, which is due to the important array of service properties of these polymers. Certain proc...
{"title":"The Filling of Polyether Ether Ketones as a Way of Producing Composites with High Service Properties","authors":"A. Mikitaev, A. Salamov, A. A. Beev, D. A. Beeva","doi":"10.1177/0307174X1804500502","DOIUrl":"https://doi.org/10.1177/0307174X1804500502","url":null,"abstract":"Aromatic polyether ether ketones are polymers whose volume of production is now increasing at a rapid rate, which is due to the important array of service properties of these polymers. Certain proc...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"167 1","pages":"197-200"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"73957332","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500506
E. S. Baganova, O. Davydova, M. Buzaeva, E. Klimov, A. N. Fomin, V. Svetukhin, K. Nishchev, A. Pynenkov
Polymer composites including modified multiwall carbon nanotubes were obtained by the block polymerisation of triethylene glycol dimethacrylate. The heat stability and microhardness of the material...
采用嵌段聚合法制备了含改性多壁碳纳米管的聚合物复合材料。材料的热稳定性和显微硬度…
{"title":"An Acrylic Polymer Composite with the Inclusion of Multiwall Carbon Nanotubes","authors":"E. S. Baganova, O. Davydova, M. Buzaeva, E. Klimov, A. N. Fomin, V. Svetukhin, K. Nishchev, A. Pynenkov","doi":"10.1177/0307174X1804500506","DOIUrl":"https://doi.org/10.1177/0307174X1804500506","url":null,"abstract":"Polymer composites including modified multiwall carbon nanotubes were obtained by the block polymerisation of triethylene glycol dimethacrylate. The heat stability and microhardness of the material...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"1 1","pages":"213-216"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91183699","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500206
N. Kakhramanov, V. Osipchik, N. Arzumanova, A. D. Kuliev, R. N. Lalaeva, L. Khamedova, N. Ishchenko
The effect of quartz four, whiting, and cement on the physicomechanical properties of filled polymer composites based on a statistical polypropylene copolymer – random polypropylene copolymer – was...
{"title":"The Effect of Mineral Fillers on the Main Physicomechanical Properties of Random Polypropylene Copolymers","authors":"N. Kakhramanov, V. Osipchik, N. Arzumanova, A. D. Kuliev, R. N. Lalaeva, L. Khamedova, N. Ishchenko","doi":"10.1177/0307174X1804500206","DOIUrl":"https://doi.org/10.1177/0307174X1804500206","url":null,"abstract":"The effect of quartz four, whiting, and cement on the physicomechanical properties of filled polymer composites based on a statistical polypropylene copolymer – random polypropylene copolymer – was...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"9 1","pages":"59-62"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90309369","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500301
V. Zhorin, M. Kiselev
Mixtures of polyethylene and 80% germanium dioxide, magnesium, magnesium oxide, and sodium chloride were subjected to plastic deformation under a pressure of 0.5–4.0 GPa, and were then investigated...
{"title":"The Thermal Processes within Polyethylene in Mixtures with a High Content of Inorganic Components after Plastic Deformation under High Pressure","authors":"V. Zhorin, M. Kiselev","doi":"10.1177/0307174X1804500301","DOIUrl":"https://doi.org/10.1177/0307174X1804500301","url":null,"abstract":"Mixtures of polyethylene and 80% germanium dioxide, magnesium, magnesium oxide, and sodium chloride were subjected to plastic deformation under a pressure of 0.5–4.0 GPa, and were then investigated...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"15 1","pages":"79-86"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"89026793","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500207
B. B. Akhrarov, M. U. Allamuratov, B. Mukhamedgaliev
Certain questions of the fire protection of wooden structural materials, chipboard, and binding agents are examined. The mechanisms of chemical fire protection and the kinetic laws governing the pr...
对木结构材料、刨花板和粘合剂的防火问题进行了检查。探讨了化学防火的机理和化学防火的动力学规律。
{"title":"An Investigation of the Combustion of Fire-Protected Wooden Materials Modified with Polymer Fireproofing Agents:","authors":"B. B. Akhrarov, M. U. Allamuratov, B. Mukhamedgaliev","doi":"10.1177/0307174X1804500207","DOIUrl":"https://doi.org/10.1177/0307174X1804500207","url":null,"abstract":"Certain questions of the fire protection of wooden structural materials, chipboard, and binding agents are examined. The mechanisms of chemical fire protection and the kinetic laws governing the pr...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"39 1","pages":"63-66"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"91516837","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500303
N. S. Dikanova, A. Matseevich, O. V. Kovriga, A. Askadskii, T. Kravchenko, V. Aristov
The effect of nanotubes and nanofibres on the stress relaxation of nanocomposites based on high-density polyethylene (HDPE) was studied. It was found that a very low concentration of multiwall nano...
{"title":"Investigation of the Relaxation Mechanical Properties of Nanocomposites Based on High-Density Polyethylene:","authors":"N. S. Dikanova, A. Matseevich, O. V. Kovriga, A. Askadskii, T. Kravchenko, V. Aristov","doi":"10.1177/0307174X1804500303","DOIUrl":"https://doi.org/10.1177/0307174X1804500303","url":null,"abstract":"The effect of nanotubes and nanofibres on the stress relaxation of nanocomposites based on high-density polyethylene (HDPE) was studied. It was found that a very low concentration of multiwall nano...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"82 1","pages":"91-96"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"90919741","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500306
A. B. Baranov, I. D. Simonov-Emel'yanov, P. Surikov
The rheological characteristics of a melt of home-produced polysulphone of grade PSF-190 with processing additives of different nature – silsesquioxane, fluorine-containing, and polymethylsiloxane ...
{"title":"The Effect of Rheological Additives on the Flow of Polysulphone Melts","authors":"A. B. Baranov, I. D. Simonov-Emel'yanov, P. Surikov","doi":"10.1177/0307174X1804500306","DOIUrl":"https://doi.org/10.1177/0307174X1804500306","url":null,"abstract":"The rheological characteristics of a melt of home-produced polysulphone of grade PSF-190 with processing additives of different nature – silsesquioxane, fluorine-containing, and polymethylsiloxane ...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"102 1","pages":"107-110"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"79167370","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500308
M. U. Allamuratov, B. Mukhamedgaliev
Certain possibilities of synthesising new water-soluble polymers based on chemical industry waste and local raw materials are considered. By using the latest methods of analysis, the composition, s...
考虑了利用化学工业废料和当地原料合成新型水溶性聚合物的可能性。通过使用最新的分析方法，……
{"title":"New Polymer Stabilisers for Soils and Subsoils and an Investigation of their Properties","authors":"M. U. Allamuratov, B. Mukhamedgaliev","doi":"10.1177/0307174X1804500308","DOIUrl":"https://doi.org/10.1177/0307174X1804500308","url":null,"abstract":"Certain possibilities of synthesising new water-soluble polymers based on chemical industry waste and local raw materials are considered. By using the latest methods of analysis, the composition, s...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"37 1","pages":"119-122"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"76585047","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Pub Date : 2018-09-04DOI: 10.1177/0307174X1804500108
Y. Kadykova, K. D. Lur'e
Technology has been developed for polycondensation combination of the main components of polymer matrix composites, a special feature of which is the combination of the process of phenol formaldehy...
高分子基复合材料主要组分的缩聚组合技术已被开发出来，其特点是苯酚-甲醛-复合材料的缩聚组合工艺。
{"title":"The Polycondensation Method of Combining the Main Components in the Production of Polymer Matrix Composites Based on Basalt Strands","authors":"Y. Kadykova, K. D. Lur'e","doi":"10.1177/0307174X1804500108","DOIUrl":"https://doi.org/10.1177/0307174X1804500108","url":null,"abstract":"Technology has been developed for polycondensation combination of the main components of polymer matrix composites, a special feature of which is the combination of the process of phenol formaldehy...","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"68 1","pages":"31-34"},"PeriodicalIF":0.0,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77144171","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
京ICP备2023020795号-1
扫码关注我们
求助内容：
应助结果提醒方式：